When .release_buffered_frames was implemented, only A-MPDU packets were
buffered internally. Now that this has changed, the BUF_AMPDU flag needs
to be checked before calling ath_tx_addto_baw
Signed-off-by: Felix Fietkau <[email protected]>
---
drivers/net/wireless/ath/ath9k/xmit.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 5849960..9b3736e 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -1556,8 +1556,10 @@ void ath9k_release_buffered_frames(struct ieee80211_hw *hw,
__skb_unlink(bf->bf_mpdu, tid_q);
list_add_tail(&bf->list, &bf_q);
ath_set_rates(tid->an->vif, tid->an->sta, bf);
- ath_tx_addto_baw(sc, tid, bf);
- bf->bf_state.bf_type &= ~BUF_AGGR;
+ if (bf_isampdu(bf)) {
+ ath_tx_addto_baw(sc, tid, bf);
+ bf->bf_state.bf_type &= ~BUF_AGGR;
+ }
if (bf_tail)
bf_tail->bf_next = bf;
--
1.8.0.2