Drop defconfigs that were destined to enable specific builds, but
they are not used at all. Let's clean them.
Signed-off-by: Ozan Çağlayan <[email protected]>
---
defconfigs/README | 2 -
defconfigs/atheros-debug.mk | 649 --------------------------------------------
2 files changed, 651 deletions(-)
delete mode 100644 defconfigs/README
delete mode 100644 defconfigs/atheros-debug.mk
diff --git a/defconfigs/README b/defconfigs/README
deleted file mode 100644
index 5dcd84a..0000000
--- a/defconfigs/README
+++ /dev/null
@@ -1,2 +0,0 @@
-You can stuff into this directory default config.mk files which are suited
-for debugging or other testing purposes.
diff --git a/defconfigs/atheros-debug.mk b/defconfigs/atheros-debug.mk
deleted file mode 100644
index 285b231..0000000
--- a/defconfigs/atheros-debug.mk
+++ /dev/null
@@ -1,649 +0,0 @@
-export
-
-## NOTE
-## Make sure to have each variable declaration start
-## in the first column, no whitespace allowed.
-
-ifeq ($(wildcard $(KLIB_BUILD)/.config),)
-# These will be ignored by compat autoconf
- CONFIG_PCI=y
- CONFIG_USB=y
- CONFIG_PCMCIA=y
- CONFIG_SSB=m
-else
-include $(KLIB_BUILD)/.config
-endif
-
-ifneq ($(wildcard $(KLIB_BUILD)/Makefile),)
-
-COMPAT_LATEST_VERSION = 1
-
-KERNEL_VERSION := $(shell $(MAKE) -C $(KLIB_BUILD) kernelversion | sed -n 's/^\([0-9]\)\..*/\1/p')
-
-ifneq ($(KERNEL_VERSION),2)
-KERNEL_SUBLEVEL := $(shell $(MAKE) -C $(KLIB_BUILD) kernelversion | sed -n 's/^3\.\([0-9]\+\).*/\1/p')
-else
-COMPAT_26LATEST_VERSION = 39
-KERNEL_26SUBLEVEL := $(shell $(MAKE) -C $(KLIB_BUILD) kernelversion | sed -n 's/^2\.6\.\([0-9]\+\).*/\1/p')
-COMPAT_26VERSIONS := $(shell I=$(COMPAT_26LATEST_VERSION); while [ "$$I" -gt $(KERNEL_26SUBLEVEL) ]; do echo $$I; I=$$(($$I - 1)); done)
-$(foreach ver,$(COMPAT_26VERSIONS),$(eval CONFIG_COMPAT_KERNEL_2_6_$(ver)=y))
-KERNEL_SUBLEVEL := -1
-endif
-
-COMPAT_VERSIONS := $(shell I=$(COMPAT_LATEST_VERSION); while [ "$$I" -gt $(KERNEL_SUBLEVEL) ]; do echo $$I; I=$$(($$I - 1)); done)
-$(foreach ver,$(COMPAT_VERSIONS),$(eval CONFIG_COMPAT_KERNEL_3_$(ver)=y))
-
-ifdef CONFIG_COMPAT_KERNEL_2_6_24
-$(error "ERROR: compat-wireless by default supports kernels >= 2.6.24, try enabling only one driver though")
-endif #CONFIG_COMPAT_KERNEL_2_6_24
-
-ifeq ($(CONFIG_CFG80211),y)
-$(error "ERROR: your kernel has CONFIG_CFG80211=y, you should have it CONFIG_CFG80211=m if you want to use this thing.")
-endif
-
-
-# 2.6.27 has FTRACE_DYNAMIC borked, so we will complain if
-# you have it enabled, otherwise you will very likely run into
-# a kernel panic.
-ifeq ($(shell test $(KERNEL_VERSION) -eq 2 -a $(KERNEL_SUBLEVEL) -eq 27 && echo yes),yes)
-ifeq ($(CONFIG_DYNAMIC_FTRACE),y)
-$(error "ERROR: Your 2.6.27 kernel has CONFIG_DYNAMIC_FTRACE, please upgrade your distribution kernel as newer ones should not have this enabled (and if so report a bug) or remove this warning if you know what you are doing")
-endif
-endif
-
-# This is because with CONFIG_MAC80211 include/linux/skbuff.h will
-# enable on 2.6.27 a new attribute:
-#
-# skb->do_not_encrypt
-#
-# and on 2.6.28 another new attribute:
-#
-# skb->requeue
-#
-# In kernel 2.6.32 both attributes were removed.
-#
-ifeq ($(shell test $(KERNEL_VERSION) -eq 2 -a $(KERNEL_SUBLEVEL) -ge 27 -a $(KERNEL_SUBLEVEL) -le 31 && echo yes),yes)
-ifeq ($(CONFIG_MAC80211),)
-$(error "ERROR: Your >=2.6.27 and <= 2.6.31 kernel has CONFIG_MAC80211 disabled, you should have it CONFIG_MAC80211=m if you want to use this thing.")
-endif
-endif
-
-ifneq ($(KERNELRELEASE),) # This prevents a warning
-
-# We will warn when you don't have MQ support or NET_SCHED enabled.
-#
-# We could consider just quiting if MQ and NET_SCHED is disabled
-# as I suspect all users of this package want 802.11e (WME) and
-# 802.11n (HT) support.
-ifeq ($(CONFIG_NET_SCHED),)
- QOS_REQS_MISSING+=CONFIG_NET_SCHED
-endif
-
-ifneq ($(QOS_REQS_MISSING),) # Complain about our missing dependencies
-$(warning "WARNING: You are running a kernel >= 2.6.23, you should enable in it $(QOS_REQS_MISSING) for 802.11[ne] support")
-endif
-
-endif # build check
-endif # kernel Makefile check
-
-# These both are needed by compat-wireless || compat-bluetooth so enable them
- CONFIG_COMPAT_RFKILL=y
-
-ifeq ($(CONFIG_MAC80211),y)
-$(error "ERROR: you have MAC80211 compiled into the kernel, CONFIG_MAC80211=y, as such you cannot replace its mac80211 driver. You need this set to CONFIG_MAC80211=m. If you are using Fedora upgrade your kernel as later version should this set as modular. For further information on Fedora see https://bugzilla.redhat.com/show_bug.cgi?id=470143. If you are using your own kernel recompile it and make mac80211 modular")
-else
- CONFIG_COMPAT_WIRELESS=y
- CONFIG_COMPAT_WIRELESS_MODULES=m
- CONFIG_COMPAT_VAR_MODULES=m
-# We could technically separate these but not yet, we only have b44
-# Note that we don't intend on backporting network drivers that
-# use Multiqueue as that was a pain to backport to kernels older than
-# 2.6.27. But -- we could just disable those drivers from kernels
-# older than 2.6.27
- CONFIG_COMPAT_NETWORK_MODULES=m
- CONFIG_COMPAT_NET_USB_MODULES=m
-endif
-
-# The Bluetooth compatibility only builds on kernels >= 2.6.27 for now
-ifndef CONFIG_COMPAT_KERNEL_2_6_27
-ifeq ($(CONFIG_BT),y)
-# we'll ignore compiling bluetooth
-else
- CONFIG_COMPAT_BLUETOOTH=y
- CONFIG_COMPAT_BLUETOOTH_MODULES=m
-endif
-endif #CONFIG_COMPAT_KERNEL_2_6_27
-
-ifdef CONFIG_COMPAT_KERNEL_2_6_33
-ifdef CONFIG_FW_LOADER
- CONFIG_COMPAT_FIRMWARE_CLASS=m
-endif #CONFIG_FW_LOADER
-endif #CONFIG_COMPAT_KERNEL_2_6_33
-
-# Wireless subsystem stuff
-CONFIG_MAC80211=m
-
-CONFIG_MAC80211_DEBUGFS=y
-CONFIG_MAC80211_NOINLINE=y
-CONFIG_MAC80211_VERBOSE_DEBUG=y
-CONFIG_MAC80211_HT_DEBUG=y
-# CONFIG_MAC80211_TKIP_DEBUG=y
-# CONFIG_MAC80211_IBSS_DEBUG=y
-CONFIG_MAC80211_VERBOSE_PS_DEBUG=y
-# CONFIG_MAC80211_VERBOSE_MPL_DEBUG=y
-# CONFIG_MAC80211_VERBOSE_MHWMP_DEBUG=y
-CONFIG_MAC80211_DEBUG_COUNTERS=y
-# CONFIG_MAC80211_DRIVER_API_TRACER=y
-
-# choose between pid and minstrel as default rate control algorithm
-CONFIG_MAC80211_RC_DEFAULT=minstrel_ht
-CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
-# CONFIG_MAC80211_RC_DEFAULT_PID=y
-# This is the one used by our compat-wireless net/mac80211/rate.c
-# in case you have and old kernel which is overriding this to pid.
-CONFIG_COMPAT_MAC80211_RC_DEFAULT=minstrel_ht
-CONFIG_MAC80211_RC_PID=y
-CONFIG_MAC80211_RC_MINSTREL=y
-CONFIG_MAC80211_RC_MINSTREL_HT=y
-ifdef CONFIG_LEDS_TRIGGERS
-CONFIG_MAC80211_LEDS=y
-endif #CONFIG_LEDS_TRIGGERS
-
-# enable mesh networking too
-CONFIG_MAC80211_MESH=y
-
-CONFIG_CFG80211=m
-CONFIG_CFG80211_DEFAULT_PS=y
-CONFIG_CFG80211_DEBUGFS=y
-# CONFIG_NL80211_TESTMODE=y
-CONFIG_CFG80211_DEVELOPER_WARNINGS=y
-CONFIG_CFG80211_REG_DEBUG=y
-# See below for wext stuff
-
-CONFIG_LIB80211=m
-CONFIG_LIB80211_CRYPT_WEP=m
-CONFIG_LIB80211_CRYPT_CCMP=m
-CONFIG_LIB80211_CRYPT_TKIP=m
-# CONFIG_LIB80211_DEBUG=y
-
-CONFIG_BT=m
-CONFIG_COMPAT_BT_L2CAP=y
-CONFIG_COMPAT_BT_SCO=y
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-# CONFIG_BT_CMTP depends on ISDN_CAPI
-ifdef CONFIG_ISDN_CAPI
-CONFIG_BT_CMTP=m
-endif #CONFIG_ISDN_CAPI
-ifndef CONFIG_COMPAT_KERNEL_2_6_28
-CONFIG_COMPAT_BT_HIDP=m
-endif #CONFIG_COMPAT_KERNEL_2_6_28
-
-CONFIG_BT_HCIUART=M
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_ATH3K=y
-CONFIG_BT_HCIUART_LL=y
-
-CONFIG_BT_HCIVHCI=m
-CONFIG_BT_MRVL=m
-
-ifdef CONFIG_PCMCIA
-CONFIG_BT_HCIDTL1=m
-CONFIG_BT_HCIBT3C=m
-CONFIG_BT_HCIBLUECARD=m
-CONFIG_BT_HCIBTUART=m
-endif #CONFIG_PCMCIA
-
-
-# We need CONFIG_WIRELESS_EXT for CONFIG_CFG80211_WEXT for every kernel
-# version. The new way CONFIG_CFG80211_WEXT is called from the kernel
-# does not work with compat-wireless because it calls some callback
-# function on struct wiphy. This struct is shipped with compat-wireless
-# and changes from kernel version to version. We are using the
-# wireless_handlers attribute which will be activated by
-# CONFIG_WIRELESS_EXT.
-ifdef CONFIG_WIRELESS_EXT
-CONFIG_CFG80211_WEXT=y
-else #CONFIG_CFG80211_WEXT
-$(warning "WARNING: CONFIG_CFG80211_WEXT will be deactivated or not working because kernel was compiled with CONFIG_WIRELESS_EXT=n. Tools using wext interface like iwconfig will not work. To activate it build your kernel e.g. with CONFIG_LIBIPW=m.")
-endif #CONFIG_WIRELESS_EXT
-
-ifdef CONFIG_STAGING
-CONFIG_COMPAT_STAGING=m
-endif #CONFIG_STAGING
-
-# mac80211 test driver
-CONFIG_MAC80211_HWSIM=m
-
-CONFIG_ATH5K=m
-CONFIG_ATH5K_DEBUG=y
-# CONFIG_ATH5K_AHB=y
-
-CONFIG_ATH9K=m
-CONFIG_ATH9K_HW=m
-CONFIG_ATH9K_COMMON=m
-CONFIG_ATH9K_DEBUGFS=y
-# CONFIG_ATH9K_AHB=y
-CONFIG_ATH9K_PKTLOG=y
-
-# Disable this to get minstrel as default, we leave the ath9k
-# rate control algorithm as the default for now as that is also
-# default upstream on the kernel. We will move this to minstrel
-# as default once we get minstrel properly tested and blessed by
-# our systems engineering team. CCK rates also need to be used
-# for long range considerations.
-CONFIG_ATH9K_RATE_CONTROL=y
-
-# PCI Drivers
-ifdef CONFIG_PCI
-
-CONFIG_ATH5K_PCI=y
-CONFIG_ATH9K_PCI=y
-
-CONFIG_IWLAGN=m
-# CONFIG_IWLWIFI_DEBUG=y
-# CONFIG_IWLWIFI_DEBUGFS=y
-# CONFIG_IWLWIFI_DEVICE_TRACING=y
-# CONFIG_IWLWIFI_DEBUG_EXPERIMENTAL_UCODE=y
-CONFIG_IWL_P2P=y
-
-CONFIG_IWLWIFI_LEGACY=m
-CONFIG_COMPAT_IWL4965=m
-CONFIG_IWL3945=m
-# CONFIG_IWLWIFI_LEGACY_DEBUG=y
-# CONFIG_IWLWIFI_LEGACY_DEBUGFS=y
-# CONFIG_IWLWIFI_LEGACY_DEVICE_TRACING=y
-
-
-CONFIG_B43=m
-CONFIG_B43_HWRNG=y
-CONFIG_B43_PCI_AUTOSELECT=y
-ifdef CONFIG_PCMCIA
-CONFIG_B43_PCMCIA=y
-endif #CONFIG_PCMCIA
-ifdef CONFIG_MAC80211_LEDS
-CONFIG_B43_LEDS=y
-endif #CONFIG_MAC80211_LEDS
-CONFIG_B43_PHY_LP=y
-CONFIG_B43_PHY_N=y
-# CONFIG_B43_FORCE_PIO=y
-# CONFIG_B43_DEBUG=y
-
-CONFIG_B43LEGACY=m
-CONFIG_B43LEGACY_HWRNG=y
-CONFIG_B43LEGACY_PCI_AUTOSELECT=y
-ifdef CONFIG_MAC80211_LEDS
-CONFIG_B43LEGACY_LEDS=y
-endif #CONFIG_MAC80211_LEDS
-# CONFIG_B43LEGACY_DEBUG=y
-CONFIG_B43LEGACY_DMA=y
-CONFIG_B43LEGACY_PIO=y
-
-ifdef CONFIG_WIRELESS_EXT
-# The Intel ipws
-CONFIG_LIBIPW=m
-# CONFIG_LIBIPW_DEBUG=y
-
-CONFIG_IPW2100=m
-CONFIG_IPW2100_MONITOR=y
-# CONFIG_IPW2100_DEBUG=y
-CONFIG_IPW2200=m
-CONFIG_IPW2200_MONITOR=y
-CONFIG_IPW2200_RADIOTAP=y
-CONFIG_IPW2200_PROMISCUOUS=y
-CONFIG_IPW2200_QOS=y
-# CONFIG_IPW2200_DEBUG=y
-# The above enables use a second interface prefixed 'rtap'.
-# Example usage:
-#
-# % modprobe ipw2200 rtap_iface=1
-# % ifconfig rtap0 up
-# % tethereal -i rtap0
-#
-# If you do not specify 'rtap_iface=1' as a module parameter then
-# the rtap interface will not be created and you will need to turn
-# it on via sysfs:
-#
-# % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface
-endif #CONFIG_WIRELESS_EXT
-
-ifdef CONFIG_SSB
-# Sonics Silicon Backplane
-CONFIG_SSB_SPROM=y
-
-CONFIG_SSB_BLOCKIO=y
-CONFIG_SSB_PCIHOST=y
-CONFIG_SSB_B43_PCI_BRIDGE=y
-ifdef CONFIG_PCMCIA
-CONFIG_SSB_PCMCIAHOST=y
-endif #CONFIG_PCMCIA
-# CONFIG_SSB_DEBUG=y
-CONFIG_SSB_DRIVER_PCICORE=y
-endif #CONFIG_SSB
-
-CONFIG_BCMA=m
-CONFIG_BCMA_BLOCKIO=y
-CONFIG_BCMA_HOST_PCI=y
-# CONFIG_BCMA_DEBUG=y
-
-CONFIG_P54_PCI=m
-
-CONFIG_B44=m
-CONFIG_B44_PCI=y
-
-CONFIG_RTL8180=m
-
-CONFIG_ADM8211=m
-
-CONFIG_RT2X00_LIB_PCI=m
-CONFIG_RT2400PCI=m
-CONFIG_RT2500PCI=m
-ifdef CONFIG_CRC_CCITT
-CONFIG_RT2800PCI=m
-CONFIG_RT2800PCI_RT33XX=y
-CONFIG_RT2800PCI_RT35XX=y
-# CONFIG_RT2800PCI_RT53XX=y
-endif #CONFIG_CRC_CCITT
-NEED_RT2X00=y
-
-# Two rt2x00 drivers require firmware: rt61pci and rt73usb. They depend on
-# CRC to check the firmware. We check here first for the PCI
-# driver as we're in the PCI section.
-ifdef CONFIG_CRC_ITU_T
-CONFIG_RT61PCI=m
-endif #CONFIG_CRC_ITU_T
-
-CONFIG_MWL8K=m
-
-# Ethernet drivers go here
-CONFIG_ATL1=m
-CONFIG_ATL2=m
-CONFIG_ATL1E=m
-ifdef CONFIG_COMPAT_KERNEL_2_6_27
-CONFIG_ATL1C=n
-else #CONFIG_COMPAT_KERNEL_2_6_27
-CONFIG_ATL1C=m
-endif #CONFIG_COMPAT_KERNEL_2_6_27
-
-ifdef CONFIG_WIRELESS_EXT
-CONFIG_HERMES=m
-CONFIG_HERMES_CACHE_FW_ON_INIT=y
-ifdef CONFIG_PPC_PMAC
-CONFIG_APPLE_AIRPORT=m
-endif #CONFIG_PPC_PMAC
-CONFIG_PLX_HERMES=m
-CONFIG_TMD_HERMES=m
-CONFIG_NORTEL_HERMES=m
-CONFIG_PCI_HERMES=m
-ifdef CONFIG_PCMCIA
-CONFIG_PCMCIA_HERMES=m
-CONFIG_PCMCIA_SPECTRUM=m
-endif #CONFIG_PCMCIA
-endif #CONFIG_WIRELESS_EXT
-
-CONFIG_RTL8192CE=m
-CONFIG_RTL8192SE=m
-
-ifdef CONFIG_COMPAT_STAGING
-CONFIG_BRCMSMAC=m
-endif #CONFIG_COMPAT_STAGING
-
-endif #CONFIG_PCI
-## end of PCI
-
-ifdef CONFIG_PCMCIA
-
-ifdef CONFIG_COMPAT_KERNEL_2_6_27
-CONFIG_LIBERTAS=n
-CONFIG_LIBERTAS_CS=n
-else #CONFIG_COMPAT_KERNEL_2_6_27
-CONFIG_LIBERTAS_CS=m
-NEED_LIBERTAS=y
-endif #CONFIG_COMPAT_KERNEL_2_6_27
-
-endif #CONFIG_PCMCIA
-## end of PCMCIA
-
-# This is required for some cards
-CONFIG_EEPROM_93CX6=m
-
-# USB Drivers
-ifdef CONFIG_USB
-ifndef CONFIG_COMPAT_KERNEL_2_6_29
-CONFIG_COMPAT_ZD1211RW=m
-# CONFIG_ZD1211RW_DEBUG=y
-endif #CONFIG_COMPAT_KERNEL_2_6_29
-
-# Sorry, rndis_wlan uses cancel_work_sync which is new and can't be done in compat...
-
-# Wireless RNDIS USB support (RTL8185 802.11g) A-Link WL54PC
-# All of these devices are based on Broadcom 4320 chip which
-# is only wireless RNDIS chip known to date.
-# Note: this depends on CONFIG_USB_NET_RNDIS_HOST and CONFIG_USB_NET_CDCETHER
-# it also requires new RNDIS_HOST and CDC_ETHER modules which we add
-ifdef CONFIG_COMPAT_KERNEL_2_6_29
-CONFIG_USB_COMPAT_USBNET=n
-CONFIG_USB_NET_COMPAT_RNDIS_HOST=n
-CONFIG_USB_NET_COMPAT_RNDIS_WLAN=n
-CONFIG_USB_NET_COMPAT_CDCETHER=n
-else #CONFIG_COMPAT_KERNEL_2_6_29
-CONFIG_USB_COMPAT_USBNET=m
-ifdef CONFIG_USB_NET_CDCETHER
-CONFIG_USB_NET_COMPAT_RNDIS_HOST=m
-CONFIG_USB_NET_COMPAT_RNDIS_WLAN=m
-endif #CONFIG_USB_NET_CDCETHER
-ifdef CONFIG_USB_NET_CDCETHER_MODULE
-CONFIG_USB_NET_COMPAT_RNDIS_HOST=m
-CONFIG_USB_NET_COMPAT_RNDIS_WLAN=m
-endif #CONFIG_USB_NET_CDCETHER
-CONFIG_USB_NET_COMPAT_CDCETHER=m
-endif #CONFIG_COMPAT_KERNEL_2_6_29
-
-
-CONFIG_P54_USB=m
-CONFIG_RTL8187=m
-ifdef CONFIG_MAC80211_LEDS
-CONFIG_RTL8187_LEDS=y
-endif #CONFIG_MAC80211_LEDS
-
-CONFIG_AT76C50X_USB=m
-
-ifndef CONFIG_COMPAT_KERNEL_2_6_29
-CONFIG_CARL9170=m
-ifdef CONFIG_MAC80211_LEDS
-CONFIG_CARL9170_LEDS=y
-endif #CONFIG_MAC80211_LEDS
-CONFIG_CARL9170_DEBUGFS=y
-CONFIG_CARL9170_WPC=y
-endif #CONFIG_COMPAT_KERNEL_2_6_29
-
-# This activates a threading fix for usb urb.
-# this is mainline commit: b3e670443b7fb8a2d29831b62b44a039c283e351
-# This fix will be included in some stable releases.
-CONFIG_COMPAT_USB_URB_THREAD_FIX=y
-
-CONFIG_ATH9K_HTC=m
-CONFIG_ATH9K_HTC_DEBUGFS=y
-
-# RT2500USB does not require firmware
-CONFIG_RT2500USB=m
-ifdef CONFIG_CRC_CCITT
-CONFIG_RT2800USB=m
-CONFIG_RT2800USB_RT33XX=y
-CONFIG_RT2800USB_RT35XX=y
-# CONFIG_RT2800USB_RT53XX=y
-CONFIG_RT2800USB_UNKNOWN=y
-endif #CONFIG_CRC_CCITT
-CONFIG_RT2X00_LIB_USB=m
-NEED_RT2X00=y
-# RT73USB requires firmware
-ifdef CONFIG_CRC_ITU_T
-CONFIG_RT73USB=m
-endif #CONFIG_CRC_ITU_T
-
-ifdef CONFIG_COMPAT_KERNEL_2_6_27
-CONFIG_LIBERTAS_THINFIRM_USB=n
-CONFIG_LIBERTAS_USB=n
-NEED_LIBERTAS=n
-else #CONFIG_COMPAT_KERNEL_2_6_27
-CONFIG_LIBERTAS_THINFIRM_USB=m
-CONFIG_LIBERTAS_USB=m
-NEED_LIBERTAS=y
-endif #CONFIG_COMPAT_KERNEL_2_6_27
-
-CONFIG_ORINOCO_USB=m
-
-CONFIG_BT_HCIBTUSB=m
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
-CONFIG_BT_ATH3K=m
-
-CONFIG_RTL8192CU=m
-
-endif #CONFIG_USB end of USB driver list
-
-ifdef CONFIG_SPI_MASTER
-ifndef CONFIG_COMPAT_KERNEL_2_6_25
-
-ifdef CONFIG_CRC7
-CONFIG_WL1251_SPI=m
-CONFIG_WL12XX_SPI=m
-endif #CONFIG_CRC7
-CONFIG_P54_SPI=m
-
-ifdef CONFIG_COMPAT_KERNEL_2_6_27
-CONFIG_LIBERTAS_SPI=n
-NEED_LIBERTAS=n
-else #CONFIG_COMPAT_KERNEL_2_6_27
-CONFIG_LIBERTAS_SPI=m
-NEED_LIBERTAS=y
-endif #CONFIG_COMPAT_KERNEL_2_6_27
-
-endif #CONFIG_COMPAT_KERNEL_2_6_25
-endif #CONFIG_SPI_MASTER end of SPI driver list
-
-ifdef CONFIG_MMC
-
-CONFIG_SSB_SDIOHOST=y
-CONFIG_B43_SDIO=y
-
-ifdef CONFIG_CRC7
-ifdef CONFIG_WL12XX_PLATFORM_DATA
-CONFIG_COMPAT_WL1251_SDIO=m
-endif #CONFIG_WL12XX_PLATFORM_DATA
-
-ifndef CONFIG_COMPAT_KERNEL_2_6_32
-ifdef CONFIG_WL12XX_PLATFORM_DATA
-CONFIG_COMPAT_WL12XX_SDIO=m
-endif #CONFIG_WL12XX_PLATFORM_DATA
-endif #CONFIG_COMPAT_KERNEL_2_6_32
-
-endif #CONFIG_CRC7
-
-CONFIG_MWIFIEX_SDIO=m
-
-ifdef CONFIG_COMPAT_KERNEL_2_6_27
-CONFIG_LIBERTAS_SDIO=n
-NEED_LIBERTAS=n
-else #CONFIG_COMPAT_KERNEL_2_6_27
-CONFIG_LIBERTAS_SDIO=m
-NEED_LIBERTAS=y
-endif #CONFIG_COMPAT_KERNEL_2_6_27
-
-CONFIG_IWM=m
-# CONFIG_IWM_DEBUG=y
-
-CONFIG_BT_HCIBTSDIO=m
-CONFIG_BT_MRVL_SDIO=m
-
-ifdef CONFIG_COMPAT_STAGING
-ifdef CONFIG_WIRELESS_EXT
-# CONFIG_ATH6KL_DISABLE_TARGET_DBGLOGS is not set
-# CONFIG_ATH6KL_ENABLE_COEXISTENCE is not set
-# CONFIG_ATH6KL_ENABLE_HOST_DEBUG is not set
-CONFIG_ATH6KL_ENABLE_TARGET_DEBUG_PRINTS=y
-# CONFIG_ATH6KL_HCI_BRIDGE is not set
-# CONFIG_ATH6KL_HTC_RAW_INTERFACE is not set
-# CONFIG_ATH6KL_SKIP_ABI_VERSION_CHECK is not set
-CONFIG_ATH6KL_VIRTUAL_SCATTER_GATHER=y
-CONFIG_ATH6K_LEGACY=m
-
-CONFIG_BRCMFMAC=m
-
-endif #CONFIG_WIRELESS_EXT
-endif #CONFIG_COMPAT_STAGING
-
-
-endif #CONFIG_MMC
-
-CONFIG_RTLWIFI=m
-CONFIG_RTL8192C_COMMON=m
-
-# Common rt2x00 requirements
-ifeq ($(NEED_RT2X00),y)
-CONFIG_RT2X00=y
-CONFIG_RT2X00_LIB=m
-CONFIG_RT2800_LIB=m
-CONFIG_RT2X00_LIB_FIRMWARE=y
-CONFIG_RT2X00_LIB_CRYPTO=y
-# CONFIG_RT2X00_LIB_SOC=y
-ifdef CONFIG_COMPAT_KERNEL_2_6_25
-CONFIG_RT2X00_LIB_LEDS=n
-else #CONFIG_COMPAT_KERNEL_2_6_25
-ifdef CONFIG_LEDS_CLASS
-CONFIG_RT2X00_LIB_LEDS=y
-endif #CONFIG_LEDS_CLASS
-endif #CONFIG_COMPAT_KERNEL_2_6_25
-# CONFIG_RT2X00_DEBUG=y
-# CONFIG_RT2X00_LIB_DEBUGFS
-endif
-
-# p54
-CONFIG_P54_COMMON=m
-ifdef CONFIG_MAC80211_LEDS
-CONFIG_P54_LEDS=y
-endif #CONFIG_MAC80211_LEDS
-
-# Atheros
-CONFIG_ATH_COMMON=m
-CONFIG_ATH_DEBUG=y
-
-ifdef CONFIG_COMPAT_STAGING
-CONFIG_BRCMUTIL=m
-# CONFIG_BRCMDBG=y
-endif #CONFIG_COMPAT_STAGING
-
-ifdef CONFIG_CRC7
-CONFIG_WL1251=m
-CONFIG_WL12XX=m
-CONFIG_WL12XX_HT=y
-endif #CONFIG_CRC7
-
-CONFIG_MWIFIEX=m
-
-ifdef CONFIG_COMPAT_KERNEL_2_6_27
-CONFIG_LIBERTAS=n
-else #CONFIG_COMPAT_KERNEL_2_6_27
-ifeq ($(NEED_LIBERTAS),y)
-CONFIG_LIBERTAS_THINFIRM=m
-CONFIG_LIBERTAS=m
-CONFIG_LIBERTAS_MESH=y
-# CONFIG_LIBERTAS_DEBUG=y
-endif
-endif #CONFIG_COMPAT_KERNEL_2_6_27
-
-# We need the backported rfkill module on kernel < 2.6.31.
-# In more recent kernel versions use the in kernel rfkill module.
-ifdef CONFIG_COMPAT_KERNEL_2_6_31
-CONFIG_RFKILL_BACKPORT=m
-ifdef CONFIG_LEDS_TRIGGERS
-CONFIG_RFKILL_BACKPORT_LEDS=y
-endif #CONFIG_LEDS_TRIGGERS
-CONFIG_RFKILL_BACKPORT_INPUT=y
-endif #CONFIG_COMPAT_KERNEL_2_6_31
-
--
1.7.11.2
On Mon, Aug 6, 2012 at 10:50 AM, Ozan Çağlayan <[email protected]> wrote:
> Drop defconfigs that were destined to enable specific builds, but
> they are not used at all. Let's clean them.
>
> Signed-off-by: Ozan Çağlayan <[email protected]>
Applied and pushed, thanks!
Luis