Enable pulse detection on extension channel if 40MHz channel width has been set
Signed-off-by: Lorenzo Bianconi <[email protected]>
---
drivers/net/wireless/ath/ath9k/hw.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index ef5f5a6..6bbc2be 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1956,6 +1956,7 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
if (ah->hw->conf.radar_enabled) {
/* set HW specific DFS configuration */
+ ah->radar_conf.ext_channel = IS_CHAN_HT40(chan);
ath9k_hw_set_radar_params(ah);
}
--
1.9.1