2012-06-11 18:02:59

by Rajkumar Manoharan

[permalink] [raw]
Subject: [PATCH v2 1/2] ath9k: defer btcoex scheme update

As btcoex scheme updation might sleep, remove the function call
from tasklet context and queue it up as a separate work.

Signed-off-by: Rajkumar Manoharan <[email protected]>
---
v2: moved cancel_work inside ath_cancel_work
drivers/net/wireless/ath/ath9k/ath9k.h | 1 +
drivers/net/wireless/ath/ath9k/main.c | 3 +++
drivers/net/wireless/ath/ath9k/mci.c | 14 +++++++++++---
3 files changed, 15 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 02fc1c1..a8c0500 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -698,6 +698,7 @@ struct ath_softc {
#ifdef CONFIG_ATH9K_BTCOEX_SUPPORT
struct ath_btcoex btcoex;
struct ath_mci_coex mci_coex;
+ struct work_struct mci_work;
#endif

struct ath_descdma txsdma;
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index e655f2a..a6f83b6 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -150,6 +150,9 @@ static void __ath_cancel_work(struct ath_softc *sc)
cancel_work_sync(&sc->hw_check_work);
cancel_delayed_work_sync(&sc->tx_complete_work);
cancel_delayed_work_sync(&sc->hw_pll_work);
+#ifdef CONFIG_ATH9K_BTCOEX_SUPPORT
+ cancel_work_sync(&sc->mci_work);
+#endif
}

static void ath_cancel_work(struct ath_softc *sc)
diff --git a/drivers/net/wireless/ath/ath9k/mci.c b/drivers/net/wireless/ath/ath9k/mci.c
index 92d61cc..e53df86 100644
--- a/drivers/net/wireless/ath/ath9k/mci.c
+++ b/drivers/net/wireless/ath/ath9k/mci.c
@@ -52,7 +52,7 @@ static bool ath_mci_add_profile(struct ath_common *common,
(info->type != MCI_GPM_COEX_PROFILE_VOICE))
return false;

- entry = kzalloc(sizeof(*entry), GFP_KERNEL);
+ entry = kzalloc(sizeof(*entry), GFP_ATOMIC);
if (!entry)
return false;

@@ -219,6 +219,13 @@ static void ath_mci_cal_msg(struct ath_softc *sc, u8 opcode, u8 *rx_payload)
}
}

+static void ath9k_mci_work(struct work_struct *work)
+{
+ struct ath_softc *sc = container_of(work, struct ath_softc, mci_work);
+
+ ath_mci_update_scheme(sc);
+}
+
static void ath_mci_process_profile(struct ath_softc *sc,
struct ath_mci_profile_info *info)
{
@@ -249,7 +256,7 @@ static void ath_mci_process_profile(struct ath_softc *sc,
btcoex->duty_cycle = ATH_BTCOEX_DEF_DUTY_CYCLE;
}

- ath_mci_update_scheme(sc);
+ ieee80211_queue_work(sc->hw, &sc->mci_work);
}

static void ath_mci_process_status(struct ath_softc *sc,
@@ -283,7 +290,7 @@ static void ath_mci_process_status(struct ath_softc *sc,
} while (++i < ATH_MCI_MAX_PROFILE);

if (old_num_mgmt != mci->num_mgmt)
- ath_mci_update_scheme(sc);
+ ieee80211_queue_work(sc->hw, &sc->mci_work);
}

static void ath_mci_msg(struct ath_softc *sc, u8 opcode, u8 *rx_payload)
@@ -377,6 +384,7 @@ int ath_mci_setup(struct ath_softc *sc)
mci->gpm_buf.bf_addr, (mci->gpm_buf.bf_len >> 4),
mci->sched_buf.bf_paddr);

+ INIT_WORK(&sc->mci_work, ath9k_mci_work);
ath_dbg(common, MCI, "MCI Initialized\n");

return 0;
--
1.7.10.4



2012-06-11 18:03:53

by Rajkumar Manoharan

[permalink] [raw]
Subject: [PATCH v2 2/2] ath9k: fix btcoex duty cycle

* Reset duty cycle before updating btcoex scheme. Otherwise duty cycle
reaches max limit and never be reduced again
* Adjust duty cycle with proper BDR profile value

Signed-off-by: Rajkumar Manoharan <[email protected]>
---
drivers/net/wireless/ath/ath9k/mci.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath9k/mci.c b/drivers/net/wireless/ath/ath9k/mci.c
index e53df86..5246067 100644
--- a/drivers/net/wireless/ath/ath9k/mci.c
+++ b/drivers/net/wireless/ath/ath9k/mci.c
@@ -120,6 +120,9 @@ static void ath_mci_update_scheme(struct ath_softc *sc)
if (mci_hw->config & ATH_MCI_CONFIG_DISABLE_TUNING)
goto skip_tuning;

+ btcoex->duty_cycle = num_profile ? ath_mci_duty_cycle[num_profile] :
+ ATH_BTCOEX_DEF_DUTY_CYCLE;
+
if (num_profile == 1) {
info = list_first_entry(&mci->info,
struct ath_mci_profile_info,
@@ -178,7 +181,7 @@ skip_tuning:
if (IS_CHAN_5GHZ(sc->sc_ah->curchan))
return;

- btcoex->duty_cycle += (mci->num_bdr ? ATH_MCI_MAX_DUTY_CYCLE : 0);
+ btcoex->duty_cycle += (mci->num_bdr ? ATH_MCI_BDR_DUTY_CYCLE : 0);
if (btcoex->duty_cycle > ATH_MCI_MAX_DUTY_CYCLE)
btcoex->duty_cycle = ATH_MCI_MAX_DUTY_CYCLE;

--
1.7.10.4