Basic rate configuration is a bit different for rtl8187se.
Adding this also fixes the gcc warning introduced in last patch
about unhandled case in switch.
Signed-off-by: Andrea Merello <[email protected]>
---
drivers/net/wireless/rtl818x/rtl8180/dev.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c
index 767e104..6b237ed 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c
@@ -412,7 +412,6 @@ static void rtl8180_conf_basic_rates(struct ieee80211_hw *dev,
reg &= ~3;
reg |= max;
rtl818x_iowrite16(priv, &priv->map->BRSR, reg);
-
break;
case RTL818X_CHIP_FAMILY_RTL8185:
@@ -420,6 +419,11 @@ static void rtl8180_conf_basic_rates(struct ieee80211_hw *dev,
rtl818x_iowrite16(priv, &priv->map->BRSR, rates_mask);
rtl818x_iowrite8(priv, &priv->map->RESP_RATE, (max << 4) | min);
break;
+
+ case RTL818X_CHIP_FAMILY_RTL8187SE:
+ /* in 8187se this is a BITMAP */
+ rtl818x_iowrite16(priv, &priv->map->BRSR_8187SE, rates_mask);
+ break;
}
}
--
1.8.3.2