2014-10-06 05:09:53

by Avinash Patil

[permalink] [raw]
Subject: [PATCH 2/2] mwifiex: add support for SD8887 chipset

This patch adds SD8887 support to mwifiex.
SD8887 is Marvell's 1x1 11ac solution.

The corresponding firmware image file is located at:
"mrvl/sd8887_uapsta.bin"

Signed-off-by: Avinash Patil <[email protected]>
Signed-off-by: Cathy Luo <[email protected]>
Signed-off-by: Frank Huang <[email protected]>
---
drivers/net/wireless/mwifiex/Kconfig | 4 +--
drivers/net/wireless/mwifiex/sdio.c | 5 ++++
drivers/net/wireless/mwifiex/sdio.h | 55 ++++++++++++++++++++++++++++++++++++
3 files changed, 62 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/mwifiex/Kconfig b/drivers/net/wireless/mwifiex/Kconfig
index ecdf345..e70d0df 100644
--- a/drivers/net/wireless/mwifiex/Kconfig
+++ b/drivers/net/wireless/mwifiex/Kconfig
@@ -9,12 +9,12 @@ config MWIFIEX
mwifiex.

config MWIFIEX_SDIO
- tristate "Marvell WiFi-Ex Driver for SD8786/SD8787/SD8797/SD8897"
+ tristate "Marvell WiFi-Ex Driver for SD8786/SD8787/SD8797/SD8887/SD8897"
depends on MWIFIEX && MMC
select FW_LOADER
---help---
This adds support for wireless adapters based on Marvell
- 8786/8787/8797 chipsets with SDIO interface.
+ 8786/8787/8797/8887/8897 chipsets with SDIO interface.

If you choose to build it as a module, it will be called
mwifiex_sdio.
diff --git a/drivers/net/wireless/mwifiex/sdio.c b/drivers/net/wireless/mwifiex/sdio.c
index a22e9a9..b25766b 100644
--- a/drivers/net/wireless/mwifiex/sdio.c
+++ b/drivers/net/wireless/mwifiex/sdio.c
@@ -279,6 +279,8 @@ static int mwifiex_sdio_suspend(struct device *dev)
#define SDIO_DEVICE_ID_MARVELL_8797 (0x9129)
/* Device ID for SD8897 */
#define SDIO_DEVICE_ID_MARVELL_8897 (0x912d)
+/* Device ID for SD8887 */
+#define SDIO_DEVICE_ID_MARVELL_8887 (0x9135)

/* WLAN IDs */
static const struct sdio_device_id mwifiex_ids[] = {
@@ -290,6 +292,8 @@ static const struct sdio_device_id mwifiex_ids[] = {
.driver_data = (unsigned long) &mwifiex_sdio_sd8797},
{SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8897),
.driver_data = (unsigned long) &mwifiex_sdio_sd8897},
+ {SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8887),
+ .driver_data = (unsigned long)&mwifiex_sdio_sd8887},
{},
};

@@ -2233,3 +2237,4 @@ MODULE_FIRMWARE(SD8786_DEFAULT_FW_NAME);
MODULE_FIRMWARE(SD8787_DEFAULT_FW_NAME);
MODULE_FIRMWARE(SD8797_DEFAULT_FW_NAME);
MODULE_FIRMWARE(SD8897_DEFAULT_FW_NAME);
+MODULE_FIRMWARE(SD8887_DEFAULT_FW_NAME);
diff --git a/drivers/net/wireless/mwifiex/sdio.h b/drivers/net/wireless/mwifiex/sdio.h
index 5a08ebc..20cd9ad 100644
--- a/drivers/net/wireless/mwifiex/sdio.h
+++ b/drivers/net/wireless/mwifiex/sdio.h
@@ -33,6 +33,7 @@
#define SD8787_DEFAULT_FW_NAME "mrvl/sd8787_uapsta.bin"
#define SD8797_DEFAULT_FW_NAME "mrvl/sd8797_uapsta.bin"
#define SD8897_DEFAULT_FW_NAME "mrvl/sd8897_uapsta.bin"
+#define SD8887_DEFAULT_FW_NAME "mrvl/sd8887_uapsta.bin"

#define BLOCK_MODE 1
#define BYTE_MODE 0
@@ -334,6 +335,47 @@ static const struct mwifiex_sdio_card_reg mwifiex_reg_sd8897 = {
.fw_dump_end = 0xea,
};

+static const struct mwifiex_sdio_card_reg mwifiex_reg_sd8887 = {
+ .start_rd_port = 0,
+ .start_wr_port = 0,
+ .base_0_reg = 0x6C,
+ .base_1_reg = 0x6D,
+ .poll_reg = 0x5C,
+ .host_int_enable = UP_LD_HOST_INT_MASK | DN_LD_HOST_INT_MASK |
+ CMD_PORT_UPLD_INT_MASK | CMD_PORT_DNLD_INT_MASK,
+ .host_int_rsr_reg = 0x4,
+ .host_int_status_reg = 0x0C,
+ .host_int_mask_reg = 0x08,
+ .status_reg_0 = 0x90,
+ .status_reg_1 = 0x91,
+ .sdio_int_mask = 0xff,
+ .data_port_mask = 0xffffffff,
+ .io_port_0_reg = 0xE4,
+ .io_port_1_reg = 0xE5,
+ .io_port_2_reg = 0xE6,
+ .max_mp_regs = 196,
+ .rd_bitmap_l = 0x10,
+ .rd_bitmap_u = 0x11,
+ .rd_bitmap_1l = 0x12,
+ .rd_bitmap_1u = 0x13,
+ .wr_bitmap_l = 0x14,
+ .wr_bitmap_u = 0x15,
+ .wr_bitmap_1l = 0x16,
+ .wr_bitmap_1u = 0x17,
+ .rd_len_p0_l = 0x18,
+ .rd_len_p0_u = 0x19,
+ .card_misc_cfg_reg = 0xd8,
+ .card_cfg_2_1_reg = 0xd9,
+ .cmd_rd_len_0 = 0xc0,
+ .cmd_rd_len_1 = 0xc1,
+ .cmd_rd_len_2 = 0xc2,
+ .cmd_rd_len_3 = 0xc3,
+ .cmd_cfg_0 = 0xc4,
+ .cmd_cfg_1 = 0xc5,
+ .cmd_cfg_2 = 0xc6,
+ .cmd_cfg_3 = 0xc7,
+};
+
static const struct mwifiex_sdio_device mwifiex_sdio_sd8786 = {
.firmware = SD8786_DEFAULT_FW_NAME,
.reg = &mwifiex_reg_sd87xx,
@@ -386,6 +428,19 @@ static const struct mwifiex_sdio_device mwifiex_sdio_sd8897 = {
.supports_fw_dump = true,
};

+static const struct mwifiex_sdio_device mwifiex_sdio_sd8887 = {
+ .firmware = SD8887_DEFAULT_FW_NAME,
+ .reg = &mwifiex_reg_sd8887,
+ .max_ports = 32,
+ .mp_agg_pkt_limit = 16,
+ .supports_sdio_new_mode = true,
+ .has_control_mask = false,
+ .tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_4K,
+ .mp_tx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_32K,
+ .mp_rx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_32K,
+ .supports_fw_dump = false,
+};
+
/*
* .cmdrsp_complete handler
*/
--
1.8.1.4