2013-06-20 14:25:35

by Kirshenbaum Erez

Subject: [PATCH 2/1] wil6210: set vring index for all descriptors

The vring index (MAC queue id) must be set in all TX descriptors
otherwise HW will fail to release descriptors for a specific vring
(disconnect or vring switch flows).
This is normally occurs when fragmentation required, if vring index
will not be the same for all SKB descriptors HW will fail to flush
this MAC queue.

Signed-off-by: Kirshenbaum Erez <[email protected]>
---
drivers/net/wireless/ath/wil6210/txrx.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index e1c492b..73d6c2d 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -621,7 +621,8 @@ static struct vring *wil_find_tx_vring(struct wil6210_priv *wil,
return NULL;
}

-static int wil_tx_desc_map(struct vring_tx_desc *d, dma_addr_t pa, u32 len)
+static int wil_tx_desc_map(struct vring_tx_desc *d, dma_addr_t pa, u32 len,
+ int vring_index)
{
wil_desc_addr_set(&d->dma.addr, pa);
d->dma.ip_length = 0;
@@ -630,7 +631,7 @@ static int wil_tx_desc_map(struct vring_tx_desc *d, dma_addr_t pa, u32 len)
d->dma.error = 0;
d->dma.status = 0; /* BIT(0) should be 0 for HW_OWNED */
d->dma.length = cpu_to_le16((u16)len);
- d->dma.d0 = 0;
+ d->dma.d0 = (vring_index << DMA_CFG_DESC_TX_0_QID_POS);
d->mac.d[0] = 0;
d->mac.d[1] = 0;
d->mac.d[2] = 0;
@@ -684,7 +685,7 @@ static int wil_tx_vring(struct wil6210_priv *wil, struct vring *vring,
if (unlikely(dma_mapping_error(dev, pa)))
return -EINVAL;
/* 1-st segment */
- wil_tx_desc_map(d, pa, skb_headlen(skb));
+ wil_tx_desc_map(d, pa, skb_headlen(skb), vring_index);
d->mac.d[2] |= ((nr_frags + 1) <<
MAC_CFG_DESC_TX_2_NUM_OF_DESCRIPTORS_POS);
if (nr_frags)
@@ -701,7 +702,7 @@ static int wil_tx_vring(struct wil6210_priv *wil, struct vring *vring,
DMA_TO_DEVICE);
if (unlikely(dma_mapping_error(dev, pa)))
goto dma_error;
- wil_tx_desc_map(d, pa, len);
+ wil_tx_desc_map(d, pa, len, vring_index);
vring->ctx[i] = NULL;
*_d = *d;
}
@@ -709,7 +710,6 @@ static int wil_tx_vring(struct wil6210_priv *wil, struct vring *vring,
d->dma.d0 |= BIT(DMA_CFG_DESC_TX_0_CMD_EOP_POS);
d->dma.d0 |= BIT(9); /* BUG: undocumented bit */
d->dma.d0 |= BIT(DMA_CFG_DESC_TX_0_CMD_DMA_IT_POS);
- d->dma.d0 |= (vring_index << DMA_CFG_DESC_TX_0_QID_POS);
*_d = *d;

wil_hex_dump_txrx("Tx ", DUMP_PREFIX_NONE, 32, 4,
--
1.7.11.7

2013-06-20 14:47:56

by Vladimir Kondratiev

Subject: Re: [PATCH 2/1] wil6210: set vring index for all descriptors

On Thursday, June 20, 2013 04:24:44 PM Kirshenbaum Erez wrote:
> The vring index (MAC queue id) must be set in all TX descriptors
> otherwise HW will fail to release descriptors for a specific vring
> (disconnect or vring switch flows).
> This is normally occurs when fragmentation required, if vring index
> will not be the same for all SKB descriptors HW will fail to flush
> this MAC queue.
>
> Signed-off-by: Kirshenbaum Erez <[email protected]>
>
Here is my
Signed-off-by: Vladimir Kondratiev <[email protected]>

Thanks.