From: Amitkumar Karwar <[email protected]>
As Multiple-Port Aggregation base address value is fixed, we can
have a macro for it.
Signed-off-by: Amitkumar Karwar <[email protected]>
Signed-off-by: Bing Zhao <[email protected]>
---
drivers/net/wireless/mwifiex/sdio.c | 4 ++--
drivers/net/wireless/mwifiex/sdio.h | 1 +
2 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/mwifiex/sdio.c b/drivers/net/wireless/mwifiex/sdio.c
index 99a508b..1892e88 100644
--- a/drivers/net/wireless/mwifiex/sdio.c
+++ b/drivers/net/wireless/mwifiex/sdio.c
@@ -1100,7 +1100,7 @@ static int mwifiex_sdio_card_to_host_mp_aggr(struct mwifiex_adapter *adapter,
dev_dbg(adapter->dev, "info: do_rx_aggr: num of packets: %d\n",
card->mpa_rx.pkt_cnt);
- mport = (adapter->ioport | 0x1000 |
+ mport = (adapter->ioport | SDIO_MPA_ADDR_BASE |
(card->mpa_rx.ports << 4)) + card->mpa_rx.start_port;
if (mwifiex_read_data_sync(adapter, card->mpa_rx.buf,
@@ -1419,7 +1419,7 @@ static int mwifiex_host_to_card_mp_aggr(struct mwifiex_adapter *adapter,
dev_dbg(adapter->dev, "data: %s: send aggr buffer: %d %d\n",
__func__,
card->mpa_tx.start_port, card->mpa_tx.ports);
- mport = (adapter->ioport | 0x1000 |
+ mport = (adapter->ioport | SDIO_MPA_ADDR_BASE |
(card->mpa_tx.ports << 4)) + card->mpa_tx.start_port;
ret = mwifiex_write_data_to_card(adapter, card->mpa_tx.buf,
card->mpa_tx.buf_len, mport);
diff --git a/drivers/net/wireless/mwifiex/sdio.h b/drivers/net/wireless/mwifiex/sdio.h
index 0d931f7..e4016d2 100644
--- a/drivers/net/wireless/mwifiex/sdio.h
+++ b/drivers/net/wireless/mwifiex/sdio.h
@@ -42,6 +42,7 @@
#define MWIFIEX_SDIO_BYTE_MODE_MASK 0x80000000
+#define SDIO_MPA_ADDR_BASE 0x1000
#define CTRL_PORT 0
#define CTRL_PORT_MASK 0x0001
--
1.8.2.3