This series of patches contains fixes, adds support for
5GHz and bgscan and 40MHz.
Jahnavi Meher (16):
rsi: Mapping the debugfs stats to the correct s/w queues.
rsi: Fixed the kernel doc
rsi: Using band from rsi_common to fill in ieee80211_rx_status
rsi: Add macros for endpoints and set default value of endpoint.
rsi: Changed the radio caps frame.
rsi: Changed the rsi_set_channel() and rsi_program_bb_rf().
rsi: Changed rate handling.
rsi: Lower level debug messages and changed handling of confirm
received for rsi_program_bb_rf().
rsi: Use SGI if configured for fixed rate transmission.
rsi: Changed the SDIO interrupt variables and some clean up.
rsi: Changed the logic of dequeuing packets from hal queues.
rsi: Added debug messages.
rsi: Sending QoS null packet via the mgmt queue.
rsi: Adding support for 5GHz
rsi: Adding support for host based bgscan.
rsi: Changes for 40MHz
drivers/net/wireless/rsi/rsi_91x_core.c | 85 +++++++---
drivers/net/wireless/rsi/rsi_91x_debugfs.c | 10 +-
drivers/net/wireless/rsi/rsi_91x_mac80211.c | 143 ++++++++++++++---
drivers/net/wireless/rsi/rsi_91x_mgmt.c | 236 +++++++++++++++++++--------
drivers/net/wireless/rsi/rsi_91x_pkt.c | 17 ++
drivers/net/wireless/rsi/rsi_91x_sdio_ops.c | 8 +-
drivers/net/wireless/rsi/rsi_main.h | 12 ++
drivers/net/wireless/rsi/rsi_mgmt.h | 25 +++-
drivers/net/wireless/rsi/rsi_sdio.h | 8 +-
9 files changed, 416 insertions(+), 128 deletions(-)
On Sun, Jun 15, 2014 at 1:48 PM, Arend van Spriel <[email protected]> wrote:
>
> On 14-06-14 15:48, Jahnavi Meher wrote:
>>
>> This series of patches contains fixes, adds support for
>> 5GHz and bgscan and 40MHz.
>
>
> Thanks for splitting up this series. It would be good to version the series, ie. [PATCH v2 xx/16] and indicate this replaces the previous patch series referring to the Message-ID. In this case
>
> Message-ID: <[email protected]>
>
> Regards,
> Arend
How can I indicate that this patch series is referring to a particular
Message-ID? Should I specify it
in the "Message-ID to be used as In-Reply-To for the first email?"
field that appears while sending out
a mail via git? I have just started using git and am not sure if this
was what you meant.
>
>
>> Jahnavi Meher (16):
>> rsi: Mapping the debugfs stats to the correct s/w queues.
>> rsi: Fixed the kernel doc
>> rsi: Using band from rsi_common to fill in ieee80211_rx_status
>> rsi: Add macros for endpoints and set default value of endpoint.
>> rsi: Changed the radio caps frame.
>> rsi: Changed the rsi_set_channel() and rsi_program_bb_rf().
>> rsi: Changed rate handling.
>> rsi: Lower level debug messages and changed handling of confirm
>> received for rsi_program_bb_rf().
>> rsi: Use SGI if configured for fixed rate transmission.
>> rsi: Changed the SDIO interrupt variables and some clean up.
>> rsi: Changed the logic of dequeuing packets from hal queues.
>> rsi: Added debug messages.
>> rsi: Sending QoS null packet via the mgmt queue.
>> rsi: Adding support for 5GHz
>> rsi: Adding support for host based bgscan.
>> rsi: Changes for 40MHz
>>
>> drivers/net/wireless/rsi/rsi_91x_core.c | 85 +++++++---
>> drivers/net/wireless/rsi/rsi_91x_debugfs.c | 10 +-
>> drivers/net/wireless/rsi/rsi_91x_mac80211.c | 143 ++++++++++++++---
>> drivers/net/wireless/rsi/rsi_91x_mgmt.c | 236 +++++++++++++++++++--------
>> drivers/net/wireless/rsi/rsi_91x_pkt.c | 17 ++
>> drivers/net/wireless/rsi/rsi_91x_sdio_ops.c | 8 +-
>> drivers/net/wireless/rsi/rsi_main.h | 12 ++
>> drivers/net/wireless/rsi/rsi_mgmt.h | 25 +++-
>> drivers/net/wireless/rsi/rsi_sdio.h | 8 +-
>> 9 files changed, 416 insertions(+), 128 deletions(-)
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
>> the body of a message to [email protected]
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
>
--
Regards,
Jahnavi Meher
On 16-06-14 12:38, Jahnavi Meher wrote:
> On Sun, Jun 15, 2014 at 1:48 PM, Arend van Spriel <[email protected]> wrote:
>>
>> On 14-06-14 15:48, Jahnavi Meher wrote:
>>>
>>> This series of patches contains fixes, adds support for
>>> 5GHz and bgscan and 40MHz.
>>
>>
>> Thanks for splitting up this series. It would be good to version the series, ie. [PATCH v2 xx/16] and indicate this replaces the previous patch series referring to the Message-ID. In this case
>>
>> Message-ID: <[email protected]>
>>
>> Regards,
>> Arend
>
> How can I indicate that this patch series is referring to a particular
> Message-ID? Should I specify it
> in the "Message-ID to be used as In-Reply-To for the first email?"
> field that appears while sending out
> a mail via git? I have just started using git and am not sure if this
> was what you meant.
I meant to add a paragraph to the cover-letter stating "This series
replaces the previous series with Message-ID:
<[email protected]>" so John can clean his
patch queue. Using the git In-Reply-To can also be useful as it will
group the patch series together in online archives.
Regards,
Arend
>>
>>
>>> Jahnavi Meher (16):
>>> rsi: Mapping the debugfs stats to the correct s/w queues.
>>> rsi: Fixed the kernel doc
>>> rsi: Using band from rsi_common to fill in ieee80211_rx_status
>>> rsi: Add macros for endpoints and set default value of endpoint.
>>> rsi: Changed the radio caps frame.
>>> rsi: Changed the rsi_set_channel() and rsi_program_bb_rf().
>>> rsi: Changed rate handling.
>>> rsi: Lower level debug messages and changed handling of confirm
>>> received for rsi_program_bb_rf().
>>> rsi: Use SGI if configured for fixed rate transmission.
>>> rsi: Changed the SDIO interrupt variables and some clean up.
>>> rsi: Changed the logic of dequeuing packets from hal queues.
>>> rsi: Added debug messages.
>>> rsi: Sending QoS null packet via the mgmt queue.
>>> rsi: Adding support for 5GHz
>>> rsi: Adding support for host based bgscan.
>>> rsi: Changes for 40MHz
>>>
>>> drivers/net/wireless/rsi/rsi_91x_core.c | 85 +++++++---
>>> drivers/net/wireless/rsi/rsi_91x_debugfs.c | 10 +-
>>> drivers/net/wireless/rsi/rsi_91x_mac80211.c | 143 ++++++++++++++---
>>> drivers/net/wireless/rsi/rsi_91x_mgmt.c | 236 +++++++++++++++++++--------
>>> drivers/net/wireless/rsi/rsi_91x_pkt.c | 17 ++
>>> drivers/net/wireless/rsi/rsi_91x_sdio_ops.c | 8 +-
>>> drivers/net/wireless/rsi/rsi_main.h | 12 ++
>>> drivers/net/wireless/rsi/rsi_mgmt.h | 25 +++-
>>> drivers/net/wireless/rsi/rsi_sdio.h | 8 +-
>>> 9 files changed, 416 insertions(+), 128 deletions(-)
>>>
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
>>> the body of a message to [email protected]
>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>
>>
>
>
>
On 14-06-14 15:48, Jahnavi Meher wrote:
> This series of patches contains fixes, adds support for
> 5GHz and bgscan and 40MHz.
Thanks for splitting up this series. It would be good to version the
series, ie. [PATCH v2 xx/16] and indicate this replaces the previous
patch series referring to the Message-ID. In this case
Message-ID: <[email protected]>
Regards,
Arend
> Jahnavi Meher (16):
> rsi: Mapping the debugfs stats to the correct s/w queues.
> rsi: Fixed the kernel doc
> rsi: Using band from rsi_common to fill in ieee80211_rx_status
> rsi: Add macros for endpoints and set default value of endpoint.
> rsi: Changed the radio caps frame.
> rsi: Changed the rsi_set_channel() and rsi_program_bb_rf().
> rsi: Changed rate handling.
> rsi: Lower level debug messages and changed handling of confirm
> received for rsi_program_bb_rf().
> rsi: Use SGI if configured for fixed rate transmission.
> rsi: Changed the SDIO interrupt variables and some clean up.
> rsi: Changed the logic of dequeuing packets from hal queues.
> rsi: Added debug messages.
> rsi: Sending QoS null packet via the mgmt queue.
> rsi: Adding support for 5GHz
> rsi: Adding support for host based bgscan.
> rsi: Changes for 40MHz
>
> drivers/net/wireless/rsi/rsi_91x_core.c | 85 +++++++---
> drivers/net/wireless/rsi/rsi_91x_debugfs.c | 10 +-
> drivers/net/wireless/rsi/rsi_91x_mac80211.c | 143 ++++++++++++++---
> drivers/net/wireless/rsi/rsi_91x_mgmt.c | 236 +++++++++++++++++++--------
> drivers/net/wireless/rsi/rsi_91x_pkt.c | 17 ++
> drivers/net/wireless/rsi/rsi_91x_sdio_ops.c | 8 +-
> drivers/net/wireless/rsi/rsi_main.h | 12 ++
> drivers/net/wireless/rsi/rsi_mgmt.h | 25 +++-
> drivers/net/wireless/rsi/rsi_sdio.h | 8 +-
> 9 files changed, 416 insertions(+), 128 deletions(-)
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>