Due to some recent optimization done in the way the mac address
bytes are written into the OTP memory, some AR9485 chipsets were
forced to use the first byte from the eeprom template and the
remaining bytes are read from OTP.
AR9485 happens to use generic eeprom template which has 0x1 as
the first byte causes issues in bringing up the card.
So fixed the eeprom template accordingly to address the issue.
Cc: [email protected]
Cc: Paul Stewart <[email protected]>
Signed-off-by: Senthil Balasubramanian <[email protected]>
---
drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index cb8bcc4..3b4ae07 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -69,7 +69,7 @@ static int ar9003_hw_power_interpolate(int32_t x,
static const struct ar9300_eeprom ar9300_default = {
.eepromVersion = 2,
.templateVersion = 2,
- .macAddr = {1, 2, 3, 4, 5, 6},
+ .macAddr = {0, 2, 3, 4, 5, 6},
.custData = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
.baseEepHeader = {
--
1.7.4.4