From: Mohammed Shafi Shajakhan <[email protected]>
in ath_pci_resume it seems we are not enabling LED properly, in addition
we have a PS wrapper fix for this
Signed-off-by: Mohammed Shafi Shajakhan <[email protected]>
---
drivers/net/wireless/ath/ath9k/pci.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index 891661a..5733faf 100644
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -332,16 +332,16 @@ static int ath_pci_resume(struct device *device)
if ((val & 0x0000ff00) != 0)
pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
+ ath9k_ps_wakeup(sc);
/* Enable LED */
ath9k_hw_cfg_output(sc->sc_ah, sc->sc_ah->led_pin,
AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
- ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 1);
+ ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 0);
/*
* Reset key cache to sane defaults (all entries cleared) instead of
* semi-random values after suspend/resume.
*/
- ath9k_ps_wakeup(sc);
ath9k_cmn_init_crypto(sc->sc_ah);
ath9k_ps_restore(sc);
--
1.7.0.4