2012-05-15 07:09:40

by Thomas Pedersen

[permalink] [raw]
Subject: [PATCH v3] ath6kl: enable enhanced bmiss detection

Enable enhanced bmiss detection if the firmware supports it. This
feature is only enabled on some firmwares since it comes with a power
cost.

Also add a few missing command ids to keep the enums straight.

Signed-off-by: Thomas Pedersen <[email protected]>

---
v2:
comments (Kalle)
indentation (Kalle)

v3:
use ath6kl_err() (Kalle)

drivers/net/wireless/ath/ath6kl/cfg80211.c | 29 ++++++++++++++++++++++++++++
drivers/net/wireless/ath/ath6kl/cfg80211.h | 2 +
drivers/net/wireless/ath/ath6kl/core.h | 3 ++
drivers/net/wireless/ath/ath6kl/init.c | 3 ++
drivers/net/wireless/ath/ath6kl/wmi.c | 19 ++++++++++++++++++
drivers/net/wireless/ath/ath6kl/wmi.h | 11 ++++++++++
6 files changed, 67 insertions(+), 0 deletions(-)

diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c
index b869a35..af0c48a 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.c
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c
@@ -575,6 +575,8 @@ static int ath6kl_cfg80211_connect(struct wiphy *wiphy, struct net_device *dev,
}

vif->nw_type = vif->next_mode;
+ /* enable enhanced bmiss detection if applicable */
+ ath6kl_cfg80211_sta_bmiss_enhance(vif, true);

if (vif->wdev.iftype == NL80211_IFTYPE_P2P_CLIENT)
nw_subtype = SUBTYPE_P2PCLIENT;
@@ -1512,6 +1514,9 @@ static int ath6kl_cfg80211_change_iface(struct wiphy *wiphy,
}
}

+ /* need to clean up enhanced bmiss detection fw state */
+ ath6kl_cfg80211_sta_bmiss_enhance(vif, false);
+
set_iface_type:
switch (type) {
case NL80211_IFTYPE_STATION:
@@ -2614,6 +2619,30 @@ static int ath6kl_set_channel(struct wiphy *wiphy, struct net_device *dev,
return 0;
}

+void ath6kl_cfg80211_sta_bmiss_enhance(struct ath6kl_vif *vif, bool enable)
+{
+ int err;
+
+ if (WARN_ON(!test_bit(WMI_READY, &vif->ar->flag)))
+ return;
+
+ if (vif->nw_type != INFRA_NETWORK)
+ return;
+
+ if (!test_bit(ATH6KL_FW_CAPABILITY_BMISS_ENHANCE,
+ vif->ar->fw_capabilities))
+ return;
+
+ ath6kl_dbg(ATH6KL_DBG_WLAN_CFG, "%s fw bmiss enhance\n",
+ enable ? "enable" : "disable");
+ err = ath6kl_wmi_sta_bmiss_enhance_cmd(vif->ar->wmi,
+ vif->fw_vif_idx, enable);
+ if (err)
+ ath6kl_err(ATH6KL_DBG_WLAN_CFG,
+ "failed to %s enhanced bmiss detection: %d\n",
+ enable ? "enable" : "disable", err);
+}
+
static int ath6kl_get_rsn_capab(struct cfg80211_beacon_data *beacon,
u8 *rsn_capab)
{
diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.h b/drivers/net/wireless/ath/ath6kl/cfg80211.h
index 5ea8cbb..b992046 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.h
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.h
@@ -62,5 +62,7 @@ void ath6kl_cfg80211_cleanup(struct ath6kl *ar);

struct ath6kl *ath6kl_cfg80211_create(void);
void ath6kl_cfg80211_destroy(struct ath6kl *ar);
+/* TODO: remove this once ath6kl_vif_cleanup() is moved to cfg80211.c */
+void ath6kl_cfg80211_sta_bmiss_enhance(struct ath6kl_vif *vif, bool enable);

#endif /* ATH6KL_CFG80211_H */
diff --git a/drivers/net/wireless/ath/ath6kl/core.h b/drivers/net/wireless/ath/ath6kl/core.h
index 4d9c6f1..cb79378 100644
--- a/drivers/net/wireless/ath/ath6kl/core.h
+++ b/drivers/net/wireless/ath/ath6kl/core.h
@@ -100,6 +100,9 @@ enum ath6kl_fw_capability {
/* Firmware has support to override rsn cap of rsn ie */
ATH6KL_FW_CAPABILITY_RSN_CAP_OVERRIDE,

+ /* Firmware supports enhanced bmiss detection */
+ ATH6KL_FW_CAPABILITY_BMISS_ENHANCE,
+
/* this needs to be last */
ATH6KL_FW_CAPABILITY_MAX,
};
diff --git a/drivers/net/wireless/ath/ath6kl/init.c b/drivers/net/wireless/ath/ath6kl/init.c
index 7eb0515..10de132 100644
--- a/drivers/net/wireless/ath/ath6kl/init.c
+++ b/drivers/net/wireless/ath/ath6kl/init.c
@@ -1659,6 +1659,9 @@ void ath6kl_cleanup_vif(struct ath6kl_vif *vif, bool wmi_ready)
cfg80211_scan_done(vif->scan_req, true);
vif->scan_req = NULL;
}
+
+ /* need to clean up enhanced bmiss detection fw state */
+ ath6kl_cfg80211_sta_bmiss_enhance(vif, false);
}

void ath6kl_stop_txrx(struct ath6kl *ar)
diff --git a/drivers/net/wireless/ath/ath6kl/wmi.c b/drivers/net/wireless/ath/ath6kl/wmi.c
index ee8ec23..09a9e0c 100644
--- a/drivers/net/wireless/ath/ath6kl/wmi.c
+++ b/drivers/net/wireless/ath/ath6kl/wmi.c
@@ -2997,6 +2997,25 @@ int ath6kl_wmi_add_del_mcast_filter_cmd(struct wmi *wmi, u8 if_idx,
return ret;
}

+int ath6kl_wmi_sta_bmiss_enhance_cmd(struct wmi *wmi, u8 if_idx, bool enhance)
+{
+ struct sk_buff *skb;
+ struct wmi_sta_bmiss_enhance_cmd *cmd;
+ int ret;
+
+ skb = ath6kl_wmi_get_new_buf(sizeof(*cmd));
+ if (!skb)
+ return -ENOMEM;
+
+ cmd = (struct wmi_sta_bmiss_enhance_cmd *) skb->data;
+ cmd->enable = enhance ? 1 : 0;
+
+ ret = ath6kl_wmi_cmd_send(wmi, if_idx, skb,
+ WMI_STA_BMISS_ENHANCE_CMDID,
+ NO_SYNC_WMIFLAG);
+ return ret;
+}
+
s32 ath6kl_wmi_get_rate(s8 rate_index)
{
if (rate_index == RATE_AUTO)
diff --git a/drivers/net/wireless/ath/ath6kl/wmi.h b/drivers/net/wireless/ath/ath6kl/wmi.h
index 9076bec..014f3dd 100644
--- a/drivers/net/wireless/ath/ath6kl/wmi.h
+++ b/drivers/net/wireless/ath/ath6kl/wmi.h
@@ -624,6 +624,10 @@ enum wmi_cmd_id {
WMI_SEND_MGMT_CMDID,
WMI_BEGIN_SCAN_CMDID,

+ WMI_SET_BLACK_LIST,
+ WMI_SET_MCASTRATE,
+
+ WMI_STA_BMISS_ENHANCE_CMDID,
};

enum wmi_mgmt_frame_type {
@@ -1017,6 +1021,11 @@ struct wmi_bmiss_time_cmd {
__le16 num_beacons;
};

+/* WMI_STA_ENHANCE_BMISS_CMDID */
+struct wmi_sta_bmiss_enhance_cmd {
+ u8 enable;
+} __packed;
+
/* WMI_SET_POWER_MODE_CMDID */
enum wmi_power_mode {
REC_POWER = 0x01,
@@ -2547,6 +2556,8 @@ int ath6kl_wmi_set_roam_mode_cmd(struct wmi *wmi, enum wmi_roam_mode mode);
int ath6kl_wmi_mcast_filter_cmd(struct wmi *wmi, u8 if_idx, bool mc_all_on);
int ath6kl_wmi_add_del_mcast_filter_cmd(struct wmi *wmi, u8 if_idx,
u8 *filter, bool add_filter);
+int ath6kl_wmi_sta_bmiss_enhance_cmd(struct wmi *wmi, u8 if_idx, bool enable);
+
/* AP mode uAPSD */
int ath6kl_wmi_ap_set_apsd(struct wmi *wmi, u8 if_idx, u8 enable);

--
1.7.4.1



2012-05-16 13:24:15

by Kalle Valo

[permalink] [raw]
Subject: Re: [PATCH v3] ath6kl: enable enhanced bmiss detection

On 05/15/2012 10:09 AM, Thomas Pedersen wrote:
> Enable enhanced bmiss detection if the firmware supports it. This
> feature is only enabled on some firmwares since it comes with a power
> cost.
>
> Also add a few missing command ids to keep the enums straight.
>
> Signed-off-by: Thomas Pedersen <[email protected]>

Thanks, applied. There was a one compiler warning with ath6kl_err(), I
amended a fix for that.

Kalle