From: andrea merello <[email protected]>
In rtl8180/rtl8187 drivers, few register bit definitions have
names of form FOOBAR_SHIFT, suggesting they should be used as
shift offset, for example
reg |= (1 << ENABLE_FOO_SHIFT).
However they are actually defined as (1 << x) and thus they are
used (correctly) like
reg |= ENABLE_FOO_SHIFT;
This patch kills the misleading _SHIFT suffix.
Signed-off-by: andrea merello <[email protected]>
---
drivers/net/wireless/rtl818x/rtl8180/dev.c | 8 ++++----
drivers/net/wireless/rtl818x/rtl8187/dev.c | 14 +++++++-------
drivers/net/wireless/rtl818x/rtl818x.h | 10 +++++-----
3 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c
index 8ec17aa..9bc843e 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c
@@ -602,13 +602,13 @@ static int rtl8180_start(struct ieee80211_hw *dev)
if (priv->r8185) {
reg = rtl818x_ioread8(priv, &priv->map->CW_CONF);
- reg &= ~RTL818X_CW_CONF_PERPACKET_CW_SHIFT;
- reg |= RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT;
+ reg &= ~RTL818X_CW_CONF_PERPACKET_CW;
+ reg |= RTL818X_CW_CONF_PERPACKET_RETRY;
rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg);
reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL);
- reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT;
- reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT;
+ reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN;
+ reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL;
reg |= RTL818X_TX_AGC_CTL_FEEDBACK_ANT;
rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg);
diff --git a/drivers/net/wireless/rtl818x/rtl8187/dev.c b/drivers/net/wireless/rtl818x/rtl8187/dev.c
index fd78df8..c981bcf 100644
--- a/drivers/net/wireless/rtl818x/rtl8187/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8187/dev.c
@@ -785,7 +785,7 @@ static int rtl8187b_init_hw(struct ieee80211_hw *dev)
rtl818x_iowrite16(priv, (__le16 *)0xFF34, 0x0FFF);
reg = rtl818x_ioread8(priv, &priv->map->CW_CONF);
- reg |= RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT;
+ reg |= RTL818X_CW_CONF_PERPACKET_RETRY;
rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg);
/* Auto Rate Fallback Register (ARFR): 1M-54M setting */
@@ -943,8 +943,8 @@ static int rtl8187_start(struct ieee80211_hw *dev)
rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg);
reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL);
- reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT;
- reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT;
+ reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN;
+ reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL;
reg &= ~RTL818X_TX_AGC_CTL_FEEDBACK_ANT;
rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg);
@@ -986,13 +986,13 @@ static int rtl8187_start(struct ieee80211_hw *dev)
rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg);
reg = rtl818x_ioread8(priv, &priv->map->CW_CONF);
- reg &= ~RTL818X_CW_CONF_PERPACKET_CW_SHIFT;
- reg |= RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT;
+ reg &= ~RTL818X_CW_CONF_PERPACKET_CW;
+ reg |= RTL818X_CW_CONF_PERPACKET_RETRY;
rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg);
reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL);
- reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT;
- reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT;
+ reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN;
+ reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL;
reg &= ~RTL818X_TX_AGC_CTL_FEEDBACK_ANT;
rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg);
diff --git a/drivers/net/wireless/rtl818x/rtl818x.h b/drivers/net/wireless/rtl818x/rtl818x.h
index ce23dfd..fa7f7f6 100644
--- a/drivers/net/wireless/rtl818x/rtl818x.h
+++ b/drivers/net/wireless/rtl818x/rtl818x.h
@@ -144,9 +144,9 @@ struct rtl818x_csr {
__le32 HSSI_PARA;
u8 reserved_13[4];
u8 TX_AGC_CTL;
-#define RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT (1 << 0)
-#define RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT (1 << 1)
-#define RTL818X_TX_AGC_CTL_FEEDBACK_ANT (1 << 2)
+#define RTL818X_TX_AGC_CTL_PERPACKET_GAIN (1 << 0)
+#define RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL (1 << 1)
+#define RTL818X_TX_AGC_CTL_FEEDBACK_ANT (1 << 2)
u8 TX_GAIN_CCK;
u8 TX_GAIN_OFDM;
u8 TX_ANTENNA;
@@ -158,8 +158,8 @@ struct rtl818x_csr {
u8 SLOT;
u8 reserved_16[5];
u8 CW_CONF;
-#define RTL818X_CW_CONF_PERPACKET_CW_SHIFT (1 << 0)
-#define RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT (1 << 1)
+#define RTL818X_CW_CONF_PERPACKET_CW (1 << 0)
+#define RTL818X_CW_CONF_PERPACKET_RETRY (1 << 1)
u8 CW_VAL;
u8 RATE_FALLBACK;
#define RTL818X_RATE_FALLBACK_ENABLE (1 << 7)
--
1.8.3.2