In some cases the limit may be the same as reg->power_limit, but the
actual value that the hardware uses is not up to date. In that case, a
wrong value for current tx power is tracked internally.
Fix this by unconditionally updating it.
Signed-off-by: Felix Fietkau <[email protected]>
---
drivers/net/wireless/ath/ath9k/common.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/common.c b/drivers/net/wireless/ath/ath9k/common.c
index c6dd7f1..33b0c7a 100644
--- a/drivers/net/wireless/ath/ath9k/common.c
+++ b/drivers/net/wireless/ath/ath9k/common.c
@@ -368,11 +368,11 @@ void ath9k_cmn_update_txpow(struct ath_hw *ah, u16 cur_txpow,
{
struct ath_regulatory *reg = ath9k_hw_regulatory(ah);
- if (reg->power_limit != new_txpow) {
+ if (reg->power_limit != new_txpow)
ath9k_hw_set_txpowerlimit(ah, new_txpow, false);
- /* read back in case value is clamped */
- *txpower = reg->max_power_level;
- }
+
+ /* read back in case value is clamped */
+ *txpower = reg->max_power_level;
}
EXPORT_SYMBOL(ath9k_cmn_update_txpow);
--
2.0.4