From: Sujith Manoharan <[email protected]>
The ath9k rate control algorithm has various architectural
issues that make it a poor fit in scenarios like congested
environments etc.
An example: https://bugzilla.redhat.com/show_bug.cgi?id=927191
Change the default to minstrel which is more robust in such cases.
The ath9k RC code is left in the driver for now, maybe it can
be removed altogether later on.
Cc: [email protected]
Cc: Jouni Malinen <[email protected]>
Cc: Linus Torvalds <[email protected]>
Signed-off-by: Sujith Manoharan <[email protected]>
---
drivers/net/wireless/ath/ath9k/Kconfig | 10 +++++++---
drivers/net/wireless/ath/ath9k/Makefile | 2 +-
drivers/net/wireless/ath/ath9k/init.c | 4 ----
drivers/net/wireless/ath/ath9k/rc.h | 2 +-
4 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig
index 3b07851..760ab3f 100644
--- a/drivers/net/wireless/ath/ath9k/Kconfig
+++ b/drivers/net/wireless/ath/ath9k/Kconfig
@@ -84,13 +84,17 @@ config ATH9K_DFS_CERTIFIED
developed. At this point enabling this option won't do anything
except increase code size.
-config ATH9K_RATE_CONTROL
+config ATH9K_LEGACY_RATE_CONTROL
bool "Atheros ath9k rate control"
depends on ATH9K
- default y
+ default n
---help---
Say Y, if you want to use the ath9k specific rate control
- module instead of minstrel_ht.
+ module instead of minstrel_ht. Be warned that there are various
+ issues with the ath9k RC and minstrel is a more robust algorithm.
+ Note that even if this option is selected, "ath9k_rate_control"
+ has to be passed to mac80211 using the module parameter,
+ ieee80211_default_rc_algo.
config ATH9K_HTC
tristate "Atheros HTC based wireless cards support"
diff --git a/drivers/net/wireless/ath/ath9k/Makefile b/drivers/net/wireless/ath/ath9k/Makefile
index 2ad8f94..75ee9e7 100644
--- a/drivers/net/wireless/ath/ath9k/Makefile
+++ b/drivers/net/wireless/ath/ath9k/Makefile
@@ -8,7 +8,7 @@ ath9k-y += beacon.o \
antenna.o
ath9k-$(CONFIG_ATH9K_BTCOEX_SUPPORT) += mci.o
-ath9k-$(CONFIG_ATH9K_RATE_CONTROL) += rc.o
+ath9k-$(CONFIG_ATH9K_LEGACY_RATE_CONTROL) += rc.o
ath9k-$(CONFIG_ATH9K_PCI) += pci.o
ath9k-$(CONFIG_ATH9K_AHB) += ahb.o
ath9k-$(CONFIG_ATH9K_DEBUGFS) += debug.o
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index db81acc..389ee1b 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -830,10 +830,6 @@ void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
sc->ant_rx = hw->wiphy->available_antennas_rx;
sc->ant_tx = hw->wiphy->available_antennas_tx;
-#ifdef CONFIG_ATH9K_RATE_CONTROL
- hw->rate_control_algorithm = "ath9k_rate_control";
-#endif
-
if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_2GHZ)
hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
&sc->sbands[IEEE80211_BAND_2GHZ];
diff --git a/drivers/net/wireless/ath/ath9k/rc.h b/drivers/net/wireless/ath/ath9k/rc.h
index 267dbfc..b9a8738 100644
--- a/drivers/net/wireless/ath/ath9k/rc.h
+++ b/drivers/net/wireless/ath/ath9k/rc.h
@@ -231,7 +231,7 @@ static inline void ath_debug_stat_retries(struct ath_rate_priv *rc, int rix,
}
#endif
-#ifdef CONFIG_ATH9K_RATE_CONTROL
+#ifdef CONFIG_ATH9K_LEGACY_RATE_CONTROL
int ath_rate_control_register(void);
void ath_rate_control_unregister(void);
#else
--
1.8.3