From: Mohammed Shafi Shajakhan <[email protected]>
Its safe to stop the BTCOEX timers 'period_timer' and
'no_stomp_timer' before disabling BTCOEX. These timers
can call ath9k_hw_btcoex_enable (or) change the BT
stomp type if they seem to be running after we had
called ath9k_hw_btcoex_disable, which is obviously
not correct.
Cc: Rajkumar Manoharan <[email protected]>
Cc: Bala Shanmugam <[email protected]>
Signed-off-by: Mohammed Shafi Shajakhan <[email protected]>
---
drivers/net/wireless/ath/ath9k/gpio.c | 2 +-
drivers/net/wireless/ath/ath9k/mci.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/gpio.c b/drivers/net/wireless/ath/ath9k/gpio.c
index 43557c2..2830cbc 100644
--- a/drivers/net/wireless/ath/ath9k/gpio.c
+++ b/drivers/net/wireless/ath/ath9k/gpio.c
@@ -377,9 +377,9 @@ void ath9k_stop_btcoex(struct ath_softc *sc)
if (ah->btcoex_hw.enabled &&
ath9k_hw_get_btcoex_scheme(ah) != ATH_BTCOEX_CFG_NONE) {
- ath9k_hw_btcoex_disable(ah);
if (ath9k_hw_get_btcoex_scheme(ah) == ATH_BTCOEX_CFG_3WIRE)
ath9k_btcoex_timer_pause(sc);
+ ath9k_hw_btcoex_disable(ah);
if (AR_SREV_9462(ah))
ath_mci_flush_profile(&sc->btcoex.mci);
}
diff --git a/drivers/net/wireless/ath/ath9k/mci.c b/drivers/net/wireless/ath/ath9k/mci.c
index 64cc782..87acff7 100644
--- a/drivers/net/wireless/ath/ath9k/mci.c
+++ b/drivers/net/wireless/ath/ath9k/mci.c
@@ -174,8 +174,8 @@ skip_tuning:
btcoex->btcoex_period >>= 1;
}
- ath9k_hw_btcoex_disable(sc->sc_ah);
ath9k_btcoex_timer_pause(sc);
+ ath9k_hw_btcoex_disable(sc->sc_ah);
if (IS_CHAN_5GHZ(sc->sc_ah->curchan))
return;
--
1.7.0.4