When not aggregating packets, fi->framelen should be passed in as length
to calculate the duration. Before the tx path rework, ath_tx_fill_desc
was called for either one aggregate, or one single frame, with the
length of the packet or the aggregate as a parameter.
After the rework, ath_tx_sched_aggr can pass a burst of single frames to
ath_tx_fill_desc and sets len=0.
Fix broken duration calculation by overriding the length in ath_tx_fill_desc
before passing it to ath_buf_set_rate.
Cc: [email protected]
Reported-by: Simon Wunderlich <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
---
drivers/net/wireless/ath/ath9k/xmit.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 09cdbcd..b5a19e0 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -1276,6 +1276,10 @@ static void ath_tx_fill_desc(struct ath_softc *sc, struct ath_buf *bf,
if (!rts_thresh || (len > rts_thresh))
rts = true;
}
+
+ if (!aggr)
+ len = fi->framelen;
+
ath_buf_set_rate(sc, bf, &info, len, rts);
}
--
1.8.3.4 (Apple Git-47)