2012-03-02 12:40:39

by Johannes Berg

[permalink] [raw]
Subject: [PATCH] cfg80211/mac80211: report signal strength for mgmt frames

From: Johannes Berg <[email protected]>

Add the signal strength (in dBm only for now) to
frames that are received via nl80211's various
frame APIs.

Signed-off-by: Johannes Berg <[email protected]>
---
include/linux/nl80211.h | 6 ++++++
include/net/cfg80211.h | 8 +++++---
net/mac80211/rx.c | 13 +++++++++++--
net/wireless/mlme.c | 7 ++++---
net/wireless/nl80211.c | 9 +++++++--
net/wireless/nl80211.h | 3 ++-
6 files changed, 35 insertions(+), 11 deletions(-)

--- a/include/linux/nl80211.h 2012-03-02 13:27:36.000000000 +0100
+++ b/include/linux/nl80211.h 2012-03-02 13:31:24.000000000 +0100
@@ -1197,6 +1197,10 @@ enum nl80211_commands {
* @NL80211_ATTR_NOACK_MAP: This u16 bitmap contains the No Ack Policy of
* up to 16 TIDs.
*
+ * @NL80211_ATTR_RX_SIGNAL_DBM: signal strength in dBm (as a 32-bit int);
+ * this attribute is (depending on the driver capabilities) added to
+ * received frames indicated with %NL80211_CMD_FRAME.
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
@@ -1442,6 +1446,8 @@ enum nl80211_attrs {

NL80211_ATTR_NOACK_MAP,

+ NL80211_ATTR_RX_SIGNAL_DBM,
+
/* add attributes here, update the policy in nl80211.c */

__NL80211_ATTR_AFTER_LAST,
--- a/include/net/cfg80211.h 2012-03-02 13:28:11.000000000 +0100
+++ b/include/net/cfg80211.h 2012-03-02 13:33:02.000000000 +0100
@@ -3186,6 +3186,7 @@ void cfg80211_del_sta(struct net_device
* cfg80211_rx_mgmt - notification of received, unprocessed management frame
* @dev: network device
* @freq: Frequency on which the frame was received in MHz
+ * @sig_dbm: signal strength in mBm, or 0 if unknown
* @buf: Management frame (header + body)
* @len: length of the frame data
* @gfp: context flags
@@ -3198,8 +3199,8 @@ void cfg80211_del_sta(struct net_device
* This function is called whenever an Action frame is received for a station
* mode interface, but is not processed in kernel.
*/
-bool cfg80211_rx_mgmt(struct net_device *dev, int freq, const u8 *buf,
- size_t len, gfp_t gfp);
+bool cfg80211_rx_mgmt(struct net_device *dev, int freq, int sig_dbm,
+ const u8 *buf, size_t len, gfp_t gfp);

/**
* cfg80211_mgmt_tx_status - notification of TX status for management frame
@@ -3312,6 +3313,7 @@ void cfg80211_probe_status(struct net_de
* @frame: the frame
* @len: length of the frame
* @freq: frequency the frame was received on
+ * @sig_dbm: signal strength in mBm, or 0 if unknown
* @gfp: allocation flags
*
* Use this function to report to userspace when a beacon was
@@ -3320,7 +3322,7 @@ void cfg80211_probe_status(struct net_de
*/
void cfg80211_report_obss_beacon(struct wiphy *wiphy,
const u8 *frame, size_t len,
- int freq, gfp_t gfp);
+ int freq, int sig_dbm, gfp_t gfp);

/*
* cfg80211_can_beacon_sec_chan - test if ht40 on extension channel can be used
--- a/net/wireless/nl80211.c 2012-03-02 13:27:36.000000000 +0100
+++ b/net/wireless/nl80211.c 2012-03-02 13:32:44.000000000 +0100
@@ -7673,7 +7673,8 @@ bool nl80211_unexpected_4addr_frame(stru

int nl80211_send_mgmt(struct cfg80211_registered_device *rdev,
struct net_device *netdev, u32 nlpid,
- int freq, const u8 *buf, size_t len, gfp_t gfp)
+ int freq, int sig_dbm,
+ const u8 *buf, size_t len, gfp_t gfp)
{
struct sk_buff *msg;
void *hdr;
@@ -7691,6 +7692,8 @@ int nl80211_send_mgmt(struct cfg80211_re
NLA_PUT_U32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx);
NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex);
NLA_PUT_U32(msg, NL80211_ATTR_WIPHY_FREQ, freq);
+ if (sig_dbm)
+ NLA_PUT_U32(msg, NL80211_ATTR_RX_SIGNAL_DBM, sig_dbm);
NLA_PUT(msg, NL80211_ATTR_FRAME, len, buf);

genlmsg_end(msg, hdr);
@@ -7952,7 +7955,7 @@ EXPORT_SYMBOL(cfg80211_probe_status);

void cfg80211_report_obss_beacon(struct wiphy *wiphy,
const u8 *frame, size_t len,
- int freq, gfp_t gfp)
+ int freq, int sig_dbm, gfp_t gfp)
{
struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
struct sk_buff *msg;
@@ -7975,6 +7978,8 @@ void cfg80211_report_obss_beacon(struct
NLA_PUT_U32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx);
if (freq)
NLA_PUT_U32(msg, NL80211_ATTR_WIPHY_FREQ, freq);
+ if (sig_dbm)
+ NLA_PUT_U32(msg, NL80211_ATTR_RX_SIGNAL_DBM, sig_dbm);
NLA_PUT(msg, NL80211_ATTR_FRAME, len, frame);

genlmsg_end(msg, hdr);
--- a/net/wireless/mlme.c 2012-03-02 13:28:10.000000000 +0100
+++ b/net/wireless/mlme.c 2012-03-02 13:28:13.000000000 +0100
@@ -814,8 +814,8 @@ int cfg80211_mlme_mgmt_tx(struct cfg8021
cookie);
}

-bool cfg80211_rx_mgmt(struct net_device *dev, int freq, const u8 *buf,
- size_t len, gfp_t gfp)
+bool cfg80211_rx_mgmt(struct net_device *dev, int freq, int sig_mbm,
+ const u8 *buf, size_t len, gfp_t gfp)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct wiphy *wiphy = wdev->wiphy;
@@ -854,7 +854,8 @@ bool cfg80211_rx_mgmt(struct net_device
/* found match! */

/* Indicate the received Action frame to user space */
- if (nl80211_send_mgmt(rdev, dev, reg->nlpid, freq,
+ if (nl80211_send_mgmt(rdev, dev, reg->nlpid,
+ freq, sig_mbm,
buf, len, gfp))
continue;

--- a/net/mac80211/rx.c 2012-03-02 13:28:12.000000000 +0100
+++ b/net/mac80211/rx.c 2012-03-02 13:30:48.000000000 +0100
@@ -2182,9 +2182,14 @@ ieee80211_rx_h_mgmt_check(struct ieee802
if (rx->sdata->vif.type == NL80211_IFTYPE_AP &&
ieee80211_is_beacon(mgmt->frame_control) &&
!(rx->flags & IEEE80211_RX_BEACON_REPORTED)) {
+ int sig = 0;
+
+ if (rx->local->hw.flags & IEEE80211_HW_SIGNAL_DBM)
+ sig = status->signal;
+
cfg80211_report_obss_beacon(rx->local->hw.wiphy,
rx->skb->data, rx->skb->len,
- status->freq, GFP_ATOMIC);
+ status->freq, sig, GFP_ATOMIC);
rx->flags |= IEEE80211_RX_BEACON_REPORTED;
}

@@ -2408,6 +2413,7 @@ static ieee80211_rx_result debug_noinlin
ieee80211_rx_h_userspace_mgmt(struct ieee80211_rx_data *rx)
{
struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(rx->skb);
+ int sig = 0;

/* skip known-bad action frames and return them in the next handler */
if (status->rx_flags & IEEE80211_RX_MALFORMED_ACTION_FRM)
@@ -2420,7 +2426,10 @@ ieee80211_rx_h_userspace_mgmt(struct iee
* it transmitted were processed or returned.
*/

- if (cfg80211_rx_mgmt(rx->sdata->dev, status->freq,
+ if (rx->local->hw.flags & IEEE80211_HW_SIGNAL_DBM)
+ sig = status->signal;
+
+ if (cfg80211_rx_mgmt(rx->sdata->dev, status->freq, sig,
rx->skb->data, rx->skb->len,
GFP_ATOMIC)) {
if (rx->sta)
--- a/net/wireless/nl80211.h 2012-02-23 17:03:23.000000000 +0100
+++ b/net/wireless/nl80211.h 2012-03-02 13:32:01.000000000 +0100
@@ -92,7 +92,8 @@ void nl80211_send_sta_del_event(struct c
gfp_t gfp);

int nl80211_send_mgmt(struct cfg80211_registered_device *rdev,
- struct net_device *netdev, u32 nlpid, int freq,
+ struct net_device *netdev, u32 nlpid,
+ int freq, int sig_dbm,
const u8 *buf, size_t len, gfp_t gfp);
void nl80211_send_mgmt_tx_status(struct cfg80211_registered_device *rdev,
struct net_device *netdev, u64 cookie,




2012-03-05 20:47:05

by John W. Linville

[permalink] [raw]
Subject: Re: [PATCH] cfg80211/mac80211: report signal strength for mgmt frames

On Fri, Mar 02, 2012 at 01:40:35PM +0100, Johannes Berg wrote:
> From: Johannes Berg <[email protected]>
>
> Add the signal strength (in dBm only for now) to
> frames that are received via nl80211's various
> frame APIs.
>
> Signed-off-by: Johannes Berg <[email protected]>
> ---
> include/linux/nl80211.h | 6 ++++++
> include/net/cfg80211.h | 8 +++++---
> net/mac80211/rx.c | 13 +++++++++++--
> net/wireless/mlme.c | 7 ++++---
> net/wireless/nl80211.c | 9 +++++++--
> net/wireless/nl80211.h | 3 ++-
> 6 files changed, 35 insertions(+), 11 deletions(-)

CC drivers/net/wireless/ath/ath6kl/wmi.o
drivers/net/wireless/ath/ath6kl/wmi.c: In function ‘ath6kl_wmi_rx_probe_req_event_rx’:
drivers/net/wireless/ath/ath6kl/wmi.c:559:3: warning: passing argument 3 of ‘cfg80211_rx_mgmt’ makes integer from pointer without a cast
include/net/cfg80211.h:3205:6: note: expected ‘int’ but argument is of type ‘u8 *’
drivers/net/wireless/ath/ath6kl/wmi.c:559:3: warning: passing argument 4 of ‘cfg80211_rx_mgmt’ makes pointer from integer without a cast
include/net/cfg80211.h:3205:6: note: expected ‘const u8 *’ but argument is of type ‘u16’
drivers/net/wireless/ath/ath6kl/wmi.c:559:3: error: too few arguments to function ‘cfg80211_rx_mgmt’
include/net/cfg80211.h:3205:6: note: declared here
drivers/net/wireless/ath/ath6kl/wmi.c: In function ‘ath6kl_wmi_rx_action_event_rx’:
drivers/net/wireless/ath/ath6kl/wmi.c:598:2: warning: passing argument 3 of ‘cfg80211_rx_mgmt’ makes integer from pointer without a cast
include/net/cfg80211.h:3205:6: note: expected ‘int’ but argument is of type ‘u8 *’
drivers/net/wireless/ath/ath6kl/wmi.c:598:2: warning: passing argument 4 of ‘cfg80211_rx_mgmt’ makes pointer from integer without a cast
include/net/cfg80211.h:3205:6: note: expected ‘const u8 *’ but argument is of type ‘u16’
drivers/net/wireless/ath/ath6kl/wmi.c:598:2: error: too few arguments to function ‘cfg80211_rx_mgmt’
include/net/cfg80211.h:3205:6: note: declared here
make[3]: *** [drivers/net/wireless/ath/ath6kl/wmi.o] Error 1

--
John W. Linville Someday the world will need a hero, and you
[email protected] might be all we have. Be ready.

2012-03-05 21:18:44

by Johannes Berg

[permalink] [raw]
Subject: [PATCH v2] cfg80211/mac80211: report signal strength for mgmt frames

From: Johannes Berg <[email protected]>

Add the signal strength (in dBm only for now) to
frames that are received via nl80211's various
frame APIs.

Cc: Kalle Valo <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
---
v2: fix ath6kl -- it doesn't have this info in the WMI structs

drivers/net/wireless/ath/ath6kl/wmi.c | 6 ++++--
include/linux/nl80211.h | 6 ++++++
include/net/cfg80211.h | 8 +++++---
net/mac80211/rx.c | 13 +++++++++++--
net/wireless/mlme.c | 7 ++++---
net/wireless/nl80211.c | 9 +++++++--
net/wireless/nl80211.h | 3 ++-
7 files changed, 39 insertions(+), 13 deletions(-)

--- a/include/linux/nl80211.h 2012-03-02 13:40:45.000000000 +0100
+++ b/include/linux/nl80211.h 2012-03-05 22:15:41.000000000 +0100
@@ -1197,6 +1197,10 @@ enum nl80211_commands {
* @NL80211_ATTR_NOACK_MAP: This u16 bitmap contains the No Ack Policy of
* up to 16 TIDs.
*
+ * @NL80211_ATTR_RX_SIGNAL_DBM: signal strength in dBm (as a 32-bit int);
+ * this attribute is (depending on the driver capabilities) added to
+ * received frames indicated with %NL80211_CMD_FRAME.
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
@@ -1442,6 +1446,8 @@ enum nl80211_attrs {

NL80211_ATTR_NOACK_MAP,

+ NL80211_ATTR_RX_SIGNAL_DBM,
+
/* add attributes here, update the policy in nl80211.c */

__NL80211_ATTR_AFTER_LAST,
--- a/include/net/cfg80211.h 2012-03-05 22:15:37.000000000 +0100
+++ b/include/net/cfg80211.h 2012-03-05 22:15:41.000000000 +0100
@@ -3186,6 +3186,7 @@ void cfg80211_del_sta(struct net_device
* cfg80211_rx_mgmt - notification of received, unprocessed management frame
* @dev: network device
* @freq: Frequency on which the frame was received in MHz
+ * @sig_dbm: signal strength in mBm, or 0 if unknown
* @buf: Management frame (header + body)
* @len: length of the frame data
* @gfp: context flags
@@ -3198,8 +3199,8 @@ void cfg80211_del_sta(struct net_device
* This function is called whenever an Action frame is received for a station
* mode interface, but is not processed in kernel.
*/
-bool cfg80211_rx_mgmt(struct net_device *dev, int freq, const u8 *buf,
- size_t len, gfp_t gfp);
+bool cfg80211_rx_mgmt(struct net_device *dev, int freq, int sig_dbm,
+ const u8 *buf, size_t len, gfp_t gfp);

/**
* cfg80211_mgmt_tx_status - notification of TX status for management frame
@@ -3312,6 +3313,7 @@ void cfg80211_probe_status(struct net_de
* @frame: the frame
* @len: length of the frame
* @freq: frequency the frame was received on
+ * @sig_dbm: signal strength in mBm, or 0 if unknown
* @gfp: allocation flags
*
* Use this function to report to userspace when a beacon was
@@ -3320,7 +3322,7 @@ void cfg80211_probe_status(struct net_de
*/
void cfg80211_report_obss_beacon(struct wiphy *wiphy,
const u8 *frame, size_t len,
- int freq, gfp_t gfp);
+ int freq, int sig_dbm, gfp_t gfp);

/*
* cfg80211_can_beacon_sec_chan - test if ht40 on extension channel can be used
--- a/net/wireless/nl80211.c 2012-03-02 13:40:45.000000000 +0100
+++ b/net/wireless/nl80211.c 2012-03-05 22:15:41.000000000 +0100
@@ -7673,7 +7673,8 @@ bool nl80211_unexpected_4addr_frame(stru

int nl80211_send_mgmt(struct cfg80211_registered_device *rdev,
struct net_device *netdev, u32 nlpid,
- int freq, const u8 *buf, size_t len, gfp_t gfp)
+ int freq, int sig_dbm,
+ const u8 *buf, size_t len, gfp_t gfp)
{
struct sk_buff *msg;
void *hdr;
@@ -7691,6 +7692,8 @@ int nl80211_send_mgmt(struct cfg80211_re
NLA_PUT_U32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx);
NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex);
NLA_PUT_U32(msg, NL80211_ATTR_WIPHY_FREQ, freq);
+ if (sig_dbm)
+ NLA_PUT_U32(msg, NL80211_ATTR_RX_SIGNAL_DBM, sig_dbm);
NLA_PUT(msg, NL80211_ATTR_FRAME, len, buf);

genlmsg_end(msg, hdr);
@@ -7952,7 +7955,7 @@ EXPORT_SYMBOL(cfg80211_probe_status);

void cfg80211_report_obss_beacon(struct wiphy *wiphy,
const u8 *frame, size_t len,
- int freq, gfp_t gfp)
+ int freq, int sig_dbm, gfp_t gfp)
{
struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
struct sk_buff *msg;
@@ -7975,6 +7978,8 @@ void cfg80211_report_obss_beacon(struct
NLA_PUT_U32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx);
if (freq)
NLA_PUT_U32(msg, NL80211_ATTR_WIPHY_FREQ, freq);
+ if (sig_dbm)
+ NLA_PUT_U32(msg, NL80211_ATTR_RX_SIGNAL_DBM, sig_dbm);
NLA_PUT(msg, NL80211_ATTR_FRAME, len, frame);

genlmsg_end(msg, hdr);
--- a/net/wireless/mlme.c 2012-03-02 13:40:45.000000000 +0100
+++ b/net/wireless/mlme.c 2012-03-05 22:15:41.000000000 +0100
@@ -814,8 +814,8 @@ int cfg80211_mlme_mgmt_tx(struct cfg8021
cookie);
}

-bool cfg80211_rx_mgmt(struct net_device *dev, int freq, const u8 *buf,
- size_t len, gfp_t gfp)
+bool cfg80211_rx_mgmt(struct net_device *dev, int freq, int sig_mbm,
+ const u8 *buf, size_t len, gfp_t gfp)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct wiphy *wiphy = wdev->wiphy;
@@ -854,7 +854,8 @@ bool cfg80211_rx_mgmt(struct net_device
/* found match! */

/* Indicate the received Action frame to user space */
- if (nl80211_send_mgmt(rdev, dev, reg->nlpid, freq,
+ if (nl80211_send_mgmt(rdev, dev, reg->nlpid,
+ freq, sig_mbm,
buf, len, gfp))
continue;

--- a/net/mac80211/rx.c 2012-03-05 22:15:39.000000000 +0100
+++ b/net/mac80211/rx.c 2012-03-05 22:15:41.000000000 +0100
@@ -2182,9 +2182,14 @@ ieee80211_rx_h_mgmt_check(struct ieee802
if (rx->sdata->vif.type == NL80211_IFTYPE_AP &&
ieee80211_is_beacon(mgmt->frame_control) &&
!(rx->flags & IEEE80211_RX_BEACON_REPORTED)) {
+ int sig = 0;
+
+ if (rx->local->hw.flags & IEEE80211_HW_SIGNAL_DBM)
+ sig = status->signal;
+
cfg80211_report_obss_beacon(rx->local->hw.wiphy,
rx->skb->data, rx->skb->len,
- status->freq, GFP_ATOMIC);
+ status->freq, sig, GFP_ATOMIC);
rx->flags |= IEEE80211_RX_BEACON_REPORTED;
}

@@ -2408,6 +2413,7 @@ static ieee80211_rx_result debug_noinlin
ieee80211_rx_h_userspace_mgmt(struct ieee80211_rx_data *rx)
{
struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(rx->skb);
+ int sig = 0;

/* skip known-bad action frames and return them in the next handler */
if (status->rx_flags & IEEE80211_RX_MALFORMED_ACTION_FRM)
@@ -2420,7 +2426,10 @@ ieee80211_rx_h_userspace_mgmt(struct iee
* it transmitted were processed or returned.
*/

- if (cfg80211_rx_mgmt(rx->sdata->dev, status->freq,
+ if (rx->local->hw.flags & IEEE80211_HW_SIGNAL_DBM)
+ sig = status->signal;
+
+ if (cfg80211_rx_mgmt(rx->sdata->dev, status->freq, sig,
rx->skb->data, rx->skb->len,
GFP_ATOMIC)) {
if (rx->sta)
--- a/net/wireless/nl80211.h 2012-03-02 13:40:45.000000000 +0100
+++ b/net/wireless/nl80211.h 2012-03-05 22:15:41.000000000 +0100
@@ -92,7 +92,8 @@ void nl80211_send_sta_del_event(struct c
gfp_t gfp);

int nl80211_send_mgmt(struct cfg80211_registered_device *rdev,
- struct net_device *netdev, u32 nlpid, int freq,
+ struct net_device *netdev, u32 nlpid,
+ int freq, int sig_dbm,
const u8 *buf, size_t len, gfp_t gfp);
void nl80211_send_mgmt_tx_status(struct cfg80211_registered_device *rdev,
struct net_device *netdev, u64 cookie,
--- a/drivers/net/wireless/ath/ath6kl/wmi.c 2012-02-24 16:39:05.000000000 +0100
+++ b/drivers/net/wireless/ath/ath6kl/wmi.c 2012-03-05 22:17:47.000000000 +0100
@@ -556,7 +556,8 @@ static int ath6kl_wmi_rx_probe_req_event
dlen, freq, vif->probe_req_report);

if (vif->probe_req_report || vif->nw_type == AP_NETWORK)
- cfg80211_rx_mgmt(vif->ndev, freq, ev->data, dlen, GFP_ATOMIC);
+ cfg80211_rx_mgmt(vif->ndev, freq, 0,
+ ev->data, dlen, GFP_ATOMIC);

return 0;
}
@@ -595,7 +596,8 @@ static int ath6kl_wmi_rx_action_event_rx
return -EINVAL;
}
ath6kl_dbg(ATH6KL_DBG_WMI, "rx_action: len=%u freq=%u\n", dlen, freq);
- cfg80211_rx_mgmt(vif->ndev, freq, ev->data, dlen, GFP_ATOMIC);
+ cfg80211_rx_mgmt(vif->ndev, freq, 0,
+ ev->data, dlen, GFP_ATOMIC);

return 0;
}



2012-03-06 13:25:53

by Kalle Valo

[permalink] [raw]
Subject: Re: [PATCH v2] cfg80211/mac80211: report signal strength for mgmt frames

On 03/05/2012 11:18 PM, Johannes Berg wrote:
> From: Johannes Berg <[email protected]>
>
> Add the signal strength (in dBm only for now) to
> frames that are received via nl80211's various
> frame APIs.
>
> Cc: Kalle Valo <[email protected]>
> Signed-off-by: Johannes Berg <[email protected]>

For the ath6kl part:

Acked-by: Kalle Valo <[email protected]>

Kalle

2012-03-05 21:00:42

by Johannes Berg

[permalink] [raw]
Subject: Re: [PATCH] cfg80211/mac80211: report signal strength for mgmt frames

On Mon, 2012-03-05 at 15:42 -0500, John W. Linville wrote:
> On Fri, Mar 02, 2012 at 01:40:35PM +0100, Johannes Berg wrote:
> > From: Johannes Berg <[email protected]>
> >
> > Add the signal strength (in dBm only for now) to
> > frames that are received via nl80211's various
> > frame APIs.
> >
> > Signed-off-by: Johannes Berg <[email protected]>
> > ---
> > include/linux/nl80211.h | 6 ++++++
> > include/net/cfg80211.h | 8 +++++---
> > net/mac80211/rx.c | 13 +++++++++++--
> > net/wireless/mlme.c | 7 ++++---
> > net/wireless/nl80211.c | 9 +++++++--
> > net/wireless/nl80211.h | 3 ++-
> > 6 files changed, 35 insertions(+), 11 deletions(-)
>
> CC drivers/net/wireless/ath/ath6kl/wmi.o
> drivers/net/wireless/ath/ath6kl/wmi.c: In function ‘ath6kl_wmi_rx_probe_req_event_rx’:
> drivers/net/wireless/ath/ath6kl/wmi.c:559:3: warning: passing argument 3 of ‘cfg80211_rx_mgmt’ makes integer from pointer without a cast
> include/net/cfg80211.h:3205:6: note: expected ‘int’ but argument is of type ‘u8 *’
> drivers/net/wireless/ath/ath6kl/wmi.c:559:3: warning: passing argument 4 of ‘cfg80211_rx_mgmt’ makes pointer from integer without a cast
> include/net/cfg80211.h:3205:6: note: expected ‘const u8 *’ but argument is of type ‘u16’
> drivers/net/wireless/ath/ath6kl/wmi.c:559:3: error: too few arguments to function ‘cfg80211_rx_mgmt’
> include/net/cfg80211.h:3205:6: note: declared here
> drivers/net/wireless/ath/ath6kl/wmi.c: In function ‘ath6kl_wmi_rx_action_event_rx’:
> drivers/net/wireless/ath/ath6kl/wmi.c:598:2: warning: passing argument 3 of ‘cfg80211_rx_mgmt’ makes integer from pointer without a cast
> include/net/cfg80211.h:3205:6: note: expected ‘int’ but argument is of type ‘u8 *’
> drivers/net/wireless/ath/ath6kl/wmi.c:598:2: warning: passing argument 4 of ‘cfg80211_rx_mgmt’ makes pointer from integer without a cast
> include/net/cfg80211.h:3205:6: note: expected ‘const u8 *’ but argument is of type ‘u16’
> drivers/net/wireless/ath/ath6kl/wmi.c:598:2: error: too few arguments to function ‘cfg80211_rx_mgmt’
> include/net/cfg80211.h:3205:6: note: declared here
> make[3]: *** [drivers/net/wireless/ath/ath6kl/wmi.o] Error 1

Oh crap, I forgot about ath6kl, sorry!

johannes