From: Maithili Hinge <[email protected]>
To set AP in 1X1 or 2X2 mode through hostapd, we need to set
RX-STBC* in hostapd.conf file. Depending upon RX-STBC bit in
ht_cap IE received from hostapd, we need to update mcs set in
bss_cfg appropriately before starting AP.
Signed-off-by: Maithili Hinge <[email protected]>
Signed-off-by: Bing Zhao <[email protected]>
---
drivers/net/wireless/mwifiex/cfg80211.c | 6 +++---
drivers/net/wireless/mwifiex/fw.h | 5 +++++
drivers/net/wireless/mwifiex/uap_cmd.c | 20 ++++++++++++++++++++
3 files changed, 28 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index ee45d62..21ee27a 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -2100,10 +2100,10 @@ mwifiex_setup_ht_caps(struct ieee80211_sta_ht_cap *ht_info,
else
ht_info->cap &= ~IEEE80211_HT_CAP_SGI_40;
- if (ISSUPP_RXSTBC(adapter->hw_dot_11n_dev_cap))
- ht_info->cap |= 1 << IEEE80211_HT_CAP_RX_STBC_SHIFT;
+ if (adapter->user_dev_mcs_support == HT_STREAM_2X2)
+ ht_info->cap |= 3 << IEEE80211_HT_CAP_RX_STBC_SHIFT;
else
- ht_info->cap &= ~(3 << IEEE80211_HT_CAP_RX_STBC_SHIFT);
+ ht_info->cap |= 1 << IEEE80211_HT_CAP_RX_STBC_SHIFT;
if (ISSUPP_TXSTBC(adapter->hw_dot_11n_dev_cap))
ht_info->cap |= IEEE80211_HT_CAP_TX_STBC;
diff --git a/drivers/net/wireless/mwifiex/fw.h b/drivers/net/wireless/mwifiex/fw.h
index 341e419..b485dc1 100644
--- a/drivers/net/wireless/mwifiex/fw.h
+++ b/drivers/net/wireless/mwifiex/fw.h
@@ -202,6 +202,11 @@ enum MWIFIEX_802_11_PRIVACY_FILTER {
#define MWIFIEX_DEF_AMPDU IEEE80211_HT_AMPDU_PARM_FACTOR
+#define GET_RXSTBC(x) (x & IEEE80211_HT_CAP_RX_STBC)
+#define MWIFIEX_RX_STBC1 0x0100
+#define MWIFIEX_RX_STBC12 0x0200
+#define MWIFIEX_RX_STBC123 0x0300
+
/* dev_cap bitmap
* BIT
* 0-16 reserved
diff --git a/drivers/net/wireless/mwifiex/uap_cmd.c b/drivers/net/wireless/mwifiex/uap_cmd.c
index a6a6a53..9be6544 100644
--- a/drivers/net/wireless/mwifiex/uap_cmd.c
+++ b/drivers/net/wireless/mwifiex/uap_cmd.c
@@ -159,6 +159,7 @@ mwifiex_set_ht_params(struct mwifiex_private *priv,
struct cfg80211_ap_settings *params)
{
const u8 *ht_ie;
+ u16 cap_info;
if (!ISSUPP_11NENABLED(priv->adapter->fw_cap_info))
return;
@@ -168,6 +169,25 @@ mwifiex_set_ht_params(struct mwifiex_private *priv,
if (ht_ie) {
memcpy(&bss_cfg->ht_cap, ht_ie + 2,
sizeof(struct ieee80211_ht_cap));
+ cap_info = le16_to_cpu(bss_cfg->ht_cap.cap_info);
+ memset(&bss_cfg->ht_cap.mcs, 0,
+ priv->adapter->number_of_antenna);
+ switch (GET_RXSTBC(cap_info)) {
+ case MWIFIEX_RX_STBC1:
+ /* HT_CAP 1X1 mode */
+ memset(&bss_cfg->ht_cap.mcs, 0xff, 1);
+ break;
+ case MWIFIEX_RX_STBC12: /* fall through */
+ case MWIFIEX_RX_STBC123:
+ /* HT_CAP 2X2 mode */
+ memset(&bss_cfg->ht_cap.mcs, 0xff, 2);
+ break;
+ default:
+ dev_warn(priv->adapter->dev,
+ "Unsupported RX-STBC, default to 2x2\n");
+ memset(&bss_cfg->ht_cap.mcs, 0xff, 2);
+ break;
+ }
priv->ap_11n_enabled = 1;
} else {
memset(&bss_cfg->ht_cap , 0, sizeof(struct ieee80211_ht_cap));
--
1.8.2.3