Notify user-space about probe-response offloading support in the driver.
A wiphy flag is used to indicate support and a bitmap of protocols
determines which protocols are supported.
Signed-off-by: Guy Eilam <[email protected]>
Signed-off-by: Arik Nemtsov <[email protected]>
---
v3->4:
- Add missing documentation
- Make comments more explicit about probe-resp offloading being always
in-effect for supporting devices.
include/linux/nl80211.h | 28 ++++++++++++++++++++++++++++
include/net/cfg80211.h | 10 ++++++++++
net/wireless/nl80211.c | 5 +++++
3 files changed, 43 insertions(+), 0 deletions(-)
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 8049bf7..e468d0b 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -1109,6 +1109,11 @@ enum nl80211_commands {
* %NL80211_CMD_TDLS_MGMT. Otherwise %NL80211_CMD_TDLS_OPER should be
* used for asking the driver to perform a TDLS operation.
*
+ * @NL80211_ATTR_PROBE_RESP_OFFLOAD: Indicates that the HW responds to probe
+ * requests while operating in AP-mode.
+ * This attribute holds a bitmap of the supported protocols for
+ * offloading (see &enum nl80211_probe_resp_offload_support_attr).
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
@@ -1337,6 +1342,8 @@ enum nl80211_attrs {
NL80211_ATTR_TDLS_SUPPORT,
NL80211_ATTR_TDLS_EXTERNAL_SETUP,
+ NL80211_ATTR_PROBE_RESP_OFFLOAD_SUPPORT,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -2650,4 +2657,25 @@ enum nl80211_tdls_operation {
NL80211_TDLS_DISABLE_LINK,
};
+/**
+ * enum nl80211_probe_resp_offload_support_attr - optional supported
+ * protocols for probe-response offloading by the driver/FW.
+ * To be used with the %NL80211_ATTR_PROBE_RESP_OFFLOAD attribute.
+ * Each enum value represents a bit in the bitmap of supported
+ * protocols. Typically a subset of probe-requests belonging to a
+ * supported protocol will be excluded from offload and uploaded
+ * to the host.
+ *
+ * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS: Support for WPS ver. 1
+ * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2: Support for WPS ver. 2
+ * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P: Support for P2P
+ * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U: Support for 802.11u
+ */
+enum nl80211_probe_resp_offload_support_attr {
+ NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS = 1<<0,
+ NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 = 1<<1,
+ NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P = 1<<2,
+ NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U = 1<<3,
+};
+
#endif /* __LINUX_NL80211_H */
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 92cf1c2..9e8aa88 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1675,6 +1675,8 @@ struct cfg80211_ops {
* teardown packets should be sent through the @NL80211_CMD_TDLS_MGMT
* command. When this flag is not set, @NL80211_CMD_TDLS_OPER should be
* used for asking the driver/firmware to perform a TDLS operation.
+ * @WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD: When operating as an AP, the device
+ * responds to probe-requests in hardware.
*/
enum wiphy_flags {
WIPHY_FLAG_CUSTOM_REGULATORY = BIT(0),
@@ -1693,6 +1695,7 @@ enum wiphy_flags {
WIPHY_FLAG_AP_UAPSD = BIT(14),
WIPHY_FLAG_SUPPORTS_TDLS = BIT(15),
WIPHY_FLAG_TDLS_EXTERNAL_SETUP = BIT(16),
+ WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD = BIT(17),
};
/**
@@ -1956,6 +1959,13 @@ struct wiphy {
u32 available_antennas_tx;
u32 available_antennas_rx;
+ /*
+ * Bitmap of supported protocols for probe response offloading
+ * see &enum nl80211_probe_resp_offload_support_attr. Only valid
+ * when the wiphy flag @WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD is set.
+ */
+ u32 probe_resp_offload;
+
/* If multiple wiphys are registered and you're handed e.g.
* a regular netdev with assigned ieee80211_ptr, you won't
* know whether it points to a wiphy your driver has registered
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index b3a476f..62acdb8 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -758,6 +758,11 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
NLA_PUT_U32(msg, NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX,
dev->wiphy.available_antennas_rx);
+ if (dev->wiphy.flags & WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD)
+ NLA_PUT_U32(msg,
+ NL80211_ATTR_PROBE_RESP_OFFLOAD_SUPPORT,
+ dev->wiphy.probe_resp_offload);
+
if ((dev->wiphy.available_antennas_tx ||
dev->wiphy.available_antennas_rx) && dev->ops->get_antenna) {
u32 tx_ant = 0, rx_ant = 0;
--
1.7.5.4
Allow setting a probe response template for an interface operating in
AP mode. Low level drivers are notified about changes in the probe
response template and are able to retrieve a copy of the current probe
response. This data can, for example, be uploaded to hardware as a
template.
Signed-off-by: Guy Eilam <[email protected]>
Signed-off-by: Arik Nemtsov <[email protected]>
---
v3->4: remove a spurious check and debug print
include/net/mac80211.h | 15 +++++++++++++++
net/mac80211/cfg.c | 38 +++++++++++++++++++++++++++++++++++---
net/mac80211/ieee80211_i.h | 1 +
net/mac80211/iface.c | 6 +++++-
net/mac80211/tx.c | 31 +++++++++++++++++++++++++++++++
net/mac80211/util.c | 3 ++-
6 files changed, 89 insertions(+), 5 deletions(-)
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 72eddd1..0f1d784 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -166,6 +166,7 @@ struct ieee80211_low_level_stats {
* that it is only ever disabled for station mode.
* @BSS_CHANGED_IDLE: Idle changed for this BSS/interface.
* @BSS_CHANGED_SSID: SSID changed for this BSS (AP mode)
+ * @BSS_CHANGED_AP_PROBE_RESP: Probe Response changed for this BSS (AP mode)
*/
enum ieee80211_bss_change {
BSS_CHANGED_ASSOC = 1<<0,
@@ -184,6 +185,7 @@ enum ieee80211_bss_change {
BSS_CHANGED_QOS = 1<<13,
BSS_CHANGED_IDLE = 1<<14,
BSS_CHANGED_SSID = 1<<15,
+ BSS_CHANGED_AP_PROBE_RESP = 1<<16,
/* when adding here, make sure to change ieee80211_reconfig */
};
@@ -2661,6 +2663,19 @@ static inline struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
}
/**
+ * ieee80211_proberesp_get - retrieve a Probe Response template
+ * @hw: pointer obtained from ieee80211_alloc_hw().
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ *
+ * Creates a Probe Response template which can, for example, be uploaded to
+ * hardware. The destination address should be set by the caller.
+ *
+ * Can only be called in AP mode.
+ */
+struct sk_buff *ieee80211_proberesp_get(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif);
+
+/**
* ieee80211_pspoll_get - retrieve a PS Poll template
* @hw: pointer obtained from ieee80211_alloc_hw().
* @vif: &struct ieee80211_vif pointer from the add_interface callback.
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index a9ded52..be99b1b 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -488,6 +488,31 @@ static void ieee80211_config_ap_ssid(struct ieee80211_sub_if_data *sdata,
(params->hidden_ssid != NL80211_HIDDEN_SSID_NOT_IN_USE);
}
+static int ieee80211_set_probe_resp(struct ieee80211_sub_if_data *sdata,
+ u8 *resp, size_t resp_len)
+{
+ struct sk_buff *new, *old;
+
+ if (!resp || !resp_len)
+ return -EINVAL;
+
+ old = sdata->u.ap.probe_resp;
+
+ new = dev_alloc_skb(resp_len);
+ if (!new)
+ return -ENOMEM;
+
+ memcpy(skb_put(new, resp_len), resp, resp_len);
+
+ rcu_assign_pointer(sdata->u.ap.probe_resp, new);
+ synchronize_rcu();
+
+ if (old)
+ dev_kfree_skb(old);
+
+ return 0;
+}
+
/*
* This handles both adding a beacon and setting new beacon info
*/
@@ -498,6 +523,7 @@ static int ieee80211_config_beacon(struct ieee80211_sub_if_data *sdata,
int new_head_len, new_tail_len;
int size;
int err = -EINVAL;
+ u32 changed = 0;
old = rtnl_dereference(sdata->u.ap.beacon);
@@ -581,11 +607,17 @@ static int ieee80211_config_beacon(struct ieee80211_sub_if_data *sdata,
kfree(old);
+ err = ieee80211_set_probe_resp(sdata, params->probe_resp,
+ params->probe_resp_len);
+ if (!err)
+ changed |= BSS_CHANGED_AP_PROBE_RESP;
+
ieee80211_config_ap_ssid(sdata, params);
+ changed |= BSS_CHANGED_BEACON_ENABLED |
+ BSS_CHANGED_BEACON |
+ BSS_CHANGED_SSID;
- ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED |
- BSS_CHANGED_BEACON |
- BSS_CHANGED_SSID);
+ ieee80211_bss_info_change_notify(sdata, changed);
return 0;
}
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index ea10a51..5a351cc 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -228,6 +228,7 @@ struct beacon_data {
struct ieee80211_if_ap {
struct beacon_data __rcu *beacon;
+ struct sk_buff __rcu *probe_resp;
struct list_head vlans;
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index ef741e8..74d6f79 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -450,15 +450,19 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata,
struct ieee80211_sub_if_data *vlan, *tmpsdata;
struct beacon_data *old_beacon =
rtnl_dereference(sdata->u.ap.beacon);
+ struct sk_buff *old_probe_resp =
+ rtnl_dereference(sdata->u.ap.probe_resp);
/* sdata_running will return false, so this will disable */
ieee80211_bss_info_change_notify(sdata,
BSS_CHANGED_BEACON_ENABLED);
- /* remove beacon */
+ /* remove beacon and probe response */
rcu_assign_pointer(sdata->u.ap.beacon, NULL);
+ rcu_assign_pointer(sdata->u.ap.probe_resp, NULL);
synchronize_rcu();
kfree(old_beacon);
+ kfree(old_probe_resp);
/* down all dependent devices, that is VLANs */
list_for_each_entry_safe(vlan, tmpsdata, &sdata->u.ap.vlans,
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 48bbb96..6b86f77 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -2354,6 +2354,37 @@ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw,
}
EXPORT_SYMBOL(ieee80211_beacon_get_tim);
+struct sk_buff *ieee80211_proberesp_get(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif)
+{
+ struct ieee80211_if_ap *ap = NULL;
+ struct sk_buff *presp = NULL, *skb = NULL;
+ struct ieee80211_hdr *hdr;
+ struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
+
+ if (sdata->vif.type != NL80211_IFTYPE_AP)
+ return NULL;
+
+ rcu_read_lock();
+
+ ap = &sdata->u.ap;
+ presp = rcu_dereference(ap->probe_resp);
+ if (!presp)
+ goto out;
+
+ skb = skb_copy(presp, GFP_ATOMIC);
+ if (!skb)
+ goto out;
+
+ hdr = (struct ieee80211_hdr *) skb->data;
+ memset(hdr->addr1, 0, sizeof(hdr->addr1));
+
+out:
+ rcu_read_unlock();
+ return skb;
+}
+EXPORT_SYMBOL(ieee80211_proberesp_get);
+
struct sk_buff *ieee80211_pspoll_get(struct ieee80211_hw *hw,
struct ieee80211_vif *vif)
{
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 7439d26..d6d3ef4 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1085,7 +1085,8 @@ int ieee80211_reconfig(struct ieee80211_local *local)
changed |= BSS_CHANGED_IBSS;
/* fall through */
case NL80211_IFTYPE_AP:
- changed |= BSS_CHANGED_SSID;
+ changed |= BSS_CHANGED_SSID |
+ BSS_CHANGED_AP_PROBE_RESP;
/* fall through */
case NL80211_IFTYPE_MESH_POINT:
changed |= BSS_CHANGED_BEACON |
--
1.7.5.4
Pass probe-response data from usermode via beacon parameters.
Signed-off-by: Guy Eilam <[email protected]>
Signed-off-by: Arik Nemtsov <[email protected]>
---
v3->4:
Document contents of the probe-resp attribute
include/linux/nl80211.h | 6 ++++++
include/net/cfg80211.h | 4 ++++
net/wireless/nl80211.c | 9 +++++++++
3 files changed, 19 insertions(+), 0 deletions(-)
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index e468d0b..c901c6b 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -1114,6 +1114,10 @@ enum nl80211_commands {
* This attribute holds a bitmap of the supported protocols for
* offloading (see &enum nl80211_probe_resp_offload_support_attr).
*
+ * @NL80211_ATTR_PROBE_RESP: Probe Response template data. Contains the entire
+ * probe-response frame. The DA field in the 802.11 header is zero-ed out,
+ * to be filled by the FW.
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
@@ -1344,6 +1348,8 @@ enum nl80211_attrs {
NL80211_ATTR_PROBE_RESP_OFFLOAD_SUPPORT,
+ NL80211_ATTR_PROBE_RESP,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 9e8aa88..713c17b 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -391,6 +391,8 @@ struct cfg80211_crypto_settings {
* @assocresp_ies: extra information element(s) to add into (Re)Association
* Response frames or %NULL
* @assocresp_ies_len: length of assocresp_ies in octets
+ * @probe_resp_len: length of probe response template (@probe_resp)
+ * @probe_resp: probe response template (AP mode only)
*/
struct beacon_parameters {
u8 *head, *tail;
@@ -408,6 +410,8 @@ struct beacon_parameters {
size_t proberesp_ies_len;
const u8 *assocresp_ies;
size_t assocresp_ies_len;
+ int probe_resp_len;
+ u8 *probe_resp;
};
/**
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 62acdb8..4902213 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -196,6 +196,8 @@ static const struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] = {
[NL80211_ATTR_TDLS_OPERATION] = { .type = NLA_U8 },
[NL80211_ATTR_TDLS_SUPPORT] = { .type = NLA_FLAG },
[NL80211_ATTR_TDLS_EXTERNAL_SETUP] = { .type = NLA_FLAG },
+ [NL80211_ATTR_PROBE_RESP] = { .type = NLA_BINARY,
+ .len = IEEE80211_MAX_DATA_LEN },
};
/* policy for the key attributes */
@@ -2160,6 +2162,13 @@ static int nl80211_addset_beacon(struct sk_buff *skb, struct genl_info *info)
nla_len(info->attrs[NL80211_ATTR_IE_ASSOC_RESP]);
}
+ if (info->attrs[NL80211_ATTR_PROBE_RESP]) {
+ params.probe_resp =
+ nla_data(info->attrs[NL80211_ATTR_PROBE_RESP]);
+ params.probe_resp_len =
+ nla_len(info->attrs[NL80211_ATTR_PROBE_RESP]);
+ }
+
err = call(&rdev->wiphy, dev, ¶ms);
if (!err && params.interval)
wdev->beacon_interval = params.interval;
--
1.7.5.4