Some additional documentation fixes.
------
As before, this series addresses the option of enabling additional channels for
use based on the following relaxations:
1. Indoor operation, where a device can use channels requiring indoor
operation, subject to that it can guarantee indoor operation.
2. Concurrent GO operation, where devices may instantiate a P2P GO
while they are under the guidance of an authorized master.
The series includes:
* Some clarification (mainly in documentation) about the intended usage of
channels marked as INDOOR_ONLY and CONCURRENT GO.
* Mapping of NL80211_RFF_NO_OUTDOOR to NL80211_CHAN_INDOOR_ONLY
* Support for a user hint that the platform is operating in an indoor
environment, i.e., channel marked as INDOOR_ONLY can be used.
* Allow initiating radiation on channel marked with INDOOR_ONLY also
for scanning an frame injection in monitor mode.
* Some additional fixes for comments I got.
Following is an example of a possible channel map that can be used to allow
the INDOOR_ONLY and CONCURRENT_GO relaxations. Note that:
* Channels 12,13 are marked as Concurrent GO, so even in the lack of exact
information about the current regulatory domain, these channels can be used
for GO instantiation based on the concurrent GO relaxation.
* The above is also true for channels 149-165 (a.k.a U-NII 3).
* Channels 36-48 (a.k.a thee U-NII 1), are marked both with Concurrent GO and
indoor only. While the Concurrent GO can be used as described above, the
indoor only setting allows to use these channels given the platform is
identified as an indoor one, i.e., media server.
2412 MHz [1] (16.0 dBm)
2417 MHz [2] (16.0 dBm)
2422 MHz [3] (16.0 dBm)
2427 MHz [4] (16.0 dBm)
2432 MHz [5] (16.0 dBm)
2437 MHz [6] (16.0 dBm)
2442 MHz [7] (16.0 dBm)
2447 MHz [8] (16.0 dBm)
2452 MHz [9] (16.0 dBm)
2457 MHz [10] (16.0 dBm)
2462 MHz [11] (16.0 dBm)
2467 MHz [12] (16.0 dBm) (no IR, Concurrent GO)
2472 MHz [13] (16.0 dBm) (no IR, Concurrent GO)
5180 MHz [36] (16.0 dBm) (no IR, Indoor Only, Concurrent GO)
5200 MHz [40] (16.0 dBm) (no IR, Indoor Only, Concurrent GO)
5220 MHz [44] (16.0 dBm) (no IR, Indoor Only, Concurrent GO)
5240 MHz [48] (16.0 dBm) (no IR, Indoor Only, Concurrent GO)
5260 MHz [52] (16.0 dBm) (no IR, radar detection)
5280 MHz [56] (16.0 dBm) (no IR, radar detection)
5300 MHz [60] (16.0 dBm) (no IR, radar detection)
5320 MHz [64] (16.0 dBm) (no IR, radar detection)
5500 MHz [100] (16.0 dBm) (no IR, radar detection)
5520 MHz [104] (16.0 dBm) (no IR, radar detection)
5540 MHz [108] (16.0 dBm) (no IR, radar detection)
5560 MHz [112] (16.0 dBm) (no IR, radar detection)
5580 MHz [116] (16.0 dBm) (no IR, radar detection)
5600 MHz [120] (16.0 dBm) (no IR, radar detection)
5620 MHz [124] (16.0 dBm) (no IR, radar detection)
5640 MHz [128] (16.0 dBm) (no IR, radar detection)
5660 MHz [132] (16.0 dBm) (no IR, radar detection)
5680 MHz [136] (16.0 dBm) (no IR, radar detection)
5700 MHz [140] (16.0 dBm) (no IR, radar detection)
5720 MHz [144] (16.0 dBm) (no IR, radar detection)
5745 MHz [149] (16.0 dBm) (no IR, Concurrent GO)
5765 MHz [153] (16.0 dBm) (no IR, Concurrent GO)
5785 MHz [157] (16.0 dBm) (no IR, Concurrent GO)
5805 MHz [161] (16.0 dBm) (no IR, Concurrent GO)
5825 MHz [165] (16.0 dBm) (no IR, Concurrent GO)
Thanks in advance,
Ilan.
David Spinadel (1):
cfg80211: Add indoor only and GO concurrent channel attributes
Ilan Peer (4):
cfg80211: Add Kconfig option for cellular BS hints
cfg80211: Enable GO operation on additional channels
cfg80211: Add an option to hint indoor operation
cfg80211: Enable GO operation on indoor channels
include/net/cfg80211.h | 14 +++++-
include/net/regulatory.h | 6 +++
include/uapi/linux/nl80211.h | 26 ++++++++++++
net/mac80211/ibss.c | 9 ++--
net/wireless/Kconfig | 37 ++++++++++++++++
net/wireless/chan.c | 84 ++++++++++++++++++++++++++++++++++--
net/wireless/mesh.c | 3 +-
net/wireless/nl80211.c | 35 ++++++++-------
net/wireless/reg.c | 96 +++++++++++++++++++++++++++++++++++++++++-
net/wireless/reg.h | 13 ++++++
net/wireless/trace.h | 11 +++--
11 files changed, 305 insertions(+), 29 deletions(-)
--
1.7.10.4
Add the option to hint the wireless core that it is operating in an indoor
environment.
Signed-off-by: Ilan Peer <[email protected]>
---
include/uapi/linux/nl80211.h | 3 ++
net/wireless/nl80211.c | 18 +++++-------
net/wireless/reg.c | 63 +++++++++++++++++++++++++++++++++++++++++-
net/wireless/reg.h | 6 ++++
4 files changed, 78 insertions(+), 12 deletions(-)
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 061f8d4..42710e5 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -2583,10 +2583,13 @@ enum nl80211_dfs_regions {
* present has been registered with the wireless core that
* has listed NL80211_FEATURE_CELL_BASE_REG_HINTS as a
* supported feature.
+ * @NL80211_USER_REG_HINT_INDOOR: a user sent an hint indicating that the
+ * platform is operating in an indoor environment.
*/
enum nl80211_user_reg_hint_type {
NL80211_USER_REG_HINT_USER = 0,
NL80211_USER_REG_HINT_CELL_BASE = 1,
+ NL80211_USER_REG_HINT_INDOOR = 2,
};
/**
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 2270d9b..50826a9 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -4659,7 +4659,6 @@ static int parse_reg_rule(struct nlattr *tb[],
static int nl80211_req_set_reg(struct sk_buff *skb, struct genl_info *info)
{
- int r;
char *data = NULL;
enum nl80211_user_reg_hint_type user_reg_hint_type;
@@ -4672,11 +4671,6 @@ static int nl80211_req_set_reg(struct sk_buff *skb, struct genl_info *info)
if (unlikely(!rcu_access_pointer(cfg80211_regdomain)))
return -EINPROGRESS;
- if (!info->attrs[NL80211_ATTR_REG_ALPHA2])
- return -EINVAL;
-
- data = nla_data(info->attrs[NL80211_ATTR_REG_ALPHA2]);
-
if (info->attrs[NL80211_ATTR_USER_REG_HINT_TYPE])
user_reg_hint_type =
nla_get_u32(info->attrs[NL80211_ATTR_USER_REG_HINT_TYPE]);
@@ -4686,14 +4680,16 @@ static int nl80211_req_set_reg(struct sk_buff *skb, struct genl_info *info)
switch (user_reg_hint_type) {
case NL80211_USER_REG_HINT_USER:
case NL80211_USER_REG_HINT_CELL_BASE:
- break;
+ if (!info->attrs[NL80211_ATTR_REG_ALPHA2])
+ return -EINVAL;
+
+ data = nla_data(info->attrs[NL80211_ATTR_REG_ALPHA2]);
+ return regulatory_hint_user(data, user_reg_hint_type);
+ case NL80211_USER_REG_HINT_INDOOR:
+ return regulatory_hint_indoor_user();
default:
return -EINVAL;
}
-
- r = regulatory_hint_user(data, user_reg_hint_type);
-
- return r;
}
static int nl80211_get_mesh_config(struct sk_buff *skb,
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 85aa847..8c9d25a 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -65,11 +65,26 @@
#define REG_DBG_PRINT(args...)
#endif
+/**
+ * enum reg_request_treatment - regulatory request treatment
+ *
+ * @REG_REQ_OK: continue processing the regulatory request
+ * @REG_REQ_IGNORE: ignore the regulatory request
+ * @REG_REQ_INTERSECT: the regulatory domain resulting from this request should
+ * be intersected with the current one.
+ * @REG_REQ_ALREADY_SET: the regulatory request will not change the current
+ * regulatory settings, and no further processing is required.
+ * @REG_REQ_USER_HINT_HANDLED: a non alpha2 user hint was handled and no
+ * further processing is required, i.e., not need to update last_request
+ * etc. This should be used for user hints that do not provide an alpha2
+ * but some other type of regulatory hint, i.e., indoor operation.
+ */
enum reg_request_treatment {
REG_REQ_OK,
REG_REQ_IGNORE,
REG_REQ_INTERSECT,
REG_REQ_ALREADY_SET,
+ REG_REQ_USER_HINT_HANDLED,
};
static struct regulatory_request core_request_world = {
@@ -110,6 +125,14 @@ const struct ieee80211_regdomain __rcu *cfg80211_regdomain;
*/
static int reg_num_devs_support_basehint;
+/*
+ * State variable indicating if the platform on which the devices
+ * are attached is operating in an indoor environment. The state variable
+ * is relevant for all registered devices.
+ * (protected by RTNL)
+ */
+static bool reg_is_indoor;
+
static const struct ieee80211_regdomain *get_cfg80211_regdom(void)
{
return rtnl_dereference(cfg80211_regdomain);
@@ -1104,6 +1127,13 @@ static bool reg_request_cell_base(struct regulatory_request *request)
return request->user_reg_hint_type == NL80211_USER_REG_HINT_CELL_BASE;
}
+static bool reg_request_indoor(struct regulatory_request *request)
+{
+ if (request->initiator != NL80211_REGDOM_SET_BY_USER)
+ return false;
+ return request->user_reg_hint_type == NL80211_USER_REG_HINT_INDOOR;
+}
+
bool reg_last_request_cell_base(void)
{
return reg_request_cell_base(get_last_request());
@@ -1546,6 +1576,11 @@ __reg_process_hint_user(struct regulatory_request *user_request)
{
struct regulatory_request *lr = get_last_request();
+ if (reg_request_indoor(user_request)) {
+ reg_is_indoor = true;
+ return REG_REQ_USER_HINT_HANDLED;
+ }
+
if (reg_request_cell_base(user_request))
return reg_ignore_cell_hint(user_request);
@@ -1593,7 +1628,8 @@ reg_process_hint_user(struct regulatory_request *user_request)
treatment = __reg_process_hint_user(user_request);
if (treatment == REG_REQ_IGNORE ||
- treatment == REG_REQ_ALREADY_SET) {
+ treatment == REG_REQ_ALREADY_SET ||
+ treatment == REG_REQ_USER_HINT_HANDLED) {
kfree(user_request);
return treatment;
}
@@ -1654,6 +1690,7 @@ reg_process_hint_driver(struct wiphy *wiphy,
case REG_REQ_OK:
break;
case REG_REQ_IGNORE:
+ case REG_REQ_USER_HINT_HANDLED:
kfree(driver_request);
return treatment;
case REG_REQ_INTERSECT:
@@ -1753,6 +1790,7 @@ reg_process_hint_country_ie(struct wiphy *wiphy,
case REG_REQ_OK:
break;
case REG_REQ_IGNORE:
+ case REG_REQ_USER_HINT_HANDLED:
/* fall through */
case REG_REQ_ALREADY_SET:
kfree(country_ie_request);
@@ -1945,6 +1983,22 @@ int regulatory_hint_user(const char *alpha2,
return 0;
}
+int regulatory_hint_indoor_user(void)
+{
+ struct regulatory_request *request;
+
+ request = kzalloc(sizeof(struct regulatory_request), GFP_KERNEL);
+ if (!request)
+ return -ENOMEM;
+
+ request->wiphy_idx = WIPHY_IDX_INVALID;
+ request->initiator = NL80211_REGDOM_SET_BY_USER;
+ request->user_reg_hint_type = NL80211_USER_REG_HINT_INDOOR;
+ queue_regulatory_request(request);
+
+ return 0;
+}
+
/* Driver hints */
int regulatory_hint(struct wiphy *wiphy, const char *alpha2)
{
@@ -2112,6 +2166,8 @@ static void restore_regulatory_settings(bool reset_user)
ASSERT_RTNL();
+ reg_is_indoor = false;
+
reset_regdomains(true, &world_regdom);
restore_alpha2(alpha2, reset_user);
@@ -2626,6 +2682,11 @@ int cfg80211_get_unii(int freq)
return -EINVAL;
}
+bool regulatory_indoor_allowed(void)
+{
+ return reg_is_indoor;
+}
+
int __init regulatory_init(void)
{
int err = 0;
diff --git a/net/wireless/reg.h b/net/wireless/reg.h
index 9c11e72..a4ed27a 100644
--- a/net/wireless/reg.h
+++ b/net/wireless/reg.h
@@ -25,6 +25,7 @@ enum nl80211_dfs_regions reg_get_dfs_region(struct wiphy *wiphy);
int regulatory_hint_user(const char *alpha2,
enum nl80211_user_reg_hint_type user_reg_hint_type);
+int regulatory_hint_indoor_user(void);
int reg_device_uevent(struct device *dev, struct kobj_uevent_env *env);
void wiphy_regulatory_register(struct wiphy *wiphy);
@@ -117,4 +118,9 @@ void regulatory_hint_disconnect(void);
*/
int cfg80211_get_unii(int freq);
+/**
+ * regulatory_indoor_allowed - is indoor operation allowed
+ */
+bool regulatory_indoor_allowed(void);
+
#endif /* __NET_WIRELESS_REG_H */
--
1.7.10.4
Move the regulatory cellular base station hints support under
a specific configuration option and make the option depend
on CFG80211_CERTIFICATION_ONUS.
Signed-off-by: Ilan Peer <[email protected]>
---
net/wireless/Kconfig | 13 +++++++++++++
net/wireless/reg.c | 2 +-
2 files changed, 14 insertions(+), 1 deletion(-)
diff --git a/net/wireless/Kconfig b/net/wireless/Kconfig
index 16d08b3..2a891bc 100644
--- a/net/wireless/Kconfig
+++ b/net/wireless/Kconfig
@@ -95,6 +95,19 @@ config CFG80211_CERTIFICATION_ONUS
you are a wireless researcher and are working in a controlled
and approved environment by your local regulatory agency.
+config CFG80211_REG_CELLULAR_HINTS
+ bool "cfg80211 regulatory support for cellular base station hints"
+ depends on CFG80211_CERTIFICATION_ONUS
+ ---help---
+ This option enables support for parsing regulatory hints
+ from cellular base stations. If enabled and at least one driver
+ claims support for parsing cellular base station hints the
+ regulatory core will allow and parse these regulatory hints.
+ The regulatory core will only apply these regulatory hints on
+ drivers that support this feature. You should only enable this
+ feature if you have tested and validated this feature on your
+ systems.
+
config CFG80211_DEFAULT_PS
bool "enable powersave by default"
depends on CFG80211
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 6cdf3cc..97af820 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -1109,7 +1109,7 @@ bool reg_last_request_cell_base(void)
return reg_request_cell_base(get_last_request());
}
-#ifdef CONFIG_CFG80211_CERTIFICATION_ONUS
+#ifdef CONFIG_CFG80211_REG_CELLULAR_HINTS
/* Core specific check */
static enum reg_request_treatment
reg_ignore_cell_hint(struct regulatory_request *pending_request)
--
1.7.10.4
From: David Spinadel <[email protected]>
The FCC are clarifying some soft configuration requirements,
which among other include the following:
1. Indoor operation, where a device can use channels requiring indoor
operation, subject to that it can guarantee indoor operation,
i.e., the device is connected to AC Power or the device is under
the control of a local master that is acting as an AP and is
connected to AC Power.
2. Concurrent GO operation, where devices may instantiate a P2P GO
while they are under the guidance of an authorized master. For example,
on a channel on which a BSS is connected to an authorized master, i.e.,
with DFS and radar detection capability in the UNII band.
See https://apps.fcc.gov/eas/comments/GetPublishedDocument.html?id=327&tn=528122
Add support for advertising Indoor-only and GO-Concurrent channel
properties.
Signed-off-by: David Spinadel <[email protected]>
Signed-off-by: Ilan Peer <[email protected]>
---
include/net/cfg80211.h | 5 +++++
include/uapi/linux/nl80211.h | 23 +++++++++++++++++++++++
net/wireless/nl80211.c | 6 ++++++
net/wireless/reg.c | 2 ++
4 files changed, 36 insertions(+)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 9f90554..2ba017c 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -109,6 +109,9 @@ enum ieee80211_band {
* channel as the control or any of the secondary channels.
* This may be due to the driver or due to regulatory bandwidth
* restrictions.
+ * @IEEE80211_CHAN_INDOOR_ONLY: see %NL80211_FREQUENCY_ATTR_INDOOR_ONLY
+ * @IEEE80211_CHAN_GO_CONCURRENT: see %NL80211_FREQUENCY_ATTR_GO_CONCURRENT
+ *
*/
enum ieee80211_channel_flags {
IEEE80211_CHAN_DISABLED = 1<<0,
@@ -120,6 +123,8 @@ enum ieee80211_channel_flags {
IEEE80211_CHAN_NO_OFDM = 1<<6,
IEEE80211_CHAN_NO_80MHZ = 1<<7,
IEEE80211_CHAN_NO_160MHZ = 1<<8,
+ IEEE80211_CHAN_INDOOR_ONLY = 1<<9,
+ IEEE80211_CHAN_GO_CONCURRENT = 1<<10,
};
#define IEEE80211_CHAN_NO_HT40 \
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index a12e6ca..061f8d4 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -2329,9 +2329,30 @@ enum nl80211_band_attr {
* @NL80211_FREQUENCY_ATTR_NO_160MHZ: any 160 MHz (but not 80+80) channel
* using this channel as the primary or any of the secondary channels
* isn't possible
+ * @NL80211_FREQUENCY_ATTR_INDOOR_ONLY: Only indoor use is permitted on this
+ * channel. A channel that has the INDOOR_ONLY attribute can only be
+ * used when there is a clear assessment that the device is operating in
+ * an indoor surroundings, i.e., it is connected to AC power (and not
+ * through portable DC inverters) or is under the control of a master
+ * that is acting as an AP and is connected to AC power.
+ * @NL80211_FREQUENCY_ATTR_GO_CONCURRENT: GO operation is allowed on this
+ * channel if it's connected concurrently to a BSS on the same channel on
+ * the 2 GHz band or to a channel in the same UNII band (on the 5 GHz
+ * band), and IEEE80211_CHAN_RADAR is not set. Instantiating a GO on a
+ * channel that has the GO_CONCURRENT attribute set can be done when there
+ * is a clear assessment that the device is operating under the guidance of
+ * an authorized master, i.e., setting up a GO while the device is also
+ * connected to an AP with DFS and radar detection on the UNII band (it is
+ * up to user-space, i.e., wpa_supplicant to perform the required
+ * verifications)
* @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
* currently defined
* @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
+ *
+ * See https://apps.fcc.gov/eas/comments/GetPublishedDocument.html?id=327&tn=528122
+ * for more information on the FCC description of the relaxations allowed
+ * by NL80211_FREQUENCY_ATTR_INDOOR_ONLY and
+ * NL80211_FREQUENCY_ATTR_GO_CONCURRENT.
*/
enum nl80211_frequency_attr {
__NL80211_FREQUENCY_ATTR_INVALID,
@@ -2347,6 +2368,8 @@ enum nl80211_frequency_attr {
NL80211_FREQUENCY_ATTR_NO_HT40_PLUS,
NL80211_FREQUENCY_ATTR_NO_80MHZ,
NL80211_FREQUENCY_ATTR_NO_160MHZ,
+ NL80211_FREQUENCY_ATTR_INDOOR_ONLY,
+ NL80211_FREQUENCY_ATTR_GO_CONCURRENT,
/* keep last */
__NL80211_FREQUENCY_ATTR_AFTER_LAST,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 8e6b6a2..95a8c72 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -608,6 +608,12 @@ static int nl80211_msg_put_channel(struct sk_buff *msg,
if ((chan->flags & IEEE80211_CHAN_NO_160MHZ) &&
nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_160MHZ))
goto nla_put_failure;
+ if ((chan->flags & IEEE80211_CHAN_INDOOR_ONLY) &&
+ nla_put_flag(msg, NL80211_FREQUENCY_ATTR_INDOOR_ONLY))
+ goto nla_put_failure;
+ if ((chan->flags & IEEE80211_CHAN_GO_CONCURRENT) &&
+ nla_put_flag(msg, NL80211_FREQUENCY_ATTR_GO_CONCURRENT))
+ goto nla_put_failure;
}
if (nla_put_u32(msg, NL80211_FREQUENCY_ATTR_MAX_TX_POWER,
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index cb7ade9..6cdf3cc 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -867,6 +867,8 @@ static u32 map_regdom_flags(u32 rd_flags)
channel_flags |= IEEE80211_CHAN_RADAR;
if (rd_flags & NL80211_RRF_NO_OFDM)
channel_flags |= IEEE80211_CHAN_NO_OFDM;
+ if (rd_flags & NL80211_RRF_NO_OUTDOOR)
+ channel_flags |= IEEE80211_CHAN_INDOOR_ONLY;
return channel_flags;
}
--
1.7.10.4
Allow GO operation on a channel marked with IEEE80211_CHAN_INDOOR_ONLY
iff there is a user hint indicating that the platform is operating in
an indoor environment, i.e., the platform is a printer or media center
device.
Signed-off-by: Ilan Peer <[email protected]>
---
net/wireless/chan.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/net/wireless/chan.c b/net/wireless/chan.c
index cc255eb..62c0e29 100644
--- a/net/wireless/chan.c
+++ b/net/wireless/chan.c
@@ -611,6 +611,8 @@ EXPORT_SYMBOL(cfg80211_chandef_usable);
* IEEE80211_CHAN_GO_CONCURRENT and there is an additional station interface
* associated to an AP on the same channel or on the same UNII band
* (assuming that the AP is an authorized master).
+ * In addition allow the GO to operate on a channel on which indoor operation is
+ * allowed, iff we are currently operating in an indoor environment.
*/
static bool cfg80211_go_permissive_chan(struct cfg80211_registered_device *rdev,
struct ieee80211_channel *chan)
@@ -621,8 +623,14 @@ static bool cfg80211_go_permissive_chan(struct cfg80211_registered_device *rdev,
ASSERT_RTNL();
if (!config_enabled(CONFIG_CFG80211_REG_RELAX_NO_IR) ||
- !(wiphy->regulatory_flags & REGULATORY_ENABLE_RELAX_NO_IR) ||
- !(chan->flags & IEEE80211_CHAN_GO_CONCURRENT))
+ !(wiphy->regulatory_flags & REGULATORY_ENABLE_RELAX_NO_IR))
+ return false;
+
+ if (regulatory_indoor_allowed() &&
+ (chan->flags & IEEE80211_CHAN_INDOOR_ONLY))
+ return true;
+
+ if (!(chan->flags & IEEE80211_CHAN_GO_CONCURRENT))
return false;
/*
--
1.7.10.4
Add the option to hint the wireless core that it is operating in an indoor
environment.
Signed-off-by: Ilan Peer <[email protected]>
---
include/net/cfg80211.h | 5 ++++
include/uapi/linux/nl80211.h | 3 ++
net/wireless/nl80211.c | 18 +++++-------
net/wireless/reg.c | 63 +++++++++++++++++++++++++++++++++++++++++-
net/wireless/reg.h | 1 +
5 files changed, 78 insertions(+), 12 deletions(-)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index e872c9c..5c6053c 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -3626,6 +3626,11 @@ const struct ieee80211_reg_rule *freq_reg_info(struct wiphy *wiphy,
*/
const char *reg_initiator_name(enum nl80211_reg_initiator initiator);
+/**
+ * regulatory_indoor_allowed - is indoor operation allowed
+ */
+bool regulatory_indoor_allowed(void);
+
/*
* callbacks for asynchronous cfg80211 methods, notification
* functions and BSS handling helpers
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 061f8d4..42710e5 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -2583,10 +2583,13 @@ enum nl80211_dfs_regions {
* present has been registered with the wireless core that
* has listed NL80211_FEATURE_CELL_BASE_REG_HINTS as a
* supported feature.
+ * @NL80211_USER_REG_HINT_INDOOR: a user sent an hint indicating that the
+ * platform is operating in an indoor environment.
*/
enum nl80211_user_reg_hint_type {
NL80211_USER_REG_HINT_USER = 0,
NL80211_USER_REG_HINT_CELL_BASE = 1,
+ NL80211_USER_REG_HINT_INDOOR = 2,
};
/**
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 2270d9b..50826a9 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -4659,7 +4659,6 @@ static int parse_reg_rule(struct nlattr *tb[],
static int nl80211_req_set_reg(struct sk_buff *skb, struct genl_info *info)
{
- int r;
char *data = NULL;
enum nl80211_user_reg_hint_type user_reg_hint_type;
@@ -4672,11 +4671,6 @@ static int nl80211_req_set_reg(struct sk_buff *skb, struct genl_info *info)
if (unlikely(!rcu_access_pointer(cfg80211_regdomain)))
return -EINPROGRESS;
- if (!info->attrs[NL80211_ATTR_REG_ALPHA2])
- return -EINVAL;
-
- data = nla_data(info->attrs[NL80211_ATTR_REG_ALPHA2]);
-
if (info->attrs[NL80211_ATTR_USER_REG_HINT_TYPE])
user_reg_hint_type =
nla_get_u32(info->attrs[NL80211_ATTR_USER_REG_HINT_TYPE]);
@@ -4686,14 +4680,16 @@ static int nl80211_req_set_reg(struct sk_buff *skb, struct genl_info *info)
switch (user_reg_hint_type) {
case NL80211_USER_REG_HINT_USER:
case NL80211_USER_REG_HINT_CELL_BASE:
- break;
+ if (!info->attrs[NL80211_ATTR_REG_ALPHA2])
+ return -EINVAL;
+
+ data = nla_data(info->attrs[NL80211_ATTR_REG_ALPHA2]);
+ return regulatory_hint_user(data, user_reg_hint_type);
+ case NL80211_USER_REG_HINT_INDOOR:
+ return regulatory_hint_indoor_user();
default:
return -EINVAL;
}
-
- r = regulatory_hint_user(data, user_reg_hint_type);
-
- return r;
}
static int nl80211_get_mesh_config(struct sk_buff *skb,
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 85aa847..8c9d25a 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -65,11 +65,26 @@
#define REG_DBG_PRINT(args...)
#endif
+/**
+ * enum reg_request_treatment - regulatory request treatment
+ *
+ * @REG_REQ_OK: continue processing the regulatory request
+ * @REG_REQ_IGNORE: ignore the regulatory request
+ * @REG_REQ_INTERSECT: the regulatory domain resulting from this request should
+ * be intersected with the current one.
+ * @REG_REQ_ALREADY_SET: the regulatory request will not change the current
+ * regulatory settings, and no further processing is required.
+ * @REG_REQ_USER_HINT_HANDLED: a non alpha2 user hint was handled and no
+ * further processing is required, i.e., not need to update last_request
+ * etc. This should be used for user hints that do not provide an alpha2
+ * but some other type of regulatory hint, i.e., indoor operation.
+ */
enum reg_request_treatment {
REG_REQ_OK,
REG_REQ_IGNORE,
REG_REQ_INTERSECT,
REG_REQ_ALREADY_SET,
+ REG_REQ_USER_HINT_HANDLED,
};
static struct regulatory_request core_request_world = {
@@ -110,6 +125,14 @@ const struct ieee80211_regdomain __rcu *cfg80211_regdomain;
*/
static int reg_num_devs_support_basehint;
+/*
+ * State variable indicating if the platform on which the devices
+ * are attached is operating in an indoor environment. The state variable
+ * is relevant for all registered devices.
+ * (protected by RTNL)
+ */
+static bool reg_is_indoor;
+
static const struct ieee80211_regdomain *get_cfg80211_regdom(void)
{
return rtnl_dereference(cfg80211_regdomain);
@@ -1104,6 +1127,13 @@ static bool reg_request_cell_base(struct regulatory_request *request)
return request->user_reg_hint_type == NL80211_USER_REG_HINT_CELL_BASE;
}
+static bool reg_request_indoor(struct regulatory_request *request)
+{
+ if (request->initiator != NL80211_REGDOM_SET_BY_USER)
+ return false;
+ return request->user_reg_hint_type == NL80211_USER_REG_HINT_INDOOR;
+}
+
bool reg_last_request_cell_base(void)
{
return reg_request_cell_base(get_last_request());
@@ -1546,6 +1576,11 @@ __reg_process_hint_user(struct regulatory_request *user_request)
{
struct regulatory_request *lr = get_last_request();
+ if (reg_request_indoor(user_request)) {
+ reg_is_indoor = true;
+ return REG_REQ_USER_HINT_HANDLED;
+ }
+
if (reg_request_cell_base(user_request))
return reg_ignore_cell_hint(user_request);
@@ -1593,7 +1628,8 @@ reg_process_hint_user(struct regulatory_request *user_request)
treatment = __reg_process_hint_user(user_request);
if (treatment == REG_REQ_IGNORE ||
- treatment == REG_REQ_ALREADY_SET) {
+ treatment == REG_REQ_ALREADY_SET ||
+ treatment == REG_REQ_USER_HINT_HANDLED) {
kfree(user_request);
return treatment;
}
@@ -1654,6 +1690,7 @@ reg_process_hint_driver(struct wiphy *wiphy,
case REG_REQ_OK:
break;
case REG_REQ_IGNORE:
+ case REG_REQ_USER_HINT_HANDLED:
kfree(driver_request);
return treatment;
case REG_REQ_INTERSECT:
@@ -1753,6 +1790,7 @@ reg_process_hint_country_ie(struct wiphy *wiphy,
case REG_REQ_OK:
break;
case REG_REQ_IGNORE:
+ case REG_REQ_USER_HINT_HANDLED:
/* fall through */
case REG_REQ_ALREADY_SET:
kfree(country_ie_request);
@@ -1945,6 +1983,22 @@ int regulatory_hint_user(const char *alpha2,
return 0;
}
+int regulatory_hint_indoor_user(void)
+{
+ struct regulatory_request *request;
+
+ request = kzalloc(sizeof(struct regulatory_request), GFP_KERNEL);
+ if (!request)
+ return -ENOMEM;
+
+ request->wiphy_idx = WIPHY_IDX_INVALID;
+ request->initiator = NL80211_REGDOM_SET_BY_USER;
+ request->user_reg_hint_type = NL80211_USER_REG_HINT_INDOOR;
+ queue_regulatory_request(request);
+
+ return 0;
+}
+
/* Driver hints */
int regulatory_hint(struct wiphy *wiphy, const char *alpha2)
{
@@ -2112,6 +2166,8 @@ static void restore_regulatory_settings(bool reset_user)
ASSERT_RTNL();
+ reg_is_indoor = false;
+
reset_regdomains(true, &world_regdom);
restore_alpha2(alpha2, reset_user);
@@ -2626,6 +2682,11 @@ int cfg80211_get_unii(int freq)
return -EINVAL;
}
+bool regulatory_indoor_allowed(void)
+{
+ return reg_is_indoor;
+}
+
int __init regulatory_init(void)
{
int err = 0;
diff --git a/net/wireless/reg.h b/net/wireless/reg.h
index 9c11e72..b350a30 100644
--- a/net/wireless/reg.h
+++ b/net/wireless/reg.h
@@ -25,6 +25,7 @@ enum nl80211_dfs_regions reg_get_dfs_region(struct wiphy *wiphy);
int regulatory_hint_user(const char *alpha2,
enum nl80211_user_reg_hint_type user_reg_hint_type);
+int regulatory_hint_indoor_user(void);
int reg_device_uevent(struct device *dev, struct kobj_uevent_env *env);
void wiphy_regulatory_register(struct wiphy *wiphy);
--
1.7.10.4
Allow GO operation on a channel marked with IEEE80211_CHAN_GO_CONCURRENT
iff there is an active station interface that is associated to
an AP operating on the same channel in the 2 GHz band or the same UNII band
(in the 5 GHz band). This relaxation is not allowed if the channel is
marked with IEEE80211_CHAN_RADAR.
Note that this is a permissive approach to the FCC definitions,
that require a clear assessment that the device operating the AP is
an authorized master, i.e., with radar detection and DFS capabilities.
It is assumed that such restrictions are enforced by user space.
Furthermore, it is assumed, that if the conditions that allowed for
the operation of the GO on such a channel change, i.e., the station
interface disconnected from the AP, it is the responsibility of user
space to evacuate the GO from the channel.
Signed-off-by: Ilan Peer <[email protected]>
---
include/net/cfg80211.h | 4 ++-
include/net/regulatory.h | 6 ++++
net/mac80211/ibss.c | 9 ++++--
net/wireless/Kconfig | 24 +++++++++++++++
net/wireless/chan.c | 76 ++++++++++++++++++++++++++++++++++++++++++++--
net/wireless/mesh.c | 3 +-
net/wireless/nl80211.c | 11 ++++---
net/wireless/reg.c | 29 ++++++++++++++++++
net/wireless/reg.h | 12 ++++++++
net/wireless/trace.h | 11 ++++---
10 files changed, 169 insertions(+), 16 deletions(-)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 2ba017c..e872c9c 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -4521,12 +4521,14 @@ void cfg80211_report_obss_beacon(struct wiphy *wiphy,
* cfg80211_reg_can_beacon - check if beaconing is allowed
* @wiphy: the wiphy
* @chandef: the channel definition
+ * @iftype: interface type
*
* Return: %true if there is no secondary channel or the secondary channel(s)
* can be used for beaconing (i.e. is not a radar channel etc.)
*/
bool cfg80211_reg_can_beacon(struct wiphy *wiphy,
- struct cfg80211_chan_def *chandef);
+ struct cfg80211_chan_def *chandef,
+ enum nl80211_iftype iftype);
/*
* cfg80211_ch_switch_notify - update wdev channel and notify userspace
diff --git a/include/net/regulatory.h b/include/net/regulatory.h
index b07cdc9..0d96cd0 100644
--- a/include/net/regulatory.h
+++ b/include/net/regulatory.h
@@ -131,6 +131,11 @@ struct regulatory_request {
* all country IE information processed by the regulatory core. This will
* override %REGULATORY_COUNTRY_IE_FOLLOW_POWER as all country IEs will
* be ignored.
+ * @REGULATORY_ENABLE_RELAX_NO_IR: for devices that wish to allow the
+ * NO_IR relaxation, which enables transmissions on channels on which
+ * otherwise initiating radiation is not allowed. This will enable the
+ * relaxations enabled under the CFG80211_REG_RELAX_NO_IR configuration
+ * option
*/
enum ieee80211_regulatory_flags {
REGULATORY_CUSTOM_REG = BIT(0),
@@ -138,6 +143,7 @@ enum ieee80211_regulatory_flags {
REGULATORY_DISABLE_BEACON_HINTS = BIT(2),
REGULATORY_COUNTRY_IE_FOLLOW_POWER = BIT(3),
REGULATORY_COUNTRY_IE_IGNORE = BIT(4),
+ REGULATORY_ENABLE_RELAX_NO_IR = BIT(5),
};
struct ieee80211_freq_range {
diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c
index 4453e27..a3b9561 100644
--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -262,7 +262,8 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
/* make a copy of the chandef, it could be modified below. */
chandef = *req_chandef;
chan = chandef.chan;
- if (!cfg80211_reg_can_beacon(local->hw.wiphy, &chandef)) {
+ if (!cfg80211_reg_can_beacon(local->hw.wiphy, &chandef,
+ NL80211_IFTYPE_ADHOC)) {
if (chandef.width == NL80211_CHAN_WIDTH_5 ||
chandef.width == NL80211_CHAN_WIDTH_10 ||
chandef.width == NL80211_CHAN_WIDTH_20_NOHT ||
@@ -274,7 +275,8 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
chandef.width = NL80211_CHAN_WIDTH_20;
chandef.center_freq1 = chan->center_freq;
/* check again for downgraded chandef */
- if (!cfg80211_reg_can_beacon(local->hw.wiphy, &chandef)) {
+ if (!cfg80211_reg_can_beacon(local->hw.wiphy, &chandef,
+ NL80211_IFTYPE_ADHOC)) {
sdata_info(sdata,
"Failed to join IBSS, beacons forbidden\n");
return;
@@ -856,7 +858,8 @@ ieee80211_ibss_process_chanswitch(struct ieee80211_sub_if_data *sdata,
goto disconnect;
}
- if (!cfg80211_reg_can_beacon(sdata->local->hw.wiphy, ¶ms.chandef)) {
+ if (!cfg80211_reg_can_beacon(sdata->local->hw.wiphy, ¶ms.chandef,
+ NL80211_IFTYPE_ADHOC)) {
sdata_info(sdata,
"IBSS %pM switches to unsupported channel (%d MHz, width:%d, CF1/2: %d/%d MHz), disconnecting\n",
ifibss->bssid,
diff --git a/net/wireless/Kconfig b/net/wireless/Kconfig
index 2a891bc..405f3c4 100644
--- a/net/wireless/Kconfig
+++ b/net/wireless/Kconfig
@@ -108,6 +108,30 @@ config CFG80211_REG_CELLULAR_HINTS
feature if you have tested and validated this feature on your
systems.
+config CFG80211_REG_RELAX_NO_IR
+ bool "cfg80211 support for NO_IR relaxation"
+ depends on CFG80211_CERTIFICATION_ONUS
+ ---help---
+ This option enables support for relaxation of the NO_IR flag for
+ situations that certain regulatory bodies have provided clarifications
+ on how relaxation can occur. This feature has an inherent dependency on
+ userspace features which must have been properly tested and as such is
+ not enabled by default.
+
+ A relaxation feature example is allowing the operation of a P2P group
+ owner (GO) on channels marked with NO_IR if there is an additional BSS
+ interface which associated to an AP which userspace assumes or confirms
+ to be an authorized master, i.e., with radar detection support and DFS
+ capabilities. However, note that in order to not create daisy chain
+ scenarios, this relaxation is not allowed in cases that the BSS client
+ is associated to P2P GO and in addition the P2P GO instantiated on
+ a channel due to this relaxation should not allow connection from
+ non P2P clients.
+
+ The regulatory core will apply these relaxations only for drivers that
+ support this feature by declaring the appropriate channel flags and
+ capabilities in their registration flow.
+
config CFG80211_DEFAULT_PS
bool "enable powersave by default"
depends on CFG80211
diff --git a/net/wireless/chan.c b/net/wireless/chan.c
index f8ab7df..cc255eb 100644
--- a/net/wireless/chan.c
+++ b/net/wireless/chan.c
@@ -605,15 +605,85 @@ bool cfg80211_chandef_usable(struct wiphy *wiphy,
}
EXPORT_SYMBOL(cfg80211_chandef_usable);
+/*
+ * For GO only, check if the channel can be used under permissive conditions
+ * mandated by the some regulatory bodies, i.e., the channel is marked with
+ * IEEE80211_CHAN_GO_CONCURRENT and there is an additional station interface
+ * associated to an AP on the same channel or on the same UNII band
+ * (assuming that the AP is an authorized master).
+ */
+static bool cfg80211_go_permissive_chan(struct cfg80211_registered_device *rdev,
+ struct ieee80211_channel *chan)
+{
+ struct wireless_dev *wdev_iter;
+ struct wiphy *wiphy = wiphy_idx_to_wiphy(rdev->wiphy_idx);
+
+ ASSERT_RTNL();
+
+ if (!config_enabled(CONFIG_CFG80211_REG_RELAX_NO_IR) ||
+ !(wiphy->regulatory_flags & REGULATORY_ENABLE_RELAX_NO_IR) ||
+ !(chan->flags & IEEE80211_CHAN_GO_CONCURRENT))
+ return false;
+
+ /*
+ * Generally, it is possible to rely on another device/driver to allow
+ * the GO concurrent relaxation, however, since the device can further
+ * enforce the relaxation (by doing a similar verifications as this),
+ * and thus fail the GO instantiation, consider only the interfaces of
+ * the current registered device.
+ */
+ list_for_each_entry(wdev_iter, &rdev->wdev_list, list) {
+ struct ieee80211_channel *other_chan = NULL;
+ int r1, r2;
+
+ if (wdev_iter->iftype != NL80211_IFTYPE_STATION ||
+ !netif_running(wdev_iter->netdev))
+ continue;
+
+ wdev_lock(wdev_iter);
+ if (wdev_iter->current_bss)
+ other_chan = wdev_iter->current_bss->pub.channel;
+ wdev_unlock(wdev_iter);
+
+ if (!other_chan)
+ continue;
+
+ if (chan == other_chan)
+ return true;
+
+ if (chan->band != IEEE80211_BAND_5GHZ)
+ continue;
+
+ r1 = cfg80211_get_unii(chan->center_freq);
+ r2 = cfg80211_get_unii(other_chan->center_freq);
+
+ if (r1 != -EINVAL && r1 == r2)
+ return true;
+ }
+
+ return false;
+}
+
bool cfg80211_reg_can_beacon(struct wiphy *wiphy,
- struct cfg80211_chan_def *chandef)
+ struct cfg80211_chan_def *chandef,
+ enum nl80211_iftype iftype)
{
+ struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
bool res;
u32 prohibited_flags = IEEE80211_CHAN_DISABLED |
- IEEE80211_CHAN_NO_IR |
IEEE80211_CHAN_RADAR;
- trace_cfg80211_reg_can_beacon(wiphy, chandef);
+ trace_cfg80211_reg_can_beacon(wiphy, chandef, iftype);
+
+ /*
+ * Under certain conditions suggested by the some regulatory bodies
+ * a GO can operate on channels marked with IEEE80211_NO_IR
+ * so set this flag only if such relaxations are not enabled and
+ * the conditions are not met.
+ */
+ if (iftype != NL80211_IFTYPE_P2P_GO ||
+ !cfg80211_go_permissive_chan(rdev, chandef->chan))
+ prohibited_flags |= IEEE80211_CHAN_NO_IR;
if (cfg80211_chandef_dfs_required(wiphy, chandef) > 0 &&
cfg80211_chandef_dfs_available(wiphy, chandef)) {
diff --git a/net/wireless/mesh.c b/net/wireless/mesh.c
index d42a3fc..45c2c85 100644
--- a/net/wireless/mesh.c
+++ b/net/wireless/mesh.c
@@ -175,7 +175,8 @@ int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
scan_width);
}
- if (!cfg80211_reg_can_beacon(&rdev->wiphy, &setup->chandef))
+ if (!cfg80211_reg_can_beacon(&rdev->wiphy, &setup->chandef,
+ NL80211_IFTYPE_MESH_POINT))
return -EINVAL;
err = cfg80211_chandef_dfs_required(wdev->wiphy, &setup->chandef);
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 95a8c72..2270d9b 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -1933,7 +1933,7 @@ static int __nl80211_set_channel(struct cfg80211_registered_device *rdev,
result = -EBUSY;
break;
}
- if (!cfg80211_reg_can_beacon(&rdev->wiphy, &chandef)) {
+ if (!cfg80211_reg_can_beacon(&rdev->wiphy, &chandef, iftype)) {
result = -EINVAL;
break;
}
@@ -3259,7 +3259,8 @@ static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info)
} else if (!nl80211_get_ap_channel(rdev, ¶ms))
return -EINVAL;
- if (!cfg80211_reg_can_beacon(&rdev->wiphy, ¶ms.chandef))
+ if (!cfg80211_reg_can_beacon(&rdev->wiphy, ¶ms.chandef,
+ wdev->iftype))
return -EINVAL;
err = cfg80211_chandef_dfs_required(wdev->wiphy, ¶ms.chandef);
@@ -5914,7 +5915,8 @@ skip_beacons:
if (err)
return err;
- if (!cfg80211_reg_can_beacon(&rdev->wiphy, ¶ms.chandef))
+ if (!cfg80211_reg_can_beacon(&rdev->wiphy, ¶ms.chandef,
+ wdev->iftype))
return -EINVAL;
if (dev->ieee80211_ptr->iftype == NL80211_IFTYPE_AP ||
@@ -6685,7 +6687,8 @@ static int nl80211_join_ibss(struct sk_buff *skb, struct genl_info *info)
if (err)
return err;
- if (!cfg80211_reg_can_beacon(&rdev->wiphy, &ibss.chandef))
+ if (!cfg80211_reg_can_beacon(&rdev->wiphy, &ibss.chandef,
+ NL80211_IFTYPE_ADHOC))
return -EINVAL;
switch (ibss.chandef.width) {
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 97af820..85aa847 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -2597,6 +2597,35 @@ static void reg_timeout_work(struct work_struct *work)
rtnl_unlock();
}
+/*
+ * See http://www.fcc.gov/document/5-ghz-unlicensed-spectrum-unii, for
+ * UNII band definitions
+ */
+int cfg80211_get_unii(int freq)
+{
+ /* UNII-1 */
+ if (freq >= 5150 && freq <= 5250)
+ return 0;
+
+ /* UNII-2A */
+ if (freq > 5250 && freq <= 5350)
+ return 1;
+
+ /* UNII-2B */
+ if (freq > 5350 && freq <= 5470)
+ return 2;
+
+ /* UNII-2C */
+ if (freq > 5470 && freq <= 5725)
+ return 3;
+
+ /* UNII-3 */
+ if (freq > 5725 && freq <= 5825)
+ return 4;
+
+ return -EINVAL;
+}
+
int __init regulatory_init(void)
{
int err = 0;
diff --git a/net/wireless/reg.h b/net/wireless/reg.h
index 1852461..9c11e72 100644
--- a/net/wireless/reg.h
+++ b/net/wireless/reg.h
@@ -105,4 +105,16 @@ void regulatory_hint_country_ie(struct wiphy *wiphy,
*/
void regulatory_hint_disconnect(void);
+/**
+ * cfg80211_get_unii - get the U-NII band for the frequency
+ * @freq: the frequency for which we want to get the UNII band.
+
+ * Get a value specifying the U-NII band frequency belongs to.
+ * U-NII bands are defined by the FCC in C.F.R 47 part 15.
+ *
+ * Returns -EINVAL if freq is invalid, 0 for UNII-1, 1 for UNII-2A,
+ * 2 for UNII-2B, 3 for UNII-2C and 4 for UNII-3.
+ */
+int cfg80211_get_unii(int freq);
+
#endif /* __NET_WIRELESS_REG_H */
diff --git a/net/wireless/trace.h b/net/wireless/trace.h
index 5eaeed5..6293e8d 100644
--- a/net/wireless/trace.h
+++ b/net/wireless/trace.h
@@ -2189,18 +2189,21 @@ TRACE_EVENT(cfg80211_cqm_rssi_notify,
);
TRACE_EVENT(cfg80211_reg_can_beacon,
- TP_PROTO(struct wiphy *wiphy, struct cfg80211_chan_def *chandef),
- TP_ARGS(wiphy, chandef),
+ TP_PROTO(struct wiphy *wiphy, struct cfg80211_chan_def *chandef,
+ enum nl80211_iftype iftype),
+ TP_ARGS(wiphy, chandef, iftype),
TP_STRUCT__entry(
WIPHY_ENTRY
CHAN_DEF_ENTRY
+ __field(enum nl80211_iftype, iftype)
),
TP_fast_assign(
WIPHY_ASSIGN;
CHAN_DEF_ASSIGN(chandef);
+ __entry->iftype = iftype;
),
- TP_printk(WIPHY_PR_FMT ", " CHAN_DEF_PR_FMT,
- WIPHY_PR_ARG, CHAN_DEF_PR_ARG)
+ TP_printk(WIPHY_PR_FMT ", " CHAN_DEF_PR_FMT ", iftype=%d",
+ WIPHY_PR_ARG, CHAN_DEF_PR_ARG, __entry->iftype)
);
TRACE_EVENT(cfg80211_chandef_dfs_required,
--
1.7.10.4
Hi,
Any comments on the last series?
Thanks in advance,
Ilan.
> -----Original Message-----
> From: Peer, Ilan
> Sent: Sunday, February 23, 2014 09:13
> To: [email protected]
> Cc: [email protected]; Peer, Ilan
> Subject: [PATCH v6 0/5] Enable additional channels for use
>
> Some additional documentation fixes.
>
> ------
>
> As before, this series addresses the option of enabling additional channels
> for use based on the following relaxations:
>
> 1. Indoor operation, where a device can use channels requiring indoor
> operation, subject to that it can guarantee indoor operation.
> 2. Concurrent GO operation, where devices may instantiate a P2P GO
> while they are under the guidance of an authorized master.
>
> The series includes:
>
> * Some clarification (mainly in documentation) about the intended usage of
> channels marked as INDOOR_ONLY and CONCURRENT GO.
> * Mapping of NL80211_RFF_NO_OUTDOOR to
> NL80211_CHAN_INDOOR_ONLY
> * Support for a user hint that the platform is operating in an indoor
> environment, i.e., channel marked as INDOOR_ONLY can be used.
> * Allow initiating radiation on channel marked with INDOOR_ONLY also
> for scanning an frame injection in monitor mode.
> * Some additional fixes for comments I got.
>
> Following is an example of a possible channel map that can be used to allow
> the INDOOR_ONLY and CONCURRENT_GO relaxations. Note that:
>
> * Channels 12,13 are marked as Concurrent GO, so even in the lack of exact
> information about the current regulatory domain, these channels can be
> used
> for GO instantiation based on the concurrent GO relaxation.
> * The above is also true for channels 149-165 (a.k.a U-NII 3).
> * Channels 36-48 (a.k.a thee U-NII 1), are marked both with Concurrent GO
> and
> indoor only. While the Concurrent GO can be used as described above, the
> indoor only setting allows to use these channels given the platform is
> identified as an indoor one, i.e., media server.
>
> 2412 MHz [1] (16.0 dBm)
> 2417 MHz [2] (16.0 dBm)
> 2422 MHz [3] (16.0 dBm)
> 2427 MHz [4] (16.0 dBm)
> 2432 MHz [5] (16.0 dBm)
> 2437 MHz [6] (16.0 dBm)
> 2442 MHz [7] (16.0 dBm)
> 2447 MHz [8] (16.0 dBm)
> 2452 MHz [9] (16.0 dBm)
> 2457 MHz [10] (16.0 dBm)
> 2462 MHz [11] (16.0 dBm)
> 2467 MHz [12] (16.0 dBm) (no IR, Concurrent GO)
> 2472 MHz [13] (16.0 dBm) (no IR, Concurrent GO)
> 5180 MHz [36] (16.0 dBm) (no IR, Indoor Only, Concurrent GO)
> 5200 MHz [40] (16.0 dBm) (no IR, Indoor Only, Concurrent GO)
> 5220 MHz [44] (16.0 dBm) (no IR, Indoor Only, Concurrent GO)
> 5240 MHz [48] (16.0 dBm) (no IR, Indoor Only, Concurrent GO)
> 5260 MHz [52] (16.0 dBm) (no IR, radar detection)
> 5280 MHz [56] (16.0 dBm) (no IR, radar detection)
> 5300 MHz [60] (16.0 dBm) (no IR, radar detection)
> 5320 MHz [64] (16.0 dBm) (no IR, radar detection)
> 5500 MHz [100] (16.0 dBm) (no IR, radar detection)
> 5520 MHz [104] (16.0 dBm) (no IR, radar detection)
> 5540 MHz [108] (16.0 dBm) (no IR, radar detection)
> 5560 MHz [112] (16.0 dBm) (no IR, radar detection)
> 5580 MHz [116] (16.0 dBm) (no IR, radar detection)
> 5600 MHz [120] (16.0 dBm) (no IR, radar detection)
> 5620 MHz [124] (16.0 dBm) (no IR, radar detection)
> 5640 MHz [128] (16.0 dBm) (no IR, radar detection)
> 5660 MHz [132] (16.0 dBm) (no IR, radar detection)
> 5680 MHz [136] (16.0 dBm) (no IR, radar detection)
> 5700 MHz [140] (16.0 dBm) (no IR, radar detection)
> 5720 MHz [144] (16.0 dBm) (no IR, radar detection)
> 5745 MHz [149] (16.0 dBm) (no IR, Concurrent GO)
> 5765 MHz [153] (16.0 dBm) (no IR, Concurrent GO)
> 5785 MHz [157] (16.0 dBm) (no IR, Concurrent GO)
> 5805 MHz [161] (16.0 dBm) (no IR, Concurrent GO)
> 5825 MHz [165] (16.0 dBm) (no IR, Concurrent GO)
>
> Thanks in advance,
>
> Ilan.
>
> David Spinadel (1):
> cfg80211: Add indoor only and GO concurrent channel attributes
>
> Ilan Peer (4):
> cfg80211: Add Kconfig option for cellular BS hints
> cfg80211: Enable GO operation on additional channels
> cfg80211: Add an option to hint indoor operation
> cfg80211: Enable GO operation on indoor channels
>
> include/net/cfg80211.h | 14 +++++-
> include/net/regulatory.h | 6 +++
> include/uapi/linux/nl80211.h | 26 ++++++++++++
> net/mac80211/ibss.c | 9 ++--
> net/wireless/Kconfig | 37 ++++++++++++++++
> net/wireless/chan.c | 84 ++++++++++++++++++++++++++++++++++--
> net/wireless/mesh.c | 3 +-
> net/wireless/nl80211.c | 35 ++++++++-------
> net/wireless/reg.c | 96
> +++++++++++++++++++++++++++++++++++++++++-
> net/wireless/reg.h | 13 ++++++
> net/wireless/trace.h | 11 +++--
> 11 files changed, 305 insertions(+), 29 deletions(-)
>
> --
> 1.7.10.4