rtl8187se has more queues and different ISR flags.
This patch adds a separated ISR handler for rtl8187se
Signed-off-by: Andrea Merello <[email protected]>
---
drivers/net/wireless/rtl818x/rtl8180/dev.c | 57 +++++++++++++++++++++++++++++-
1 file changed, 56 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c
index 867ec07..242a4bc 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c
@@ -264,6 +264,55 @@ static void rtl8180_handle_tx(struct ieee80211_hw *dev, unsigned int prio)
}
}
+static irqreturn_t rtl8187se_interrupt(int irq, void *dev_id)
+{
+ struct ieee80211_hw *dev = dev_id;
+ struct rtl8180_priv *priv = dev->priv;
+ u32 reg;
+ unsigned long flags;
+ static int desc_err;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ /* Note: 32-bit interrupt status */
+ reg = rtl818x_ioread32(priv, &priv->map->INT_STATUS_SE);
+ if (unlikely(reg == 0xFFFFFFFF)) {
+ spin_unlock_irqrestore(&priv->lock, flags);
+ return IRQ_HANDLED;
+ }
+
+ rtl818x_iowrite32(priv, &priv->map->INT_STATUS_SE, reg);
+
+ if (reg & IMR_TIMEOUT1)
+ rtl818x_iowrite32(priv, &priv->map->INT_TIMEOUT, 0);
+
+ if (reg & (IMR_TBDOK | IMR_TBDER))
+ rtl8180_handle_tx(dev, 4);
+
+ if (reg & (IMR_TVODOK | IMR_TVODER))
+ rtl8180_handle_tx(dev, 0);
+
+ if (reg & (IMR_TVIDOK | IMR_TVIDER))
+ rtl8180_handle_tx(dev, 1);
+
+ if (reg & (IMR_TBEDOK | IMR_TBEDER))
+ rtl8180_handle_tx(dev, 2);
+
+ if (reg & (IMR_TBKDOK | IMR_TBKDER))
+ rtl8180_handle_tx(dev, 3);
+
+ if (reg & (IMR_ROK | IMR_RER | RTL818X_INT_SE_RX_DU | IMR_RQOSOK))
+ rtl8180_handle_rx(dev);
+ /* The interface sometimes generates several RX DMA descriptor errors
+ * at startup. Do not report these.
+ */
+ if ((reg & RTL818X_INT_SE_RX_DU) && desc_err++ > 2)
+ if (net_ratelimit())
+ wiphy_err(dev->wiphy, "No RX DMA Descriptor avail\n");
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+ return IRQ_HANDLED;
+}
+
static irqreturn_t rtl8180_interrupt(int irq, void *dev_id)
{
struct ieee80211_hw *dev = dev_id;
@@ -685,8 +734,14 @@ static int rtl8180_start(struct ieee80211_hw *dev)
if (ret)
goto err_free_rings;
- ret = request_irq(priv->pdev->irq, rtl8180_interrupt,
+ if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
+ ret = request_irq(priv->pdev->irq, rtl8187se_interrupt,
IRQF_SHARED, KBUILD_MODNAME, dev);
+ } else {
+ ret = request_irq(priv->pdev->irq, rtl8180_interrupt,
+ IRQF_SHARED, KBUILD_MODNAME, dev);
+ }
+
if (ret) {
wiphy_err(dev->wiphy, "failed to register IRQ handler\n");
goto err_free_rings;
--
1.8.3.2