2011-11-15 06:04:44

by Mohammed Shafi Shajakhan

[permalink] [raw]
Subject: [RFC 05/18] ath9k_hw: Add MCI h/w code and state machine

From: Mohammed Shafi Shajakhan <[email protected]>

Signed-off-by: Mohammed Shafi Shajakhan <[email protected]>
---
drivers/net/wireless/ath/ath9k/Makefile | 3 +-
drivers/net/wireless/ath/ath9k/ar9003_mci.c | 1464 +++++++++++++++++++++++++++
drivers/net/wireless/ath/ath9k/hw.h | 26 +
3 files changed, 1492 insertions(+), 1 deletions(-)
create mode 100644 drivers/net/wireless/ath/ath9k/ar9003_mci.c

diff --git a/drivers/net/wireless/ath/ath9k/Makefile b/drivers/net/wireless/ath/ath9k/Makefile
index 49d3f25..390797d 100644
--- a/drivers/net/wireless/ath/ath9k/Makefile
+++ b/drivers/net/wireless/ath/ath9k/Makefile
@@ -34,7 +34,8 @@ ath9k_hw-y:= \
ar9002_mac.o \
ar9003_mac.o \
ar9003_eeprom.o \
- ar9003_paprd.o
+ ar9003_paprd.o \
+ ar9003_mci.o

obj-$(CONFIG_ATH9K_HW) += ath9k_hw.o

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mci.c b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
new file mode 100644
index 0000000..8599822
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
@@ -0,0 +1,1464 @@
+/*
+ * Copyright (c) 2008-2011 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/export.h>
+#include "hw.h"
+#include "ar9003_phy.h"
+#include "ar9003_mci.h"
+
+static void ar9003_mci_reset_req_wakeup(struct ath_hw *ah)
+{
+ if (!AR_SREV_9462_20(ah))
+ return;
+
+ REG_RMW_FIELD(ah, AR_MCI_COMMAND2,
+ AR_MCI_COMMAND2_RESET_REQ_WAKEUP, 1);
+ udelay(1);
+ REG_RMW_FIELD(ah, AR_MCI_COMMAND2,
+ AR_MCI_COMMAND2_RESET_REQ_WAKEUP, 0);
+}
+
+static int ar9003_mci_wait_for_interrupt(struct ath_hw *ah, u32 address,
+ u32 bit_position, int time_out)
+{
+ struct ath_common *common = ath9k_hw_common(ah);
+
+ while (time_out) {
+
+ if (REG_READ(ah, address) & bit_position) {
+
+ REG_WRITE(ah, address, bit_position);
+
+ if (address == AR_MCI_INTERRUPT_RX_MSG_RAW) {
+
+ if (bit_position &
+ AR_MCI_INTERRUPT_RX_MSG_REQ_WAKE)
+ ar9003_mci_reset_req_wakeup(ah);
+
+ if (bit_position &
+ (AR_MCI_INTERRUPT_RX_MSG_SYS_SLEEPING |
+ AR_MCI_INTERRUPT_RX_MSG_SYS_WAKING))
+ REG_WRITE(ah, AR_MCI_INTERRUPT_RAW,
+ AR_MCI_INTERRUPT_REMOTE_SLEEP_UPDATE);
+
+ REG_WRITE(ah, AR_MCI_INTERRUPT_RAW,
+ AR_MCI_INTERRUPT_RX_MSG);
+ }
+ break;
+ }
+
+ udelay(10);
+ time_out -= 10;
+
+ if (time_out < 0)
+ break;
+ }
+
+ if (time_out <= 0) {
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI Wait for Reg 0x%08x = 0x%08x timeout.\n",
+ address, bit_position);
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI INT_RAW = 0x%08x, RX_MSG_RAW = 0x%08x",
+ REG_READ(ah, AR_MCI_INTERRUPT_RAW),
+ REG_READ(ah, AR_MCI_INTERRUPT_RX_MSG_RAW));
+ time_out = 0;
+ }
+
+ return time_out;
+}
+
+void ar9003_mci_remote_reset(struct ath_hw *ah, bool wait_done)
+{
+ u32 payload[4] = { 0xffffffff, 0xffffffff, 0xffffffff, 0xffffff00};
+
+ ar9003_mci_send_message(ah, MCI_REMOTE_RESET, 0, payload, 16,
+ wait_done, false);
+ udelay(5);
+}
+
+void ar9003_mci_send_lna_transfer(struct ath_hw *ah, bool wait_done)
+{
+ u32 payload = 0x00000000;
+
+ ar9003_mci_send_message(ah, MCI_LNA_TRANS, 0, &payload, 1,
+ wait_done, false);
+}
+
+static void ar9003_mci_send_req_wake(struct ath_hw *ah, bool wait_done)
+{
+ ar9003_mci_send_message(ah, MCI_REQ_WAKE, MCI_FLAG_DISABLE_TIMESTAMP,
+ NULL, 0, wait_done, false);
+ udelay(5);
+}
+
+void ar9003_mci_send_sys_waking(struct ath_hw *ah, bool wait_done)
+{
+ ar9003_mci_send_message(ah, MCI_SYS_WAKING, MCI_FLAG_DISABLE_TIMESTAMP,
+ NULL, 0, wait_done, false);
+}
+
+static void ar9003_mci_send_lna_take(struct ath_hw *ah, bool wait_done)
+{
+ u32 payload = 0x70000000;
+
+ ar9003_mci_send_message(ah, MCI_LNA_TAKE, 0, &payload, 1,
+ wait_done, false);
+}
+
+static void ar9003_mci_send_sys_sleeping(struct ath_hw *ah, bool wait_done)
+{
+ ar9003_mci_send_message(ah, MCI_SYS_SLEEPING,
+ MCI_FLAG_DISABLE_TIMESTAMP,
+ NULL, 0, wait_done, false);
+}
+
+static void ar9003_mci_send_coex_version_query(struct ath_hw *ah,
+ bool wait_done)
+{
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
+ u32 payload[4] = {0, 0, 0, 0};
+
+ if (!mci->bt_version_known &&
+ (mci->bt_state != MCI_BT_SLEEP)) {
+ ath_dbg(common, ATH_DBG_MCI, "MCI Send Coex version query\n");
+ MCI_GPM_SET_TYPE_OPCODE(payload,
+ MCI_GPM_COEX_AGENT, MCI_GPM_COEX_VERSION_QUERY);
+ ar9003_mci_send_message(ah, MCI_GPM, 0, payload, 16,
+ wait_done, true);
+ }
+}
+
+static void ar9003_mci_send_coex_version_response(struct ath_hw *ah,
+ bool wait_done)
+{
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
+ u32 payload[4] = {0, 0, 0, 0};
+
+ ath_dbg(common, ATH_DBG_MCI, "MCI Send Coex version response\n");
+ MCI_GPM_SET_TYPE_OPCODE(payload, MCI_GPM_COEX_AGENT,
+ MCI_GPM_COEX_VERSION_RESPONSE);
+ *(((u8 *)payload) + MCI_GPM_COEX_B_MAJOR_VERSION) =
+ mci->wlan_ver_major;
+ *(((u8 *)payload) + MCI_GPM_COEX_B_MINOR_VERSION) =
+ mci->wlan_ver_minor;
+ ar9003_mci_send_message(ah, MCI_GPM, 0, payload, 16, wait_done, true);
+}
+
+static void ar9003_mci_send_coex_wlan_channels(struct ath_hw *ah,
+ bool wait_done)
+{
+ struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
+ u32 *payload = &mci->wlan_channels[0];
+
+ if ((mci->wlan_channels_update == true) &&
+ (mci->bt_state != MCI_BT_SLEEP)) {
+ MCI_GPM_SET_TYPE_OPCODE(payload,
+ MCI_GPM_COEX_AGENT, MCI_GPM_COEX_WLAN_CHANNELS);
+ ar9003_mci_send_message(ah, MCI_GPM, 0, payload, 16,
+ wait_done, true);
+ MCI_GPM_SET_TYPE_OPCODE(payload, 0xff, 0xff);
+ }
+}
+
+static void ar9003_mci_send_coex_bt_status_query(struct ath_hw *ah,
+ bool wait_done, u8 query_type)
+{
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
+ u32 payload[4] = {0, 0, 0, 0};
+ bool query_btinfo = !!(query_type & (MCI_GPM_COEX_QUERY_BT_ALL_INFO |
+ MCI_GPM_COEX_QUERY_BT_TOPOLOGY));
+
+ if (mci->bt_state != MCI_BT_SLEEP) {
+
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI Send Coex BT Status Query 0x%02X\n", query_type);
+
+ MCI_GPM_SET_TYPE_OPCODE(payload,
+ MCI_GPM_COEX_AGENT, MCI_GPM_COEX_STATUS_QUERY);
+
+ *(((u8 *)payload) + MCI_GPM_COEX_B_BT_BITMAP) = query_type;
+ /*
+ * If bt_status_query message is not sent successfully,
+ * then need_flush_btinfo should be set again.
+ */
+ if (!ar9003_mci_send_message(ah, MCI_GPM, 0, payload, 16,
+ wait_done, true)) {
+ if (query_btinfo) {
+ mci->need_flush_btinfo = true;
+
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI send bt_status_query fail, "
+ "set flush flag again\n");
+ }
+ }
+
+ if (query_btinfo)
+ mci->query_bt = false;
+ }
+}
+
+void ar9003_mci_send_coex_halt_bt_gpm(struct ath_hw *ah, bool halt,
+ bool wait_done)
+{
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
+ u32 payload[4] = {0, 0, 0, 0};
+
+ ath_dbg(common, ATH_DBG_MCI, "MCI Send Coex %s BT GPM.\n",
+ (halt) ? "halt" : "unhalt");
+
+ MCI_GPM_SET_TYPE_OPCODE(payload,
+ MCI_GPM_COEX_AGENT, MCI_GPM_COEX_HALT_BT_GPM);
+
+ if (halt) {
+ mci->query_bt = true;
+ /* Send next unhalt no matter halt sent or not */
+ mci->unhalt_bt_gpm = true;
+ mci->need_flush_btinfo = true;
+ *(((u8 *)payload) + MCI_GPM_COEX_B_HALT_STATE) =
+ MCI_GPM_COEX_BT_GPM_HALT;
+ } else
+ *(((u8 *)payload) + MCI_GPM_COEX_B_HALT_STATE) =
+ MCI_GPM_COEX_BT_GPM_UNHALT;
+
+ ar9003_mci_send_message(ah, MCI_GPM, 0, payload, 16, wait_done, true);
+}
+
+
+static void ar9003_mci_prep_interface(struct ath_hw *ah)
+{
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
+ u32 saved_mci_int_en;
+ u32 mci_timeout = 150;
+
+ mci->bt_state = MCI_BT_SLEEP;
+ saved_mci_int_en = REG_READ(ah, AR_MCI_INTERRUPT_EN);
+
+ REG_WRITE(ah, AR_MCI_INTERRUPT_EN, 0);
+ REG_WRITE(ah, AR_MCI_INTERRUPT_RX_MSG_RAW,
+ REG_READ(ah, AR_MCI_INTERRUPT_RX_MSG_RAW));
+ REG_WRITE(ah, AR_MCI_INTERRUPT_RAW,
+ REG_READ(ah, AR_MCI_INTERRUPT_RAW));
+
+ /* Remote Reset */
+ ath_dbg(common, ATH_DBG_MCI, "MCI Reset sequence start\n");
+ ath_dbg(common, ATH_DBG_MCI, "MCI send REMOTE_RESET\n");
+ ar9003_mci_remote_reset(ah, true);
+
+ /*
+ * This delay is required for the reset delay worst case value 255 in
+ * MCI_COMMAND2 register
+ */
+
+ if (AR_SREV_9462_10(ah))
+ udelay(252);
+
+ ath_dbg(common, ATH_DBG_MCI, "MCI Send REQ_WAKE to remoter(BT)\n");
+ ar9003_mci_send_req_wake(ah, true);
+
+ if (ar9003_mci_wait_for_interrupt(ah, AR_MCI_INTERRUPT_RX_MSG_RAW,
+ AR_MCI_INTERRUPT_RX_MSG_SYS_WAKING, 500)) {
+
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI SYS_WAKING from remote(BT)\n");
+ mci->bt_state = MCI_BT_AWAKE;
+
+ if (AR_SREV_9462_10(ah))
+ udelay(10);
+ /*
+ * we don't need to send more remote_reset at this moment.
+ * If BT receive first remote_reset, then BT HW will
+ * be cleaned up and will be able to receive req_wake
+ * and BT HW will respond sys_waking.
+ * In this case, WLAN will receive BT's HW sys_waking.
+ * Otherwise, if BT SW missed initial remote_reset,
+ * that remote_reset will still clean up BT MCI RX,
+ * and the req_wake will wake BT up,
+ * and BT SW will respond this req_wake with a remote_reset and
+ * sys_waking. In this case, WLAN will receive BT's SW
+ * sys_waking. In either case, BT's RX is cleaned up. So we
+ * don't need to reply BT's remote_reset now, if any.
+ * Similarly, if in any case, WLAN can receive BT's sys_waking,
+ * that means WLAN's RX is also fine.
+ */
+
+ /* Send SYS_WAKING to BT */
+
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI send SW SYS_WAKING to remote BT\n");
+
+ ar9003_mci_send_sys_waking(ah, true);
+ udelay(10);
+
+ /*
+ * Set BT priority interrupt value to be 0xff to
+ * avoid having too many BT PRIORITY interrupts.
+ */
+
+ REG_WRITE(ah, AR_MCI_BT_PRI0, 0xFFFFFFFF);
+ REG_WRITE(ah, AR_MCI_BT_PRI1, 0xFFFFFFFF);
+ REG_WRITE(ah, AR_MCI_BT_PRI2, 0xFFFFFFFF);
+ REG_WRITE(ah, AR_MCI_BT_PRI3, 0xFFFFFFFF);
+ REG_WRITE(ah, AR_MCI_BT_PRI, 0X000000FF);
+
+ /*
+ * A contention reset will be received after send out
+ * sys_waking. Also BT priority interrupt bits will be set.
+ * Clear those bits before the next step.
+ */
+
+ REG_WRITE(ah, AR_MCI_INTERRUPT_RX_MSG_RAW,
+ AR_MCI_INTERRUPT_RX_MSG_CONT_RST);
+ REG_WRITE(ah, AR_MCI_INTERRUPT_RAW,
+ AR_MCI_INTERRUPT_BT_PRI);
+
+ if (AR_SREV_9462_10(ah) || mci->is_2g) {
+ /* Send LNA_TRANS */
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI send LNA_TRANS to BT\n");
+ ar9003_mci_send_lna_transfer(ah, true);
+ udelay(5);
+ }
+
+ if (AR_SREV_9462_10(ah) || (mci->is_2g &&
+ !mci->update_2g5g)) {
+ if (ar9003_mci_wait_for_interrupt(ah,
+ AR_MCI_INTERRUPT_RX_MSG_RAW,
+ AR_MCI_INTERRUPT_RX_MSG_LNA_INFO,
+ mci_timeout))
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI WLAN has control over the LNA & "
+ "BT obeys it\n");
+ else
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI BT didn't respond to"
+ "LNA_TRANS\n");
+ }
+
+ if (AR_SREV_9462_10(ah)) {
+ /* Send another remote_reset to deassert BT clk_req. */
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI another remote_reset to "
+ "deassert clk_req\n");
+ ar9003_mci_remote_reset(ah, true);
+ udelay(252);
+ }
+ }
+
+ /* Clear the extra redundant SYS_WAKING from BT */
+ if ((mci->bt_state == MCI_BT_AWAKE) &&
+ (REG_READ_FIELD(ah, AR_MCI_INTERRUPT_RX_MSG_RAW,
+ AR_MCI_INTERRUPT_RX_MSG_SYS_WAKING)) &&
+ (REG_READ_FIELD(ah, AR_MCI_INTERRUPT_RX_MSG_RAW,
+ AR_MCI_INTERRUPT_RX_MSG_SYS_SLEEPING) == 0)) {
+
+ REG_WRITE(ah, AR_MCI_INTERRUPT_RX_MSG_RAW,
+ AR_MCI_INTERRUPT_RX_MSG_SYS_WAKING);
+ REG_WRITE(ah, AR_MCI_INTERRUPT_RAW,
+ AR_MCI_INTERRUPT_REMOTE_SLEEP_UPDATE);
+ }
+
+ REG_WRITE(ah, AR_MCI_INTERRUPT_EN, saved_mci_int_en);
+}
+
+void ar9003_mci_disable_interrupt(struct ath_hw *ah)
+{
+ REG_WRITE(ah, AR_MCI_INTERRUPT_EN, 0);
+ REG_WRITE(ah, AR_MCI_INTERRUPT_RX_MSG_EN, 0);
+}
+
+void ar9003_mci_enable_interrupt(struct ath_hw *ah)
+{
+
+ REG_WRITE(ah, AR_MCI_INTERRUPT_EN, AR_MCI_INTERRUPT_DEFAULT);
+ REG_WRITE(ah, AR_MCI_INTERRUPT_RX_MSG_EN,
+ AR_MCI_INTERRUPT_RX_MSG_DEFAULT);
+}
+
+bool ar9003_mci_check_int(struct ath_hw *ah, u32 ints)
+{
+ u32 intr;
+
+ intr = REG_READ(ah, AR_MCI_INTERRUPT_RX_MSG_RAW);
+ return ((intr & ints) == ints);
+}
+
+void ar9003_mci_get_interrupt(struct ath_hw *ah, u32 *raw_intr,
+ u32 *rx_msg_intr)
+{
+ struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
+ *raw_intr = mci->raw_intr;
+ *rx_msg_intr = mci->rx_msg_intr;
+
+ /* Clean int bits after the values are read. */
+ mci->raw_intr = 0;
+ mci->rx_msg_intr = 0;
+}
+EXPORT_SYMBOL(ar9003_mci_get_interrupt);
+
+void ar9003_mci_2g5g_changed(struct ath_hw *ah, bool is_2g)
+{
+ struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
+
+ if (!mci->update_2g5g &&
+ (mci->is_2g != is_2g))
+ mci->update_2g5g = true;
+
+ mci->is_2g = is_2g;
+}
+
+static bool ar9003_mci_is_gpm_valid(struct ath_hw *ah, u32 msg_index)
+{
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
+ u32 *payload;
+ u32 recv_type, offset;
+
+ if (msg_index == MCI_GPM_INVALID)
+ return false;
+
+ offset = msg_index << 4;
+
+ payload = (u32 *)(mci->gpm_buf + offset);
+ recv_type = MCI_GPM_TYPE(payload);
+
+ if (recv_type == MCI_GPM_RSVD_PATTERN) {
+ ath_dbg(common, ATH_DBG_MCI, "MCI Skip RSVD GPM\n");
+ return false;
+ }
+
+ return true;
+}
+
+static void ar9003_mci_observation_set_up(struct ath_hw *ah)
+{
+ struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
+ if (mci->config & ATH_MCI_CONFIG_MCI_OBS_MCI) {
+
+ ath9k_hw_cfg_output(ah, 3,
+ AR_GPIO_OUTPUT_MUX_AS_MCI_WLAN_DATA);
+ ath9k_hw_cfg_output(ah, 2, AR_GPIO_OUTPUT_MUX_AS_MCI_WLAN_CLK);
+ ath9k_hw_cfg_output(ah, 1, AR_GPIO_OUTPUT_MUX_AS_MCI_BT_DATA);
+ ath9k_hw_cfg_output(ah, 0, AR_GPIO_OUTPUT_MUX_AS_MCI_BT_CLK);
+
+ } else if (mci->config & ATH_MCI_CONFIG_MCI_OBS_TXRX) {
+
+ ath9k_hw_cfg_output(ah, 3, AR_GPIO_OUTPUT_MUX_AS_WL_IN_TX);
+ ath9k_hw_cfg_output(ah, 2, AR_GPIO_OUTPUT_MUX_AS_WL_IN_RX);
+ ath9k_hw_cfg_output(ah, 1, AR_GPIO_OUTPUT_MUX_AS_BT_IN_TX);
+ ath9k_hw_cfg_output(ah, 0, AR_GPIO_OUTPUT_MUX_AS_BT_IN_RX);
+ ath9k_hw_cfg_output(ah, 5, AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
+
+ } else if (mci->config & ATH_MCI_CONFIG_MCI_OBS_BT) {
+
+ ath9k_hw_cfg_output(ah, 3, AR_GPIO_OUTPUT_MUX_AS_BT_IN_TX);
+ ath9k_hw_cfg_output(ah, 2, AR_GPIO_OUTPUT_MUX_AS_BT_IN_RX);
+ ath9k_hw_cfg_output(ah, 1, AR_GPIO_OUTPUT_MUX_AS_MCI_BT_DATA);
+ ath9k_hw_cfg_output(ah, 0, AR_GPIO_OUTPUT_MUX_AS_MCI_BT_CLK);
+
+ } else
+ return;
+
+ REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL, AR_GPIO_JTAG_DISABLE);
+
+ if (AR_SREV_9462_20_OR_LATER(ah)) {
+ REG_RMW_FIELD(ah, AR_PHY_GLB_CONTROL,
+ AR_GLB_DS_JTAG_DISABLE, 1);
+ REG_RMW_FIELD(ah, AR_PHY_GLB_CONTROL,
+ AR_GLB_WLAN_UART_INTF_EN, 0);
+ REG_SET_BIT(ah, AR_GLB_GPIO_CONTROL,
+ ATH_MCI_CONFIG_MCI_OBS_GPIO);
+ }
+
+ REG_RMW_FIELD(ah, AR_BTCOEX_CTRL2, AR_BTCOEX_CTRL2_GPIO_OBS_SEL, 0);
+ REG_RMW_FIELD(ah, AR_BTCOEX_CTRL2, AR_BTCOEX_CTRL2_MAC_BB_OBS_SEL, 1);
+ REG_WRITE(ah, AR_OBS, 0x4b);
+ REG_RMW_FIELD(ah, AR_DIAG_SW, AR_DIAG_OBS_PT_SEL1, 0x03);
+ REG_RMW_FIELD(ah, AR_DIAG_SW, AR_DIAG_OBS_PT_SEL2, 0x01);
+ REG_RMW_FIELD(ah, AR_MACMISC, AR_MACMISC_MISC_OBS_BUS_LSB, 0x02);
+ REG_RMW_FIELD(ah, AR_MACMISC, AR_MACMISC_MISC_OBS_BUS_MSB, 0x03);
+ REG_RMW_FIELD(ah, AR_PHY_TEST_CTL_STATUS,
+ AR_PHY_TEST_CTL_DEBUGPORT_SEL, 0x07);
+}
+
+static bool ar9003_mci_send_coex_bt_flags(struct ath_hw *ah, bool wait_done,
+ u8 opcode, u32 bt_flags)
+{
+ struct ath_common *common = ath9k_hw_common(ah);
+ u32 pld[4] = {0, 0, 0, 0};
+
+ MCI_GPM_SET_TYPE_OPCODE(pld,
+ MCI_GPM_COEX_AGENT, MCI_GPM_COEX_BT_UPDATE_FLAGS);
+
+ *(((u8 *)pld) + MCI_GPM_COEX_B_BT_FLAGS_OP) = opcode;
+ *(((u8 *)pld) + MCI_GPM_COEX_W_BT_FLAGS + 0) = bt_flags & 0xFF;
+ *(((u8 *)pld) + MCI_GPM_COEX_W_BT_FLAGS + 1) = (bt_flags >> 8) & 0xFF;
+ *(((u8 *)pld) + MCI_GPM_COEX_W_BT_FLAGS + 2) = (bt_flags >> 16) & 0xFF;
+ *(((u8 *)pld) + MCI_GPM_COEX_W_BT_FLAGS + 3) = (bt_flags >> 24) & 0xFF;
+
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI BT_MCI_FLAGS: Send Coex BT Update Flags %s 0x%08x\n",
+ (opcode == MCI_GPM_COEX_BT_FLAGS_READ) ? "READ" :
+ ((opcode == MCI_GPM_COEX_BT_FLAGS_SET) ? "SET" : "CLEAR"),
+ bt_flags);
+
+ return ar9003_mci_send_message(ah, MCI_GPM, 0, pld, 16,
+ wait_done, true);
+}
+
+void ar9003_mci_reset(struct ath_hw *ah, bool en_int, bool is_2g,
+ bool is_full_sleep)
+{
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
+ u32 regval, thresh;
+
+ ath_dbg(common, ATH_DBG_MCI, "MCI full_sleep = %d, is_2g = %d\n",
+ is_full_sleep, is_2g);
+
+ /*
+ * GPM buffer and scheduling message buffer are not allocated
+ */
+
+ if (!mci->gpm_addr && !mci->sched_addr) {
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI GPM and schedule buffers are not allocated");
+ return;
+ }
+
+ if (REG_READ(ah, AR_BTCOEX_CTRL) == 0xdeadbeef) {
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI it's deadbeef, quit mci_reset\n");
+ return;
+ }
+
+ /* Program MCI DMA related registers */
+ REG_WRITE(ah, AR_MCI_GPM_0, mci->gpm_addr);
+ REG_WRITE(ah, AR_MCI_GPM_1, mci->gpm_len);
+ REG_WRITE(ah, AR_MCI_SCHD_TABLE_0, mci->sched_addr);
+
+ /*
+ * To avoid MCI state machine be affected by incoming remote MCI msgs,
+ * MCI mode will be enabled later, right before reset the MCI TX and RX.
+ */
+
+ regval = SM(1, AR_BTCOEX_CTRL_AR9462_MODE) |
+ SM(1, AR_BTCOEX_CTRL_WBTIMER_EN) |
+ SM(1, AR_BTCOEX_CTRL_PA_SHARED) |
+ SM(1, AR_BTCOEX_CTRL_LNA_SHARED) |
+ SM(2, AR_BTCOEX_CTRL_NUM_ANTENNAS) |
+ SM(3, AR_BTCOEX_CTRL_RX_CHAIN_MASK) |
+ SM(0, AR_BTCOEX_CTRL_1_CHAIN_ACK) |
+ SM(0, AR_BTCOEX_CTRL_1_CHAIN_BCN) |
+ SM(0, AR_BTCOEX_CTRL_ONE_STEP_LOOK_AHEAD_EN);
+
+ if (is_2g && (AR_SREV_9462_20(ah)) &&
+ !(mci->config & ATH_MCI_CONFIG_DISABLE_OSLA)) {
+
+ regval |= SM(1, AR_BTCOEX_CTRL_ONE_STEP_LOOK_AHEAD_EN);
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI sched one step look ahead\n");
+
+ if (!(mci->config &
+ ATH_MCI_CONFIG_DISABLE_AGGR_THRESH)) {
+
+ thresh = MS(mci->config,
+ ATH_MCI_CONFIG_AGGR_THRESH);
+ thresh &= 7;
+ regval |= SM(1,
+ AR_BTCOEX_CTRL_TIME_TO_NEXT_BT_THRESH_EN);
+ regval |= SM(thresh, AR_BTCOEX_CTRL_AGGR_THRESH);
+
+ REG_RMW_FIELD(ah, AR_MCI_SCHD_TABLE_2,
+ AR_MCI_SCHD_TABLE_2_HW_BASED, 1);
+ REG_RMW_FIELD(ah, AR_MCI_SCHD_TABLE_2,
+ AR_MCI_SCHD_TABLE_2_MEM_BASED, 1);
+
+ } else
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI sched aggr thresh: off\n");
+ } else
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI SCHED one step look ahead off\n");
+
+ if (AR_SREV_9462_10(ah))
+ regval |= SM(1, AR_BTCOEX_CTRL_SPDT_ENABLE_10);
+
+ REG_WRITE(ah, AR_BTCOEX_CTRL, regval);
+
+ if (AR_SREV_9462_20(ah)) {
+ REG_SET_BIT(ah, AR_PHY_GLB_CONTROL,
+ AR_BTCOEX_CTRL_SPDT_ENABLE);
+ REG_RMW_FIELD(ah, AR_BTCOEX_CTRL3,
+ AR_BTCOEX_CTRL3_CONT_INFO_TIMEOUT, 20);
+ }
+
+ REG_RMW_FIELD(ah, AR_BTCOEX_CTRL2, AR_BTCOEX_CTRL2_RX_DEWEIGHT, 1);
+ REG_RMW_FIELD(ah, AR_PCU_MISC, AR_PCU_BT_ANT_PREVENT_RX, 0);
+
+ thresh = MS(mci->config, ATH_MCI_CONFIG_CLK_DIV);
+ REG_RMW_FIELD(ah, AR_MCI_TX_CTRL, AR_MCI_TX_CTRL_CLK_DIV, thresh);
+ REG_SET_BIT(ah, AR_BTCOEX_CTRL, AR_BTCOEX_CTRL_MCI_MODE_EN);
+
+ /* Resetting the Rx and Tx paths of MCI */
+ regval = REG_READ(ah, AR_MCI_COMMAND2);
+ regval |= SM(1, AR_MCI_COMMAND2_RESET_TX);
+ REG_WRITE(ah, AR_MCI_COMMAND2, regval);
+
+ udelay(1);
+
+ regval &= ~SM(1, AR_MCI_COMMAND2_RESET_TX);
+ REG_WRITE(ah, AR_MCI_COMMAND2, regval);
+
+ if (is_full_sleep) {
+ ar9003_mci_mute_bt(ah);
+ udelay(100);
+ }
+
+ regval |= SM(1, AR_MCI_COMMAND2_RESET_RX);
+ REG_WRITE(ah, AR_MCI_COMMAND2, regval);
+ udelay(1);
+ regval &= ~SM(1, AR_MCI_COMMAND2_RESET_RX);
+ REG_WRITE(ah, AR_MCI_COMMAND2, regval);
+
+ ar9003_mci_state(ah, MCI_STATE_INIT_GPM_OFFSET, NULL);
+ REG_WRITE(ah, AR_MCI_MSG_ATTRIBUTES_TABLE,
+ (SM(0xe801, AR_MCI_MSG_ATTRIBUTES_TABLE_INVALID_HDR) |
+ SM(0x0000, AR_MCI_MSG_ATTRIBUTES_TABLE_CHECKSUM)));
+
+ REG_CLR_BIT(ah, AR_MCI_TX_CTRL,
+ AR_MCI_TX_CTRL_DISABLE_LNA_UPDATE);
+
+ if (AR_SREV_9462_20_OR_LATER(ah))
+ ar9003_mci_observation_set_up(ah);
+
+ mci->ready = true;
+ ar9003_mci_prep_interface(ah);
+
+ if (en_int)
+ ar9003_mci_enable_interrupt(ah);
+}
+
+void ar9003_mci_mute_bt(struct ath_hw *ah)
+{
+ struct ath_common *common = ath9k_hw_common(ah);
+
+ /* disable all MCI messages */
+ REG_WRITE(ah, AR_MCI_MSG_ATTRIBUTES_TABLE, 0xffff0000);
+ REG_WRITE(ah, AR_BTCOEX_WL_WEIGHTS0, 0xffffffff);
+ REG_WRITE(ah, AR_BTCOEX_WL_WEIGHTS1, 0xffffffff);
+ REG_WRITE(ah, AR_BTCOEX_WL_WEIGHTS2, 0xffffffff);
+ REG_WRITE(ah, AR_BTCOEX_WL_WEIGHTS3, 0xffffffff);
+ REG_SET_BIT(ah, AR_MCI_TX_CTRL, AR_MCI_TX_CTRL_DISABLE_LNA_UPDATE);
+
+ /* wait pending HW messages to flush out */
+ udelay(10);
+
+ /*
+ * Send LNA_TAKE and SYS_SLEEPING when
+ * 1. reset not after resuming from full sleep
+ * 2. before reset MCI RX, to quiet BT and avoid MCI RX misalignment
+ */
+
+ ath_dbg(common, ATH_DBG_MCI, "MCI Send LNA take\n");
+ ar9003_mci_send_lna_take(ah, true);
+
+ udelay(5);
+
+ ath_dbg(common, ATH_DBG_MCI, "MCI Send sys sleeping\n");
+ ar9003_mci_send_sys_sleeping(ah, true);
+}
+
+void ar9003_mci_sync_bt_state(struct ath_hw *ah)
+{
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
+ u32 cur_bt_state;
+
+ cur_bt_state = ar9003_mci_state(ah, MCI_STATE_REMOTE_SLEEP, NULL);
+
+ if (mci->bt_state != cur_bt_state) {
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI BT state mismatches. old: %d, new: %d\n",
+ mci->bt_state, cur_bt_state);
+ mci->bt_state = cur_bt_state;
+ }
+
+ if (mci->bt_state != MCI_BT_SLEEP) {
+
+ ar9003_mci_send_coex_version_query(ah, true);
+ ar9003_mci_send_coex_wlan_channels(ah, true);
+
+ if (mci->unhalt_bt_gpm == true) {
+ ath_dbg(common, ATH_DBG_MCI, "MCI unhalt BT GPM");
+ ar9003_mci_send_coex_halt_bt_gpm(ah, false, true);
+ }
+ }
+}
+
+static void ar9003_mci_send_2g5g_status(struct ath_hw *ah, bool wait_done)
+{
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
+ u32 new_flags, to_set, to_clear;
+
+ if (AR_SREV_9462_20(ah) &&
+ mci->update_2g5g &&
+ (mci->bt_state != MCI_BT_SLEEP)) {
+
+ if (mci->is_2g) {
+ new_flags = MCI_2G_FLAGS;
+ to_clear = MCI_2G_FLAGS_CLEAR_MASK;
+ to_set = MCI_2G_FLAGS_SET_MASK;
+ } else {
+ new_flags = MCI_5G_FLAGS;
+ to_clear = MCI_5G_FLAGS_CLEAR_MASK;
+ to_set = MCI_5G_FLAGS_SET_MASK;
+ }
+
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI BT_MCI_FLAGS: %s 0x%08x clr=0x%08x, set=0x%08x\n",
+ mci->is_2g ? "2G" : "5G", new_flags, to_clear, to_set);
+
+ if (to_clear)
+ ar9003_mci_send_coex_bt_flags(ah, wait_done,
+ MCI_GPM_COEX_BT_FLAGS_CLEAR, to_clear);
+
+ if (to_set)
+ ar9003_mci_send_coex_bt_flags(ah, wait_done,
+ MCI_GPM_COEX_BT_FLAGS_SET, to_set);
+ }
+
+ if (AR_SREV_9462_10(ah) && (mci->bt_state != MCI_BT_SLEEP))
+ mci->update_2g5g = false;
+}
+
+static void ar9003_mci_queue_unsent_gpm(struct ath_hw *ah, u8 header,
+ u32 *payload, bool queue)
+{
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
+ u8 type, opcode;
+
+ if (queue) {
+
+ if (payload)
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI ERROR: Send fail: %02x: %02x %02x %02x\n",
+ header,
+ *(((u8 *)payload) + 4),
+ *(((u8 *)payload) + 5),
+ *(((u8 *)payload) + 6));
+ else
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI ERROR: Send fail: %02x\n", header);
+ }
+
+ /* check if the message is to be queued */
+ if (header != MCI_GPM)
+ return;
+
+ type = MCI_GPM_TYPE(payload);
+ opcode = MCI_GPM_OPCODE(payload);
+
+ if (type != MCI_GPM_COEX_AGENT)
+ return;
+
+ switch (opcode) {
+ case MCI_GPM_COEX_BT_UPDATE_FLAGS:
+
+ if (AR_SREV_9462_10(ah))
+ break;
+
+ if (*(((u8 *)payload) + MCI_GPM_COEX_B_BT_FLAGS_OP) ==
+ MCI_GPM_COEX_BT_FLAGS_READ)
+ break;
+
+ mci->update_2g5g = queue;
+
+ if (queue)
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI BT_MCI_FLAGS: 2G5G status <queued> %s.\n",
+ mci->is_2g ? "2G" : "5G");
+ else
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI BT_MCI_FLAGS: 2G5G status <sent> %s.\n",
+ mci->is_2g ? "2G" : "5G");
+
+ break;
+
+ case MCI_GPM_COEX_WLAN_CHANNELS:
+
+ mci->wlan_channels_update = queue;
+ if (queue)
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI WLAN channel map <queued>\n");
+ else
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI WLAN channel map <sent>\n");
+ break;
+
+ case MCI_GPM_COEX_HALT_BT_GPM:
+
+ if (*(((u8 *)payload) + MCI_GPM_COEX_B_HALT_STATE) ==
+ MCI_GPM_COEX_BT_GPM_UNHALT) {
+
+ mci->unhalt_bt_gpm = queue;
+
+ if (queue)
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI UNHALT BT GPM <queued>\n");
+ else {
+ mci->halted_bt_gpm = false;
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI UNHALT BT GPM <sent>\n");
+ }
+ }
+
+ if (*(((u8 *)payload) + MCI_GPM_COEX_B_HALT_STATE) ==
+ MCI_GPM_COEX_BT_GPM_HALT) {
+
+ mci->halted_bt_gpm = !queue;
+
+ if (queue)
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI HALT BT GPM <not sent>\n");
+ else
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI UNHALT BT GPM <sent>\n");
+ }
+
+ break;
+ default:
+ break;
+ }
+}
+
+void ar9003_mci_2g5g_switch(struct ath_hw *ah, bool wait_done)
+{
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
+
+ if (mci->update_2g5g) {
+ if (mci->is_2g) {
+
+ ar9003_mci_send_2g5g_status(ah, true);
+ ath_dbg(common, ATH_DBG_MCI, "MCI Send LNA trans\n");
+ ar9003_mci_send_lna_transfer(ah, true);
+ udelay(5);
+
+ REG_CLR_BIT(ah, AR_MCI_TX_CTRL,
+ AR_MCI_TX_CTRL_DISABLE_LNA_UPDATE);
+
+ if (AR_SREV_9462_20(ah)) {
+ REG_CLR_BIT(ah, AR_PHY_GLB_CONTROL,
+ AR_BTCOEX_CTRL_BT_OWN_SPDT_CTRL);
+ if (!(mci->config &
+ ATH_MCI_CONFIG_DISABLE_OSLA)) {
+ REG_SET_BIT(ah, AR_BTCOEX_CTRL,
+ AR_BTCOEX_CTRL_ONE_STEP_LOOK_AHEAD_EN);
+ }
+ }
+ } else {
+ ath_dbg(common, ATH_DBG_MCI, "MCI Send LNA take\n");
+ ar9003_mci_send_lna_take(ah, true);
+ udelay(5);
+
+ REG_SET_BIT(ah, AR_MCI_TX_CTRL,
+ AR_MCI_TX_CTRL_DISABLE_LNA_UPDATE);
+
+ if (AR_SREV_9462_20(ah)) {
+ REG_SET_BIT(ah, AR_PHY_GLB_CONTROL,
+ AR_BTCOEX_CTRL_BT_OWN_SPDT_CTRL);
+ REG_CLR_BIT(ah, AR_BTCOEX_CTRL,
+ AR_BTCOEX_CTRL_ONE_STEP_LOOK_AHEAD_EN);
+ }
+
+ ar9003_mci_send_2g5g_status(ah, true);
+ }
+ }
+}
+
+bool ar9003_mci_send_message(struct ath_hw *ah, u8 header, u32 flag,
+ u32 *payload, u8 len, bool wait_done,
+ bool check_bt)
+{
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
+ bool msg_sent = false;
+ u32 regval;
+ u32 saved_mci_int_en;
+ int i;
+
+ saved_mci_int_en = REG_READ(ah, AR_MCI_INTERRUPT_EN);
+ regval = REG_READ(ah, AR_BTCOEX_CTRL);
+
+ if ((regval == 0xdeadbeef) || !(regval & AR_BTCOEX_CTRL_MCI_MODE_EN)) {
+
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI Not sending 0x%x. MCI is not enabled. "
+ "full_sleep = %d\n", header,
+ (ah->power_mode == ATH9K_PM_FULL_SLEEP) ? 1 : 0);
+
+ ar9003_mci_queue_unsent_gpm(ah, header, payload, true);
+ return false;
+
+ } else if (check_bt && (mci->bt_state == MCI_BT_SLEEP)) {
+
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI Don't send message 0x%x. BT is in sleep state\n", header);
+
+ ar9003_mci_queue_unsent_gpm(ah, header, payload, true);
+ return false;
+ }
+
+ if (wait_done)
+ REG_WRITE(ah, AR_MCI_INTERRUPT_EN, 0);
+
+ /* Need to clear SW_MSG_DONE raw bit before wait */
+
+ REG_WRITE(ah, AR_MCI_INTERRUPT_RAW,
+ (AR_MCI_INTERRUPT_SW_MSG_DONE |
+ AR_MCI_INTERRUPT_MSG_FAIL_MASK));
+
+ if (payload) {
+ for (i = 0; (i * 4) < len; i++)
+ REG_WRITE(ah, (AR_MCI_TX_PAYLOAD0 + i * 4),
+ *(payload + i));
+ }
+
+ REG_WRITE(ah, AR_MCI_COMMAND0,
+ (SM((flag & MCI_FLAG_DISABLE_TIMESTAMP),
+ AR_MCI_COMMAND0_DISABLE_TIMESTAMP) |
+ SM(len, AR_MCI_COMMAND0_LEN) |
+ SM(header, AR_MCI_COMMAND0_HEADER)));
+
+ if (wait_done &&
+ !(ar9003_mci_wait_for_interrupt(ah, AR_MCI_INTERRUPT_RAW,
+ AR_MCI_INTERRUPT_SW_MSG_DONE, 500)))
+ ar9003_mci_queue_unsent_gpm(ah, header, payload, true);
+ else {
+ ar9003_mci_queue_unsent_gpm(ah, header, payload, false);
+ msg_sent = true;
+ }
+
+ if (wait_done)
+ REG_WRITE(ah, AR_MCI_INTERRUPT_EN, saved_mci_int_en);
+
+ return msg_sent;
+}
+EXPORT_SYMBOL(ar9003_mci_send_message);
+
+void ar9003_mci_setup(struct ath_hw *ah, u32 gpm_addr, void *gpm_buf,
+ u16 len, u32 sched_addr)
+{
+ struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
+ void *sched_buf = (void *)((char *) gpm_buf + (sched_addr - gpm_addr));
+
+ mci->gpm_addr = gpm_addr;
+ mci->gpm_buf = gpm_buf;
+ mci->gpm_len = len;
+ mci->sched_addr = sched_addr;
+ mci->sched_buf = sched_buf;
+
+ ar9003_mci_reset(ah, true, true, true);
+}
+EXPORT_SYMBOL(ar9003_mci_setup);
+
+void ar9003_mci_cleanup(struct ath_hw *ah)
+{
+ struct ath_common *common = ath9k_hw_common(ah);
+
+ /* Turn off MCI and Jupiter mode. */
+ REG_WRITE(ah, AR_BTCOEX_CTRL, 0x00);
+ ath_dbg(common, ATH_DBG_MCI, "MCI ar9003_mci_cleanup\n");
+ ar9003_mci_disable_interrupt(ah);
+}
+EXPORT_SYMBOL(ar9003_mci_cleanup);
+
+static void ar9003_mci_process_gpm_extra(struct ath_hw *ah, u8 gpm_type,
+ u8 gpm_opcode, u32 *p_gpm)
+{
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
+ u8 *p_data = (u8 *) p_gpm;
+
+ if (gpm_type != MCI_GPM_COEX_AGENT)
+ return;
+
+ switch (gpm_opcode) {
+ case MCI_GPM_COEX_VERSION_QUERY:
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI Recv GPM COEX Version Query\n");
+ ar9003_mci_send_coex_version_response(ah, true);
+ break;
+ case MCI_GPM_COEX_VERSION_RESPONSE:
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI Recv GPM COEX Version Response\n");
+ mci->bt_ver_major =
+ *(p_data + MCI_GPM_COEX_B_MAJOR_VERSION);
+ mci->bt_ver_minor =
+ *(p_data + MCI_GPM_COEX_B_MINOR_VERSION);
+ mci->bt_version_known = true;
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI BT Coex version: %d.%d\n",
+ mci->bt_ver_major,
+ mci->bt_ver_minor);
+ break;
+ case MCI_GPM_COEX_STATUS_QUERY:
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI Recv GPM COEX Status Query = 0x%02X.\n",
+ *(p_data + MCI_GPM_COEX_B_WLAN_BITMAP));
+ mci->wlan_channels_update = true;
+ ar9003_mci_send_coex_wlan_channels(ah, true);
+ break;
+ case MCI_GPM_COEX_BT_PROFILE_INFO:
+ mci->query_bt = true;
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI Recv GPM COEX BT_Profile_Info\n");
+ break;
+ case MCI_GPM_COEX_BT_STATUS_UPDATE:
+ mci->query_bt = true;
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI Recv GPM COEX BT_Status_Update "
+ "SEQ=%d (drop&query)\n", *(p_gpm + 3));
+ break;
+ default:
+ break;
+ }
+}
+
+u32 ar9003_mci_wait_for_gpm(struct ath_hw *ah, u8 gpm_type,
+ u8 gpm_opcode, int time_out)
+{
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
+ u32 *p_gpm = NULL, mismatch = 0, more_data;
+ u32 offset;
+ u8 recv_type = 0, recv_opcode = 0;
+ bool b_is_bt_cal_done = (gpm_type == MCI_GPM_BT_CAL_DONE);
+
+ more_data = time_out ? MCI_GPM_NOMORE : MCI_GPM_MORE;
+
+ while (time_out > 0) {
+ if (p_gpm) {
+ MCI_GPM_RECYCLE(p_gpm);
+ p_gpm = NULL;
+ }
+
+ if (more_data != MCI_GPM_MORE)
+ time_out = ar9003_mci_wait_for_interrupt(ah,
+ AR_MCI_INTERRUPT_RX_MSG_RAW,
+ AR_MCI_INTERRUPT_RX_MSG_GPM,
+ time_out);
+
+ if (!time_out)
+ break;
+
+ offset = ar9003_mci_state(ah,
+ MCI_STATE_NEXT_GPM_OFFSET, &more_data);
+
+ if (offset == MCI_GPM_INVALID)
+ continue;
+
+ p_gpm = (u32 *) (mci->gpm_buf + offset);
+ recv_type = MCI_GPM_TYPE(p_gpm);
+ recv_opcode = MCI_GPM_OPCODE(p_gpm);
+
+ if (MCI_GPM_IS_CAL_TYPE(recv_type)) {
+
+ if (recv_type == gpm_type) {
+
+ if ((gpm_type == MCI_GPM_BT_CAL_DONE) &&
+ !b_is_bt_cal_done) {
+ gpm_type = MCI_GPM_BT_CAL_GRANT;
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI Recv BT_CAL_DONE"
+ "wait BT_CAL_GRANT\n");
+ continue;
+ }
+
+ break;
+ }
+ } else if ((recv_type == gpm_type) &&
+ (recv_opcode == gpm_opcode))
+ break;
+
+ /* not expected message */
+
+ /*
+ * check if it's cal_grant
+ *
+ * When we're waiting for cal_grant in reset routine,
+ * it's possible that BT sends out cal_request at the
+ * same time. Since BT's calibration doesn't happen
+ * that often, we'll let BT completes calibration then
+ * we continue to wait for cal_grant from BT.
+ * Orginal: Wait BT_CAL_GRANT.
+ * New: Receive BT_CAL_REQ -> send WLAN_CAL_GRANT->wait
+ * BT_CAL_DONE -> Wait BT_CAL_GRANT.
+ */
+
+ if ((gpm_type == MCI_GPM_BT_CAL_GRANT) &&
+ (recv_type == MCI_GPM_BT_CAL_REQ)) {
+
+ u32 payload[4] = {0, 0, 0, 0};
+
+ gpm_type = MCI_GPM_BT_CAL_DONE;
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI Rcv BT_CAL_REQ, send WLAN_CAL_GRANT\n");
+
+ MCI_GPM_SET_CAL_TYPE(payload,
+ MCI_GPM_WLAN_CAL_GRANT);
+
+ ar9003_mci_send_message(ah, MCI_GPM, 0, payload, 16,
+ false, false);
+
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI now wait for BT_CAL_DONE\n");
+
+ continue;
+ } else {
+ ath_dbg(common, ATH_DBG_MCI, "MCI GPM subtype"
+ "not match 0x%x\n", *(p_gpm + 1));
+ mismatch++;
+ ar9003_mci_process_gpm_extra(ah, recv_type,
+ recv_opcode, p_gpm);
+ }
+ }
+ if (p_gpm) {
+ MCI_GPM_RECYCLE(p_gpm);
+ p_gpm = NULL;
+ }
+
+ if (time_out <= 0) {
+ time_out = 0;
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI GPM received timeout, mismatch = %d\n", mismatch);
+ } else
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI Receive GPM type=0x%x, code=0x%x\n",
+ gpm_type, gpm_opcode);
+
+ while (more_data == MCI_GPM_MORE) {
+
+ ath_dbg(common, ATH_DBG_MCI, "MCI discard remaining GPM\n");
+ offset = ar9003_mci_state(ah, MCI_STATE_NEXT_GPM_OFFSET,
+ &more_data);
+
+ if (offset == MCI_GPM_INVALID)
+ break;
+
+ p_gpm = (u32 *) (mci->gpm_buf + offset);
+ recv_type = MCI_GPM_TYPE(p_gpm);
+ recv_opcode = MCI_GPM_OPCODE(p_gpm);
+
+ if (!MCI_GPM_IS_CAL_TYPE(recv_type))
+ ar9003_mci_process_gpm_extra(ah, recv_type,
+ recv_opcode, p_gpm);
+
+ MCI_GPM_RECYCLE(p_gpm);
+ }
+
+ return time_out;
+}
+
+u32 ar9003_mci_state(struct ath_hw *ah, u32 state_type, u32 *p_data)
+{
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
+ u32 value = 0, more_gpm = 0, gpm_ptr;
+ u8 query_type;
+
+ switch (state_type) {
+ case MCI_STATE_ENABLE:
+ if (mci->ready) {
+
+ value = REG_READ(ah, AR_BTCOEX_CTRL);
+
+ if ((value == 0xdeadbeef) || (value == 0xffffffff))
+ value = 0;
+ }
+ value &= AR_BTCOEX_CTRL_MCI_MODE_EN;
+ break;
+ case MCI_STATE_INIT_GPM_OFFSET:
+ value = MS(REG_READ(ah, AR_MCI_GPM_1), AR_MCI_GPM_WRITE_PTR);
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI GPM initial WRITE_PTR=%d\n", value);
+ mci->gpm_idx = value;
+ break;
+ case MCI_STATE_NEXT_GPM_OFFSET:
+ case MCI_STATE_LAST_GPM_OFFSET:
+ /*
+ * This could be useful to avoid new GPM message interrupt which
+ * may lead to spurious interrupt after power sleep, or multiple
+ * entry of ath_mci_intr().
+ * Adding empty GPM check by returning HAL_MCI_GPM_INVALID can
+ * alleviate this effect, but clearing GPM RX interrupt bit is
+ * safe, because whether this is called from hw or driver code
+ * there must be an interrupt bit set/triggered initially
+ */
+ REG_WRITE(ah, AR_MCI_INTERRUPT_RX_MSG_RAW,
+ AR_MCI_INTERRUPT_RX_MSG_GPM);
+
+ gpm_ptr = MS(REG_READ(ah, AR_MCI_GPM_1), AR_MCI_GPM_WRITE_PTR);
+ value = gpm_ptr;
+
+ if (value == 0)
+ value = mci->gpm_len - 1;
+ else if (value >= mci->gpm_len) {
+ if (value != 0xFFFF) {
+ value = 0;
+ ath_dbg(common, ATH_DBG_MCI, "MCI GPM offset"
+ "out of range\n");
+ }
+ } else
+ value--;
+
+ if (value == 0xFFFF) {
+ value = MCI_GPM_INVALID;
+ more_gpm = MCI_GPM_NOMORE;
+ ath_dbg(common, ATH_DBG_MCI, "MCI GPM ptr invalid"
+ "@ptr=%d, offset=%d, more=GPM_NOMORE\n",
+ gpm_ptr, value);
+ } else if (state_type == MCI_STATE_NEXT_GPM_OFFSET) {
+
+ if (gpm_ptr == mci->gpm_idx) {
+ value = MCI_GPM_INVALID;
+ more_gpm = MCI_GPM_NOMORE;
+
+ ath_dbg(common, ATH_DBG_MCI, "MCI GPM message"
+ "not available @ptr=%d, @offset=%d,"
+ "more=GPM_NOMORE\n", gpm_ptr, value);
+ } else {
+ for (;;) {
+
+ u32 temp_index;
+
+ /* skip reserved GPM if any */
+
+ if (value != mci->gpm_idx)
+ more_gpm = MCI_GPM_MORE;
+ else
+ more_gpm = MCI_GPM_NOMORE;
+
+ temp_index = mci->gpm_idx;
+ mci->gpm_idx++;
+
+ if (mci->gpm_idx >=
+ mci->gpm_len)
+ mci->gpm_idx = 0;
+
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI GPM message got ptr=%d,"
+ "@offset=%d, more=%d\n",
+ gpm_ptr, temp_index,
+ (more_gpm == MCI_GPM_MORE));
+
+ if (ar9003_mci_is_gpm_valid(ah,
+ temp_index)) {
+ value = temp_index;
+ break;
+ }
+
+ if (more_gpm == MCI_GPM_NOMORE) {
+ value = MCI_GPM_INVALID;
+ break;
+ }
+ }
+ }
+ if (p_data)
+ *p_data = more_gpm;
+ }
+
+ if (value != MCI_GPM_INVALID)
+ value <<= 4;
+
+ break;
+ case MCI_STATE_LAST_SCHD_MSG_OFFSET:
+ value = MS(REG_READ(ah, AR_MCI_RX_STATUS),
+ AR_MCI_RX_LAST_SCHD_MSG_INDEX);
+ /* Make it in bytes */
+ value <<= 4;
+ break;
+
+ case MCI_STATE_REMOTE_SLEEP:
+ value = MS(REG_READ(ah, AR_MCI_RX_STATUS),
+ AR_MCI_RX_REMOTE_SLEEP) ?
+ MCI_BT_SLEEP : MCI_BT_AWAKE;
+ break;
+
+ case MCI_STATE_CONT_RSSI_POWER:
+ value = MS(mci->cont_status, AR_MCI_CONT_RSSI_POWER);
+ break;
+
+ case MCI_STATE_CONT_PRIORITY:
+ value = MS(mci->cont_status, AR_MCI_CONT_RRIORITY);
+ break;
+
+ case MCI_STATE_CONT_TXRX:
+ value = MS(mci->cont_status, AR_MCI_CONT_TXRX);
+ break;
+
+ case MCI_STATE_BT:
+ value = mci->bt_state;
+ break;
+
+ case MCI_STATE_SET_BT_SLEEP:
+ mci->bt_state = MCI_BT_SLEEP;
+ break;
+
+ case MCI_STATE_SET_BT_AWAKE:
+ mci->bt_state = MCI_BT_AWAKE;
+ ar9003_mci_send_coex_version_query(ah, true);
+ ar9003_mci_send_coex_wlan_channels(ah, true);
+
+ if (mci->unhalt_bt_gpm) {
+
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI unhalt BT GPM\n");
+ ar9003_mci_send_coex_halt_bt_gpm(ah, false, true);
+ }
+
+ ar9003_mci_2g5g_switch(ah, true);
+ break;
+
+ case MCI_STATE_SET_BT_CAL_START:
+ mci->bt_state = MCI_BT_CAL_START;
+ break;
+
+ case MCI_STATE_SET_BT_CAL:
+ mci->bt_state = MCI_BT_CAL;
+ break;
+
+ case MCI_STATE_RESET_REQ_WAKE:
+ ar9003_mci_reset_req_wakeup(ah);
+ mci->update_2g5g = true;
+
+ if ((AR_SREV_9462_20_OR_LATER(ah)) &&
+ (mci->config & ATH_MCI_CONFIG_MCI_OBS_MASK)) {
+ /* Check if we still have control of the GPIOs */
+ if ((REG_READ(ah, AR_GLB_GPIO_CONTROL) &
+ ATH_MCI_CONFIG_MCI_OBS_GPIO) !=
+ ATH_MCI_CONFIG_MCI_OBS_GPIO) {
+
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI reconfigure observation");
+ ar9003_mci_observation_set_up(ah);
+ }
+ }
+ break;
+
+ case MCI_STATE_SEND_WLAN_COEX_VERSION:
+ ar9003_mci_send_coex_version_response(ah, true);
+ break;
+
+ case MCI_STATE_SET_BT_COEX_VERSION:
+
+ if (!p_data)
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI Set BT Coex version with NULL data!!\n");
+ else {
+ mci->bt_ver_major = (*p_data >> 8) & 0xff;
+ mci->bt_ver_minor = (*p_data) & 0xff;
+ mci->bt_version_known = true;
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI BT version set: %d.%d\n",
+ mci->bt_ver_major,
+ mci->bt_ver_minor);
+ }
+ break;
+
+ case MCI_STATE_SEND_WLAN_CHANNELS:
+ if (p_data) {
+ if (((mci->wlan_channels[1] & 0xffff0000) ==
+ (*(p_data + 1) & 0xffff0000)) &&
+ (mci->wlan_channels[2] == *(p_data + 2)) &&
+ (mci->wlan_channels[3] == *(p_data + 3)))
+ break;
+
+ mci->wlan_channels[0] = *p_data++;
+ mci->wlan_channels[1] = *p_data++;
+ mci->wlan_channels[2] = *p_data++;
+ mci->wlan_channels[3] = *p_data++;
+ }
+ mci->wlan_channels_update = true;
+ ar9003_mci_send_coex_wlan_channels(ah, true);
+ break;
+
+ case MCI_STATE_SEND_VERSION_QUERY:
+ ar9003_mci_send_coex_version_query(ah, true);
+ break;
+
+ case MCI_STATE_SEND_STATUS_QUERY:
+ query_type = (AR_SREV_9462_10(ah)) ?
+ MCI_GPM_COEX_QUERY_BT_ALL_INFO :
+ MCI_GPM_COEX_QUERY_BT_TOPOLOGY;
+
+ ar9003_mci_send_coex_bt_status_query(ah, true, query_type);
+ break;
+
+ case MCI_STATE_NEED_FLUSH_BT_INFO:
+ /*
+ * btcoex_hw.mci.unhalt_bt_gpm means whether it's
+ * needed to send UNHALT message. It's set whenever
+ * there's a request to send HALT message.
+ * mci_halted_bt_gpm means whether HALT message is sent
+ * out successfully.
+ *
+ * Checking (mci_unhalt_bt_gpm == false) instead of
+ * checking (ah->mci_halted_bt_gpm == false) will make
+ * sure currently is in UNHALT-ed mode and BT can
+ * respond to status query.
+ */
+ value = (!mci->unhalt_bt_gpm &&
+ mci->need_flush_btinfo) ? 1 : 0;
+ if (p_data)
+ mci->need_flush_btinfo =
+ (*p_data != 0) ? true : false;
+ break;
+
+ case MCI_STATE_RECOVER_RX:
+
+ ath_dbg(common, ATH_DBG_MCI, "MCI hw RECOVER_RX\n");
+ ar9003_mci_prep_interface(ah);
+ mci->query_bt = true;
+ mci->need_flush_btinfo = true;
+ ar9003_mci_send_coex_wlan_channels(ah, true);
+ ar9003_mci_2g5g_switch(ah, true);
+ break;
+
+ case MCI_STATE_NEED_FTP_STOMP:
+ value = !(mci->config & ATH_MCI_CONFIG_DISABLE_FTP_STOMP);
+ break;
+
+ case MCI_STATE_NEED_TUNING:
+ value = !(mci->config & ATH_MCI_CONFIG_DISABLE_TUNING);
+ break;
+
+ default:
+ break;
+
+ }
+
+ return value;
+}
+EXPORT_SYMBOL(ar9003_mci_state);
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index cd43d59..c9c3b18 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -1203,6 +1203,32 @@ void ath9k_ani_reset(struct ath_hw *ah, bool is_scanning);
void ath9k_hw_proc_mib_event(struct ath_hw *ah);
void ath9k_hw_ani_monitor(struct ath_hw *ah, struct ath9k_channel *chan);

+bool ar9003_mci_send_message(struct ath_hw *ah, u8 header, u32 flag,
+ u32 *payload, u8 len, bool wait_done,
+ bool check_bt);
+void ar9003_mci_mute_bt(struct ath_hw *ah);
+u32 ar9003_mci_state(struct ath_hw *ah, u32 state_type, u32 *p_data);
+void ar9003_mci_setup(struct ath_hw *ah, u32 gpm_addr, void *gpm_buf,
+ u16 len, u32 sched_addr);
+void ar9003_mci_cleanup(struct ath_hw *ah);
+void ar9003_mci_send_coex_halt_bt_gpm(struct ath_hw *ah, bool halt,
+ bool wait_done);
+u32 ar9003_mci_wait_for_gpm(struct ath_hw *ah, u8 gpm_type,
+ u8 gpm_opcode, int time_out);
+void ar9003_mci_2g5g_changed(struct ath_hw *ah, bool is_2g);
+void ar9003_mci_disable_interrupt(struct ath_hw *ah);
+void ar9003_mci_enable_interrupt(struct ath_hw *ah);
+void ar9003_mci_2g5g_switch(struct ath_hw *ah, bool wait_done);
+void ar9003_mci_reset(struct ath_hw *ah, bool en_int, bool is_2g,
+ bool is_full_sleep);
+bool ar9003_mci_check_int(struct ath_hw *ah, u32 ints);
+void ar9003_mci_remote_reset(struct ath_hw *ah, bool wait_done);
+void ar9003_mci_send_sys_waking(struct ath_hw *ah, bool wait_done);
+void ar9003_mci_send_lna_transfer(struct ath_hw *ah, bool wait_done);
+void ar9003_mci_sync_bt_state(struct ath_hw *ah);
+void ar9003_mci_get_interrupt(struct ath_hw *ah, u32 *raw_intr,
+ u32 *rx_msg_intr);
+
#define ATH9K_CLOCK_RATE_CCK 22
#define ATH9K_CLOCK_RATE_5GHZ_OFDM 40
#define ATH9K_CLOCK_RATE_2GHZ_OFDM 44
--
1.7.0.4