rtl8187se nees extra parameters to be read from the eeprom.
This patch adds support for it
Signed-off-by: Andrea Merello <[email protected]>
---
drivers/net/wireless/rtl818x/rtl8180/dev.c | 18 +++++++++++++++++-
drivers/net/wireless/rtl818x/rtl8180/rtl8180.h | 7 +++++++
2 files changed, 24 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c
index 06d3c30..740a583 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c
@@ -1320,7 +1320,10 @@ static void rtl8180_eeprom_read(struct rtl8180_priv *priv)
eeprom_93cx6_multiread(&eeprom, 0x7, (__le16 *)priv->mac_addr, 3);
- eeprom_cck_table_adr = 0x10;
+ if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE)
+ eeprom_cck_table_adr = 0x30;
+ else
+ eeprom_cck_table_adr = 0x10;
/* CCK TX power */
for (i = 0; i < 14; i += 2) {
@@ -1348,6 +1351,19 @@ static void rtl8180_eeprom_read(struct rtl8180_priv *priv)
eeprom_93cx6_read(&eeprom, 0x19, &priv->rfparam);
}
+ if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
+ eeprom_93cx6_read(&eeprom, 0x3F, &eeprom_val);
+ priv->antenna_diversity_en = !!(eeprom_val & 0x100);
+ priv->antenna_diversity_default = (eeprom_val & 0xC00) == 0x400;
+
+ eeprom_93cx6_read(&eeprom, 0x7C, &eeprom_val);
+ priv->xtal_out = eeprom_val & 0xF;
+ priv->xtal_in = (eeprom_val & 0xF0) >> 4;
+ priv->xtal_cal = !!(eeprom_val & 0x1000);
+ priv->thermal_meter_val = (eeprom_val & 0xF00) >> 8;
+ priv->thermal_meter_en = !!(eeprom_val & 0x2000);
+ }
+
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
RTL818X_EEPROM_CMD_NORMAL);
}
diff --git a/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h b/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
index d64e75d..d8f92de 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
+++ b/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
@@ -132,6 +132,13 @@ struct rtl8180_priv {
u8 csthreshold;
u8 mac_addr[ETH_ALEN];
u8 rf_type;
+ u8 xtal_out;
+ u8 xtal_in;
+ u8 xtal_cal;
+ u8 thermal_meter_val;
+ u8 thermal_meter_en;
+ u8 antenna_diversity_en;
+ u8 antenna_diversity_default;
/* sequence # */
u16 seqno;
};
--
1.8.3.2