From: Avinash Patil <[email protected]>
In station role if TDLS is supported, we traverse TDLS peer list
to see if packet's destination address matches with TDLS peer.
Packets destined to AP are not sent over TDLS link and hence
avoid this list traversal for such packets.
Signed-off-by: Avinash Patil <[email protected]>
Signed-off-by: Bing Zhao <[email protected]>
---
drivers/net/wireless/mwifiex/wmm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/mwifiex/wmm.c b/drivers/net/wireless/mwifiex/wmm.c
index 94b6c74..f364d5f 100644
--- a/drivers/net/wireless/mwifiex/wmm.c
+++ b/drivers/net/wireless/mwifiex/wmm.c
@@ -648,7 +648,7 @@ mwifiex_wmm_add_buf_txqueue(struct mwifiex_private *priv,
if (ntohs(eth_hdr->h_proto) == ETH_P_TDLS)
dev_dbg(adapter->dev,
"TDLS setup packet for %pM. Don't block\n", ra);
- else
+ else if (memcmp(priv->cfg_bssid, ra, ETH_ALEN))
tdls_status = mwifiex_get_tdls_link_status(priv, ra);
}
--
1.8.2.3
From: Avinash Patil <[email protected]>
If TDLS link delete command fails because of non-existent peer
or TDLS peer is absent from driver's entry, it means link was
already deleted. In such case print debug messages with lower
severity.
Signed-off-by: Avinash Patil <[email protected]>
Signed-off-by: Bing Zhao <[email protected]>
---
drivers/net/wireless/mwifiex/sta_cmdresp.c | 18 ++++++++++++------
1 file changed, 12 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/mwifiex/sta_cmdresp.c b/drivers/net/wireless/mwifiex/sta_cmdresp.c
index bfebb01..577f297 100644
--- a/drivers/net/wireless/mwifiex/sta_cmdresp.c
+++ b/drivers/net/wireless/mwifiex/sta_cmdresp.c
@@ -865,14 +865,20 @@ static int mwifiex_ret_tdls_oper(struct mwifiex_private *priv,
switch (action) {
case ACT_TDLS_DELETE:
- if (reason)
- dev_err(priv->adapter->dev,
- "TDLS link delete for %pM failed: reason %d\n",
- cmd_tdls_oper->peer_mac, reason);
- else
+ if (reason) {
+ if (!node || reason == TDLS_ERR_LINK_NONEXISTENT)
+ dev_dbg(priv->adapter->dev,
+ "TDLS link delete for %pM failed: reason %d\n",
+ cmd_tdls_oper->peer_mac, reason);
+ else
+ dev_err(priv->adapter->dev,
+ "TDLS link delete for %pM failed: reason %d\n",
+ cmd_tdls_oper->peer_mac, reason);
+ } else {
dev_dbg(priv->adapter->dev,
- "TDLS link config for %pM successful\n",
+ "TDLS link delete for %pM successful\n",
cmd_tdls_oper->peer_mac);
+ }
break;
case ACT_TDLS_CREATE:
if (reason) {
--
1.8.2.3
From: Avinash Patil <[email protected]>
This patch fixes an issue where AMSDU packets for TDLS link
would flow over infra link. This happened because we were
missing setting TDLS flag in TxPD on AMSDU packets.
Signed-off-by: Avinash Patil <[email protected]>
Signed-off-by: Bing Zhao <[email protected]>
---
drivers/net/wireless/mwifiex/11n_aggr.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/net/wireless/mwifiex/11n_aggr.c b/drivers/net/wireless/mwifiex/11n_aggr.c
index 860dfe7..5b32106 100644
--- a/drivers/net/wireless/mwifiex/11n_aggr.c
+++ b/drivers/net/wireless/mwifiex/11n_aggr.c
@@ -100,6 +100,7 @@ mwifiex_11n_form_amsdu_txpd(struct mwifiex_private *priv,
struct sk_buff *skb)
{
struct txpd *local_tx_pd;
+ struct mwifiex_txinfo *tx_info = MWIFIEX_SKB_TXCB(skb);
skb_push(skb, sizeof(*local_tx_pd));
@@ -118,6 +119,9 @@ mwifiex_11n_form_amsdu_txpd(struct mwifiex_private *priv,
local_tx_pd->tx_pkt_length = cpu_to_le16(skb->len -
sizeof(*local_tx_pd));
+ if (tx_info->flags & MWIFIEX_BUF_FLAG_TDLS_PKT)
+ local_tx_pd->flags |= MWIFIEX_TXPD_FLAGS_TDLS_PACKET;
+
if (local_tx_pd->tx_control == 0)
/* TxCtrl set by user or default */
local_tx_pd->tx_control = cpu_to_le32(priv->pkt_tx_ctrl);
@@ -183,6 +187,9 @@ mwifiex_11n_aggregate_pkt(struct mwifiex_private *priv,
tx_info_aggr->bss_type = tx_info_src->bss_type;
tx_info_aggr->bss_num = tx_info_src->bss_num;
+
+ if (tx_info_src->flags & MWIFIEX_BUF_FLAG_TDLS_PKT)
+ tx_info_aggr->flags |= MWIFIEX_BUF_FLAG_TDLS_PKT;
skb_aggr->priority = skb_src->priority;
do_gettimeofday(&tv);
--
1.8.2.3
From: Avinash Patil <[email protected]>
If userspace application does not take care of TDLS teardown
event, TDLS link would be present in driver database and thus
driver would send such packets on direct link while peer has
already severed link causing data traffic failure. Disable TDLS
link upon teardown event so as to ensure this does not happen.
Signed-off-by: Avinash Patil <[email protected]>
Signed-off-by: Bing Zhao <[email protected]>
---
drivers/net/wireless/mwifiex/sta_event.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/mwifiex/sta_event.c b/drivers/net/wireless/mwifiex/sta_event.c
index 5aea719..f6395ef 100644
--- a/drivers/net/wireless/mwifiex/sta_event.c
+++ b/drivers/net/wireless/mwifiex/sta_event.c
@@ -137,6 +137,7 @@ mwifiex_reset_connect_state(struct mwifiex_private *priv, u16 reason_code)
static int mwifiex_parse_tdls_event(struct mwifiex_private *priv,
struct sk_buff *event_skb)
{
+ int ret = 0;
struct mwifiex_adapter *adapter = priv->adapter;
struct mwifiex_sta_node *sta_ptr;
struct mwifiex_tdls_generic_event *tdls_evt =
@@ -162,12 +163,15 @@ static int mwifiex_parse_tdls_event(struct mwifiex_private *priv,
NL80211_TDLS_TEARDOWN,
le16_to_cpu(tdls_evt->u.reason_code),
GFP_KERNEL);
+ ret = mwifiex_tdls_oper(priv, tdls_evt->peer_mac,
+ MWIFIEX_TDLS_DISABLE_LINK);
+ queue_work(adapter->workqueue, &adapter->main_work);
break;
default:
break;
}
- return 0;
+ return ret;
}
/*
--
1.8.2.3
From: Avinash Patil <[email protected]>
This patch adds handling of updating rx sequence number for
packets received from TDLS peer. Current implementation of
mwifiex_queueing_ra_based assumes station would always receive
packets from AP which is not true in case of TDLS.
Fix this by adding this case.
Signed-off-by: Avinash Patil <[email protected]>
Signed-off-by: Bing Zhao <[email protected]>
---
drivers/net/wireless/mwifiex/fw.h | 3 ++-
drivers/net/wireless/mwifiex/sta_rx.c | 16 ++++++++++++++--
2 files changed, 16 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/mwifiex/fw.h b/drivers/net/wireless/mwifiex/fw.h
index ee59508..42eaeda 100644
--- a/drivers/net/wireless/mwifiex/fw.h
+++ b/drivers/net/wireless/mwifiex/fw.h
@@ -539,6 +539,7 @@ struct mwifiex_ie_types_data {
#define MWIFIEX_TxPD_POWER_MGMT_NULL_PACKET 0x01
#define MWIFIEX_TxPD_POWER_MGMT_LAST_PACKET 0x08
#define MWIFIEX_TXPD_FLAGS_TDLS_PACKET 0x10
+#define MWIFIEX_RXPD_FLAGS_TDLS_PACKET 0x01
struct txpd {
u8 bss_type;
@@ -581,7 +582,7 @@ struct rxpd {
* [Bit 7] Reserved
*/
u8 ht_info;
- u8 reserved;
+ u8 flags;
} __packed;
struct uap_txpd {
diff --git a/drivers/net/wireless/mwifiex/sta_rx.c b/drivers/net/wireless/mwifiex/sta_rx.c
index ed26387..8b639d7 100644
--- a/drivers/net/wireless/mwifiex/sta_rx.c
+++ b/drivers/net/wireless/mwifiex/sta_rx.c
@@ -183,6 +183,7 @@ int mwifiex_process_sta_rx_packet(struct mwifiex_private *priv,
struct rx_packet_hdr *rx_pkt_hdr;
u8 ta[ETH_ALEN];
u16 rx_pkt_type, rx_pkt_offset, rx_pkt_length, seq_num;
+ struct mwifiex_sta_node *sta_ptr;
local_rx_pd = (struct rxpd *) (skb->data);
rx_pkt_type = le16_to_cpu(local_rx_pd->rx_pkt_type);
@@ -213,14 +214,25 @@ int mwifiex_process_sta_rx_packet(struct mwifiex_private *priv,
* If the packet is not an unicast packet then send the packet
* directly to os. Don't pass thru rx reordering
*/
- if (!IS_11N_ENABLED(priv) ||
+ if ((!IS_11N_ENABLED(priv) &&
+ !(ISSUPP_TDLS_ENABLED(priv->adapter->fw_cap_info) &&
+ !(local_rx_pd->flags & MWIFIEX_RXPD_FLAGS_TDLS_PACKET))) ||
!ether_addr_equal_unaligned(priv->curr_addr, rx_pkt_hdr->eth803_hdr.h_dest)) {
mwifiex_process_rx_packet(priv, skb);
return ret;
}
- if (mwifiex_queuing_ra_based(priv)) {
+ if (mwifiex_queuing_ra_based(priv) ||
+ (ISSUPP_TDLS_ENABLED(priv->adapter->fw_cap_info) &&
+ local_rx_pd->flags & MWIFIEX_RXPD_FLAGS_TDLS_PACKET)) {
memcpy(ta, rx_pkt_hdr->eth803_hdr.h_source, ETH_ALEN);
+ if (local_rx_pd->flags & MWIFIEX_RXPD_FLAGS_TDLS_PACKET &&
+ local_rx_pd->priority < MAX_NUM_TID) {
+ sta_ptr = mwifiex_get_sta_entry(priv, ta);
+ if (sta_ptr)
+ sta_ptr->rx_seq[local_rx_pd->priority] =
+ le16_to_cpu(local_rx_pd->seq_num);
+ }
} else {
if (rx_pkt_type != PKT_TYPE_BAR)
priv->rx_seq[local_rx_pd->priority] = seq_num;
--
1.8.2.3