Hi,
In this serie, checkpatch complaints are :
- 1 "multiple assignments should be avoided"
- numerous "line over 80 characters" in trace.h macros
Johannes, I hope this one will make it through your filter ;).
Tomorrow I will make the drivers pass, I'll send the whole serie once I have
your go.
Karl
From: Karl Beldan <[email protected]>
Drivers can now advertise VHT support even if they don't use channel
contexts.
Signed-off-by: Karl Beldan <[email protected]>
---
drivers/net/wireless/mac80211_hwsim.c | 3 ---
1 files changed, 0 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index b8b562e..509539f 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -2312,9 +2312,6 @@ static int __init init_mac80211_hwsim(void)
hw->wiphy->bands[band] = sband;
- if (channels == 1)
- continue;
-
sband->vht_cap.vht_supported = true;
sband->vht_cap.cap =
IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_11454 |
--
1.7.9.dirty
From: Karl Beldan <[email protected]>
It is possible since the global hw config and local switched to
cfg80211_chan_def.
Signed-off-by: Karl Beldan <[email protected]>
---
net/mac80211/main.c | 14 +-------------
1 files changed, 1 insertions(+), 13 deletions(-)
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 25a87f4..4b2e654 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -838,22 +838,10 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
if (supp_ht)
local->scan_ies_len += 2 + sizeof(struct ieee80211_ht_cap);
- if (supp_vht) {
+ if (supp_vht)
local->scan_ies_len +=
2 + sizeof(struct ieee80211_vht_cap);
- /*
- * (for now at least), drivers wanting to use VHT must
- * support channel contexts, as they contain all the
- * necessary VHT information and the global hw config
- * doesn't (yet)
- */
- if (WARN_ON(!local->use_chanctx)) {
- result = -EINVAL;
- goto fail_wiphy_register;
- }
- }
-
if (!local->ops->hw_scan) {
/* For hw_scan, driver needs to set these up. */
local->hw.wiphy->max_scan_ssids = 4;
--
1.7.9.dirty
From: Karl Beldan <[email protected]>
Drivers that don't use chanctxes cannot perform VHT association because
they still use a "backward compatibility" pair of {ieee80211_channel,
nl80211_channel_type} in ieee80211_conf and ieee80211_local.
Signed-off-by: Karl Beldan <[email protected]>
---
drivers/net/wireless/mac80211_hwsim.c | 44 ++++++++++++++++--------
include/net/mac80211.h | 15 ++++----
net/mac80211/cfg.c | 7 +---
net/mac80211/chan.c | 11 +++---
net/mac80211/ieee80211_i.h | 3 +-
net/mac80211/main.c | 59 +++++++++++++++++++--------------
net/mac80211/mlme.c | 24 +++++++++----
net/mac80211/scan.c | 6 ++--
net/mac80211/trace.h | 37 +++++++++-----------
net/mac80211/tx.c | 4 +-
net/mac80211/util.c | 3 +-
11 files changed, 120 insertions(+), 93 deletions(-)
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 0064d38..b8b562e 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -1062,11 +1062,13 @@ out:
return HRTIMER_NORESTART;
}
-static const char *hwsim_chantypes[] = {
- [NL80211_CHAN_NO_HT] = "noht",
- [NL80211_CHAN_HT20] = "ht20",
- [NL80211_CHAN_HT40MINUS] = "ht40-",
- [NL80211_CHAN_HT40PLUS] = "ht40+",
+static const char * const hwsim_chanwidths[] = {
+ [NL80211_CHAN_WIDTH_20_NOHT] = "noht",
+ [NL80211_CHAN_WIDTH_20] = "ht20",
+ [NL80211_CHAN_WIDTH_40] = "ht40",
+ [NL80211_CHAN_WIDTH_80] = "vht80",
+ [NL80211_CHAN_WIDTH_80P80] = "vht80p80",
+ [NL80211_CHAN_WIDTH_160] = "vht160",
};
static int mac80211_hwsim_config(struct ieee80211_hw *hw, u32 changed)
@@ -1080,18 +1082,30 @@ static int mac80211_hwsim_config(struct ieee80211_hw *hw, u32 changed)
[IEEE80211_SMPS_DYNAMIC] = "dynamic",
};
- wiphy_debug(hw->wiphy,
- "%s (freq=%d/%s idle=%d ps=%d smps=%s)\n",
- __func__,
- conf->channel ? conf->channel->center_freq : 0,
- hwsim_chantypes[conf->channel_type],
- !!(conf->flags & IEEE80211_CONF_IDLE),
- !!(conf->flags & IEEE80211_CONF_PS),
- smps_modes[conf->smps_mode]);
+ if (conf->chandef.chan)
+ wiphy_debug(hw->wiphy,
+ "%s (freq=%d(%d - %d)/%s idle=%d ps=%d smps=%s)\n",
+ __func__,
+ conf->chandef.chan->center_freq,
+ conf->chandef.width > NL80211_CHAN_WIDTH_20 ?
+ conf->chandef.center_freq1 : 0,
+ conf->chandef.width > NL80211_CHAN_WIDTH_40 ?
+ conf->chandef.center_freq2 : 0,
+ hwsim_chanwidths[conf->chandef.width],
+ !!(conf->flags & IEEE80211_CONF_IDLE),
+ !!(conf->flags & IEEE80211_CONF_PS),
+ smps_modes[conf->smps_mode]);
+ else
+ wiphy_debug(hw->wiphy,
+ "%s (freq=0 idle=%d ps=%d smps=%s)\n",
+ __func__,
+ !!(conf->flags & IEEE80211_CONF_IDLE),
+ !!(conf->flags & IEEE80211_CONF_PS),
+ smps_modes[conf->smps_mode]);
data->idle = !!(conf->flags & IEEE80211_CONF_IDLE);
- data->channel = conf->channel;
+ data->channel = conf->chandef.chan;
WARN_ON(data->channel && channels > 1);
@@ -1277,7 +1291,7 @@ static int mac80211_hwsim_get_survey(
return -ENOENT;
/* Current channel */
- survey->channel = conf->channel;
+ survey->channel = conf->chandef.chan;
/*
* Magically conjured noise level --- this is only ok for simulated hardware.
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 9b53617..2cb6669 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -1001,8 +1001,7 @@ struct ieee80211_conf {
u8 long_frame_max_tx_count, short_frame_max_tx_count;
- struct ieee80211_channel *channel;
- enum nl80211_channel_type channel_type;
+ struct cfg80211_chan_def chandef;
bool radar_enabled;
enum ieee80211_smps_mode smps_mode;
};
@@ -4203,31 +4202,33 @@ void ieee80211_rate_control_unregister(struct rate_control_ops *ops);
static inline bool
conf_is_ht20(struct ieee80211_conf *conf)
{
- return conf->channel_type == NL80211_CHAN_HT20;
+ return conf->chandef.width == NL80211_CHAN_WIDTH_20;
}
static inline bool
conf_is_ht40_minus(struct ieee80211_conf *conf)
{
- return conf->channel_type == NL80211_CHAN_HT40MINUS;
+ return conf->chandef.width == NL80211_CHAN_WIDTH_40 &&
+ conf->chandef.center_freq1 < conf->chandef.chan->center_freq;
}
static inline bool
conf_is_ht40_plus(struct ieee80211_conf *conf)
{
- return conf->channel_type == NL80211_CHAN_HT40PLUS;
+ return conf->chandef.width == NL80211_CHAN_WIDTH_40 &&
+ conf->chandef.center_freq1 > conf->chandef.chan->center_freq;
}
static inline bool
conf_is_ht40(struct ieee80211_conf *conf)
{
- return conf_is_ht40_minus(conf) || conf_is_ht40_plus(conf);
+ return conf->chandef.width == NL80211_CHAN_WIDTH_40;
}
static inline bool
conf_is_ht(struct ieee80211_conf *conf)
{
- return conf->channel_type != NL80211_CHAN_NO_HT;
+ return conf->chandef.width != NL80211_CHAN_WIDTH_20_NOHT;
}
static inline enum nl80211_iftype
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 50aaf25..6e43feb 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -805,8 +805,7 @@ static int ieee80211_set_monitor_channel(struct wiphy *wiphy,
IEEE80211_CHANCTX_EXCLUSIVE);
}
} else if (local->open_count == local->monitors) {
- local->_oper_channel = chandef->chan;
- local->_oper_channel_type = cfg80211_get_chandef_type(chandef);
+ local->_oper_chandef = *chandef;
ieee80211_hw_config(local, 0);
}
@@ -3373,9 +3372,7 @@ static int ieee80211_cfg_get_channel(struct wiphy *wiphy,
if (local->use_chanctx)
*chandef = local->monitor_chandef;
else
- cfg80211_chandef_create(chandef,
- local->_oper_channel,
- local->_oper_channel_type);
+ *chandef = local->_oper_chandef;
ret = 0;
}
rcu_read_unlock();
diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c
index 78c0d90..8024874 100644
--- a/net/mac80211/chan.c
+++ b/net/mac80211/chan.c
@@ -22,7 +22,7 @@ static void ieee80211_change_chanctx(struct ieee80211_local *local,
drv_change_chanctx(local, ctx, IEEE80211_CHANCTX_CHANGE_WIDTH);
if (!local->use_chanctx) {
- local->_oper_channel_type = cfg80211_get_chandef_type(chandef);
+ local->_oper_chandef = *chandef;
ieee80211_hw_config(local, 0);
}
}
@@ -77,9 +77,7 @@ ieee80211_new_chanctx(struct ieee80211_local *local,
ctx->mode = mode;
if (!local->use_chanctx) {
- local->_oper_channel_type =
- cfg80211_get_chandef_type(chandef);
- local->_oper_channel = chandef->chan;
+ local->_oper_chandef = *chandef;
ieee80211_hw_config(local, 0);
} else {
err = drv_add_chanctx(local, ctx);
@@ -106,7 +104,10 @@ static void ieee80211_free_chanctx(struct ieee80211_local *local,
WARN_ON_ONCE(ctx->refcount != 0);
if (!local->use_chanctx) {
- local->_oper_channel_type = NL80211_CHAN_NO_HT;
+ struct cfg80211_chan_def *chandef = &local->_oper_chandef;
+ chandef->width = NL80211_CHAN_WIDTH_20_NOHT;
+ chandef->center_freq1 = chandef->chan->center_freq;
+ chandef->center_freq2 = 0;
ieee80211_hw_config(local, 0);
} else {
drv_remove_chanctx(local, ctx);
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 55155e3..0b77333 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1022,8 +1022,7 @@ struct ieee80211_local {
struct ieee80211_sub_if_data __rcu *scan_sdata;
struct ieee80211_channel *csa_channel;
/* For backward compatibility only -- do not use */
- struct ieee80211_channel *_oper_channel;
- enum nl80211_channel_type _oper_channel_type;
+ struct cfg80211_chan_def _oper_chandef;
/* Temporary remain-on-channel for off-channel operations */
struct ieee80211_channel *tmp_channel;
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index c6f81ec..25a87f4 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -95,42 +95,47 @@ static void ieee80211_reconfig_filter(struct work_struct *work)
static u32 ieee80211_hw_conf_chan(struct ieee80211_local *local)
{
struct ieee80211_sub_if_data *sdata;
- struct ieee80211_channel *chan;
+ struct cfg80211_chan_def chandef = {};
u32 changed = 0;
int power;
- enum nl80211_channel_type channel_type;
u32 offchannel_flag;
offchannel_flag = local->hw.conf.flags & IEEE80211_CONF_OFFCHANNEL;
+
if (local->scan_channel) {
- chan = local->scan_channel;
+ chandef.chan = local->scan_channel;
/* If scanning on oper channel, use whatever channel-type
* is currently in use.
*/
- if (chan == local->_oper_channel)
- channel_type = local->_oper_channel_type;
- else
- channel_type = NL80211_CHAN_NO_HT;
+ if (chandef.chan == local->_oper_chandef.chan) {
+ chandef = local->_oper_chandef;
+ } else {
+ chandef.width = NL80211_CHAN_WIDTH_20_NOHT;
+ chandef.center_freq1 = chandef.chan->center_freq;
+ }
} else if (local->tmp_channel) {
- chan = local->tmp_channel;
- channel_type = NL80211_CHAN_NO_HT;
- } else {
- chan = local->_oper_channel;
- channel_type = local->_oper_channel_type;
- }
-
- if (chan != local->_oper_channel ||
- channel_type != local->_oper_channel_type)
+ chandef.chan = local->tmp_channel;
+ chandef.width = NL80211_CHAN_WIDTH_20_NOHT;
+ chandef.center_freq1 = chandef.chan->center_freq;
+ } else
+ chandef = local->_oper_chandef;
+
+ WARN(!cfg80211_chandef_valid(&chandef),
+ "control:%d MHz width:%d center: %d/%d MHz",
+ chandef.chan->center_freq, chandef.width,
+ chandef.center_freq1, chandef.center_freq2);
+
+ if (!cfg80211_chandef_identical(&chandef, &local->_oper_chandef))
local->hw.conf.flags |= IEEE80211_CONF_OFFCHANNEL;
else
local->hw.conf.flags &= ~IEEE80211_CONF_OFFCHANNEL;
offchannel_flag ^= local->hw.conf.flags & IEEE80211_CONF_OFFCHANNEL;
- if (offchannel_flag || chan != local->hw.conf.channel ||
- channel_type != local->hw.conf.channel_type) {
- local->hw.conf.channel = chan;
- local->hw.conf.channel_type = channel_type;
+ if (offchannel_flag ||
+ !cfg80211_chandef_identical(&local->hw.conf.chandef,
+ &local->_oper_chandef)) {
+ local->hw.conf.chandef = chandef;
changed |= IEEE80211_CONF_CHANGE_CHANNEL;
}
@@ -146,7 +151,7 @@ static u32 ieee80211_hw_conf_chan(struct ieee80211_local *local)
changed |= IEEE80211_CONF_CHANGE_SMPS;
}
- power = chan->max_power;
+ power = chandef.chan->max_power;
rcu_read_lock();
list_for_each_entry_rcu(sdata, &local->interfaces, list) {
@@ -738,11 +743,15 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
sband = local->hw.wiphy->bands[band];
if (!sband)
continue;
- if (!local->use_chanctx && !local->_oper_channel) {
+ if (!local->use_chanctx && !local->_oper_chandef.chan) {
/* init channel we're on */
- local->hw.conf.channel =
- local->_oper_channel = &sband->channels[0];
- local->hw.conf.channel_type = NL80211_CHAN_NO_HT;
+ struct cfg80211_chan_def chandef = {
+ .chan = &sband->channels[0],
+ .width = NL80211_CHAN_NO_HT,
+ .center_freq1 = sband->channels[0].center_freq,
+ .center_freq2 = 0
+ };
+ local->hw.conf.chandef = local->_oper_chandef = chandef;
}
cfg80211_chandef_create(&local->monitor_chandef,
&sband->channels[0],
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 8b3e852..ab51976 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -988,6 +988,7 @@ static void ieee80211_chswitch_work(struct work_struct *work)
{
struct ieee80211_sub_if_data *sdata =
container_of(work, struct ieee80211_sub_if_data, u.mgd.chswitch_work);
+ struct ieee80211_local *local = sdata->local;
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
if (!ieee80211_sdata_running(sdata))
@@ -997,21 +998,30 @@ static void ieee80211_chswitch_work(struct work_struct *work)
if (!ifmgd->associated)
goto out;
- sdata->local->_oper_channel = sdata->local->csa_channel;
- if (!sdata->local->ops->channel_switch) {
+ /*
+ * FIXME: Here we are downgrading to NL80211_CHAN_WIDTH_20_NOHT
+ * and don't adjust our ht/vht settings
+ * This is wrong - we should behave according to the CSA params
+ */
+ local->_oper_chandef.chan = local->csa_channel;
+ local->_oper_chandef.width = NL80211_CHAN_WIDTH_20_NOHT;
+ local->_oper_chandef.center_freq1 =
+ local->_oper_chandef.chan->center_freq;
+ local->_oper_chandef.center_freq2 = 0;
+
+ if (!local->ops->channel_switch) {
/* call "hw_config" only if doing sw channel switch */
- ieee80211_hw_config(sdata->local,
- IEEE80211_CONF_CHANGE_CHANNEL);
+ ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
} else {
/* update the device channel directly */
- sdata->local->hw.conf.channel = sdata->local->_oper_channel;
+ local->hw.conf.chandef = local->_oper_chandef;
}
/* XXX: shouldn't really modify cfg80211-owned data! */
- ifmgd->associated->channel = sdata->local->_oper_channel;
+ ifmgd->associated->channel = local->_oper_chandef.chan;
/* XXX: wait for a beacon first? */
- ieee80211_wake_queues_by_reason(&sdata->local->hw,
+ ieee80211_wake_queues_by_reason(&local->hw,
IEEE80211_MAX_QUEUE_MAP,
IEEE80211_QUEUE_STOP_REASON_CSA);
out:
diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index cb34cbb..581764f 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -384,7 +384,7 @@ static void ieee80211_scan_state_send_probe(struct ieee80211_local *local,
{
int i;
struct ieee80211_sub_if_data *sdata;
- enum ieee80211_band band = local->hw.conf.channel->band;
+ enum ieee80211_band band = local->hw.conf.chandef.chan->band;
u32 tx_flags;
tx_flags = IEEE80211_TX_INTFL_OFFCHAN_TX_OK;
@@ -401,7 +401,7 @@ static void ieee80211_scan_state_send_probe(struct ieee80211_local *local,
local->scan_req->ssids[i].ssid_len,
local->scan_req->ie, local->scan_req->ie_len,
local->scan_req->rates[band], false,
- tx_flags, local->hw.conf.channel, true);
+ tx_flags, local->hw.conf.chandef.chan, true);
/*
* After sending probe requests, wait for probe responses
@@ -467,7 +467,7 @@ static int __ieee80211_start_scan(struct ieee80211_sub_if_data *sdata,
if (local->ops->hw_scan) {
__set_bit(SCAN_HW_SCANNING, &local->scanning);
} else if ((req->n_channels == 1) &&
- (req->channels[0] == local->_oper_channel)) {
+ (req->channels[0] == local->_oper_chandef.chan)) {
/*
* If we are scanning only on the operating channel
* then we do not need to stop normal activities
diff --git a/net/mac80211/trace.h b/net/mac80211/trace.h
index d79e374..8286dce 100644
--- a/net/mac80211/trace.h
+++ b/net/mac80211/trace.h
@@ -28,27 +28,27 @@
#define VIF_PR_FMT " vif:%s(%d%s)"
#define VIF_PR_ARG __get_str(vif_name), __entry->vif_type, __entry->p2p ? "/p2p" : ""
-#define CHANDEF_ENTRY __field(u32, control_freq) \
- __field(u32, chan_width) \
- __field(u32, center_freq1) \
+#define CHANDEF_ENTRY __field(u32, control_freq) \
+ __field(u32, chan_width) \
+ __field(u32, center_freq1) \
__field(u32, center_freq2)
-#define CHANDEF_ASSIGN(c) \
- __entry->control_freq = (c)->chan->center_freq; \
- __entry->chan_width = (c)->width; \
- __entry->center_freq1 = (c)->center_freq1; \
+#define CHANDEF_ASSIGN(c) \
+ __entry->control_freq = (c)->chan ? (c)->chan->center_freq : 0; \
+ __entry->chan_width = (c)->width; \
+ __entry->center_freq1 = (c)->center_freq1; \
__entry->center_freq2 = (c)->center_freq2;
#define CHANDEF_PR_FMT " control:%d MHz width:%d center: %d/%d MHz"
-#define CHANDEF_PR_ARG __entry->control_freq, __entry->chan_width, \
+#define CHANDEF_PR_ARG __entry->control_freq, __entry->chan_width, \
__entry->center_freq1, __entry->center_freq2
-#define CHANCTX_ENTRY CHANDEF_ENTRY \
- __field(u8, rx_chains_static) \
+#define CHANCTX_ENTRY CHANDEF_ENTRY \
+ __field(u8, rx_chains_static) \
__field(u8, rx_chains_dynamic)
-#define CHANCTX_ASSIGN CHANDEF_ASSIGN(&ctx->conf.def) \
- __entry->rx_chains_static = ctx->conf.rx_chains_static; \
+#define CHANCTX_ASSIGN CHANDEF_ASSIGN(&ctx->conf.def) \
+ __entry->rx_chains_static = ctx->conf.rx_chains_static; \
__entry->rx_chains_dynamic = ctx->conf.rx_chains_dynamic
#define CHANCTX_PR_FMT CHANDEF_PR_FMT " chains:%d/%d"
-#define CHANCTX_PR_ARG CHANDEF_PR_ARG, \
+#define CHANCTX_PR_ARG CHANDEF_PR_ARG, \
__entry->rx_chains_static, __entry->rx_chains_dynamic
@@ -286,8 +286,7 @@ TRACE_EVENT(drv_config,
__field(u16, listen_interval)
__field(u8, long_frame_max_tx_count)
__field(u8, short_frame_max_tx_count)
- __field(int, center_freq)
- __field(int, channel_type)
+ CHANDEF_ENTRY
__field(int, smps)
),
@@ -303,15 +302,13 @@ TRACE_EVENT(drv_config,
local->hw.conf.long_frame_max_tx_count;
__entry->short_frame_max_tx_count =
local->hw.conf.short_frame_max_tx_count;
- __entry->center_freq = local->hw.conf.channel ?
- local->hw.conf.channel->center_freq : 0;
- __entry->channel_type = local->hw.conf.channel_type;
+ CHANDEF_ASSIGN(&local->hw.conf.chandef)
__entry->smps = local->hw.conf.smps_mode;
),
TP_printk(
- LOCAL_PR_FMT " ch:%#x freq:%d",
- LOCAL_PR_ARG, __entry->changed, __entry->center_freq
+ LOCAL_PR_FMT " ch:%#x" CHANDEF_PR_FMT,
+ LOCAL_PR_ARG, __entry->changed, CHANDEF_PR_ARG
)
);
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 2a6ae80..38ffa1c 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1709,7 +1709,7 @@ netdev_tx_t ieee80211_monitor_start_xmit(struct sk_buff *skb,
if (chanctx_conf)
chan = chanctx_conf->def.chan;
else if (!local->use_chanctx)
- chan = local->_oper_channel;
+ chan = local->_oper_chandef.chan;
else
goto fail_rcu;
@@ -1843,7 +1843,7 @@ netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb,
* This is the exception! WDS style interfaces are prohibited
* when channel contexts are in used so this must be valid
*/
- band = local->hw.conf.channel->band;
+ band = local->hw.conf.chandef.chan->band;
break;
#ifdef CONFIG_MAC80211_MESH
case NL80211_IFTYPE_MESH_POINT:
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 90cc2b8..1734cd2 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -2171,8 +2171,7 @@ void ieee80211_dfs_radar_detected_work(struct work_struct *work)
/* currently not handled */
WARN_ON(1);
else {
- cfg80211_chandef_create(&chandef, local->hw.conf.channel,
- local->hw.conf.channel_type);
+ chandef = local->hw.conf.chandef;
cfg80211_radar_event(local->hw.wiphy, &chandef, GFP_KERNEL);
}
}
--
1.7.9.dirty
On Sun, 2013-03-24 at 23:17 +0100, Karl Beldan wrote:
> Johannes, I hope this one will make it through your filter ;).
> Tomorrow I will make the drivers pass, I'll send the whole serie once I have
> your go.
Yeah, looks good to me. Like you say, driver work is needed.
johannes