This patch contains following modifications:
- Add mesh capabilities on fw.c to permit creation of mesh
interfaces using this driver.
- Modify carl9170_set_operating_mode, to use AP-style beaconing
with mesh interfaces.
- Allow beacon updates for NL80211_IFTYPE_MESH_POINT type in
carl9170_handle_command_response.
- Add NL80211_IFTYPE_MESH_POINT case on carl9170_op_add_interfaces to
support mesh/ap/sta virtual interface combinations.
Signed-off-by: Javier Lopez <[email protected]>
---
v2: support mesh/ap/sta vif combinations (Christian)
drivers/net/wireless/ath/carl9170/fw.c | 1 +
drivers/net/wireless/ath/carl9170/mac.c | 2 +-
drivers/net/wireless/ath/carl9170/rx.c | 1 +
3 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/carl9170/fw.c b/drivers/net/wireless/ath/carl9170/fw.c
index cba9d04..b03d7bf 100644
--- a/drivers/net/wireless/ath/carl9170/fw.c
+++ b/drivers/net/wireless/ath/carl9170/fw.c
@@ -304,6 +304,7 @@ static int carl9170_fw(struct ar9170 *ar, const __u8 *data, size_t len)
if (SUPP(CARL9170FW_WLANTX_CAB)) {
if_comb_types |=
BIT(NL80211_IFTYPE_AP) |
+ BIT(NL80211_IFTYPE_MESH_POINT) |
BIT(NL80211_IFTYPE_P2P_GO);
}
}
diff --git a/drivers/net/wireless/ath/carl9170/mac.c b/drivers/net/wireless/ath/carl9170/mac.c
index dfda919..a5f5fa0 100644
--- a/drivers/net/wireless/ath/carl9170/mac.c
+++ b/drivers/net/wireless/ath/carl9170/mac.c
@@ -318,10 +318,10 @@ int carl9170_set_operating_mode(struct ar9170 *ar)
bssid = common->curbssid;
switch (vif->type) {
- case NL80211_IFTYPE_MESH_POINT:
case NL80211_IFTYPE_ADHOC:
cam_mode |= AR9170_MAC_CAM_IBSS;
break;
+ case NL80211_IFTYPE_MESH_POINT:
case NL80211_IFTYPE_AP:
cam_mode |= AR9170_MAC_CAM_AP;
diff --git a/drivers/net/wireless/ath/carl9170/rx.c b/drivers/net/wireless/ath/carl9170/rx.c
index dc99030..3be2130 100644
--- a/drivers/net/wireless/ath/carl9170/rx.c
+++ b/drivers/net/wireless/ath/carl9170/rx.c
@@ -206,6 +206,7 @@ void carl9170_handle_command_response(struct ar9170 *ar, void *buf, u32 len)
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_ADHOC:
+ case NL80211_IFTYPE_MESH_POINT:
carl9170_update_beacon(ar, true);
break;
--
1.7.9.5