Hi all,
Has any one used ar9390 based devices as an AP? I'm trying, but all
fails when I load hostapd:
ath9k 0000:01:00.0: mon.wlan0: Features changed: 0x00004800 -> 0x00004000
ath: Unable to reset hardware; reset status -5 (freq 2412 MHz)
Could not set interface mon.wlan0 flags: Input/output error
nl80211: Failed to set interface wlan0 into AP mode
nl80211 driver initialization failed.
ELOOP: remaining socket: sock=8 eloop_data=0x10219770
user_data=0x10219d18 handler=0x1002b8c0
ELOOP: remaining socket: sock=10 eloop_data=0x1021c0b8 user_data=(nil)
handler=0x100353e0
With iw, it seems that AP is part of the capabilities:
iw phy phy0 info
Wiphy phy0
Band 1:
Capabilities: 0x11ef
RX LDPC
HT20/HT40
SM Power Save disabled
RX HT20 SGI
RX HT40 SGI
TX STBC
RX STBC 1-stream
Max AMSDU length: 3839 bytes
DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 8 usec (0x06)
HT TX/RX MCS rate indexes supported: 0-23
Frequencies:
* 2412 MHz [1] (17.0 dBm)
* 2417 MHz [2] (17.0 dBm)
* 2422 MHz [3] (17.0 dBm)
* 2427 MHz [4] (17.0 dBm)
* 2432 MHz [5] (17.0 dBm)
* 2437 MHz [6] (17.0 dBm)
* 2442 MHz [7] (17.0 dBm)
* 2447 MHz [8] (17.0 dBm)
* 2452 MHz [9] (17.0 dBm)
* 2457 MHz [10] (17.0 dBm)
* 2462 MHz [11] (17.0 dBm)
* 2467 MHz [12] (disabled)
* 2472 MHz [13] (disabled)
* 2484 MHz [14] (disabled)
Bitrates (non-HT):
* 1.0 Mbps
* 2.0 Mbps (short preamble supported)
* 5.5 Mbps (short preamble supported)
* 11.0 Mbps (short preamble supported)
* 6.0 Mbps
* 9.0 Mbps
* 12.0 Mbps
* 18.0 Mbps
* 24.0 Mbps
* 36.0 Mbps
* 48.0 Mbps
* 54.0 Mbps
Band 2:
Capabilities: 0x11ef
RX LDPC
HT20/HT40
SM Power Save disabled
RX HT20 SGI
RX HT40 SGI
TX STBC
RX STBC 1-stream
Max AMSDU length: 3839 bytes
DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 8 usec (0x06)
HT TX/RX MCS rate indexes supported: 0-23
Frequencies:
* 5180 MHz [36] (18.0 dBm) (passive scanning, no IBSS)
* 5200 MHz [40] (18.0 dBm) (passive scanning, no IBSS)
* 5220 MHz [44] (18.0 dBm) (passive scanning, no IBSS)
* 5240 MHz [48] (18.0 dBm) (passive scanning, no IBSS)
* 5260 MHz [52] (disabled)
* 5280 MHz [56] (disabled)
* 5300 MHz [60] (disabled)
* 5320 MHz [64] (disabled)
* 5500 MHz [100] (disabled)
* 5520 MHz [104] (disabled)
* 5540 MHz [108] (disabled)
* 5560 MHz [112] (disabled)
* 5580 MHz [116] (disabled)
* 5600 MHz [120] (disabled)
* 5620 MHz [124] (disabled)
* 5640 MHz [128] (disabled)
* 5660 MHz [132] (disabled)
* 5680 MHz [136] (disabled)
* 5700 MHz [140] (disabled)
* 5745 MHz [149] (18.0 dBm) (passive scanning, no IBSS)
* 5765 MHz [153] (18.0 dBm) (passive scanning, no IBSS)
* 5785 MHz [157] (18.0 dBm) (passive scanning, no IBSS)
* 5805 MHz [161] (18.0 dBm) (passive scanning, no IBSS)
* 5825 MHz [165] (18.0 dBm) (passive scanning, no IBSS)
Bitrates (non-HT):
* 6.0 Mbps
* 9.0 Mbps
* 12.0 Mbps
* 18.0 Mbps
* 24.0 Mbps
* 36.0 Mbps
* 48.0 Mbps
* 54.0 Mbps
max # scan SSIDs: 4
max scan IEs length: 2257 bytes
Coverage class: 0 (up to 0m)
Available Antennas: TX 0 RX 0
Supported interface modes:
* IBSS
* managed
* AP
* AP/VLAN
* WDS
* monitor
* mesh point
* P2P-client
* P2P-GO
Supported commands:
* new_interface
* set_interface
* new_key
* new_beacon
* new_station
* new_mpath
* set_mesh_params
* set_bss
* authenticate
* associate
* deauthenticate
* disassociate
* join_ibss
* join_mesh
* remain_on_channel
* set_tx_bitrate_mask
* action
* frame_wait_cancel
* set_wiphy_netns
* set_channel
* set_wds_peer
* connect
* disconnect
Supported TX frame types:
* IBSS: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050
0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
* managed: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050
0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
* AP: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050
0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
* AP/VLAN: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050
0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
* mesh point: 0x0000 0x0010 0x0020 0x0030 0x0040
0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0
0x00f0
* P2P-client: 0x0000 0x0010 0x0020 0x0030 0x0040
0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0
0x00f0
* P2P-GO: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050
0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
Supported RX frame types:
* IBSS: 0x00d0
* managed: 0x0040 0x00d0
* AP: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0
* AP/VLAN: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0
* mesh point: 0x00b0 0x00c0 0x00d0
* P2P-client: 0x0040 0x00d0
* P2P-GO: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0
Has anyone experienced something like this? Can this be related to my
hostapd config, or is this driver issue?
br, Sami
Ok, this doesn't seem to interest anyone in the wireless list.
Hopefully someone cares to respond from the ath9k list..
I experience this problem with station mode too. I get
ath: Unable to reset hardware; reset status -5 (freq 2412 MHz)
Could not set interface wlan0 flags: Input/output error
Could not set interface 'wlan0' UP
when starting wpa_supplicant. Could it be that ar9390 isn't really
supported by ath9k driver? I have quite recent compat wireless drivers
in use:
Compat-wireless backport release: compat-wireless-v3.1-rc8-1
Backport based on linux-2.6-allstable.git v3.1-rc8
Has anyone managed to use ar9390 in linux?
---------- Forwarded message ----------
From: wireless newbie <[email protected]>
Date: 2011/11/11
Subject: ar9390 Support for master mode?
To: [email protected]
Hi all,
Has any one used ar9390 based devices as an AP? I'm trying, but all
fails when I load hostapd:
ath9k 0000:01:00.0: mon.wlan0: Features changed: 0x00004800 -> 0x00004000
ath: Unable to reset hardware; reset status -5 (freq 2412 MHz)
Could not set interface mon.wlan0 flags: Input/output error
nl80211: Failed to set interface wlan0 into AP mode
nl80211 driver initialization failed.
ELOOP: remaining socket: sock=8 eloop_data=0x10219770
user_data=0x10219d18 handler=0x1002b8c0
ELOOP: remaining socket: sock=10 eloop_data=0x1021c0b8 user_data=(nil)
handler=0x100353e0
With iw, it seems that AP is part of the capabilities:
iw phy phy0 info
Wiphy phy0
? ? ? ?Band 1:
? ? ? ? ? ? ? ?Capabilities: 0x11ef
? ? ? ? ? ? ? ? ? ? ? ?RX LDPC
? ? ? ? ? ? ? ? ? ? ? ?HT20/HT40
? ? ? ? ? ? ? ? ? ? ? ?SM Power Save disabled
? ? ? ? ? ? ? ? ? ? ? ?RX HT20 SGI
? ? ? ? ? ? ? ? ? ? ? ?RX HT40 SGI
? ? ? ? ? ? ? ? ? ? ? ?TX STBC
? ? ? ? ? ? ? ? ? ? ? ?RX STBC 1-stream
? ? ? ? ? ? ? ? ? ? ? ?Max AMSDU length: 3839 bytes
? ? ? ? ? ? ? ? ? ? ? ?DSSS/CCK HT40
? ? ? ? ? ? ? ?Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
? ? ? ? ? ? ? ?Minimum RX AMPDU time spacing: 8 usec (0x06)
? ? ? ? ? ? ? ?HT TX/RX MCS rate indexes supported: 0-23
? ? ? ? ? ? ? ?Frequencies:
? ? ? ? ? ? ? ? ? ? ? ?* 2412 MHz [1] (17.0 dBm)
? ? ? ? ? ? ? ? ? ? ? ?* 2417 MHz [2] (17.0 dBm)
? ? ? ? ? ? ? ? ? ? ? ?* 2422 MHz [3] (17.0 dBm)
? ? ? ? ? ? ? ? ? ? ? ?* 2427 MHz [4] (17.0 dBm)
? ? ? ? ? ? ? ? ? ? ? ?* 2432 MHz [5] (17.0 dBm)
? ? ? ? ? ? ? ? ? ? ? ?* 2437 MHz [6] (17.0 dBm)
? ? ? ? ? ? ? ? ? ? ? ?* 2442 MHz [7] (17.0 dBm)
? ? ? ? ? ? ? ? ? ? ? ?* 2447 MHz [8] (17.0 dBm)
? ? ? ? ? ? ? ? ? ? ? ?* 2452 MHz [9] (17.0 dBm)
? ? ? ? ? ? ? ? ? ? ? ?* 2457 MHz [10] (17.0 dBm)
? ? ? ? ? ? ? ? ? ? ? ?* 2462 MHz [11] (17.0 dBm)
? ? ? ? ? ? ? ? ? ? ? ?* 2467 MHz [12] (disabled)
? ? ? ? ? ? ? ? ? ? ? ?* 2472 MHz [13] (disabled)
? ? ? ? ? ? ? ? ? ? ? ?* 2484 MHz [14] (disabled)
? ? ? ? ? ? ? ?Bitrates (non-HT):
? ? ? ? ? ? ? ? ? ? ? ?* 1.0 Mbps
? ? ? ? ? ? ? ? ? ? ? ?* 2.0 Mbps (short preamble supported)
? ? ? ? ? ? ? ? ? ? ? ?* 5.5 Mbps (short preamble supported)
? ? ? ? ? ? ? ? ? ? ? ?* 11.0 Mbps (short preamble supported)
? ? ? ? ? ? ? ? ? ? ? ?* 6.0 Mbps
? ? ? ? ? ? ? ? ? ? ? ?* 9.0 Mbps
? ? ? ? ? ? ? ? ? ? ? ?* 12.0 Mbps
? ? ? ? ? ? ? ? ? ? ? ?* 18.0 Mbps
? ? ? ? ? ? ? ? ? ? ? ?* 24.0 Mbps
? ? ? ? ? ? ? ? ? ? ? ?* 36.0 Mbps
? ? ? ? ? ? ? ? ? ? ? ?* 48.0 Mbps
? ? ? ? ? ? ? ? ? ? ? ?* 54.0 Mbps
? ? ? ?Band 2:
? ? ? ? ? ? ? ?Capabilities: 0x11ef
? ? ? ? ? ? ? ? ? ? ? ?RX LDPC
? ? ? ? ? ? ? ? ? ? ? ?HT20/HT40
? ? ? ? ? ? ? ? ? ? ? ?SM Power Save disabled
? ? ? ? ? ? ? ? ? ? ? ?RX HT20 SGI
? ? ? ? ? ? ? ? ? ? ? ?RX HT40 SGI
? ? ? ? ? ? ? ? ? ? ? ?TX STBC
? ? ? ? ? ? ? ? ? ? ? ?RX STBC 1-stream
? ? ? ? ? ? ? ? ? ? ? ?Max AMSDU length: 3839 bytes
? ? ? ? ? ? ? ? ? ? ? ?DSSS/CCK HT40
? ? ? ? ? ? ? ?Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
? ? ? ? ? ? ? ?Minimum RX AMPDU time spacing: 8 usec (0x06)
? ? ? ? ? ? ? ?HT TX/RX MCS rate indexes supported: 0-23
? ? ? ? ? ? ? ?Frequencies:
? ? ? ? ? ? ? ? ? ? ? ?* 5180 MHz [36] (18.0 dBm) (passive scanning, no IBSS)
? ? ? ? ? ? ? ? ? ? ? ?* 5200 MHz [40] (18.0 dBm) (passive scanning, no IBSS)
? ? ? ? ? ? ? ? ? ? ? ?* 5220 MHz [44] (18.0 dBm) (passive scanning, no IBSS)
? ? ? ? ? ? ? ? ? ? ? ?* 5240 MHz [48] (18.0 dBm) (passive scanning, no IBSS)
? ? ? ? ? ? ? ? ? ? ? ?* 5260 MHz [52] (disabled)
? ? ? ? ? ? ? ? ? ? ? ?* 5280 MHz [56] (disabled)
? ? ? ? ? ? ? ? ? ? ? ?* 5300 MHz [60] (disabled)
? ? ? ? ? ? ? ? ? ? ? ?* 5320 MHz [64] (disabled)
? ? ? ? ? ? ? ? ? ? ? ?* 5500 MHz [100] (disabled)
? ? ? ? ? ? ? ? ? ? ? ?* 5520 MHz [104] (disabled)
? ? ? ? ? ? ? ? ? ? ? ?* 5540 MHz [108] (disabled)
? ? ? ? ? ? ? ? ? ? ? ?* 5560 MHz [112] (disabled)
? ? ? ? ? ? ? ? ? ? ? ?* 5580 MHz [116] (disabled)
? ? ? ? ? ? ? ? ? ? ? ?* 5600 MHz [120] (disabled)
? ? ? ? ? ? ? ? ? ? ? ?* 5620 MHz [124] (disabled)
? ? ? ? ? ? ? ? ? ? ? ?* 5640 MHz [128] (disabled)
? ? ? ? ? ? ? ? ? ? ? ?* 5660 MHz [132] (disabled)
? ? ? ? ? ? ? ? ? ? ? ?* 5680 MHz [136] (disabled)
? ? ? ? ? ? ? ? ? ? ? ?* 5700 MHz [140] (disabled)
? ? ? ? ? ? ? ? ? ? ? ?* 5745 MHz [149] (18.0 dBm) (passive scanning, no IBSS)
? ? ? ? ? ? ? ? ? ? ? ?* 5765 MHz [153] (18.0 dBm) (passive scanning, no IBSS)
? ? ? ? ? ? ? ? ? ? ? ?* 5785 MHz [157] (18.0 dBm) (passive scanning, no IBSS)
? ? ? ? ? ? ? ? ? ? ? ?* 5805 MHz [161] (18.0 dBm) (passive scanning, no IBSS)
? ? ? ? ? ? ? ? ? ? ? ?* 5825 MHz [165] (18.0 dBm) (passive scanning, no IBSS)
? ? ? ? ? ? ? ?Bitrates (non-HT):
? ? ? ? ? ? ? ? ? ? ? ?* 6.0 Mbps
? ? ? ? ? ? ? ? ? ? ? ?* 9.0 Mbps
? ? ? ? ? ? ? ? ? ? ? ?* 12.0 Mbps
? ? ? ? ? ? ? ? ? ? ? ?* 18.0 Mbps
? ? ? ? ? ? ? ? ? ? ? ?* 24.0 Mbps
? ? ? ? ? ? ? ? ? ? ? ?* 36.0 Mbps
? ? ? ? ? ? ? ? ? ? ? ?* 48.0 Mbps
? ? ? ? ? ? ? ? ? ? ? ?* 54.0 Mbps
? ? ? ?max # scan SSIDs: 4
? ? ? ?max scan IEs length: 2257 bytes
? ? ? ?Coverage class: 0 (up to 0m)
? ? ? ?Available Antennas: TX 0 RX 0
? ? ? ?Supported interface modes:
? ? ? ? ? ? ? ? * IBSS
? ? ? ? ? ? ? ? * managed
? ? ? ? ? ? ? ? * AP
? ? ? ? ? ? ? ? * AP/VLAN
? ? ? ? ? ? ? ? * WDS
? ? ? ? ? ? ? ? * monitor
? ? ? ? ? ? ? ? * mesh point
? ? ? ? ? ? ? ? * P2P-client
? ? ? ? ? ? ? ? * P2P-GO
? ? ? ?Supported commands:
? ? ? ? ? ? ? ? * new_interface
? ? ? ? ? ? ? ? * set_interface
? ? ? ? ? ? ? ? * new_key
? ? ? ? ? ? ? ? * new_beacon
? ? ? ? ? ? ? ? * new_station
? ? ? ? ? ? ? ? * new_mpath
? ? ? ? ? ? ? ? * set_mesh_params
? ? ? ? ? ? ? ? * set_bss
? ? ? ? ? ? ? ? * authenticate
? ? ? ? ? ? ? ? * associate
? ? ? ? ? ? ? ? * deauthenticate
? ? ? ? ? ? ? ? * disassociate
? ? ? ? ? ? ? ? * join_ibss
? ? ? ? ? ? ? ? * join_mesh
? ? ? ? ? ? ? ? * remain_on_channel
? ? ? ? ? ? ? ? * set_tx_bitrate_mask
? ? ? ? ? ? ? ? * action
? ? ? ? ? ? ? ? * frame_wait_cancel
? ? ? ? ? ? ? ? * set_wiphy_netns
? ? ? ? ? ? ? ? * set_channel
? ? ? ? ? ? ? ? * set_wds_peer
? ? ? ? ? ? ? ? * connect
? ? ? ? ? ? ? ? * disconnect
? ? ? ?Supported TX frame types:
? ? ? ? ? ? ? ? * IBSS: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050
0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
? ? ? ? ? ? ? ? * managed: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050
0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
? ? ? ? ? ? ? ? * AP: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050
0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
? ? ? ? ? ? ? ? * AP/VLAN: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050
0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
? ? ? ? ? ? ? ? * mesh point: 0x0000 0x0010 0x0020 0x0030 0x0040
0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0
0x00f0
? ? ? ? ? ? ? ? * P2P-client: 0x0000 0x0010 0x0020 0x0030 0x0040
0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0
0x00f0
? ? ? ? ? ? ? ? * P2P-GO: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050
0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
? ? ? ?Supported RX frame types:
? ? ? ? ? ? ? ? * IBSS: 0x00d0
? ? ? ? ? ? ? ? * managed: 0x0040 0x00d0
? ? ? ? ? ? ? ? * AP: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0
? ? ? ? ? ? ? ? * AP/VLAN: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0
? ? ? ? ? ? ? ? * mesh point: 0x00b0 0x00c0 0x00d0
? ? ? ? ? ? ? ? * P2P-client: 0x0040 0x00d0
? ? ? ? ? ? ? ? * P2P-GO: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0
Has anyone experienced something like this? Can this be related to my
hostapd config, or is this driver issue?
br, Sami
Extending timeout to ten times longer didn't help. Anyone with
knowledge of internals of ar9390? Is that register correct?
2011/11/15 wireless newbie <[email protected]>:
> I tried (almost) bleeding edge compat wireless drivers (dated
> 1.11.2011) but the same problem persists. It turns out that the
> problem is in AGC calibration in function ar9003_hw_init_cal. It times
> out. This is what ath9k_hw_wait prints to log:
>
> ath: timeout (100000 us) on reg 0xa2c4: 0x00158dd9 & 0x00000001 != 0x00000000
>
> Is there anyone who has so much knowledge that he/she could verify if
> those values make sense with this chip (ar9390)? I would like to rule
> out the possibility that the driver is polling a bit in a wrong
> register. Or could it be that the timeout value needs to be extended?
>
> Thanks.
>
> 2011/11/14 wireless newbie <[email protected]>:
>> Ok, this doesn't seem to interest anyone in the wireless list.
>> Hopefully someone cares to respond from the ath9k list..
>>
>> I experience this problem with station mode too. I get
>>
>> ath: Unable to reset hardware; reset status -5 (freq 2412 MHz)
>> Could not set interface wlan0 flags: Input/output error
>> Could not set interface 'wlan0' UP
>>
>> when starting wpa_supplicant. Could it be that ar9390 isn't really
>> supported by ath9k driver? I have quite recent compat wireless drivers
>> in use:
>>
>> Compat-wireless backport release: compat-wireless-v3.1-rc8-1
>> Backport based on linux-2.6-allstable.git v3.1-rc8
>>
>> Has anyone managed to use ar9390 in linux?
>>
>>
>>
>> ---------- Forwarded message ----------
>> From: wireless newbie <[email protected]>
>> Date: 2011/11/11
>> Subject: ar9390 Support for master mode?
>> To: [email protected]
>>
>>
>> Hi all,
>>
>> Has any one used ar9390 based devices as an AP? I'm trying, but all
>> fails when I load hostapd:
>>
>> ath9k 0000:01:00.0: mon.wlan0: Features changed: 0x00004800 -> 0x00004000
>> ath: Unable to reset hardware; reset status -5 (freq 2412 MHz)
>> Could not set interface mon.wlan0 flags: Input/output error
>> nl80211: Failed to set interface wlan0 into AP mode
>> nl80211 driver initialization failed.
>> ELOOP: remaining socket: sock=8 eloop_data=0x10219770
>> user_data=0x10219d18 handler=0x1002b8c0
>> ELOOP: remaining socket: sock=10 eloop_data=0x1021c0b8 user_data=(nil)
>> handler=0x100353e0
>>
>> With iw, it seems that AP is part of the capabilities:
>>
>> iw phy phy0 info
>>
>> Wiphy phy0
>> ? ? ? ?Band 1:
>> ? ? ? ? ? ? ? ?Capabilities: 0x11ef
>> ? ? ? ? ? ? ? ? ? ? ? ?RX LDPC
>> ? ? ? ? ? ? ? ? ? ? ? ?HT20/HT40
>> ? ? ? ? ? ? ? ? ? ? ? ?SM Power Save disabled
>> ? ? ? ? ? ? ? ? ? ? ? ?RX HT20 SGI
>> ? ? ? ? ? ? ? ? ? ? ? ?RX HT40 SGI
>> ? ? ? ? ? ? ? ? ? ? ? ?TX STBC
>> ? ? ? ? ? ? ? ? ? ? ? ?RX STBC 1-stream
>> ? ? ? ? ? ? ? ? ? ? ? ?Max AMSDU length: 3839 bytes
>> ? ? ? ? ? ? ? ? ? ? ? ?DSSS/CCK HT40
>> ? ? ? ? ? ? ? ?Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
>> ? ? ? ? ? ? ? ?Minimum RX AMPDU time spacing: 8 usec (0x06)
>> ? ? ? ? ? ? ? ?HT TX/RX MCS rate indexes supported: 0-23
>> ? ? ? ? ? ? ? ?Frequencies:
>> ? ? ? ? ? ? ? ? ? ? ? ?* 2412 MHz [1] (17.0 dBm)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 2417 MHz [2] (17.0 dBm)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 2422 MHz [3] (17.0 dBm)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 2427 MHz [4] (17.0 dBm)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 2432 MHz [5] (17.0 dBm)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 2437 MHz [6] (17.0 dBm)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 2442 MHz [7] (17.0 dBm)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 2447 MHz [8] (17.0 dBm)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 2452 MHz [9] (17.0 dBm)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 2457 MHz [10] (17.0 dBm)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 2462 MHz [11] (17.0 dBm)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 2467 MHz [12] (disabled)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 2472 MHz [13] (disabled)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 2484 MHz [14] (disabled)
>> ? ? ? ? ? ? ? ?Bitrates (non-HT):
>> ? ? ? ? ? ? ? ? ? ? ? ?* 1.0 Mbps
>> ? ? ? ? ? ? ? ? ? ? ? ?* 2.0 Mbps (short preamble supported)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 5.5 Mbps (short preamble supported)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 11.0 Mbps (short preamble supported)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 6.0 Mbps
>> ? ? ? ? ? ? ? ? ? ? ? ?* 9.0 Mbps
>> ? ? ? ? ? ? ? ? ? ? ? ?* 12.0 Mbps
>> ? ? ? ? ? ? ? ? ? ? ? ?* 18.0 Mbps
>> ? ? ? ? ? ? ? ? ? ? ? ?* 24.0 Mbps
>> ? ? ? ? ? ? ? ? ? ? ? ?* 36.0 Mbps
>> ? ? ? ? ? ? ? ? ? ? ? ?* 48.0 Mbps
>> ? ? ? ? ? ? ? ? ? ? ? ?* 54.0 Mbps
>> ? ? ? ?Band 2:
>> ? ? ? ? ? ? ? ?Capabilities: 0x11ef
>> ? ? ? ? ? ? ? ? ? ? ? ?RX LDPC
>> ? ? ? ? ? ? ? ? ? ? ? ?HT20/HT40
>> ? ? ? ? ? ? ? ? ? ? ? ?SM Power Save disabled
>> ? ? ? ? ? ? ? ? ? ? ? ?RX HT20 SGI
>> ? ? ? ? ? ? ? ? ? ? ? ?RX HT40 SGI
>> ? ? ? ? ? ? ? ? ? ? ? ?TX STBC
>> ? ? ? ? ? ? ? ? ? ? ? ?RX STBC 1-stream
>> ? ? ? ? ? ? ? ? ? ? ? ?Max AMSDU length: 3839 bytes
>> ? ? ? ? ? ? ? ? ? ? ? ?DSSS/CCK HT40
>> ? ? ? ? ? ? ? ?Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
>> ? ? ? ? ? ? ? ?Minimum RX AMPDU time spacing: 8 usec (0x06)
>> ? ? ? ? ? ? ? ?HT TX/RX MCS rate indexes supported: 0-23
>> ? ? ? ? ? ? ? ?Frequencies:
>> ? ? ? ? ? ? ? ? ? ? ? ?* 5180 MHz [36] (18.0 dBm) (passive scanning, no IBSS)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 5200 MHz [40] (18.0 dBm) (passive scanning, no IBSS)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 5220 MHz [44] (18.0 dBm) (passive scanning, no IBSS)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 5240 MHz [48] (18.0 dBm) (passive scanning, no IBSS)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 5260 MHz [52] (disabled)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 5280 MHz [56] (disabled)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 5300 MHz [60] (disabled)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 5320 MHz [64] (disabled)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 5500 MHz [100] (disabled)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 5520 MHz [104] (disabled)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 5540 MHz [108] (disabled)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 5560 MHz [112] (disabled)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 5580 MHz [116] (disabled)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 5600 MHz [120] (disabled)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 5620 MHz [124] (disabled)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 5640 MHz [128] (disabled)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 5660 MHz [132] (disabled)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 5680 MHz [136] (disabled)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 5700 MHz [140] (disabled)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 5745 MHz [149] (18.0 dBm) (passive scanning, no IBSS)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 5765 MHz [153] (18.0 dBm) (passive scanning, no IBSS)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 5785 MHz [157] (18.0 dBm) (passive scanning, no IBSS)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 5805 MHz [161] (18.0 dBm) (passive scanning, no IBSS)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 5825 MHz [165] (18.0 dBm) (passive scanning, no IBSS)
>> ? ? ? ? ? ? ? ?Bitrates (non-HT):
>> ? ? ? ? ? ? ? ? ? ? ? ?* 6.0 Mbps
>> ? ? ? ? ? ? ? ? ? ? ? ?* 9.0 Mbps
>> ? ? ? ? ? ? ? ? ? ? ? ?* 12.0 Mbps
>> ? ? ? ? ? ? ? ? ? ? ? ?* 18.0 Mbps
>> ? ? ? ? ? ? ? ? ? ? ? ?* 24.0 Mbps
>> ? ? ? ? ? ? ? ? ? ? ? ?* 36.0 Mbps
>> ? ? ? ? ? ? ? ? ? ? ? ?* 48.0 Mbps
>> ? ? ? ? ? ? ? ? ? ? ? ?* 54.0 Mbps
>> ? ? ? ?max # scan SSIDs: 4
>> ? ? ? ?max scan IEs length: 2257 bytes
>> ? ? ? ?Coverage class: 0 (up to 0m)
>> ? ? ? ?Available Antennas: TX 0 RX 0
>> ? ? ? ?Supported interface modes:
>> ? ? ? ? ? ? ? ? * IBSS
>> ? ? ? ? ? ? ? ? * managed
>> ? ? ? ? ? ? ? ? * AP
>> ? ? ? ? ? ? ? ? * AP/VLAN
>> ? ? ? ? ? ? ? ? * WDS
>> ? ? ? ? ? ? ? ? * monitor
>> ? ? ? ? ? ? ? ? * mesh point
>> ? ? ? ? ? ? ? ? * P2P-client
>> ? ? ? ? ? ? ? ? * P2P-GO
>> ? ? ? ?Supported commands:
>> ? ? ? ? ? ? ? ? * new_interface
>> ? ? ? ? ? ? ? ? * set_interface
>> ? ? ? ? ? ? ? ? * new_key
>> ? ? ? ? ? ? ? ? * new_beacon
>> ? ? ? ? ? ? ? ? * new_station
>> ? ? ? ? ? ? ? ? * new_mpath
>> ? ? ? ? ? ? ? ? * set_mesh_params
>> ? ? ? ? ? ? ? ? * set_bss
>> ? ? ? ? ? ? ? ? * authenticate
>> ? ? ? ? ? ? ? ? * associate
>> ? ? ? ? ? ? ? ? * deauthenticate
>> ? ? ? ? ? ? ? ? * disassociate
>> ? ? ? ? ? ? ? ? * join_ibss
>> ? ? ? ? ? ? ? ? * join_mesh
>> ? ? ? ? ? ? ? ? * remain_on_channel
>> ? ? ? ? ? ? ? ? * set_tx_bitrate_mask
>> ? ? ? ? ? ? ? ? * action
>> ? ? ? ? ? ? ? ? * frame_wait_cancel
>> ? ? ? ? ? ? ? ? * set_wiphy_netns
>> ? ? ? ? ? ? ? ? * set_channel
>> ? ? ? ? ? ? ? ? * set_wds_peer
>> ? ? ? ? ? ? ? ? * connect
>> ? ? ? ? ? ? ? ? * disconnect
>> ? ? ? ?Supported TX frame types:
>> ? ? ? ? ? ? ? ? * IBSS: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050
>> 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
>> ? ? ? ? ? ? ? ? * managed: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050
>> 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
>> ? ? ? ? ? ? ? ? * AP: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050
>> 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
>> ? ? ? ? ? ? ? ? * AP/VLAN: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050
>> 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
>> ? ? ? ? ? ? ? ? * mesh point: 0x0000 0x0010 0x0020 0x0030 0x0040
>> 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0
>> 0x00f0
>> ? ? ? ? ? ? ? ? * P2P-client: 0x0000 0x0010 0x0020 0x0030 0x0040
>> 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0
>> 0x00f0
>> ? ? ? ? ? ? ? ? * P2P-GO: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050
>> 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
>> ? ? ? ?Supported RX frame types:
>> ? ? ? ? ? ? ? ? * IBSS: 0x00d0
>> ? ? ? ? ? ? ? ? * managed: 0x0040 0x00d0
>> ? ? ? ? ? ? ? ? * AP: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0
>> ? ? ? ? ? ? ? ? * AP/VLAN: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0
>> ? ? ? ? ? ? ? ? * mesh point: 0x00b0 0x00c0 0x00d0
>> ? ? ? ? ? ? ? ? * P2P-client: 0x0040 0x00d0
>> ? ? ? ? ? ? ? ? * P2P-GO: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0
>>
>> Has anyone experienced something like this? Can this be related to my
>> hostapd config, or is this driver issue?
>>
>> br, Sami
>>
>
That fix is already in place but it didn't help.
2011/11/15 Mohammed Shafi <[email protected]>:
> On Tue, Nov 15, 2011 at 1:45 PM, wireless newbie <[email protected]> wrote:
>> I tried (almost) bleeding edge compat wireless drivers (dated
>> 1.11.2011) but the same problem persists. It turns out that the
>> problem is in AGC calibration in function ar9003_hw_init_cal. It times
>> out. This is what ath9k_hw_wait prints to log:
>>
>> ath: timeout (100000 us) on reg 0xa2c4: 0x00158dd9 & 0x00000001 != 0x00000000
>
> a similar problem addressed by
> http://permalink.gmane.org/gmane.linux.kernel.wireless.general/78758
> and this fix is there in bleeding edge compat(today). did it help?
>
>>
>> Is there anyone who has so much knowledge that he/she could verify if
>> those values make sense with this chip (ar9390)? I would like to rule
>> out the possibility that the driver is polling a bit in a wrong
>> register. Or could it be that the timeout value needs to be extended?
>>
>> Thanks.
>>
>> 2011/11/14 wireless newbie <[email protected]>:
>>> Ok, this doesn't seem to interest anyone in the wireless list.
>>> Hopefully someone cares to respond from the ath9k list..
>>>
>>> I experience this problem with station mode too. I get
>>>
>>> ath: Unable to reset hardware; reset status -5 (freq 2412 MHz)
>>> Could not set interface wlan0 flags: Input/output error
>>> Could not set interface 'wlan0' UP
>>>
>>> when starting wpa_supplicant. Could it be that ar9390 isn't really
>>> supported by ath9k driver? I have quite recent compat wireless drivers
>>> in use:
>>>
>>> Compat-wireless backport release: compat-wireless-v3.1-rc8-1
>>> Backport based on linux-2.6-allstable.git v3.1-rc8
>>>
>>> Has anyone managed to use ar9390 in linux?
>>>
>>>
>>>
>>> ---------- Forwarded message ----------
>>> From: wireless newbie <[email protected]>
>>> Date: 2011/11/11
>>> Subject: ar9390 Support for master mode?
>>> To: [email protected]
>>>
>>>
>>> Hi all,
>>>
>>> Has any one used ar9390 based devices as an AP? I'm trying, but all
>>> fails when I load hostapd:
>>>
>>> ath9k 0000:01:00.0: mon.wlan0: Features changed: 0x00004800 -> 0x00004000
>>> ath: Unable to reset hardware; reset status -5 (freq 2412 MHz)
>>> Could not set interface mon.wlan0 flags: Input/output error
>>> nl80211: Failed to set interface wlan0 into AP mode
>>> nl80211 driver initialization failed.
>>> ELOOP: remaining socket: sock=8 eloop_data=0x10219770
>>> user_data=0x10219d18 handler=0x1002b8c0
>>> ELOOP: remaining socket: sock=10 eloop_data=0x1021c0b8 user_data=(nil)
>>> handler=0x100353e0
>>>
>>> With iw, it seems that AP is part of the capabilities:
>>>
>>> iw phy phy0 info
>>>
>>> Wiphy phy0
>>> ? ? ? ?Band 1:
>>> ? ? ? ? ? ? ? ?Capabilities: 0x11ef
>>> ? ? ? ? ? ? ? ? ? ? ? ?RX LDPC
>>> ? ? ? ? ? ? ? ? ? ? ? ?HT20/HT40
>>> ? ? ? ? ? ? ? ? ? ? ? ?SM Power Save disabled
>>> ? ? ? ? ? ? ? ? ? ? ? ?RX HT20 SGI
>>> ? ? ? ? ? ? ? ? ? ? ? ?RX HT40 SGI
>>> ? ? ? ? ? ? ? ? ? ? ? ?TX STBC
>>> ? ? ? ? ? ? ? ? ? ? ? ?RX STBC 1-stream
>>> ? ? ? ? ? ? ? ? ? ? ? ?Max AMSDU length: 3839 bytes
>>> ? ? ? ? ? ? ? ? ? ? ? ?DSSS/CCK HT40
>>> ? ? ? ? ? ? ? ?Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
>>> ? ? ? ? ? ? ? ?Minimum RX AMPDU time spacing: 8 usec (0x06)
>>> ? ? ? ? ? ? ? ?HT TX/RX MCS rate indexes supported: 0-23
>>> ? ? ? ? ? ? ? ?Frequencies:
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 2412 MHz [1] (17.0 dBm)
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 2417 MHz [2] (17.0 dBm)
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 2422 MHz [3] (17.0 dBm)
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 2427 MHz [4] (17.0 dBm)
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 2432 MHz [5] (17.0 dBm)
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 2437 MHz [6] (17.0 dBm)
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 2442 MHz [7] (17.0 dBm)
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 2447 MHz [8] (17.0 dBm)
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 2452 MHz [9] (17.0 dBm)
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 2457 MHz [10] (17.0 dBm)
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 2462 MHz [11] (17.0 dBm)
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 2467 MHz [12] (disabled)
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 2472 MHz [13] (disabled)
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 2484 MHz [14] (disabled)
>>> ? ? ? ? ? ? ? ?Bitrates (non-HT):
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 1.0 Mbps
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 2.0 Mbps (short preamble supported)
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 5.5 Mbps (short preamble supported)
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 11.0 Mbps (short preamble supported)
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 6.0 Mbps
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 9.0 Mbps
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 12.0 Mbps
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 18.0 Mbps
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 24.0 Mbps
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 36.0 Mbps
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 48.0 Mbps
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 54.0 Mbps
>>> ? ? ? ?Band 2:
>>> ? ? ? ? ? ? ? ?Capabilities: 0x11ef
>>> ? ? ? ? ? ? ? ? ? ? ? ?RX LDPC
>>> ? ? ? ? ? ? ? ? ? ? ? ?HT20/HT40
>>> ? ? ? ? ? ? ? ? ? ? ? ?SM Power Save disabled
>>> ? ? ? ? ? ? ? ? ? ? ? ?RX HT20 SGI
>>> ? ? ? ? ? ? ? ? ? ? ? ?RX HT40 SGI
>>> ? ? ? ? ? ? ? ? ? ? ? ?TX STBC
>>> ? ? ? ? ? ? ? ? ? ? ? ?RX STBC 1-stream
>>> ? ? ? ? ? ? ? ? ? ? ? ?Max AMSDU length: 3839 bytes
>>> ? ? ? ? ? ? ? ? ? ? ? ?DSSS/CCK HT40
>>> ? ? ? ? ? ? ? ?Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
>>> ? ? ? ? ? ? ? ?Minimum RX AMPDU time spacing: 8 usec (0x06)
>>> ? ? ? ? ? ? ? ?HT TX/RX MCS rate indexes supported: 0-23
>>> ? ? ? ? ? ? ? ?Frequencies:
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 5180 MHz [36] (18.0 dBm) (passive scanning, no IBSS)
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 5200 MHz [40] (18.0 dBm) (passive scanning, no IBSS)
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 5220 MHz [44] (18.0 dBm) (passive scanning, no IBSS)
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 5240 MHz [48] (18.0 dBm) (passive scanning, no IBSS)
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 5260 MHz [52] (disabled)
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 5280 MHz [56] (disabled)
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 5300 MHz [60] (disabled)
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 5320 MHz [64] (disabled)
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 5500 MHz [100] (disabled)
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 5520 MHz [104] (disabled)
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 5540 MHz [108] (disabled)
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 5560 MHz [112] (disabled)
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 5580 MHz [116] (disabled)
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 5600 MHz [120] (disabled)
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 5620 MHz [124] (disabled)
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 5640 MHz [128] (disabled)
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 5660 MHz [132] (disabled)
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 5680 MHz [136] (disabled)
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 5700 MHz [140] (disabled)
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 5745 MHz [149] (18.0 dBm) (passive scanning, no IBSS)
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 5765 MHz [153] (18.0 dBm) (passive scanning, no IBSS)
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 5785 MHz [157] (18.0 dBm) (passive scanning, no IBSS)
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 5805 MHz [161] (18.0 dBm) (passive scanning, no IBSS)
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 5825 MHz [165] (18.0 dBm) (passive scanning, no IBSS)
>>> ? ? ? ? ? ? ? ?Bitrates (non-HT):
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 6.0 Mbps
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 9.0 Mbps
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 12.0 Mbps
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 18.0 Mbps
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 24.0 Mbps
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 36.0 Mbps
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 48.0 Mbps
>>> ? ? ? ? ? ? ? ? ? ? ? ?* 54.0 Mbps
>>> ? ? ? ?max # scan SSIDs: 4
>>> ? ? ? ?max scan IEs length: 2257 bytes
>>> ? ? ? ?Coverage class: 0 (up to 0m)
>>> ? ? ? ?Available Antennas: TX 0 RX 0
>>> ? ? ? ?Supported interface modes:
>>> ? ? ? ? ? ? ? ? * IBSS
>>> ? ? ? ? ? ? ? ? * managed
>>> ? ? ? ? ? ? ? ? * AP
>>> ? ? ? ? ? ? ? ? * AP/VLAN
>>> ? ? ? ? ? ? ? ? * WDS
>>> ? ? ? ? ? ? ? ? * monitor
>>> ? ? ? ? ? ? ? ? * mesh point
>>> ? ? ? ? ? ? ? ? * P2P-client
>>> ? ? ? ? ? ? ? ? * P2P-GO
>>> ? ? ? ?Supported commands:
>>> ? ? ? ? ? ? ? ? * new_interface
>>> ? ? ? ? ? ? ? ? * set_interface
>>> ? ? ? ? ? ? ? ? * new_key
>>> ? ? ? ? ? ? ? ? * new_beacon
>>> ? ? ? ? ? ? ? ? * new_station
>>> ? ? ? ? ? ? ? ? * new_mpath
>>> ? ? ? ? ? ? ? ? * set_mesh_params
>>> ? ? ? ? ? ? ? ? * set_bss
>>> ? ? ? ? ? ? ? ? * authenticate
>>> ? ? ? ? ? ? ? ? * associate
>>> ? ? ? ? ? ? ? ? * deauthenticate
>>> ? ? ? ? ? ? ? ? * disassociate
>>> ? ? ? ? ? ? ? ? * join_ibss
>>> ? ? ? ? ? ? ? ? * join_mesh
>>> ? ? ? ? ? ? ? ? * remain_on_channel
>>> ? ? ? ? ? ? ? ? * set_tx_bitrate_mask
>>> ? ? ? ? ? ? ? ? * action
>>> ? ? ? ? ? ? ? ? * frame_wait_cancel
>>> ? ? ? ? ? ? ? ? * set_wiphy_netns
>>> ? ? ? ? ? ? ? ? * set_channel
>>> ? ? ? ? ? ? ? ? * set_wds_peer
>>> ? ? ? ? ? ? ? ? * connect
>>> ? ? ? ? ? ? ? ? * disconnect
>>> ? ? ? ?Supported TX frame types:
>>> ? ? ? ? ? ? ? ? * IBSS: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050
>>> 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
>>> ? ? ? ? ? ? ? ? * managed: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050
>>> 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
>>> ? ? ? ? ? ? ? ? * AP: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050
>>> 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
>>> ? ? ? ? ? ? ? ? * AP/VLAN: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050
>>> 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
>>> ? ? ? ? ? ? ? ? * mesh point: 0x0000 0x0010 0x0020 0x0030 0x0040
>>> 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0
>>> 0x00f0
>>> ? ? ? ? ? ? ? ? * P2P-client: 0x0000 0x0010 0x0020 0x0030 0x0040
>>> 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0
>>> 0x00f0
>>> ? ? ? ? ? ? ? ? * P2P-GO: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050
>>> 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
>>> ? ? ? ?Supported RX frame types:
>>> ? ? ? ? ? ? ? ? * IBSS: 0x00d0
>>> ? ? ? ? ? ? ? ? * managed: 0x0040 0x00d0
>>> ? ? ? ? ? ? ? ? * AP: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0
>>> ? ? ? ? ? ? ? ? * AP/VLAN: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0
>>> ? ? ? ? ? ? ? ? * mesh point: 0x00b0 0x00c0 0x00d0
>>> ? ? ? ? ? ? ? ? * P2P-client: 0x0040 0x00d0
>>> ? ? ? ? ? ? ? ? * P2P-GO: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0
>>>
>>> Has anyone experienced something like this? Can this be related to my
>>> hostapd config, or is this driver issue?
>>>
>>> br, Sami
>>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
>> the body of a message to [email protected]
>> More majordomo info at ?http://vger.kernel.org/majordomo-info.html
>>
>
>
>
> --
> shafi
>
On Tue, Nov 15, 2011 at 3:27 PM, wireless newbie <[email protected]> wrote:
> That fix is already in place but it didn't help.
:( i don't have AR9390 now, let me see if i can recreate the issue
in AR9003 cards and help you out.
>
> 2011/11/15 Mohammed Shafi <[email protected]>:
>> On Tue, Nov 15, 2011 at 1:45 PM, wireless newbie <[email protected]> wrote:
>>> I tried (almost) bleeding edge compat wireless drivers (dated
>>> 1.11.2011) but the same problem persists. It turns out that the
>>> problem is in AGC calibration in function ar9003_hw_init_cal. It times
>>> out. This is what ath9k_hw_wait prints to log:
>>>
>>> ath: timeout (100000 us) on reg 0xa2c4: 0x00158dd9 & 0x00000001 != 0x00000000
>>
>> a similar problem addressed by
>> http://permalink.gmane.org/gmane.linux.kernel.wireless.general/78758
>> and this fix is there in bleeding edge compat(today). did it help?
>>
>>>
>>> Is there anyone who has so much knowledge that he/she could verify if
>>> those values make sense with this chip (ar9390)? I would like to rule
>>> out the possibility that the driver is polling a bit in a wrong
>>> register. Or could it be that the timeout value needs to be extended?
>>>
>>> Thanks.
>>>
>>> 2011/11/14 wireless newbie <[email protected]>:
>>>> Ok, this doesn't seem to interest anyone in the wireless list.
>>>> Hopefully someone cares to respond from the ath9k list..
>>>>
>>>> I experience this problem with station mode too. I get
>>>>
>>>> ath: Unable to reset hardware; reset status -5 (freq 2412 MHz)
>>>> Could not set interface wlan0 flags: Input/output error
>>>> Could not set interface 'wlan0' UP
>>>>
>>>> when starting wpa_supplicant. Could it be that ar9390 isn't really
>>>> supported by ath9k driver? I have quite recent compat wireless drivers
>>>> in use:
>>>>
>>>> Compat-wireless backport release: compat-wireless-v3.1-rc8-1
>>>> Backport based on linux-2.6-allstable.git v3.1-rc8
>>>>
>>>> Has anyone managed to use ar9390 in linux?
>>>>
>>>>
>>>>
>>>> ---------- Forwarded message ----------
>>>> From: wireless newbie <[email protected]>
>>>> Date: 2011/11/11
>>>> Subject: ar9390 Support for master mode?
>>>> To: [email protected]
>>>>
>>>>
>>>> Hi all,
>>>>
>>>> Has any one used ar9390 based devices as an AP? I'm trying, but all
>>>> fails when I load hostapd:
>>>>
>>>> ath9k 0000:01:00.0: mon.wlan0: Features changed: 0x00004800 -> 0x00004000
>>>> ath: Unable to reset hardware; reset status -5 (freq 2412 MHz)
>>>> Could not set interface mon.wlan0 flags: Input/output error
>>>> nl80211: Failed to set interface wlan0 into AP mode
>>>> nl80211 driver initialization failed.
>>>> ELOOP: remaining socket: sock=8 eloop_data=0x10219770
>>>> user_data=0x10219d18 handler=0x1002b8c0
>>>> ELOOP: remaining socket: sock=10 eloop_data=0x1021c0b8 user_data=(nil)
>>>> handler=0x100353e0
>>>>
>>>> With iw, it seems that AP is part of the capabilities:
>>>>
>>>> iw phy phy0 info
>>>>
>>>> Wiphy phy0
>>>> ? ? ? ?Band 1:
>>>> ? ? ? ? ? ? ? ?Capabilities: 0x11ef
>>>> ? ? ? ? ? ? ? ? ? ? ? ?RX LDPC
>>>> ? ? ? ? ? ? ? ? ? ? ? ?HT20/HT40
>>>> ? ? ? ? ? ? ? ? ? ? ? ?SM Power Save disabled
>>>> ? ? ? ? ? ? ? ? ? ? ? ?RX HT20 SGI
>>>> ? ? ? ? ? ? ? ? ? ? ? ?RX HT40 SGI
>>>> ? ? ? ? ? ? ? ? ? ? ? ?TX STBC
>>>> ? ? ? ? ? ? ? ? ? ? ? ?RX STBC 1-stream
>>>> ? ? ? ? ? ? ? ? ? ? ? ?Max AMSDU length: 3839 bytes
>>>> ? ? ? ? ? ? ? ? ? ? ? ?DSSS/CCK HT40
>>>> ? ? ? ? ? ? ? ?Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
>>>> ? ? ? ? ? ? ? ?Minimum RX AMPDU time spacing: 8 usec (0x06)
>>>> ? ? ? ? ? ? ? ?HT TX/RX MCS rate indexes supported: 0-23
>>>> ? ? ? ? ? ? ? ?Frequencies:
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 2412 MHz [1] (17.0 dBm)
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 2417 MHz [2] (17.0 dBm)
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 2422 MHz [3] (17.0 dBm)
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 2427 MHz [4] (17.0 dBm)
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 2432 MHz [5] (17.0 dBm)
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 2437 MHz [6] (17.0 dBm)
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 2442 MHz [7] (17.0 dBm)
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 2447 MHz [8] (17.0 dBm)
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 2452 MHz [9] (17.0 dBm)
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 2457 MHz [10] (17.0 dBm)
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 2462 MHz [11] (17.0 dBm)
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 2467 MHz [12] (disabled)
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 2472 MHz [13] (disabled)
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 2484 MHz [14] (disabled)
>>>> ? ? ? ? ? ? ? ?Bitrates (non-HT):
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 1.0 Mbps
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 2.0 Mbps (short preamble supported)
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 5.5 Mbps (short preamble supported)
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 11.0 Mbps (short preamble supported)
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 6.0 Mbps
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 9.0 Mbps
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 12.0 Mbps
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 18.0 Mbps
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 24.0 Mbps
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 36.0 Mbps
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 48.0 Mbps
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 54.0 Mbps
>>>> ? ? ? ?Band 2:
>>>> ? ? ? ? ? ? ? ?Capabilities: 0x11ef
>>>> ? ? ? ? ? ? ? ? ? ? ? ?RX LDPC
>>>> ? ? ? ? ? ? ? ? ? ? ? ?HT20/HT40
>>>> ? ? ? ? ? ? ? ? ? ? ? ?SM Power Save disabled
>>>> ? ? ? ? ? ? ? ? ? ? ? ?RX HT20 SGI
>>>> ? ? ? ? ? ? ? ? ? ? ? ?RX HT40 SGI
>>>> ? ? ? ? ? ? ? ? ? ? ? ?TX STBC
>>>> ? ? ? ? ? ? ? ? ? ? ? ?RX STBC 1-stream
>>>> ? ? ? ? ? ? ? ? ? ? ? ?Max AMSDU length: 3839 bytes
>>>> ? ? ? ? ? ? ? ? ? ? ? ?DSSS/CCK HT40
>>>> ? ? ? ? ? ? ? ?Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
>>>> ? ? ? ? ? ? ? ?Minimum RX AMPDU time spacing: 8 usec (0x06)
>>>> ? ? ? ? ? ? ? ?HT TX/RX MCS rate indexes supported: 0-23
>>>> ? ? ? ? ? ? ? ?Frequencies:
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 5180 MHz [36] (18.0 dBm) (passive scanning, no IBSS)
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 5200 MHz [40] (18.0 dBm) (passive scanning, no IBSS)
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 5220 MHz [44] (18.0 dBm) (passive scanning, no IBSS)
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 5240 MHz [48] (18.0 dBm) (passive scanning, no IBSS)
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 5260 MHz [52] (disabled)
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 5280 MHz [56] (disabled)
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 5300 MHz [60] (disabled)
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 5320 MHz [64] (disabled)
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 5500 MHz [100] (disabled)
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 5520 MHz [104] (disabled)
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 5540 MHz [108] (disabled)
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 5560 MHz [112] (disabled)
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 5580 MHz [116] (disabled)
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 5600 MHz [120] (disabled)
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 5620 MHz [124] (disabled)
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 5640 MHz [128] (disabled)
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 5660 MHz [132] (disabled)
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 5680 MHz [136] (disabled)
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 5700 MHz [140] (disabled)
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 5745 MHz [149] (18.0 dBm) (passive scanning, no IBSS)
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 5765 MHz [153] (18.0 dBm) (passive scanning, no IBSS)
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 5785 MHz [157] (18.0 dBm) (passive scanning, no IBSS)
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 5805 MHz [161] (18.0 dBm) (passive scanning, no IBSS)
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 5825 MHz [165] (18.0 dBm) (passive scanning, no IBSS)
>>>> ? ? ? ? ? ? ? ?Bitrates (non-HT):
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 6.0 Mbps
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 9.0 Mbps
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 12.0 Mbps
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 18.0 Mbps
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 24.0 Mbps
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 36.0 Mbps
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 48.0 Mbps
>>>> ? ? ? ? ? ? ? ? ? ? ? ?* 54.0 Mbps
>>>> ? ? ? ?max # scan SSIDs: 4
>>>> ? ? ? ?max scan IEs length: 2257 bytes
>>>> ? ? ? ?Coverage class: 0 (up to 0m)
>>>> ? ? ? ?Available Antennas: TX 0 RX 0
>>>> ? ? ? ?Supported interface modes:
>>>> ? ? ? ? ? ? ? ? * IBSS
>>>> ? ? ? ? ? ? ? ? * managed
>>>> ? ? ? ? ? ? ? ? * AP
>>>> ? ? ? ? ? ? ? ? * AP/VLAN
>>>> ? ? ? ? ? ? ? ? * WDS
>>>> ? ? ? ? ? ? ? ? * monitor
>>>> ? ? ? ? ? ? ? ? * mesh point
>>>> ? ? ? ? ? ? ? ? * P2P-client
>>>> ? ? ? ? ? ? ? ? * P2P-GO
>>>> ? ? ? ?Supported commands:
>>>> ? ? ? ? ? ? ? ? * new_interface
>>>> ? ? ? ? ? ? ? ? * set_interface
>>>> ? ? ? ? ? ? ? ? * new_key
>>>> ? ? ? ? ? ? ? ? * new_beacon
>>>> ? ? ? ? ? ? ? ? * new_station
>>>> ? ? ? ? ? ? ? ? * new_mpath
>>>> ? ? ? ? ? ? ? ? * set_mesh_params
>>>> ? ? ? ? ? ? ? ? * set_bss
>>>> ? ? ? ? ? ? ? ? * authenticate
>>>> ? ? ? ? ? ? ? ? * associate
>>>> ? ? ? ? ? ? ? ? * deauthenticate
>>>> ? ? ? ? ? ? ? ? * disassociate
>>>> ? ? ? ? ? ? ? ? * join_ibss
>>>> ? ? ? ? ? ? ? ? * join_mesh
>>>> ? ? ? ? ? ? ? ? * remain_on_channel
>>>> ? ? ? ? ? ? ? ? * set_tx_bitrate_mask
>>>> ? ? ? ? ? ? ? ? * action
>>>> ? ? ? ? ? ? ? ? * frame_wait_cancel
>>>> ? ? ? ? ? ? ? ? * set_wiphy_netns
>>>> ? ? ? ? ? ? ? ? * set_channel
>>>> ? ? ? ? ? ? ? ? * set_wds_peer
>>>> ? ? ? ? ? ? ? ? * connect
>>>> ? ? ? ? ? ? ? ? * disconnect
>>>> ? ? ? ?Supported TX frame types:
>>>> ? ? ? ? ? ? ? ? * IBSS: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050
>>>> 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
>>>> ? ? ? ? ? ? ? ? * managed: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050
>>>> 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
>>>> ? ? ? ? ? ? ? ? * AP: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050
>>>> 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
>>>> ? ? ? ? ? ? ? ? * AP/VLAN: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050
>>>> 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
>>>> ? ? ? ? ? ? ? ? * mesh point: 0x0000 0x0010 0x0020 0x0030 0x0040
>>>> 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0
>>>> 0x00f0
>>>> ? ? ? ? ? ? ? ? * P2P-client: 0x0000 0x0010 0x0020 0x0030 0x0040
>>>> 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0
>>>> 0x00f0
>>>> ? ? ? ? ? ? ? ? * P2P-GO: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050
>>>> 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
>>>> ? ? ? ?Supported RX frame types:
>>>> ? ? ? ? ? ? ? ? * IBSS: 0x00d0
>>>> ? ? ? ? ? ? ? ? * managed: 0x0040 0x00d0
>>>> ? ? ? ? ? ? ? ? * AP: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0
>>>> ? ? ? ? ? ? ? ? * AP/VLAN: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0
>>>> ? ? ? ? ? ? ? ? * mesh point: 0x00b0 0x00c0 0x00d0
>>>> ? ? ? ? ? ? ? ? * P2P-client: 0x0040 0x00d0
>>>> ? ? ? ? ? ? ? ? * P2P-GO: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0
>>>>
>>>> Has anyone experienced something like this? Can this be related to my
>>>> hostapd config, or is this driver issue?
>>>>
>>>> br, Sami
>>>>
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
>>> the body of a message to [email protected]
>>> More majordomo info at ?http://vger.kernel.org/majordomo-info.html
>>>
>>
>>
>>
>> --
>> shafi
>>
>
--
shafi
On Tue, 2011-11-15 at 16:05 +0530, Mohammed Shafi wrote:
> On Tue, Nov 15, 2011 at 3:27 PM, wireless newbie <[email protected]> wrote:
> > That fix is already in place but it didn't help.
>
> :( i don't have AR9390 now, let me see if i can recreate the issue
> in AR9003 cards and help you out.
Guys! Both of you, trim your quotes please :)
johannes
I tried (almost) bleeding edge compat wireless drivers (dated
1.11.2011) but the same problem persists. It turns out that the
problem is in AGC calibration in function ar9003_hw_init_cal. It times
out. This is what ath9k_hw_wait prints to log:
ath: timeout (100000 us) on reg 0xa2c4: 0x00158dd9 & 0x00000001 != 0x00000000
Is there anyone who has so much knowledge that he/she could verify if
those values make sense with this chip (ar9390)? I would like to rule
out the possibility that the driver is polling a bit in a wrong
register. Or could it be that the timeout value needs to be extended?
Thanks.
2011/11/14 wireless newbie <[email protected]>:
> Ok, this doesn't seem to interest anyone in the wireless list.
> Hopefully someone cares to respond from the ath9k list..
>
> I experience this problem with station mode too. I get
>
> ath: Unable to reset hardware; reset status -5 (freq 2412 MHz)
> Could not set interface wlan0 flags: Input/output error
> Could not set interface 'wlan0' UP
>
> when starting wpa_supplicant. Could it be that ar9390 isn't really
> supported by ath9k driver? I have quite recent compat wireless drivers
> in use:
>
> Compat-wireless backport release: compat-wireless-v3.1-rc8-1
> Backport based on linux-2.6-allstable.git v3.1-rc8
>
> Has anyone managed to use ar9390 in linux?
>
>
>
> ---------- Forwarded message ----------
> From: wireless newbie <[email protected]>
> Date: 2011/11/11
> Subject: ar9390 Support for master mode?
> To: [email protected]
>
>
> Hi all,
>
> Has any one used ar9390 based devices as an AP? I'm trying, but all
> fails when I load hostapd:
>
> ath9k 0000:01:00.0: mon.wlan0: Features changed: 0x00004800 -> 0x00004000
> ath: Unable to reset hardware; reset status -5 (freq 2412 MHz)
> Could not set interface mon.wlan0 flags: Input/output error
> nl80211: Failed to set interface wlan0 into AP mode
> nl80211 driver initialization failed.
> ELOOP: remaining socket: sock=8 eloop_data=0x10219770
> user_data=0x10219d18 handler=0x1002b8c0
> ELOOP: remaining socket: sock=10 eloop_data=0x1021c0b8 user_data=(nil)
> handler=0x100353e0
>
> With iw, it seems that AP is part of the capabilities:
>
> iw phy phy0 info
>
> Wiphy phy0
> ? ? ? ?Band 1:
> ? ? ? ? ? ? ? ?Capabilities: 0x11ef
> ? ? ? ? ? ? ? ? ? ? ? ?RX LDPC
> ? ? ? ? ? ? ? ? ? ? ? ?HT20/HT40
> ? ? ? ? ? ? ? ? ? ? ? ?SM Power Save disabled
> ? ? ? ? ? ? ? ? ? ? ? ?RX HT20 SGI
> ? ? ? ? ? ? ? ? ? ? ? ?RX HT40 SGI
> ? ? ? ? ? ? ? ? ? ? ? ?TX STBC
> ? ? ? ? ? ? ? ? ? ? ? ?RX STBC 1-stream
> ? ? ? ? ? ? ? ? ? ? ? ?Max AMSDU length: 3839 bytes
> ? ? ? ? ? ? ? ? ? ? ? ?DSSS/CCK HT40
> ? ? ? ? ? ? ? ?Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
> ? ? ? ? ? ? ? ?Minimum RX AMPDU time spacing: 8 usec (0x06)
> ? ? ? ? ? ? ? ?HT TX/RX MCS rate indexes supported: 0-23
> ? ? ? ? ? ? ? ?Frequencies:
> ? ? ? ? ? ? ? ? ? ? ? ?* 2412 MHz [1] (17.0 dBm)
> ? ? ? ? ? ? ? ? ? ? ? ?* 2417 MHz [2] (17.0 dBm)
> ? ? ? ? ? ? ? ? ? ? ? ?* 2422 MHz [3] (17.0 dBm)
> ? ? ? ? ? ? ? ? ? ? ? ?* 2427 MHz [4] (17.0 dBm)
> ? ? ? ? ? ? ? ? ? ? ? ?* 2432 MHz [5] (17.0 dBm)
> ? ? ? ? ? ? ? ? ? ? ? ?* 2437 MHz [6] (17.0 dBm)
> ? ? ? ? ? ? ? ? ? ? ? ?* 2442 MHz [7] (17.0 dBm)
> ? ? ? ? ? ? ? ? ? ? ? ?* 2447 MHz [8] (17.0 dBm)
> ? ? ? ? ? ? ? ? ? ? ? ?* 2452 MHz [9] (17.0 dBm)
> ? ? ? ? ? ? ? ? ? ? ? ?* 2457 MHz [10] (17.0 dBm)
> ? ? ? ? ? ? ? ? ? ? ? ?* 2462 MHz [11] (17.0 dBm)
> ? ? ? ? ? ? ? ? ? ? ? ?* 2467 MHz [12] (disabled)
> ? ? ? ? ? ? ? ? ? ? ? ?* 2472 MHz [13] (disabled)
> ? ? ? ? ? ? ? ? ? ? ? ?* 2484 MHz [14] (disabled)
> ? ? ? ? ? ? ? ?Bitrates (non-HT):
> ? ? ? ? ? ? ? ? ? ? ? ?* 1.0 Mbps
> ? ? ? ? ? ? ? ? ? ? ? ?* 2.0 Mbps (short preamble supported)
> ? ? ? ? ? ? ? ? ? ? ? ?* 5.5 Mbps (short preamble supported)
> ? ? ? ? ? ? ? ? ? ? ? ?* 11.0 Mbps (short preamble supported)
> ? ? ? ? ? ? ? ? ? ? ? ?* 6.0 Mbps
> ? ? ? ? ? ? ? ? ? ? ? ?* 9.0 Mbps
> ? ? ? ? ? ? ? ? ? ? ? ?* 12.0 Mbps
> ? ? ? ? ? ? ? ? ? ? ? ?* 18.0 Mbps
> ? ? ? ? ? ? ? ? ? ? ? ?* 24.0 Mbps
> ? ? ? ? ? ? ? ? ? ? ? ?* 36.0 Mbps
> ? ? ? ? ? ? ? ? ? ? ? ?* 48.0 Mbps
> ? ? ? ? ? ? ? ? ? ? ? ?* 54.0 Mbps
> ? ? ? ?Band 2:
> ? ? ? ? ? ? ? ?Capabilities: 0x11ef
> ? ? ? ? ? ? ? ? ? ? ? ?RX LDPC
> ? ? ? ? ? ? ? ? ? ? ? ?HT20/HT40
> ? ? ? ? ? ? ? ? ? ? ? ?SM Power Save disabled
> ? ? ? ? ? ? ? ? ? ? ? ?RX HT20 SGI
> ? ? ? ? ? ? ? ? ? ? ? ?RX HT40 SGI
> ? ? ? ? ? ? ? ? ? ? ? ?TX STBC
> ? ? ? ? ? ? ? ? ? ? ? ?RX STBC 1-stream
> ? ? ? ? ? ? ? ? ? ? ? ?Max AMSDU length: 3839 bytes
> ? ? ? ? ? ? ? ? ? ? ? ?DSSS/CCK HT40
> ? ? ? ? ? ? ? ?Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
> ? ? ? ? ? ? ? ?Minimum RX AMPDU time spacing: 8 usec (0x06)
> ? ? ? ? ? ? ? ?HT TX/RX MCS rate indexes supported: 0-23
> ? ? ? ? ? ? ? ?Frequencies:
> ? ? ? ? ? ? ? ? ? ? ? ?* 5180 MHz [36] (18.0 dBm) (passive scanning, no IBSS)
> ? ? ? ? ? ? ? ? ? ? ? ?* 5200 MHz [40] (18.0 dBm) (passive scanning, no IBSS)
> ? ? ? ? ? ? ? ? ? ? ? ?* 5220 MHz [44] (18.0 dBm) (passive scanning, no IBSS)
> ? ? ? ? ? ? ? ? ? ? ? ?* 5240 MHz [48] (18.0 dBm) (passive scanning, no IBSS)
> ? ? ? ? ? ? ? ? ? ? ? ?* 5260 MHz [52] (disabled)
> ? ? ? ? ? ? ? ? ? ? ? ?* 5280 MHz [56] (disabled)
> ? ? ? ? ? ? ? ? ? ? ? ?* 5300 MHz [60] (disabled)
> ? ? ? ? ? ? ? ? ? ? ? ?* 5320 MHz [64] (disabled)
> ? ? ? ? ? ? ? ? ? ? ? ?* 5500 MHz [100] (disabled)
> ? ? ? ? ? ? ? ? ? ? ? ?* 5520 MHz [104] (disabled)
> ? ? ? ? ? ? ? ? ? ? ? ?* 5540 MHz [108] (disabled)
> ? ? ? ? ? ? ? ? ? ? ? ?* 5560 MHz [112] (disabled)
> ? ? ? ? ? ? ? ? ? ? ? ?* 5580 MHz [116] (disabled)
> ? ? ? ? ? ? ? ? ? ? ? ?* 5600 MHz [120] (disabled)
> ? ? ? ? ? ? ? ? ? ? ? ?* 5620 MHz [124] (disabled)
> ? ? ? ? ? ? ? ? ? ? ? ?* 5640 MHz [128] (disabled)
> ? ? ? ? ? ? ? ? ? ? ? ?* 5660 MHz [132] (disabled)
> ? ? ? ? ? ? ? ? ? ? ? ?* 5680 MHz [136] (disabled)
> ? ? ? ? ? ? ? ? ? ? ? ?* 5700 MHz [140] (disabled)
> ? ? ? ? ? ? ? ? ? ? ? ?* 5745 MHz [149] (18.0 dBm) (passive scanning, no IBSS)
> ? ? ? ? ? ? ? ? ? ? ? ?* 5765 MHz [153] (18.0 dBm) (passive scanning, no IBSS)
> ? ? ? ? ? ? ? ? ? ? ? ?* 5785 MHz [157] (18.0 dBm) (passive scanning, no IBSS)
> ? ? ? ? ? ? ? ? ? ? ? ?* 5805 MHz [161] (18.0 dBm) (passive scanning, no IBSS)
> ? ? ? ? ? ? ? ? ? ? ? ?* 5825 MHz [165] (18.0 dBm) (passive scanning, no IBSS)
> ? ? ? ? ? ? ? ?Bitrates (non-HT):
> ? ? ? ? ? ? ? ? ? ? ? ?* 6.0 Mbps
> ? ? ? ? ? ? ? ? ? ? ? ?* 9.0 Mbps
> ? ? ? ? ? ? ? ? ? ? ? ?* 12.0 Mbps
> ? ? ? ? ? ? ? ? ? ? ? ?* 18.0 Mbps
> ? ? ? ? ? ? ? ? ? ? ? ?* 24.0 Mbps
> ? ? ? ? ? ? ? ? ? ? ? ?* 36.0 Mbps
> ? ? ? ? ? ? ? ? ? ? ? ?* 48.0 Mbps
> ? ? ? ? ? ? ? ? ? ? ? ?* 54.0 Mbps
> ? ? ? ?max # scan SSIDs: 4
> ? ? ? ?max scan IEs length: 2257 bytes
> ? ? ? ?Coverage class: 0 (up to 0m)
> ? ? ? ?Available Antennas: TX 0 RX 0
> ? ? ? ?Supported interface modes:
> ? ? ? ? ? ? ? ? * IBSS
> ? ? ? ? ? ? ? ? * managed
> ? ? ? ? ? ? ? ? * AP
> ? ? ? ? ? ? ? ? * AP/VLAN
> ? ? ? ? ? ? ? ? * WDS
> ? ? ? ? ? ? ? ? * monitor
> ? ? ? ? ? ? ? ? * mesh point
> ? ? ? ? ? ? ? ? * P2P-client
> ? ? ? ? ? ? ? ? * P2P-GO
> ? ? ? ?Supported commands:
> ? ? ? ? ? ? ? ? * new_interface
> ? ? ? ? ? ? ? ? * set_interface
> ? ? ? ? ? ? ? ? * new_key
> ? ? ? ? ? ? ? ? * new_beacon
> ? ? ? ? ? ? ? ? * new_station
> ? ? ? ? ? ? ? ? * new_mpath
> ? ? ? ? ? ? ? ? * set_mesh_params
> ? ? ? ? ? ? ? ? * set_bss
> ? ? ? ? ? ? ? ? * authenticate
> ? ? ? ? ? ? ? ? * associate
> ? ? ? ? ? ? ? ? * deauthenticate
> ? ? ? ? ? ? ? ? * disassociate
> ? ? ? ? ? ? ? ? * join_ibss
> ? ? ? ? ? ? ? ? * join_mesh
> ? ? ? ? ? ? ? ? * remain_on_channel
> ? ? ? ? ? ? ? ? * set_tx_bitrate_mask
> ? ? ? ? ? ? ? ? * action
> ? ? ? ? ? ? ? ? * frame_wait_cancel
> ? ? ? ? ? ? ? ? * set_wiphy_netns
> ? ? ? ? ? ? ? ? * set_channel
> ? ? ? ? ? ? ? ? * set_wds_peer
> ? ? ? ? ? ? ? ? * connect
> ? ? ? ? ? ? ? ? * disconnect
> ? ? ? ?Supported TX frame types:
> ? ? ? ? ? ? ? ? * IBSS: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050
> 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
> ? ? ? ? ? ? ? ? * managed: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050
> 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
> ? ? ? ? ? ? ? ? * AP: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050
> 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
> ? ? ? ? ? ? ? ? * AP/VLAN: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050
> 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
> ? ? ? ? ? ? ? ? * mesh point: 0x0000 0x0010 0x0020 0x0030 0x0040
> 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0
> 0x00f0
> ? ? ? ? ? ? ? ? * P2P-client: 0x0000 0x0010 0x0020 0x0030 0x0040
> 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0
> 0x00f0
> ? ? ? ? ? ? ? ? * P2P-GO: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050
> 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
> ? ? ? ?Supported RX frame types:
> ? ? ? ? ? ? ? ? * IBSS: 0x00d0
> ? ? ? ? ? ? ? ? * managed: 0x0040 0x00d0
> ? ? ? ? ? ? ? ? * AP: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0
> ? ? ? ? ? ? ? ? * AP/VLAN: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0
> ? ? ? ? ? ? ? ? * mesh point: 0x00b0 0x00c0 0x00d0
> ? ? ? ? ? ? ? ? * P2P-client: 0x0040 0x00d0
> ? ? ? ? ? ? ? ? * P2P-GO: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0
>
> Has anyone experienced something like this? Can this be related to my
> hostapd config, or is this driver issue?
>
> br, Sami
>
Thanks. I just compiled compat-wireless from yesterday, but the
behavior is still the same.
2011/11/15 Mohammed Shafi <[email protected]>:
> On Tue, Nov 15, 2011 at 3:27 PM, wireless newbie <[email protected]> wrote:
>> That fix is already in place but it didn't help.
>
> :( ?i don't have AR9390 now, let me see if ?i can recreate the issue
> in AR9003 cards and help you out.
>
>
On Tue, Nov 15, 2011 at 1:45 PM, wireless newbie <[email protected]> wrote:
> I tried (almost) bleeding edge compat wireless drivers (dated
> 1.11.2011) but the same problem persists. It turns out that the
> problem is in AGC calibration in function ar9003_hw_init_cal. It times
> out. This is what ath9k_hw_wait prints to log:
>
> ath: timeout (100000 us) on reg 0xa2c4: 0x00158dd9 & 0x00000001 != 0x00000000
a similar problem addressed by
http://permalink.gmane.org/gmane.linux.kernel.wireless.general/78758
and this fix is there in bleeding edge compat(today). did it help?
>
> Is there anyone who has so much knowledge that he/she could verify if
> those values make sense with this chip (ar9390)? I would like to rule
> out the possibility that the driver is polling a bit in a wrong
> register. Or could it be that the timeout value needs to be extended?
>
> Thanks.
>
> 2011/11/14 wireless newbie <[email protected]>:
>> Ok, this doesn't seem to interest anyone in the wireless list.
>> Hopefully someone cares to respond from the ath9k list..
>>
>> I experience this problem with station mode too. I get
>>
>> ath: Unable to reset hardware; reset status -5 (freq 2412 MHz)
>> Could not set interface wlan0 flags: Input/output error
>> Could not set interface 'wlan0' UP
>>
>> when starting wpa_supplicant. Could it be that ar9390 isn't really
>> supported by ath9k driver? I have quite recent compat wireless drivers
>> in use:
>>
>> Compat-wireless backport release: compat-wireless-v3.1-rc8-1
>> Backport based on linux-2.6-allstable.git v3.1-rc8
>>
>> Has anyone managed to use ar9390 in linux?
>>
>>
>>
>> ---------- Forwarded message ----------
>> From: wireless newbie <[email protected]>
>> Date: 2011/11/11
>> Subject: ar9390 Support for master mode?
>> To: [email protected]
>>
>>
>> Hi all,
>>
>> Has any one used ar9390 based devices as an AP? I'm trying, but all
>> fails when I load hostapd:
>>
>> ath9k 0000:01:00.0: mon.wlan0: Features changed: 0x00004800 -> 0x00004000
>> ath: Unable to reset hardware; reset status -5 (freq 2412 MHz)
>> Could not set interface mon.wlan0 flags: Input/output error
>> nl80211: Failed to set interface wlan0 into AP mode
>> nl80211 driver initialization failed.
>> ELOOP: remaining socket: sock=8 eloop_data=0x10219770
>> user_data=0x10219d18 handler=0x1002b8c0
>> ELOOP: remaining socket: sock=10 eloop_data=0x1021c0b8 user_data=(nil)
>> handler=0x100353e0
>>
>> With iw, it seems that AP is part of the capabilities:
>>
>> iw phy phy0 info
>>
>> Wiphy phy0
>> ? ? ? ?Band 1:
>> ? ? ? ? ? ? ? ?Capabilities: 0x11ef
>> ? ? ? ? ? ? ? ? ? ? ? ?RX LDPC
>> ? ? ? ? ? ? ? ? ? ? ? ?HT20/HT40
>> ? ? ? ? ? ? ? ? ? ? ? ?SM Power Save disabled
>> ? ? ? ? ? ? ? ? ? ? ? ?RX HT20 SGI
>> ? ? ? ? ? ? ? ? ? ? ? ?RX HT40 SGI
>> ? ? ? ? ? ? ? ? ? ? ? ?TX STBC
>> ? ? ? ? ? ? ? ? ? ? ? ?RX STBC 1-stream
>> ? ? ? ? ? ? ? ? ? ? ? ?Max AMSDU length: 3839 bytes
>> ? ? ? ? ? ? ? ? ? ? ? ?DSSS/CCK HT40
>> ? ? ? ? ? ? ? ?Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
>> ? ? ? ? ? ? ? ?Minimum RX AMPDU time spacing: 8 usec (0x06)
>> ? ? ? ? ? ? ? ?HT TX/RX MCS rate indexes supported: 0-23
>> ? ? ? ? ? ? ? ?Frequencies:
>> ? ? ? ? ? ? ? ? ? ? ? ?* 2412 MHz [1] (17.0 dBm)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 2417 MHz [2] (17.0 dBm)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 2422 MHz [3] (17.0 dBm)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 2427 MHz [4] (17.0 dBm)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 2432 MHz [5] (17.0 dBm)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 2437 MHz [6] (17.0 dBm)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 2442 MHz [7] (17.0 dBm)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 2447 MHz [8] (17.0 dBm)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 2452 MHz [9] (17.0 dBm)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 2457 MHz [10] (17.0 dBm)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 2462 MHz [11] (17.0 dBm)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 2467 MHz [12] (disabled)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 2472 MHz [13] (disabled)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 2484 MHz [14] (disabled)
>> ? ? ? ? ? ? ? ?Bitrates (non-HT):
>> ? ? ? ? ? ? ? ? ? ? ? ?* 1.0 Mbps
>> ? ? ? ? ? ? ? ? ? ? ? ?* 2.0 Mbps (short preamble supported)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 5.5 Mbps (short preamble supported)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 11.0 Mbps (short preamble supported)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 6.0 Mbps
>> ? ? ? ? ? ? ? ? ? ? ? ?* 9.0 Mbps
>> ? ? ? ? ? ? ? ? ? ? ? ?* 12.0 Mbps
>> ? ? ? ? ? ? ? ? ? ? ? ?* 18.0 Mbps
>> ? ? ? ? ? ? ? ? ? ? ? ?* 24.0 Mbps
>> ? ? ? ? ? ? ? ? ? ? ? ?* 36.0 Mbps
>> ? ? ? ? ? ? ? ? ? ? ? ?* 48.0 Mbps
>> ? ? ? ? ? ? ? ? ? ? ? ?* 54.0 Mbps
>> ? ? ? ?Band 2:
>> ? ? ? ? ? ? ? ?Capabilities: 0x11ef
>> ? ? ? ? ? ? ? ? ? ? ? ?RX LDPC
>> ? ? ? ? ? ? ? ? ? ? ? ?HT20/HT40
>> ? ? ? ? ? ? ? ? ? ? ? ?SM Power Save disabled
>> ? ? ? ? ? ? ? ? ? ? ? ?RX HT20 SGI
>> ? ? ? ? ? ? ? ? ? ? ? ?RX HT40 SGI
>> ? ? ? ? ? ? ? ? ? ? ? ?TX STBC
>> ? ? ? ? ? ? ? ? ? ? ? ?RX STBC 1-stream
>> ? ? ? ? ? ? ? ? ? ? ? ?Max AMSDU length: 3839 bytes
>> ? ? ? ? ? ? ? ? ? ? ? ?DSSS/CCK HT40
>> ? ? ? ? ? ? ? ?Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
>> ? ? ? ? ? ? ? ?Minimum RX AMPDU time spacing: 8 usec (0x06)
>> ? ? ? ? ? ? ? ?HT TX/RX MCS rate indexes supported: 0-23
>> ? ? ? ? ? ? ? ?Frequencies:
>> ? ? ? ? ? ? ? ? ? ? ? ?* 5180 MHz [36] (18.0 dBm) (passive scanning, no IBSS)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 5200 MHz [40] (18.0 dBm) (passive scanning, no IBSS)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 5220 MHz [44] (18.0 dBm) (passive scanning, no IBSS)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 5240 MHz [48] (18.0 dBm) (passive scanning, no IBSS)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 5260 MHz [52] (disabled)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 5280 MHz [56] (disabled)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 5300 MHz [60] (disabled)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 5320 MHz [64] (disabled)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 5500 MHz [100] (disabled)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 5520 MHz [104] (disabled)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 5540 MHz [108] (disabled)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 5560 MHz [112] (disabled)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 5580 MHz [116] (disabled)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 5600 MHz [120] (disabled)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 5620 MHz [124] (disabled)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 5640 MHz [128] (disabled)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 5660 MHz [132] (disabled)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 5680 MHz [136] (disabled)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 5700 MHz [140] (disabled)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 5745 MHz [149] (18.0 dBm) (passive scanning, no IBSS)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 5765 MHz [153] (18.0 dBm) (passive scanning, no IBSS)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 5785 MHz [157] (18.0 dBm) (passive scanning, no IBSS)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 5805 MHz [161] (18.0 dBm) (passive scanning, no IBSS)
>> ? ? ? ? ? ? ? ? ? ? ? ?* 5825 MHz [165] (18.0 dBm) (passive scanning, no IBSS)
>> ? ? ? ? ? ? ? ?Bitrates (non-HT):
>> ? ? ? ? ? ? ? ? ? ? ? ?* 6.0 Mbps
>> ? ? ? ? ? ? ? ? ? ? ? ?* 9.0 Mbps
>> ? ? ? ? ? ? ? ? ? ? ? ?* 12.0 Mbps
>> ? ? ? ? ? ? ? ? ? ? ? ?* 18.0 Mbps
>> ? ? ? ? ? ? ? ? ? ? ? ?* 24.0 Mbps
>> ? ? ? ? ? ? ? ? ? ? ? ?* 36.0 Mbps
>> ? ? ? ? ? ? ? ? ? ? ? ?* 48.0 Mbps
>> ? ? ? ? ? ? ? ? ? ? ? ?* 54.0 Mbps
>> ? ? ? ?max # scan SSIDs: 4
>> ? ? ? ?max scan IEs length: 2257 bytes
>> ? ? ? ?Coverage class: 0 (up to 0m)
>> ? ? ? ?Available Antennas: TX 0 RX 0
>> ? ? ? ?Supported interface modes:
>> ? ? ? ? ? ? ? ? * IBSS
>> ? ? ? ? ? ? ? ? * managed
>> ? ? ? ? ? ? ? ? * AP
>> ? ? ? ? ? ? ? ? * AP/VLAN
>> ? ? ? ? ? ? ? ? * WDS
>> ? ? ? ? ? ? ? ? * monitor
>> ? ? ? ? ? ? ? ? * mesh point
>> ? ? ? ? ? ? ? ? * P2P-client
>> ? ? ? ? ? ? ? ? * P2P-GO
>> ? ? ? ?Supported commands:
>> ? ? ? ? ? ? ? ? * new_interface
>> ? ? ? ? ? ? ? ? * set_interface
>> ? ? ? ? ? ? ? ? * new_key
>> ? ? ? ? ? ? ? ? * new_beacon
>> ? ? ? ? ? ? ? ? * new_station
>> ? ? ? ? ? ? ? ? * new_mpath
>> ? ? ? ? ? ? ? ? * set_mesh_params
>> ? ? ? ? ? ? ? ? * set_bss
>> ? ? ? ? ? ? ? ? * authenticate
>> ? ? ? ? ? ? ? ? * associate
>> ? ? ? ? ? ? ? ? * deauthenticate
>> ? ? ? ? ? ? ? ? * disassociate
>> ? ? ? ? ? ? ? ? * join_ibss
>> ? ? ? ? ? ? ? ? * join_mesh
>> ? ? ? ? ? ? ? ? * remain_on_channel
>> ? ? ? ? ? ? ? ? * set_tx_bitrate_mask
>> ? ? ? ? ? ? ? ? * action
>> ? ? ? ? ? ? ? ? * frame_wait_cancel
>> ? ? ? ? ? ? ? ? * set_wiphy_netns
>> ? ? ? ? ? ? ? ? * set_channel
>> ? ? ? ? ? ? ? ? * set_wds_peer
>> ? ? ? ? ? ? ? ? * connect
>> ? ? ? ? ? ? ? ? * disconnect
>> ? ? ? ?Supported TX frame types:
>> ? ? ? ? ? ? ? ? * IBSS: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050
>> 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
>> ? ? ? ? ? ? ? ? * managed: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050
>> 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
>> ? ? ? ? ? ? ? ? * AP: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050
>> 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
>> ? ? ? ? ? ? ? ? * AP/VLAN: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050
>> 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
>> ? ? ? ? ? ? ? ? * mesh point: 0x0000 0x0010 0x0020 0x0030 0x0040
>> 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0
>> 0x00f0
>> ? ? ? ? ? ? ? ? * P2P-client: 0x0000 0x0010 0x0020 0x0030 0x0040
>> 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0
>> 0x00f0
>> ? ? ? ? ? ? ? ? * P2P-GO: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050
>> 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
>> ? ? ? ?Supported RX frame types:
>> ? ? ? ? ? ? ? ? * IBSS: 0x00d0
>> ? ? ? ? ? ? ? ? * managed: 0x0040 0x00d0
>> ? ? ? ? ? ? ? ? * AP: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0
>> ? ? ? ? ? ? ? ? * AP/VLAN: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0
>> ? ? ? ? ? ? ? ? * mesh point: 0x00b0 0x00c0 0x00d0
>> ? ? ? ? ? ? ? ? * P2P-client: 0x0040 0x00d0
>> ? ? ? ? ? ? ? ? * P2P-GO: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0
>>
>> Has anyone experienced something like this? Can this be related to my
>> hostapd config, or is this driver issue?
>>
>> br, Sami
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to [email protected]
> More majordomo info at ?http://vger.kernel.org/majordomo-info.html
>
--
shafi