IQ calibration during fast channel change sometimes failed
with RTT. And also restoring invalid radio retention readings
during init cal could cause failure to set the channel properly.
This patch counts the valid rtt history readings and clears
rtt mask.
Signed-off-by: Rajkumar Manoharan <[email protected]>
---
drivers/net/wireless/ath/ath9k/ar9003_calib.c | 8 ++++++--
1 files changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
index 16851cb..a4cd161 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -908,12 +908,15 @@ static bool ar9003_hw_rtt_restore(struct ath_hw *ah, struct ath9k_channel *chan)
int i;
bool restore;
- if (!(ah->caps.hw_caps & ATH9K_HW_CAP_RTT) || !ah->caldata)
+ if (!ah->caldata)
return false;
hist = &ah->caldata->rtt_hist;
+ if (!hist->num_readings)
+ return false;
+
ar9003_hw_rtt_enable(ah);
- ar9003_hw_rtt_set_mask(ah, 0x10);
+ ar9003_hw_rtt_set_mask(ah, 0x00);
for (i = 0; i < AR9300_MAX_CHAINS; i++) {
if (!(ah->rxchainmask & (1 << i)))
continue;
@@ -1070,6 +1073,7 @@ skip_tx_iqcal:
if (is_reusable && (hist->num_readings < RTT_HIST_MAX)) {
u32 *table;
+ hist->num_readings++;
for (i = 0; i < AR9300_MAX_CHAINS; i++) {
if (!(ah->rxchainmask & (1 << i)))
continue;
--
1.7.7