This is the fifth "PATCH" patchset iteration for the ath10k spectral
scan feature. It includes a small change compared to Kalles PATCHv4
series: the parameter initialization has been moved to
ath10k_spectral_start() so that the parameters also get reset when the
firmware crashes.
To view the samples, please have a look at the fft_eval tool [1] which
now supports both ath9k and ath10k formats.
The count issue is still open: Even when a count is specified, the
hardware seems to send endless samples. It seems to work most of the
time in VHT80 mode though, but in HT20 and HT40 the count value seems
to be ignored. To reproduce this, start hostapd with the desired
channel width and do:
echo 8 > /sys/kernel/debug/ieee80211/phy0/ath10k/spectral_count
echo manual > /sys/kernel/debug/ieee80211/phy0/ath10k/spectral_scan_ctl
echo trigger > /sys/kernel/debug/ieee80211/phy0/ath10k/spectral_scan_ctl
cat /sys/kernel/debug/ieee80211/phy0/ath10k/spectral_scan0 >> /tmp/fft.dump
Repeating the last line and checking the filesize will easily show
whether ath10k still sends samples or not. We would expect 8 samples in
this configuration.
Please see the patches for more information on the changes.
Cheers,
Simon
[1] https://github.com/simonwunderlich/FFT_eval
Simon Wunderlich (1):
ath10k: add spectral scan feature
Sven Eckelmann (1):
ath: Move spectral debugfs structs to shared header
drivers/net/wireless/ath/ath10k/Kconfig | 1 +
drivers/net/wireless/ath/ath10k/Makefile | 1 +
drivers/net/wireless/ath/ath10k/core.c | 10 +
drivers/net/wireless/ath/ath10k/core.h | 11 +
drivers/net/wireless/ath/ath10k/mac.c | 8 +
drivers/net/wireless/ath/ath10k/spectral.c | 561 +++++++++++++++++++++++++++++
drivers/net/wireless/ath/ath10k/spectral.h | 90 +++++
drivers/net/wireless/ath/ath10k/wmi.c | 105 +++++-
drivers/net/wireless/ath/ath10k/wmi.h | 97 +++++
drivers/net/wireless/ath/ath9k/spectral.h | 71 +---
drivers/net/wireless/ath/spectral_common.h | 113 ++++++
11 files changed, 998 insertions(+), 70 deletions(-)
create mode 100644 drivers/net/wireless/ath/ath10k/spectral.c
create mode 100644 drivers/net/wireless/ath/ath10k/spectral.h
create mode 100644 drivers/net/wireless/ath/spectral_common.h
--
1.9.1
> On Fri, Aug 1, 2014 at 6:17 AM, Simon Wunderlich <[email protected]>
wrote:
> > To view the samples, please have a look at the fft_eval tool [1] which
> > now supports both ath9k and ath10k formats.
>
> Can you please edit the ath9k and ath10k wiki about this tool and
> reference to it?
Thanks for pointing that out. I've updated ath9k with some instructions how to
actually run the spectral scan. A link to the tool was already included. I've
also added an ath10k page with test instructions and description of the
debugfs files, including a reference to fft_eval. Feel free to
update/improve/edit, everyone. :)
I did not update the iw page because there is (no longer) any changes
neccesary in iw for running spectral - we had this only in the very first
version of the ath9k patch. I've updated the README/usage in fft_eval to
reflect that properly, though.
Thanks,
Simon
Adds the spectral scan feature for ath10k. The spectral scan is triggered by
configuring a mode through a debugfs control file. Samples can be gathered via
another relay debugfs file.
Essentially, to try it out:
ip link set dev wlan0 up
echo background > /sys/kernel/debug/ieee80211/phy0/ath10k/spectral_scan_ctl
echo trigger > /sys/kernel/debug/ieee80211/phy0/ath10k/spectral_scan_ctl
iw dev wlan0 scan
echo disable > /sys/kernel/debug/ieee80211/phy0/ath10k/spectral_scan_ctl
cat /sys/kernel/debug/ieee80211/phy0/ath10k/spectral_scan0 > samples
This feature is still experimental. Based on the original RFC patch of
Sven Eckelmann.
Signed-off-by: Simon Wunderlich <[email protected]>
Signed-off-by: Mathias Kretschmer <[email protected]>
---
PATCHv4:
siwu: move parameter initialization into spectral_start() to reset
parameters after firmware crash
PATCHv3:
kvalo: CPTCFG_ -> CONFIG_, rework how spectral.c is initialised
---
drivers/net/wireless/ath/ath10k/Kconfig | 1 +
drivers/net/wireless/ath/ath10k/Makefile | 1 +
drivers/net/wireless/ath/ath10k/core.c | 10 +
drivers/net/wireless/ath/ath10k/core.h | 11 +
drivers/net/wireless/ath/ath10k/mac.c | 8 +
drivers/net/wireless/ath/ath10k/spectral.c | 561 +++++++++++++++++++++++++++++
drivers/net/wireless/ath/ath10k/spectral.h | 90 +++++
drivers/net/wireless/ath/ath10k/wmi.c | 105 +++++-
drivers/net/wireless/ath/ath10k/wmi.h | 97 +++++
drivers/net/wireless/ath/spectral_common.h | 25 ++
10 files changed, 908 insertions(+), 1 deletion(-)
create mode 100644 drivers/net/wireless/ath/ath10k/spectral.c
create mode 100644 drivers/net/wireless/ath/ath10k/spectral.h
diff --git a/drivers/net/wireless/ath/ath10k/Kconfig b/drivers/net/wireless/ath/ath10k/Kconfig
index a6f5285..1053bb5 100644
--- a/drivers/net/wireless/ath/ath10k/Kconfig
+++ b/drivers/net/wireless/ath/ath10k/Kconfig
@@ -25,6 +25,7 @@ config ATH10K_DEBUG
config ATH10K_DEBUGFS
bool "Atheros ath10k debugfs support"
depends on ATH10K
+ select RELAY
---help---
Enabled debugfs support
diff --git a/drivers/net/wireless/ath/ath10k/Makefile b/drivers/net/wireless/ath/ath10k/Makefile
index a4179f4..2cfb63c 100644
--- a/drivers/net/wireless/ath/ath10k/Makefile
+++ b/drivers/net/wireless/ath/ath10k/Makefile
@@ -10,6 +10,7 @@ ath10k_core-y += mac.o \
wmi.o \
bmi.o
+ath10k_core-$(CONFIG_ATH10K_DEBUGFS) += spectral.o
ath10k_core-$(CONFIG_ATH10K_TRACING) += trace.o
obj-$(CONFIG_ATH10K_PCI) += ath10k_pci.o
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index bef797d..440c3ff 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -1000,9 +1000,17 @@ static void ath10k_core_register_work(struct work_struct *work)
goto err_unregister_mac;
}
+ status = ath10k_spectral_create(ar);
+ if (status) {
+ ath10k_err("failed to initialize spectral\n");
+ goto err_debug_destroy;
+ }
+
set_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags);
return;
+err_debug_destroy:
+ ath10k_debug_destroy(ar);
err_unregister_mac:
ath10k_mac_unregister(ar);
err_release_fw:
@@ -1046,6 +1054,8 @@ void ath10k_core_unregister(struct ath10k *ar)
ath10k_core_free_firmware_files(ar);
+ ath10k_spectral_destroy(ar);
+
ath10k_debug_destroy(ar);
}
EXPORT_SYMBOL(ath10k_core_unregister);
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index ded3af2..d5c95d4 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -31,6 +31,7 @@
#include "../ath.h"
#include "../regd.h"
#include "../dfs_pattern_detector.h"
+#include "spectral.h"
#define MS(_v, _f) (((_v) & _f##_MASK) >> _f##_LSB)
#define SM(_v, _f) (((_v) << _f##_LSB) & _f##_MASK)
@@ -237,6 +238,7 @@ struct ath10k_vif {
bool is_started;
bool is_up;
+ bool spectral_enabled;
u32 aid;
u8 bssid[ETH_ALEN];
@@ -499,6 +501,15 @@ struct ath10k {
#ifdef CONFIG_ATH10K_DEBUGFS
struct ath10k_debug debug;
#endif
+
+ struct {
+ /* relay(fs) channel for spectral scan */
+ struct rchan *rfs_chan_spec_scan;
+
+ /* spectral_mode and spec_config are protected by conf_mutex */
+ enum ath10k_spectral_mode mode;
+ struct ath10k_spec_scan config;
+ } spectral;
};
struct ath10k *ath10k_core_create(void *hif_priv, struct device *dev,
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 9d61bb1..d14f142 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -2485,6 +2485,8 @@ static int ath10k_start(struct ieee80211_hw *hw)
ar->num_started_vdevs = 0;
ath10k_regd_update(ar);
+ ath10k_spectral_start(ar);
+
mutex_unlock(&ar->conf_mutex);
return 0;
@@ -2892,8 +2894,14 @@ static void ath10k_remove_interface(struct ieee80211_hw *hw,
dev_kfree_skb_any(arvif->beacon);
arvif->beacon = NULL;
}
+
spin_unlock_bh(&ar->data_lock);
+ ret = ath10k_spectral_vif_stop(arvif);
+ if (ret)
+ ath10k_warn("failed to stop spectral for vdev %i: %d\n",
+ arvif->vdev_id, ret);
+
ar->free_vdev_map |= 1 << (arvif->vdev_id);
list_del(&arvif->list);
diff --git a/drivers/net/wireless/ath/ath10k/spectral.c b/drivers/net/wireless/ath/ath10k/spectral.c
new file mode 100644
index 0000000..a53afc2
--- /dev/null
+++ b/drivers/net/wireless/ath/ath10k/spectral.c
@@ -0,0 +1,561 @@
+/*
+ * Copyright (c) 2013 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/relay.h>
+#include "core.h"
+#include "debug.h"
+
+static void send_fft_sample(struct ath10k *ar,
+ const struct fft_sample_tlv *fft_sample_tlv)
+{
+ int length;
+
+ if (!ar->spectral.rfs_chan_spec_scan)
+ return;
+
+ length = __be16_to_cpu(fft_sample_tlv->length) +
+ sizeof(*fft_sample_tlv);
+ relay_write(ar->spectral.rfs_chan_spec_scan, fft_sample_tlv, length);
+}
+
+static uint8_t get_max_exp(s8 max_index, u16 max_magnitude, size_t bin_len,
+ u8 *data)
+{
+ int dc_pos;
+ u8 max_exp;
+
+ dc_pos = bin_len / 2;
+
+ /* peak index outside of bins */
+ if (dc_pos < max_index || -dc_pos >= max_index)
+ return 0;
+
+ for (max_exp = 0; max_exp < 8; max_exp++) {
+ if (data[dc_pos + max_index] == (max_magnitude >> max_exp))
+ break;
+ }
+
+ /* max_exp not found */
+ if (data[dc_pos + max_index] != (max_magnitude >> max_exp))
+ return 0;
+
+ return max_exp;
+}
+
+int ath10k_spectral_process_fft(struct ath10k *ar,
+ struct wmi_single_phyerr_rx_event *event,
+ struct phyerr_fft_report *fftr,
+ size_t bin_len, u64 tsf)
+{
+ struct fft_sample_ath10k *fft_sample;
+ u8 buf[sizeof(*fft_sample) + SPECTRAL_ATH10K_MAX_NUM_BINS];
+ u16 freq1, freq2, total_gain_db, base_pwr_db, length, peak_mag;
+ u32 reg0, reg1, nf_list1, nf_list2;
+ u8 chain_idx, *bins;
+ int dc_pos;
+
+ fft_sample = (struct fft_sample_ath10k *)&buf;
+
+ if (bin_len < 64 || bin_len > SPECTRAL_ATH10K_MAX_NUM_BINS)
+ return -EINVAL;
+
+ reg0 = __le32_to_cpu(fftr->reg0);
+ reg1 = __le32_to_cpu(fftr->reg1);
+
+ length = sizeof(*fft_sample) - sizeof(struct fft_sample_tlv) + bin_len;
+ fft_sample->tlv.type = ATH_FFT_SAMPLE_ATH10K;
+ fft_sample->tlv.length = __cpu_to_be16(length);
+
+ /* TODO: there might be a reason why the hardware reports 20/40/80 MHz,
+ * but the results/plots suggest that its actually 22/44/88 MHz.
+ */
+ switch (event->hdr.chan_width_mhz) {
+ case 20:
+ fft_sample->chan_width_mhz = 22;
+ break;
+ case 40:
+ fft_sample->chan_width_mhz = 44;
+ break;
+ case 80:
+ /* TODO: As experiments with an analogue sender and various
+ * configuaritions (fft-sizes of 64/128/256 and 20/40/80 Mhz)
+ * show, the particular configuration of 80 MHz/64 bins does
+ * not match with the other smaples at all. Until the reason
+ * for that is found, don't report these samples.
+ */
+ if (bin_len == 64)
+ return -EINVAL;
+ fft_sample->chan_width_mhz = 88;
+ break;
+ default:
+ fft_sample->chan_width_mhz = event->hdr.chan_width_mhz;
+ }
+
+ fft_sample->relpwr_db = MS(reg1, SEARCH_FFT_REPORT_REG1_RELPWR_DB);
+ fft_sample->avgpwr_db = MS(reg1, SEARCH_FFT_REPORT_REG1_AVGPWR_DB);
+
+ peak_mag = MS(reg1, SEARCH_FFT_REPORT_REG1_PEAK_MAG);
+ fft_sample->max_magnitude = __cpu_to_be16(peak_mag);
+ fft_sample->max_index = MS(reg0, SEARCH_FFT_REPORT_REG0_PEAK_SIDX);
+ fft_sample->rssi = event->hdr.rssi_combined;
+
+ total_gain_db = MS(reg0, SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB);
+ base_pwr_db = MS(reg0, SEARCH_FFT_REPORT_REG0_BASE_PWR_DB);
+ fft_sample->total_gain_db = __cpu_to_be16(total_gain_db);
+ fft_sample->base_pwr_db = __cpu_to_be16(base_pwr_db);
+
+ freq1 = __le16_to_cpu(event->hdr.freq1);
+ freq2 = __le16_to_cpu(event->hdr.freq2);
+ fft_sample->freq1 = __cpu_to_be16(freq1);
+ fft_sample->freq2 = __cpu_to_be16(freq2);
+
+ nf_list1 = __le32_to_cpu(event->hdr.nf_list_1);
+ nf_list2 = __le32_to_cpu(event->hdr.nf_list_2);
+ chain_idx = MS(reg0, SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX);
+
+ switch (chain_idx) {
+ case 0:
+ fft_sample->noise = __cpu_to_be16(nf_list1 & 0xffffu);
+ break;
+ case 1:
+ fft_sample->noise = __cpu_to_be16((nf_list1 >> 16) & 0xffffu);
+ break;
+ case 2:
+ fft_sample->noise = __cpu_to_be16(nf_list2 & 0xffffu);
+ break;
+ case 3:
+ fft_sample->noise = __cpu_to_be16((nf_list2 >> 16) & 0xffffu);
+ break;
+ }
+
+ bins = (u8 *)fftr;
+ bins += sizeof(*fftr);
+
+ fft_sample->tsf = __cpu_to_be64(tsf);
+
+ /* max_exp has been directly reported by previous hardware (ath9k),
+ * maybe its possible to get it by other means?
+ */
+ fft_sample->max_exp = get_max_exp(fft_sample->max_index, peak_mag,
+ bin_len, bins);
+
+ memcpy(fft_sample->data, bins, bin_len);
+
+ /* DC value (value in the middle) is the blind spot of the spectral
+ * sample and invalid, interpolate it.
+ */
+ dc_pos = bin_len / 2;
+ fft_sample->data[dc_pos] = (fft_sample->data[dc_pos + 1] +
+ fft_sample->data[dc_pos - 1]) / 2;
+
+ send_fft_sample(ar, &fft_sample->tlv);
+
+ return 0;
+}
+
+static struct ath10k_vif *ath10k_get_spectral_vdev(struct ath10k *ar)
+{
+ struct ath10k_vif *arvif;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ if (list_empty(&ar->arvifs))
+ return NULL;
+
+ /* if there already is a vif doing spectral, return that. */
+ list_for_each_entry(arvif, &ar->arvifs, list)
+ if (arvif->spectral_enabled)
+ return arvif;
+
+ /* otherwise, return the first vif. */
+ return list_first_entry(&ar->arvifs, typeof(*arvif), list);
+}
+
+static int ath10k_spectral_scan_trigger(struct ath10k *ar)
+{
+ struct ath10k_vif *arvif;
+ int res;
+ int vdev_id;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ arvif = ath10k_get_spectral_vdev(ar);
+ if (!arvif)
+ return -ENODEV;
+ vdev_id = arvif->vdev_id;
+
+ if (ar->spectral.mode == SPECTRAL_DISABLED)
+ return 0;
+
+ res = ath10k_wmi_vdev_spectral_enable(ar, vdev_id,
+ WMI_SPECTRAL_TRIGGER_CMD_CLEAR,
+ WMI_SPECTRAL_ENABLE_CMD_ENABLE);
+ if (res < 0)
+ return res;
+
+ res = ath10k_wmi_vdev_spectral_enable(ar, vdev_id,
+ WMI_SPECTRAL_TRIGGER_CMD_TRIGGER,
+ WMI_SPECTRAL_ENABLE_CMD_ENABLE);
+ if (res < 0)
+ return res;
+
+ return 0;
+}
+
+static int ath10k_spectral_scan_config(struct ath10k *ar,
+ enum ath10k_spectral_mode mode)
+{
+ struct wmi_vdev_spectral_conf_arg arg;
+ struct ath10k_vif *arvif;
+ int vdev_id, count, res = 0;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ arvif = ath10k_get_spectral_vdev(ar);
+ if (!arvif)
+ return -ENODEV;
+
+ vdev_id = arvif->vdev_id;
+
+ arvif->spectral_enabled = (mode != SPECTRAL_DISABLED);
+ ar->spectral.mode = mode;
+
+ res = ath10k_wmi_vdev_spectral_enable(ar, vdev_id,
+ WMI_SPECTRAL_TRIGGER_CMD_CLEAR,
+ WMI_SPECTRAL_ENABLE_CMD_DISABLE);
+ if (res < 0) {
+ ath10k_warn("failed to enable spectral scan: %d\n", res);
+ return res;
+ }
+
+ if (mode == SPECTRAL_DISABLED)
+ return 0;
+
+ if (mode == SPECTRAL_BACKGROUND)
+ count = WMI_SPECTRAL_COUNT_DEFAULT;
+ else
+ count = max_t(u8, 1, ar->spectral.config.count);
+
+ arg.vdev_id = vdev_id;
+ arg.scan_count = count;
+ arg.scan_period = WMI_SPECTRAL_PERIOD_DEFAULT;
+ arg.scan_priority = WMI_SPECTRAL_PRIORITY_DEFAULT;
+ arg.scan_fft_size = ar->spectral.config.fft_size;
+ arg.scan_gc_ena = WMI_SPECTRAL_GC_ENA_DEFAULT;
+ arg.scan_restart_ena = WMI_SPECTRAL_RESTART_ENA_DEFAULT;
+ arg.scan_noise_floor_ref = WMI_SPECTRAL_NOISE_FLOOR_REF_DEFAULT;
+ arg.scan_init_delay = WMI_SPECTRAL_INIT_DELAY_DEFAULT;
+ arg.scan_nb_tone_thr = WMI_SPECTRAL_NB_TONE_THR_DEFAULT;
+ arg.scan_str_bin_thr = WMI_SPECTRAL_STR_BIN_THR_DEFAULT;
+ arg.scan_wb_rpt_mode = WMI_SPECTRAL_WB_RPT_MODE_DEFAULT;
+ arg.scan_rssi_rpt_mode = WMI_SPECTRAL_RSSI_RPT_MODE_DEFAULT;
+ arg.scan_rssi_thr = WMI_SPECTRAL_RSSI_THR_DEFAULT;
+ arg.scan_pwr_format = WMI_SPECTRAL_PWR_FORMAT_DEFAULT;
+ arg.scan_rpt_mode = WMI_SPECTRAL_RPT_MODE_DEFAULT;
+ arg.scan_bin_scale = WMI_SPECTRAL_BIN_SCALE_DEFAULT;
+ arg.scan_dbm_adj = WMI_SPECTRAL_DBM_ADJ_DEFAULT;
+ arg.scan_chn_mask = WMI_SPECTRAL_CHN_MASK_DEFAULT;
+
+ res = ath10k_wmi_vdev_spectral_conf(ar, &arg);
+ if (res < 0) {
+ ath10k_warn("failed to configure spectral scan: %d\n", res);
+ return res;
+ }
+
+ return 0;
+}
+
+static ssize_t read_file_spec_scan_ctl(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ath10k *ar = file->private_data;
+ char *mode = "";
+ unsigned int len;
+ enum ath10k_spectral_mode spectral_mode;
+
+ mutex_lock(&ar->conf_mutex);
+ spectral_mode = ar->spectral.mode;
+ mutex_unlock(&ar->conf_mutex);
+
+ switch (spectral_mode) {
+ case SPECTRAL_DISABLED:
+ mode = "disable";
+ break;
+ case SPECTRAL_BACKGROUND:
+ mode = "background";
+ break;
+ case SPECTRAL_MANUAL:
+ mode = "manual";
+ break;
+ }
+
+ len = strlen(mode);
+ return simple_read_from_buffer(user_buf, count, ppos, mode, len);
+}
+
+static ssize_t write_file_spec_scan_ctl(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ath10k *ar = file->private_data;
+ char buf[32];
+ ssize_t len;
+ int res;
+
+ len = min(count, sizeof(buf) - 1);
+ if (copy_from_user(buf, user_buf, len))
+ return -EFAULT;
+
+ buf[len] = '\0';
+
+ mutex_lock(&ar->conf_mutex);
+
+ if (strncmp("trigger", buf, 7) == 0) {
+ if (ar->spectral.mode == SPECTRAL_MANUAL ||
+ ar->spectral.mode == SPECTRAL_BACKGROUND) {
+ /* reset the configuration to adopt possibly changed
+ * debugfs parameters
+ */
+ res = ath10k_spectral_scan_config(ar,
+ ar->spectral.mode);
+ if (res < 0) {
+ ath10k_warn("failed to reconfigure spectral scan: %d\n",
+ res);
+ }
+ res = ath10k_spectral_scan_trigger(ar);
+ if (res < 0) {
+ ath10k_warn("failed to trigger spectral scan: %d\n",
+ res);
+ }
+ } else {
+ res = -EINVAL;
+ }
+ } else if (strncmp("background", buf, 9) == 0) {
+ res = ath10k_spectral_scan_config(ar, SPECTRAL_BACKGROUND);
+ } else if (strncmp("manual", buf, 6) == 0) {
+ res = ath10k_spectral_scan_config(ar, SPECTRAL_MANUAL);
+ } else if (strncmp("disable", buf, 7) == 0) {
+ res = ath10k_spectral_scan_config(ar, SPECTRAL_DISABLED);
+ } else {
+ res = -EINVAL;
+ }
+
+ mutex_unlock(&ar->conf_mutex);
+
+ if (res < 0)
+ return res;
+
+ return count;
+}
+
+static const struct file_operations fops_spec_scan_ctl = {
+ .read = read_file_spec_scan_ctl,
+ .write = write_file_spec_scan_ctl,
+ .open = simple_open,
+ .owner = THIS_MODULE,
+ .llseek = default_llseek,
+};
+
+static ssize_t read_file_spectral_count(struct file *file,
+ char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ath10k *ar = file->private_data;
+ char buf[32];
+ unsigned int len;
+ u8 spectral_count;
+
+ mutex_lock(&ar->conf_mutex);
+ spectral_count = ar->spectral.config.count;
+ mutex_unlock(&ar->conf_mutex);
+
+ len = sprintf(buf, "%d\n", spectral_count);
+ return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static ssize_t write_file_spectral_count(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ath10k *ar = file->private_data;
+ unsigned long val;
+ char buf[32];
+ ssize_t len;
+
+ len = min(count, sizeof(buf) - 1);
+ if (copy_from_user(buf, user_buf, len))
+ return -EFAULT;
+
+ buf[len] = '\0';
+ if (kstrtoul(buf, 0, &val))
+ return -EINVAL;
+
+ if (val < 0 || val > 255)
+ return -EINVAL;
+
+ mutex_lock(&ar->conf_mutex);
+ ar->spectral.config.count = val;
+ mutex_unlock(&ar->conf_mutex);
+
+ return count;
+}
+
+static const struct file_operations fops_spectral_count = {
+ .read = read_file_spectral_count,
+ .write = write_file_spectral_count,
+ .open = simple_open,
+ .owner = THIS_MODULE,
+ .llseek = default_llseek,
+};
+
+static ssize_t read_file_spectral_bins(struct file *file,
+ char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ath10k *ar = file->private_data;
+ char buf[32];
+ unsigned int len, bins, fft_size, bin_scale;
+
+ mutex_lock(&ar->conf_mutex);
+
+ fft_size = ar->spectral.config.fft_size;
+ bin_scale = WMI_SPECTRAL_BIN_SCALE_DEFAULT;
+ bins = 1 << (fft_size - bin_scale);
+
+ mutex_unlock(&ar->conf_mutex);
+
+ len = sprintf(buf, "%d\n", bins);
+ return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static ssize_t write_file_spectral_bins(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ath10k *ar = file->private_data;
+ unsigned long val;
+ char buf[32];
+ ssize_t len;
+
+ len = min(count, sizeof(buf) - 1);
+ if (copy_from_user(buf, user_buf, len))
+ return -EFAULT;
+
+ buf[len] = '\0';
+ if (kstrtoul(buf, 0, &val))
+ return -EINVAL;
+
+ if (val < 64 || val > SPECTRAL_ATH10K_MAX_NUM_BINS)
+ return -EINVAL;
+
+ if (!is_power_of_2(val))
+ return -EINVAL;
+
+ mutex_lock(&ar->conf_mutex);
+ ar->spectral.config.fft_size = ilog2(val);
+ ar->spectral.config.fft_size += WMI_SPECTRAL_BIN_SCALE_DEFAULT;
+ mutex_unlock(&ar->conf_mutex);
+
+ return count;
+}
+
+static const struct file_operations fops_spectral_bins = {
+ .read = read_file_spectral_bins,
+ .write = write_file_spectral_bins,
+ .open = simple_open,
+ .owner = THIS_MODULE,
+ .llseek = default_llseek,
+};
+
+static struct dentry *create_buf_file_handler(const char *filename,
+ struct dentry *parent,
+ umode_t mode,
+ struct rchan_buf *buf,
+ int *is_global)
+{
+ struct dentry *buf_file;
+
+ buf_file = debugfs_create_file(filename, mode, parent, buf,
+ &relay_file_operations);
+ *is_global = 1;
+ return buf_file;
+}
+
+static int remove_buf_file_handler(struct dentry *dentry)
+{
+ debugfs_remove(dentry);
+
+ return 0;
+}
+
+static struct rchan_callbacks rfs_spec_scan_cb = {
+ .create_buf_file = create_buf_file_handler,
+ .remove_buf_file = remove_buf_file_handler,
+};
+
+int ath10k_spectral_start(struct ath10k *ar)
+{
+ struct ath10k_vif *arvif;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ list_for_each_entry(arvif, &ar->arvifs, list)
+ arvif->spectral_enabled = 0;
+
+ ar->spectral.mode = SPECTRAL_DISABLED;
+ ar->spectral.config.count = WMI_SPECTRAL_COUNT_DEFAULT;
+ ar->spectral.config.fft_size = WMI_SPECTRAL_FFT_SIZE_DEFAULT;
+
+ return 0;
+}
+
+int ath10k_spectral_vif_stop(struct ath10k_vif *arvif)
+{
+ if (!arvif->spectral_enabled)
+ return 0;
+
+ return ath10k_spectral_scan_config(arvif->ar, SPECTRAL_DISABLED);
+}
+
+int ath10k_spectral_create(struct ath10k *ar)
+{
+ ar->spectral.rfs_chan_spec_scan = relay_open("spectral_scan",
+ ar->debug.debugfs_phy,
+ 1024, 256,
+ &rfs_spec_scan_cb, NULL);
+ debugfs_create_file("spectral_scan_ctl",
+ S_IRUSR | S_IWUSR,
+ ar->debug.debugfs_phy, ar,
+ &fops_spec_scan_ctl);
+ debugfs_create_file("spectral_count",
+ S_IRUSR | S_IWUSR,
+ ar->debug.debugfs_phy, ar,
+ &fops_spectral_count);
+ debugfs_create_file("spectral_bins",
+ S_IRUSR | S_IWUSR,
+ ar->debug.debugfs_phy, ar,
+ &fops_spectral_bins);
+
+ return 0;
+}
+
+void ath10k_spectral_destroy(struct ath10k *ar)
+{
+ if (ar->spectral.rfs_chan_spec_scan) {
+ relay_close(ar->spectral.rfs_chan_spec_scan);
+ ar->spectral.rfs_chan_spec_scan = NULL;
+ }
+}
diff --git a/drivers/net/wireless/ath/ath10k/spectral.h b/drivers/net/wireless/ath/ath10k/spectral.h
new file mode 100644
index 0000000..ddc57c5
--- /dev/null
+++ b/drivers/net/wireless/ath/ath10k/spectral.h
@@ -0,0 +1,90 @@
+/*
+ * Copyright (c) 2013 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef SPECTRAL_H
+#define SPECTRAL_H
+
+#include "../spectral_common.h"
+
+/**
+ * struct ath10k_spec_scan - parameters for Atheros spectral scan
+ *
+ * @count: number of scan results requested for manual mode
+ * @fft_size: number of bins to be requested = 2^(fft_size - bin_scale)
+ */
+struct ath10k_spec_scan {
+ u8 count;
+ u8 fft_size;
+};
+
+/* enum ath10k_spectral_mode:
+ *
+ * @SPECTRAL_DISABLED: spectral mode is disabled
+ * @SPECTRAL_BACKGROUND: hardware sends samples when it is not busy with
+ * something else.
+ * @SPECTRAL_MANUAL: spectral scan is enabled, triggering for samples
+ * is performed manually.
+ */
+enum ath10k_spectral_mode {
+ SPECTRAL_DISABLED = 0,
+ SPECTRAL_BACKGROUND,
+ SPECTRAL_MANUAL,
+};
+
+#ifdef CONFIG_ATH10K_DEBUGFS
+
+int ath10k_spectral_process_fft(struct ath10k *ar,
+ struct wmi_single_phyerr_rx_event *event,
+ struct phyerr_fft_report *fftr,
+ size_t bin_len, u64 tsf);
+int ath10k_spectral_start(struct ath10k *ar);
+int ath10k_spectral_vif_stop(struct ath10k_vif *arvif);
+int ath10k_spectral_create(struct ath10k *ar);
+void ath10k_spectral_destroy(struct ath10k *ar);
+
+#else
+
+static inline int
+ath10k_spectral_process_fft(struct ath10k *ar,
+ struct wmi_single_phyerr_rx_event *event,
+ struct phyerr_fft_report *fftr,
+ size_t bin_len, u64 tsf)
+{
+ return 0;
+}
+
+static inline int ath10k_spectral_start(struct ath10k *ar)
+{
+ return 0;
+}
+
+static inline int ath10k_spectral_vif_stop(struct ath10k_vif *arvif)
+{
+ return 0;
+}
+
+static inline int ath10k_spectral_create(struct ath10k *ar)
+{
+ return 0;
+}
+
+static inline void ath10k_spectral_destroy(struct ath10k *ar)
+{
+}
+
+#endif /* CONFIG_ATH10K_DEBUGFS */
+
+#endif /* SPECTRAL_H */
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index b09661d..fffb15b 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -1780,7 +1780,54 @@ static void ath10k_wmi_event_spectral_scan(struct ath10k *ar,
struct wmi_single_phyerr_rx_event *event,
u64 tsf)
{
- ath10k_dbg(ATH10K_DBG_WMI, "wmi event spectral scan\n");
+ int buf_len, tlv_len, res, i = 0;
+ struct phyerr_tlv *tlv;
+ u8 *tlv_buf;
+ struct phyerr_fft_report *fftr;
+ size_t fftr_len;
+
+ buf_len = __le32_to_cpu(event->hdr.buf_len);
+
+ while (i < buf_len) {
+ if (i + sizeof(*tlv) > buf_len) {
+ ath10k_warn("failed to parse phyerr tlv header at byte %d\n",
+ i);
+ return;
+ }
+
+ tlv = (struct phyerr_tlv *)&event->bufp[i];
+ tlv_len = __le16_to_cpu(tlv->len);
+ tlv_buf = &event->bufp[i + sizeof(*tlv)];
+
+ if (i + sizeof(*tlv) + tlv_len > buf_len) {
+ ath10k_warn("failed to parse phyerr tlv payload at byte %d\n",
+ i);
+ return;
+ }
+
+ switch (tlv->tag) {
+ case PHYERR_TLV_TAG_SEARCH_FFT_REPORT:
+ if (sizeof(*fftr) > tlv_len) {
+ ath10k_warn("failed to parse fft report at byte %d\n",
+ i);
+ return;
+ }
+
+ fftr_len = tlv_len - sizeof(*fftr);
+ fftr = (struct phyerr_fft_report *)tlv_buf;
+ res = ath10k_spectral_process_fft(ar, event,
+ fftr, fftr_len,
+ tsf);
+ if (res < 0) {
+ ath10k_warn("failed to process fft report: %d\n",
+ res);
+ return;
+ }
+ break;
+ }
+
+ i += sizeof(*tlv) + tlv_len;
+ }
}
static void ath10k_wmi_event_phyerr(struct ath10k *ar, struct sk_buff *skb)
@@ -3576,6 +3623,62 @@ int ath10k_wmi_vdev_install_key(struct ath10k *ar,
ar->wmi.cmd->vdev_install_key_cmdid);
}
+int ath10k_wmi_vdev_spectral_conf(struct ath10k *ar,
+ const struct wmi_vdev_spectral_conf_arg *arg)
+{
+ struct wmi_vdev_spectral_conf_cmd *cmd;
+ struct sk_buff *skb;
+ u32 cmdid;
+
+ skb = ath10k_wmi_alloc_skb(sizeof(*cmd));
+ if (!skb)
+ return -ENOMEM;
+
+ cmd = (struct wmi_vdev_spectral_conf_cmd *)skb->data;
+ cmd->vdev_id = __cpu_to_le32(arg->vdev_id);
+ cmd->scan_count = __cpu_to_le32(arg->scan_count);
+ cmd->scan_period = __cpu_to_le32(arg->scan_period);
+ cmd->scan_priority = __cpu_to_le32(arg->scan_priority);
+ cmd->scan_fft_size = __cpu_to_le32(arg->scan_fft_size);
+ cmd->scan_gc_ena = __cpu_to_le32(arg->scan_gc_ena);
+ cmd->scan_restart_ena = __cpu_to_le32(arg->scan_restart_ena);
+ cmd->scan_noise_floor_ref = __cpu_to_le32(arg->scan_noise_floor_ref);
+ cmd->scan_init_delay = __cpu_to_le32(arg->scan_init_delay);
+ cmd->scan_nb_tone_thr = __cpu_to_le32(arg->scan_nb_tone_thr);
+ cmd->scan_str_bin_thr = __cpu_to_le32(arg->scan_str_bin_thr);
+ cmd->scan_wb_rpt_mode = __cpu_to_le32(arg->scan_wb_rpt_mode);
+ cmd->scan_rssi_rpt_mode = __cpu_to_le32(arg->scan_rssi_rpt_mode);
+ cmd->scan_rssi_thr = __cpu_to_le32(arg->scan_rssi_thr);
+ cmd->scan_pwr_format = __cpu_to_le32(arg->scan_pwr_format);
+ cmd->scan_rpt_mode = __cpu_to_le32(arg->scan_rpt_mode);
+ cmd->scan_bin_scale = __cpu_to_le32(arg->scan_bin_scale);
+ cmd->scan_dbm_adj = __cpu_to_le32(arg->scan_dbm_adj);
+ cmd->scan_chn_mask = __cpu_to_le32(arg->scan_chn_mask);
+
+ cmdid = ar->wmi.cmd->vdev_spectral_scan_configure_cmdid;
+ return ath10k_wmi_cmd_send(ar, skb, cmdid);
+}
+
+int ath10k_wmi_vdev_spectral_enable(struct ath10k *ar, u32 vdev_id, u32 trigger,
+ u32 enable)
+{
+ struct wmi_vdev_spectral_enable_cmd *cmd;
+ struct sk_buff *skb;
+ u32 cmdid;
+
+ skb = ath10k_wmi_alloc_skb(sizeof(*cmd));
+ if (!skb)
+ return -ENOMEM;
+
+ cmd = (struct wmi_vdev_spectral_enable_cmd *)skb->data;
+ cmd->vdev_id = __cpu_to_le32(vdev_id);
+ cmd->trigger_cmd = __cpu_to_le32(trigger);
+ cmd->enable_cmd = __cpu_to_le32(enable);
+
+ cmdid = ar->wmi.cmd->vdev_spectral_scan_enable_cmdid;
+ return ath10k_wmi_cmd_send(ar, skb, cmdid);
+}
+
int ath10k_wmi_peer_create(struct ath10k *ar, u32 vdev_id,
const u8 peer_addr[ETH_ALEN])
{
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index c9ac11c..1d8dda3 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -2247,6 +2247,7 @@ struct wmi_comb_phyerr_rx_event {
#define PHYERR_TLV_SIG 0xBB
#define PHYERR_TLV_TAG_SEARCH_FFT_REPORT 0xFB
#define PHYERR_TLV_TAG_RADAR_PULSE_SUMMARY 0xF8
+#define PHYERR_TLV_TAG_SPECTRAL_SUMMARY_REPORT 0xF9
struct phyerr_radar_report {
__le32 reg0; /* RADAR_REPORT_REG0_* */
@@ -3645,6 +3646,98 @@ struct wmi_vdev_simple_event {
/* unsupported VDEV combination */
#define WMI_INIFIED_VDEV_START_RESPONSE_NOT_SUPPORTED 0x2
+/* TODO: please add more comments if you have in-depth information */
+struct wmi_vdev_spectral_conf_cmd {
+ __le32 vdev_id;
+
+ /* number of fft samples to send (0 for infinite) */
+ __le32 scan_count;
+ __le32 scan_period;
+ __le32 scan_priority;
+
+ /* number of bins in the FFT: 2^(fft_size - bin_scale) */
+ __le32 scan_fft_size;
+ __le32 scan_gc_ena;
+ __le32 scan_restart_ena;
+ __le32 scan_noise_floor_ref;
+ __le32 scan_init_delay;
+ __le32 scan_nb_tone_thr;
+ __le32 scan_str_bin_thr;
+ __le32 scan_wb_rpt_mode;
+ __le32 scan_rssi_rpt_mode;
+ __le32 scan_rssi_thr;
+ __le32 scan_pwr_format;
+
+ /* rpt_mode: Format of FFT report to software for spectral scan
+ * triggered FFTs:
+ * 0: No FFT report (only spectral scan summary report)
+ * 1: 2-dword summary of metrics for each completed FFT + spectral
+ * scan summary report
+ * 2: 2-dword summary of metrics for each completed FFT +
+ * 1x- oversampled bins(in-band) per FFT + spectral scan summary
+ * report
+ * 3: 2-dword summary of metrics for each completed FFT +
+ * 2x- oversampled bins (all) per FFT + spectral scan summary
+ */
+ __le32 scan_rpt_mode;
+ __le32 scan_bin_scale;
+ __le32 scan_dbm_adj;
+ __le32 scan_chn_mask;
+} __packed;
+
+struct wmi_vdev_spectral_conf_arg {
+ u32 vdev_id;
+ u32 scan_count;
+ u32 scan_period;
+ u32 scan_priority;
+ u32 scan_fft_size;
+ u32 scan_gc_ena;
+ u32 scan_restart_ena;
+ u32 scan_noise_floor_ref;
+ u32 scan_init_delay;
+ u32 scan_nb_tone_thr;
+ u32 scan_str_bin_thr;
+ u32 scan_wb_rpt_mode;
+ u32 scan_rssi_rpt_mode;
+ u32 scan_rssi_thr;
+ u32 scan_pwr_format;
+ u32 scan_rpt_mode;
+ u32 scan_bin_scale;
+ u32 scan_dbm_adj;
+ u32 scan_chn_mask;
+};
+
+#define WMI_SPECTRAL_ENABLE_DEFAULT 0
+#define WMI_SPECTRAL_COUNT_DEFAULT 0
+#define WMI_SPECTRAL_PERIOD_DEFAULT 35
+#define WMI_SPECTRAL_PRIORITY_DEFAULT 1
+#define WMI_SPECTRAL_FFT_SIZE_DEFAULT 7
+#define WMI_SPECTRAL_GC_ENA_DEFAULT 1
+#define WMI_SPECTRAL_RESTART_ENA_DEFAULT 0
+#define WMI_SPECTRAL_NOISE_FLOOR_REF_DEFAULT -96
+#define WMI_SPECTRAL_INIT_DELAY_DEFAULT 80
+#define WMI_SPECTRAL_NB_TONE_THR_DEFAULT 12
+#define WMI_SPECTRAL_STR_BIN_THR_DEFAULT 8
+#define WMI_SPECTRAL_WB_RPT_MODE_DEFAULT 0
+#define WMI_SPECTRAL_RSSI_RPT_MODE_DEFAULT 0
+#define WMI_SPECTRAL_RSSI_THR_DEFAULT 0xf0
+#define WMI_SPECTRAL_PWR_FORMAT_DEFAULT 0
+#define WMI_SPECTRAL_RPT_MODE_DEFAULT 2
+#define WMI_SPECTRAL_BIN_SCALE_DEFAULT 1
+#define WMI_SPECTRAL_DBM_ADJ_DEFAULT 1
+#define WMI_SPECTRAL_CHN_MASK_DEFAULT 1
+
+struct wmi_vdev_spectral_enable_cmd {
+ __le32 vdev_id;
+ __le32 trigger_cmd;
+ __le32 enable_cmd;
+} __packed;
+
+#define WMI_SPECTRAL_TRIGGER_CMD_TRIGGER 1
+#define WMI_SPECTRAL_TRIGGER_CMD_CLEAR 2
+#define WMI_SPECTRAL_ENABLE_CMD_ENABLE 1
+#define WMI_SPECTRAL_ENABLE_CMD_DISABLE 2
+
/* Beacon processing related command and event structures */
struct wmi_bcn_tx_hdr {
__le32 vdev_id;
@@ -4517,6 +4610,10 @@ int ath10k_wmi_vdev_set_param(struct ath10k *ar, u32 vdev_id,
u32 param_id, u32 param_value);
int ath10k_wmi_vdev_install_key(struct ath10k *ar,
const struct wmi_vdev_install_key_arg *arg);
+int ath10k_wmi_vdev_spectral_conf(struct ath10k *ar,
+ const struct wmi_vdev_spectral_conf_arg *arg);
+int ath10k_wmi_vdev_spectral_enable(struct ath10k *ar, u32 vdev_id, u32 trigger,
+ u32 enable);
int ath10k_wmi_peer_create(struct ath10k *ar, u32 vdev_id,
const u8 peer_addr[ETH_ALEN]);
int ath10k_wmi_peer_delete(struct ath10k *ar, u32 vdev_id,
diff --git a/drivers/net/wireless/ath/spectral_common.h b/drivers/net/wireless/ath/spectral_common.h
index b9ab722..0d742ac 100644
--- a/drivers/net/wireless/ath/spectral_common.h
+++ b/drivers/net/wireless/ath/spectral_common.h
@@ -20,6 +20,11 @@
#define SPECTRAL_HT20_NUM_BINS 56
#define SPECTRAL_HT20_40_NUM_BINS 128
+/* TODO: could possibly be 512, but no samples this large
+ * could be acquired so far.
+ */
+#define SPECTRAL_ATH10K_MAX_NUM_BINS 256
+
/* FFT sample format given to userspace via debugfs.
*
* Please keep the type/length at the front position and change
@@ -31,6 +36,7 @@
enum ath_fft_sample_type {
ATH_FFT_SAMPLE_HT20 = 1,
ATH_FFT_SAMPLE_HT20_40,
+ ATH_FFT_SAMPLE_ATH10K,
};
struct fft_sample_tlv {
@@ -85,4 +91,23 @@ struct fft_sample_ht20_40 {
u8 data[SPECTRAL_HT20_40_NUM_BINS];
} __packed;
+struct fft_sample_ath10k {
+ struct fft_sample_tlv tlv;
+ u8 chan_width_mhz;
+ __be16 freq1;
+ __be16 freq2;
+ __be16 noise;
+ __be16 max_magnitude;
+ __be16 total_gain_db;
+ __be16 base_pwr_db;
+ __be64 tsf;
+ s8 max_index;
+ u8 rssi;
+ u8 relpwr_db;
+ u8 avgpwr_db;
+ u8 max_exp;
+
+ u8 data[0];
+} __packed;
+
#endif /* SPECTRAL_COMMON_H */
--
1.9.1
From: Sven Eckelmann <[email protected]>
The ath9k and ath10k will share the definitions of the debugfs spectral
structures and enums. Having them in the same place helps to avoid conflicts.
Signed-off-by: Sven Eckelmann <[email protected]>
Signed-off-by: Simon Wunderlich <[email protected]>
Signed-off-by: Mathias Kretschmer <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
---
drivers/net/wireless/ath/ath9k/spectral.h | 71 +-----------------------
drivers/net/wireless/ath/spectral_common.h | 88 ++++++++++++++++++++++++++++++
2 files changed, 90 insertions(+), 69 deletions(-)
create mode 100644 drivers/net/wireless/ath/spectral_common.h
diff --git a/drivers/net/wireless/ath/ath9k/spectral.h b/drivers/net/wireless/ath/ath9k/spectral.h
index ead6341..7b410c6 100644
--- a/drivers/net/wireless/ath/ath9k/spectral.h
+++ b/drivers/net/wireless/ath/ath9k/spectral.h
@@ -17,6 +17,8 @@
#ifndef SPECTRAL_H
#define SPECTRAL_H
+#include "../spectral_common.h"
+
/* enum spectral_mode:
*
* @SPECTRAL_DISABLED: spectral mode is disabled
@@ -54,8 +56,6 @@ struct ath_ht20_mag_info {
u8 max_exp;
} __packed;
-#define SPECTRAL_HT20_NUM_BINS 56
-
/* WARNING: don't actually use this struct! MAC may vary the amount of
* data by -1/+2. This struct is for reference only.
*/
@@ -83,8 +83,6 @@ struct ath_ht20_40_mag_info {
u8 max_exp;
} __packed;
-#define SPECTRAL_HT20_40_NUM_BINS 128
-
/* WARNING: don't actually use this struct! MAC may vary the amount of
* data. This struct is for reference only.
*/
@@ -125,71 +123,6 @@ static inline u8 spectral_bitmap_weight(u8 *bins)
return bins[0] & 0x3f;
}
-/* FFT sample format given to userspace via debugfs.
- *
- * Please keep the type/length at the front position and change
- * other fields after adding another sample type
- *
- * TODO: this might need rework when switching to nl80211-based
- * interface.
- */
-enum ath_fft_sample_type {
- ATH_FFT_SAMPLE_HT20 = 1,
- ATH_FFT_SAMPLE_HT20_40,
-};
-
-struct fft_sample_tlv {
- u8 type; /* see ath_fft_sample */
- __be16 length;
- /* type dependent data follows */
-} __packed;
-
-struct fft_sample_ht20 {
- struct fft_sample_tlv tlv;
-
- u8 max_exp;
-
- __be16 freq;
- s8 rssi;
- s8 noise;
-
- __be16 max_magnitude;
- u8 max_index;
- u8 bitmap_weight;
-
- __be64 tsf;
-
- u8 data[SPECTRAL_HT20_NUM_BINS];
-} __packed;
-
-struct fft_sample_ht20_40 {
- struct fft_sample_tlv tlv;
-
- u8 channel_type;
- __be16 freq;
-
- s8 lower_rssi;
- s8 upper_rssi;
-
- __be64 tsf;
-
- s8 lower_noise;
- s8 upper_noise;
-
- __be16 lower_max_magnitude;
- __be16 upper_max_magnitude;
-
- u8 lower_max_index;
- u8 upper_max_index;
-
- u8 lower_bitmap_weight;
- u8 upper_bitmap_weight;
-
- u8 max_exp;
-
- u8 data[SPECTRAL_HT20_40_NUM_BINS];
-} __packed;
-
void ath9k_spectral_init_debug(struct ath_softc *sc);
void ath9k_spectral_deinit_debug(struct ath_softc *sc);
diff --git a/drivers/net/wireless/ath/spectral_common.h b/drivers/net/wireless/ath/spectral_common.h
new file mode 100644
index 0000000..b9ab722
--- /dev/null
+++ b/drivers/net/wireless/ath/spectral_common.h
@@ -0,0 +1,88 @@
+/*
+ * Copyright (c) 2013 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef SPECTRAL_COMMON_H
+#define SPECTRAL_COMMON_H
+
+#define SPECTRAL_HT20_NUM_BINS 56
+#define SPECTRAL_HT20_40_NUM_BINS 128
+
+/* FFT sample format given to userspace via debugfs.
+ *
+ * Please keep the type/length at the front position and change
+ * other fields after adding another sample type
+ *
+ * TODO: this might need rework when switching to nl80211-based
+ * interface.
+ */
+enum ath_fft_sample_type {
+ ATH_FFT_SAMPLE_HT20 = 1,
+ ATH_FFT_SAMPLE_HT20_40,
+};
+
+struct fft_sample_tlv {
+ u8 type; /* see ath_fft_sample */
+ __be16 length;
+ /* type dependent data follows */
+} __packed;
+
+struct fft_sample_ht20 {
+ struct fft_sample_tlv tlv;
+
+ u8 max_exp;
+
+ __be16 freq;
+ s8 rssi;
+ s8 noise;
+
+ __be16 max_magnitude;
+ u8 max_index;
+ u8 bitmap_weight;
+
+ __be64 tsf;
+
+ u8 data[SPECTRAL_HT20_NUM_BINS];
+} __packed;
+
+struct fft_sample_ht20_40 {
+ struct fft_sample_tlv tlv;
+
+ u8 channel_type;
+ __be16 freq;
+
+ s8 lower_rssi;
+ s8 upper_rssi;
+
+ __be64 tsf;
+
+ s8 lower_noise;
+ s8 upper_noise;
+
+ __be16 lower_max_magnitude;
+ __be16 upper_max_magnitude;
+
+ u8 lower_max_index;
+ u8 upper_max_index;
+
+ u8 lower_bitmap_weight;
+ u8 upper_bitmap_weight;
+
+ u8 max_exp;
+
+ u8 data[SPECTRAL_HT20_40_NUM_BINS];
+} __packed;
+
+#endif /* SPECTRAL_COMMON_H */
--
1.9.1
On Fri, Aug 1, 2014 at 6:17 AM, Simon Wunderlich <[email protected]> wrote:
> To view the samples, please have a look at the fft_eval tool [1] which
> now supports both ath9k and ath10k formats.
Can you please edit the ath9k and ath10k wiki about this tool and
reference to it?
Luis
Simon Wunderlich <[email protected]> writes:
> This is the fifth "PATCH" patchset iteration for the ath10k spectral
> scan feature. It includes a small change compared to Kalles PATCHv4
> series: the parameter initialization has been moved to
> ath10k_spectral_start() so that the parameters also get reset when the
> firmware crashes.
>
> To view the samples, please have a look at the fft_eval tool [1] which
> now supports both ath9k and ath10k formats.
>
> The count issue is still open: Even when a count is specified, the
> hardware seems to send endless samples. It seems to work most of the
> time in VHT80 mode though, but in HT20 and HT40 the count value seems
> to be ignored. To reproduce this, start hostapd with the desired
> channel width and do:
>
> echo 8 > /sys/kernel/debug/ieee80211/phy0/ath10k/spectral_count
> echo manual > /sys/kernel/debug/ieee80211/phy0/ath10k/spectral_scan_ctl
> echo trigger > /sys/kernel/debug/ieee80211/phy0/ath10k/spectral_scan_ctl
> cat /sys/kernel/debug/ieee80211/phy0/ath10k/spectral_scan0 >> /tmp/fft.dump
>
> Repeating the last line and checking the filesize will easily show
> whether ath10k still sends samples or not. We would expect 8 samples in
> this configuration.
>
> Please see the patches for more information on the changes.
>
> Cheers,
> Simon
>
> [1] https://github.com/simonwunderlich/FFT_eval
>
> Simon Wunderlich (1):
> ath10k: add spectral scan feature
>
> Sven Eckelmann (1):
> ath: Move spectral debugfs structs to shared header
Thanks, both patches applied.
And thanks for fixing a bug I introduced!
--
Kalle Valo
On Mon, Aug 4, 2014 at 10:26 AM, Luis R. Rodriguez
<[email protected]> wrote:
> On Fri, Aug 1, 2014 at 6:17 AM, Simon Wunderlich <[email protected]> wrote:
>> To view the samples, please have a look at the fft_eval tool [1] which
>> now supports both ath9k and ath10k formats.
>
> Can you please edit the ath9k and ath10k wiki about this tool and
> reference to it?
While at it also please update the iw wiki page too.
Luis