This patchset reduces frequency of a strange HW bug
in CUS232 boards.
The bug happens in some workloads with different
frequency with different hardware spinoffs. It is
triggered by a cold reset after HW/FW has been
excercised with some work. On x86 this could be a hang,
on AP135 it is a data bus error. Frequency of problem
is reduced in driver by calling first warm reset
instead of cold reset. When warm reset fails then
driver will call cold reset.
Marek Puzyniak (2):
ath10k: refactor suspend/resume functions
ath10k: suspend hardware before reset
Michal Kazior (1):
ath10k: fix device initialization routine
drivers/net/wireless/ath/ath10k/core.c | 30 +++++++-
drivers/net/wireless/ath/ath10k/core.h | 4 +-
drivers/net/wireless/ath/ath10k/hw.h | 6 ++
drivers/net/wireless/ath/ath10k/mac.c | 43 ++++++-----
drivers/net/wireless/ath/ath10k/pci.c | 134 +++++++++++++++++++++++++++++++--
drivers/net/wireless/ath/ath10k/wmi.c | 4 +-
drivers/net/wireless/ath/ath10k/wmi.h | 2 +-
7 files changed, 187 insertions(+), 36 deletions(-)
--
1.8.1.2
In case of warm reset target need to be suspended.
Suspend function is extented to handle both cases
with disabling interrupts and without disabling interrupts.
Warm target reset requires suspend with all interrupts
disabled.
This patch depends on
ath10k: fix device initialization routine
Signed-off-by: Marek Puzyniak <[email protected]>
---
drivers/net/wireless/ath/ath10k/core.c | 24 ++++++++++++++++++++++++
drivers/net/wireless/ath/ath10k/core.h | 1 +
drivers/net/wireless/ath/ath10k/mac.c | 14 +++-----------
drivers/net/wireless/ath/ath10k/wmi.c | 4 ++--
drivers/net/wireless/ath/ath10k/wmi.h | 2 +-
5 files changed, 31 insertions(+), 14 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 0d161cf..ebc5fc2 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -858,10 +858,34 @@ err:
}
EXPORT_SYMBOL(ath10k_core_start);
+int ath10k_wait_for_suspend(struct ath10k *ar, u32 suspend_opt)
+{
+ int ret;
+
+ reinit_completion(&ar->target_suspend);
+
+ ret = ath10k_wmi_pdev_suspend_target(ar, suspend_opt);
+ if (ret) {
+ ath10k_warn("could not suspend target (%d)\n", ret);
+ return ret;
+ }
+
+ ret = wait_for_completion_timeout(&ar->target_suspend, 1 * HZ);
+
+ if (ret == 0) {
+ ath10k_warn("suspend timed out - target pause event never came\n");
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
void ath10k_core_stop(struct ath10k *ar)
{
lockdep_assert_held(&ar->conf_mutex);
+ /* try to suspend target */
+ ath10k_wait_for_suspend(ar, WMI_PDEV_SUSPEND_AND_DISABLE_INTR);
ath10k_debug_stop(ar);
ath10k_htc_stop(&ar->htc);
ath10k_htt_detach(&ar->htt);
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 4f7ff9b..fae53f9 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -492,6 +492,7 @@ struct ath10k *ath10k_core_create(void *hif_priv, struct device *dev,
void ath10k_core_destroy(struct ath10k *ar);
int ath10k_core_start(struct ath10k *ar);
+int ath10k_wait_for_suspend(struct ath10k *ar, u32 suspend_opt);
void ath10k_core_stop(struct ath10k *ar);
int ath10k_core_register(struct ath10k *ar, u32 chip_id);
void ath10k_core_unregister(struct ath10k *ar);
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 751284b..90a9ef6 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -3442,22 +3442,14 @@ static int ath10k_suspend(struct ieee80211_hw *hw,
mutex_lock(&ar->conf_mutex);
- reinit_completion(&ar->target_suspend);
-
- ret = ath10k_wmi_pdev_suspend_target(ar);
+ ret = ath10k_wait_for_suspend(ar, WMI_PDEV_SUSPEND);
if (ret) {
- ath10k_warn("could not suspend target (%d)\n", ret);
+ if (ret == -ETIMEDOUT)
+ goto resume;
ret = 1;
goto exit;
}
- ret = wait_for_completion_timeout(&ar->target_suspend, 1 * HZ);
-
- if (ret == 0) {
- ath10k_warn("suspend timed out - target pause event never came\n");
- goto resume;
- }
-
ret = ath10k_hif_suspend(ar);
if (ret) {
ath10k_warn("could not suspend hif (%d)\n", ret);
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 7298c06..cf8dc13 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -2443,7 +2443,7 @@ int ath10k_wmi_pdev_set_channel(struct ath10k *ar,
ar->wmi.cmd->pdev_set_channel_cmdid);
}
-int ath10k_wmi_pdev_suspend_target(struct ath10k *ar)
+int ath10k_wmi_pdev_suspend_target(struct ath10k *ar, u32 suspend_opt)
{
struct wmi_pdev_suspend_cmd *cmd;
struct sk_buff *skb;
@@ -2453,7 +2453,7 @@ int ath10k_wmi_pdev_suspend_target(struct ath10k *ar)
return -ENOMEM;
cmd = (struct wmi_pdev_suspend_cmd *)skb->data;
- cmd->suspend_opt = WMI_PDEV_SUSPEND;
+ cmd->suspend_opt = __cpu_to_le32(suspend_opt);
return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->pdev_suspend_cmdid);
}
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 083079f..fc1093a 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -4193,7 +4193,7 @@ int ath10k_wmi_wait_for_unified_ready(struct ath10k *ar);
int ath10k_wmi_connect_htc_service(struct ath10k *ar);
int ath10k_wmi_pdev_set_channel(struct ath10k *ar,
const struct wmi_channel_arg *);
-int ath10k_wmi_pdev_suspend_target(struct ath10k *ar);
+int ath10k_wmi_pdev_suspend_target(struct ath10k *ar, u32 suspend_opt);
int ath10k_wmi_pdev_resume_target(struct ath10k *ar);
int ath10k_wmi_pdev_set_regdomain(struct ath10k *ar, u16 rd, u16 rd2g,
u16 rd5g, u16 ctl2g, u16 ctl5g);
--
1.8.1.2
From: Michal Kazior <[email protected]>
Hardware CUS232 version 2 has some issues with cold
reset that lead to Data Bus Errors or system hangs
in some cases. It's safer to use warm reset when
possible as it shouldn't trigger the
aforementioned issues.
Prefer warm reset over cold reset. However since
warm reset doesn't work after FW crash make sure to
fallback to cold reset when booting up the HW.
Signed-off-by: Michal Kazior <[email protected]>
Signed-off-by: Marek Puzyniak <[email protected]>
---
drivers/net/wireless/ath/ath10k/hw.h | 6 ++
drivers/net/wireless/ath/ath10k/pci.c | 134 ++++++++++++++++++++++++++++++++--
2 files changed, 133 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index f1505a2..35fc44e 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -205,8 +205,11 @@ enum ath10k_mcast2ucast_mode {
#define WLAN_ANALOG_INTF_PCIE_BASE_ADDRESS 0x0006c000
#define PCIE_LOCAL_BASE_ADDRESS 0x00080000
+#define SOC_RESET_CONTROL_ADDRESS 0x00000000
#define SOC_RESET_CONTROL_OFFSET 0x00000000
#define SOC_RESET_CONTROL_SI0_RST_MASK 0x00000001
+#define SOC_RESET_CONTROL_CE_RST_MASK 0x00040000
+#define SOC_RESET_CONTROL_CPU_WARM_RST_MASK 0x00000040
#define SOC_CPU_CLOCK_OFFSET 0x00000020
#define SOC_CPU_CLOCK_STANDARD_LSB 0
#define SOC_CPU_CLOCK_STANDARD_MASK 0x00000003
@@ -216,6 +219,8 @@ enum ath10k_mcast2ucast_mode {
#define SOC_LPO_CAL_OFFSET 0x000000e0
#define SOC_LPO_CAL_ENABLE_LSB 20
#define SOC_LPO_CAL_ENABLE_MASK 0x00100000
+#define SOC_LF_TIMER_CONTROL0_ADDRESS 0x00000050
+#define SOC_LF_TIMER_CONTROL0_ENABLE_MASK 0x00000004
#define SOC_CHIP_ID_ADDRESS 0x000000ec
#define SOC_CHIP_ID_REV_LSB 8
@@ -273,6 +278,7 @@ enum ath10k_mcast2ucast_mode {
#define PCIE_INTR_CAUSE_ADDRESS 0x000c
#define PCIE_INTR_CLR_ADDRESS 0x0014
#define SCRATCH_3_ADDRESS 0x0030
+#define CPU_INTR_ADDRESS 0x0010
/* Firmware indications to the Host via SCRATCH_3 register. */
#define FW_INDICATOR_ADDRESS (SOC_CORE_BASE_ADDRESS + SCRATCH_3_ADDRESS)
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 9179c88..486412b9 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -64,7 +64,8 @@ static int ath10k_pci_post_rx_pipe(struct ath10k_pci_pipe *pipe_info,
int num);
static void ath10k_pci_rx_pipe_cleanup(struct ath10k_pci_pipe *pipe_info);
static void ath10k_pci_stop_ce(struct ath10k *ar);
-static int ath10k_pci_device_reset(struct ath10k *ar);
+static int ath10k_pci_cold_reset(struct ath10k *ar);
+static int ath10k_pci_warm_reset(struct ath10k *ar);
static int ath10k_pci_wait_for_target_init(struct ath10k *ar);
static int ath10k_pci_init_irq(struct ath10k *ar);
static int ath10k_pci_deinit_irq(struct ath10k *ar);
@@ -1500,7 +1501,7 @@ static void ath10k_pci_hif_stop(struct ath10k *ar)
* configuration during init. If ringbuffers are freed and the device
* were to access them this could lead to memory corruption on the
* host. */
- ath10k_pci_device_reset(ar);
+ ath10k_pci_warm_reset(ar);
ar_pci->started = 0;
}
@@ -1991,7 +1992,94 @@ static void ath10k_pci_fw_interrupt_handler(struct ath10k *ar)
ath10k_pci_sleep(ar);
}
-static int ath10k_pci_hif_power_up(struct ath10k *ar)
+static int ath10k_pci_warm_reset(struct ath10k *ar)
+{
+ struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+ int ret = 0;
+ u32 val;
+
+ ath10k_dbg(ATH10K_DBG_BOOT, "boot performing warm chip reset\n");
+
+ ret = ath10k_do_pci_wake(ar);
+ if (ret) {
+ ath10k_err("failed to wake up target: %d\n", ret);
+ return ret;
+ }
+
+ /* debug */
+ val = ath10k_pci_read32(ar, SOC_CORE_BASE_ADDRESS +
+ PCIE_INTR_CAUSE_ADDRESS);
+ ath10k_dbg(ATH10K_DBG_BOOT, "boot host cpu intr cause: 0x%08x\n", val);
+
+ val = ath10k_pci_read32(ar, SOC_CORE_BASE_ADDRESS +
+ CPU_INTR_ADDRESS);
+ ath10k_dbg(ATH10K_DBG_BOOT, "boot target cpu intr cause: 0x%08x\n",
+ val);
+
+ /* disable pending irqs */
+ ath10k_pci_write32(ar, SOC_CORE_BASE_ADDRESS +
+ PCIE_INTR_ENABLE_ADDRESS, 0);
+
+ ath10k_pci_write32(ar, SOC_CORE_BASE_ADDRESS +
+ PCIE_INTR_CLR_ADDRESS, ~0);
+
+ msleep(100);
+
+ /* clear fw indicator */
+ ath10k_pci_write32(ar, ar_pci->fw_indicator_address, 0);
+
+ /* clear target LF timer interrupts */
+ val = ath10k_pci_read32(ar, RTC_SOC_BASE_ADDRESS +
+ SOC_LF_TIMER_CONTROL0_ADDRESS);
+ ath10k_pci_write32(ar, RTC_SOC_BASE_ADDRESS +
+ SOC_LF_TIMER_CONTROL0_ADDRESS,
+ val & ~SOC_LF_TIMER_CONTROL0_ENABLE_MASK);
+
+ /* reset CE */
+ val = ath10k_pci_read32(ar, RTC_SOC_BASE_ADDRESS +
+ SOC_RESET_CONTROL_ADDRESS);
+ ath10k_pci_write32(ar, RTC_SOC_BASE_ADDRESS + SOC_RESET_CONTROL_ADDRESS,
+ val | SOC_RESET_CONTROL_CE_RST_MASK);
+ val = ath10k_pci_read32(ar, RTC_SOC_BASE_ADDRESS +
+ SOC_RESET_CONTROL_ADDRESS);
+ msleep(10);
+
+ /* unreset CE */
+ ath10k_pci_write32(ar, RTC_SOC_BASE_ADDRESS + SOC_RESET_CONTROL_ADDRESS,
+ val & ~SOC_RESET_CONTROL_CE_RST_MASK);
+ val = ath10k_pci_read32(ar, RTC_SOC_BASE_ADDRESS +
+ SOC_RESET_CONTROL_ADDRESS);
+ msleep(10);
+
+ /* debug */
+ val = ath10k_pci_read32(ar, SOC_CORE_BASE_ADDRESS +
+ PCIE_INTR_CAUSE_ADDRESS);
+ ath10k_dbg(ATH10K_DBG_BOOT, "boot host cpu intr cause: 0x%08x\n", val);
+
+ val = ath10k_pci_read32(ar, SOC_CORE_BASE_ADDRESS +
+ CPU_INTR_ADDRESS);
+ ath10k_dbg(ATH10K_DBG_BOOT, "boot target cpu intr cause: 0x%08x\n",
+ val);
+
+ /* CPU warm reset */
+ val = ath10k_pci_read32(ar, RTC_SOC_BASE_ADDRESS +
+ SOC_RESET_CONTROL_ADDRESS);
+ ath10k_pci_write32(ar, RTC_SOC_BASE_ADDRESS + SOC_RESET_CONTROL_ADDRESS,
+ val | SOC_RESET_CONTROL_CPU_WARM_RST_MASK);
+
+ val = ath10k_pci_read32(ar, RTC_SOC_BASE_ADDRESS +
+ SOC_RESET_CONTROL_ADDRESS);
+ ath10k_dbg(ATH10K_DBG_BOOT, "boot target reset state: 0x%08x\n", val);
+
+ msleep(100);
+
+ ath10k_dbg(ATH10K_DBG_BOOT, "boot warm reset complete\n");
+
+ ath10k_do_pci_sleep(ar);
+ return ret;
+}
+
+static int __ath10k_pci_hif_power_up(struct ath10k *ar, bool cold_reset)
{
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
const char *irq_mode;
@@ -2007,7 +2095,11 @@ static int ath10k_pci_hif_power_up(struct ath10k *ar)
* is in an unexpected state. We try to catch that here in order to
* reset the Target and retry the probe.
*/
- ret = ath10k_pci_device_reset(ar);
+ if (cold_reset)
+ ret = ath10k_pci_cold_reset(ar);
+ else
+ ret = ath10k_pci_warm_reset(ar);
+
if (ret) {
ath10k_err("failed to reset target: %d\n", ret);
goto err;
@@ -2077,7 +2169,7 @@ err_deinit_irq:
ath10k_pci_deinit_irq(ar);
err_ce:
ath10k_pci_ce_deinit(ar);
- ath10k_pci_device_reset(ar);
+ ath10k_pci_warm_reset(ar);
err_ps:
if (!test_bit(ATH10K_PCI_FEATURE_SOC_POWER_SAVE, ar_pci->features))
ath10k_do_pci_sleep(ar);
@@ -2085,6 +2177,34 @@ err:
return ret;
}
+static int ath10k_pci_hif_power_up(struct ath10k *ar)
+{
+ int ret;
+
+ /*
+ * Hardware CUS232 version 2 has some issues with cold reset and the
+ * preferred (and safer) way to perform a device reset is through a
+ * warm reset.
+ *
+ * Warm reset doesn't always work though (notably after a firmware
+ * crash) so fall back to cold reset if necessary.
+ */
+ ret = __ath10k_pci_hif_power_up(ar, false);
+ if (ret) {
+ ath10k_warn("failed to power up target using warm reset (%d), trying cold reset\n",
+ ret);
+
+ ret = __ath10k_pci_hif_power_up(ar, true);
+ if (ret) {
+ ath10k_err("failed to power up target using cold reset too (%d)\n",
+ ret);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
static void ath10k_pci_hif_power_down(struct ath10k *ar)
{
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
@@ -2092,7 +2212,7 @@ static void ath10k_pci_hif_power_down(struct ath10k *ar)
ath10k_pci_free_early_irq(ar);
ath10k_pci_kill_tasklet(ar);
ath10k_pci_deinit_irq(ar);
- ath10k_pci_device_reset(ar);
+ ath10k_pci_warm_reset(ar);
ath10k_pci_ce_deinit(ar);
if (!test_bit(ATH10K_PCI_FEATURE_SOC_POWER_SAVE, ar_pci->features))
@@ -2521,7 +2641,7 @@ out:
return ret;
}
-static int ath10k_pci_device_reset(struct ath10k *ar)
+static int ath10k_pci_cold_reset(struct ath10k *ar)
{
int i, ret;
u32 val;
--
1.8.1.2
Suspend/resume callbacks are not protected by configuration mutex
so adding such protection. Also in order to simplify implemetation
of suspend function wait queue is replaced by completion.
Signed-off-by: Marek Puzyniak <[email protected]>
---
drivers/net/wireless/ath/ath10k/core.c | 6 ++----
drivers/net/wireless/ath/ath10k/core.h | 3 +--
drivers/net/wireless/ath/ath10k/mac.c | 39 ++++++++++++++++++++++------------
3 files changed, 28 insertions(+), 20 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 56048b1..0d161cf 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -55,8 +55,7 @@ static void ath10k_send_suspend_complete(struct ath10k *ar)
{
ath10k_dbg(ATH10K_DBG_BOOT, "boot suspend complete\n");
- ar->is_target_paused = true;
- wake_up(&ar->event_queue);
+ complete(&ar->target_suspend);
}
static int ath10k_init_connect_htc(struct ath10k *ar)
@@ -703,6 +702,7 @@ struct ath10k *ath10k_core_create(void *hif_priv, struct device *dev,
init_completion(&ar->scan.started);
init_completion(&ar->scan.completed);
init_completion(&ar->scan.on_channel);
+ init_completion(&ar->target_suspend);
init_completion(&ar->install_key_done);
init_completion(&ar->vdev_setup_done);
@@ -726,8 +726,6 @@ struct ath10k *ath10k_core_create(void *hif_priv, struct device *dev,
INIT_WORK(&ar->wmi_mgmt_tx_work, ath10k_mgmt_over_wmi_tx_work);
skb_queue_head_init(&ar->wmi_mgmt_tx_queue);
- init_waitqueue_head(&ar->event_queue);
-
INIT_WORK(&ar->restart_work, ath10k_core_restart);
return ar;
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index c0b00e1..4f7ff9b 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -375,8 +375,7 @@ struct ath10k {
const struct ath10k_hif_ops *ops;
} hif;
- wait_queue_head_t event_queue;
- bool is_target_paused;
+ struct completion target_suspend;
struct ath10k_bmi bmi;
struct ath10k_wmi wmi;
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 144b4d6..751284b 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -3440,21 +3440,20 @@ static int ath10k_suspend(struct ieee80211_hw *hw,
struct ath10k *ar = hw->priv;
int ret;
- ar->is_target_paused = false;
+ mutex_lock(&ar->conf_mutex);
+
+ reinit_completion(&ar->target_suspend);
ret = ath10k_wmi_pdev_suspend_target(ar);
if (ret) {
ath10k_warn("could not suspend target (%d)\n", ret);
- return 1;
+ ret = 1;
+ goto exit;
}
- ret = wait_event_interruptible_timeout(ar->event_queue,
- ar->is_target_paused == true,
- 1 * HZ);
- if (ret < 0) {
- ath10k_warn("suspend interrupted (%d)\n", ret);
- goto resume;
- } else if (ret == 0) {
+ ret = wait_for_completion_timeout(&ar->target_suspend, 1 * HZ);
+
+ if (ret == 0) {
ath10k_warn("suspend timed out - target pause event never came\n");
goto resume;
}
@@ -3465,12 +3464,17 @@ static int ath10k_suspend(struct ieee80211_hw *hw,
goto resume;
}
- return 0;
+ ret = 0;
+ goto exit;
resume:
ret = ath10k_wmi_pdev_resume_target(ar);
if (ret)
ath10k_warn("could not resume target (%d)\n", ret);
- return 1;
+
+ ret = 1;
+exit:
+ mutex_unlock(&ar->conf_mutex);
+ return ret;
}
static int ath10k_resume(struct ieee80211_hw *hw)
@@ -3478,19 +3482,26 @@ static int ath10k_resume(struct ieee80211_hw *hw)
struct ath10k *ar = hw->priv;
int ret;
+ mutex_lock(&ar->conf_mutex);
+
ret = ath10k_hif_resume(ar);
if (ret) {
ath10k_warn("could not resume hif (%d)\n", ret);
- return 1;
+ ret = 1;
+ goto exit;
}
ret = ath10k_wmi_pdev_resume_target(ar);
if (ret) {
ath10k_warn("could not resume target (%d)\n", ret);
- return 1;
+ ret = 1;
+ goto exit;
}
- return 0;
+ ret = 0;
+exit:
+ mutex_unlock(&ar->conf_mutex);
+ return ret;
}
#endif
--
1.8.1.2
Marek Puzyniak <[email protected]> writes:
> This patchset reduces frequency of a strange HW bug
> in CUS232 boards.
>
> The bug happens in some workloads with different
> frequency with different hardware spinoffs. It is
> triggered by a cold reset after HW/FW has been
> excercised with some work. On x86 this could be a hang,
> on AP135 it is a data bus error. Frequency of problem
> is reduced in driver by calling first warm reset
> instead of cold reset. When warm reset fails then
> driver will call cold reset.
>
> Marek Puzyniak (2):
> ath10k: refactor suspend/resume functions
> ath10k: suspend hardware before reset
>
> Michal Kazior (1):
> ath10k: fix device initialization routine
Thanks, all three patches applied.
--
Kalle Valo