From: Sujith Manoharan <[email protected]>
ath9k patches for -next.
Sujith Manoharan (9):
ath9k: Move MCI registers to reg_mci.h
ath9k: Remove useless check in MCI reset
ath9k: Add new MCI configuration parameters
ath9k: Handle 2-ANT AR9565 in MCI reset
ath9k: Fix MCI TX control
ath9k: Setup MCI statistics properly
ath9k: Prepare MCI interface correctly
ath9k: Fix GPM initialization
ath9k: Mute BT properly
drivers/net/wireless/ath/ath9k/ar9003_mci.c | 158 ++++++++++----
drivers/net/wireless/ath/ath9k/ar9003_mci.h | 24 ++-
drivers/net/wireless/ath/ath9k/hw.h | 1 +
drivers/net/wireless/ath/ath9k/mci.c | 5 +-
drivers/net/wireless/ath/ath9k/reg.h | 275 ------------------------
drivers/net/wireless/ath/ath9k/reg_mci.h | 310 ++++++++++++++++++++++++++++
6 files changed, 449 insertions(+), 324 deletions(-)
create mode 100644 drivers/net/wireless/ath/ath9k/reg_mci.h
--
2.3.0
From: Sujith Manoharan <[email protected]>
Handle MCI_STATE_INIT_GPM_OFFSET separately and do not
overload ar9003_mci_get_next_gpm_offset() with a special
case.
Signed-off-by: Sujith Manoharan <[email protected]>
---
drivers/net/wireless/ath/ath9k/ar9003_mci.c | 27 +++++++++++++--------------
drivers/net/wireless/ath/ath9k/ar9003_mci.h | 2 +-
drivers/net/wireless/ath/ath9k/mci.c | 5 ++---
3 files changed, 16 insertions(+), 18 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mci.c b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
index 505dfe3..133b867 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_mci.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
@@ -593,7 +593,7 @@ static u32 ar9003_mci_wait_for_gpm(struct ath_hw *ah, u8 gpm_type,
if (!time_out)
break;
- offset = ar9003_mci_get_next_gpm_offset(ah, false, &more_data);
+ offset = ar9003_mci_get_next_gpm_offset(ah, &more_data);
if (offset == MCI_GPM_INVALID)
continue;
@@ -657,7 +657,7 @@ static u32 ar9003_mci_wait_for_gpm(struct ath_hw *ah, u8 gpm_type,
time_out = 0;
while (more_data == MCI_GPM_MORE) {
- offset = ar9003_mci_get_next_gpm_offset(ah, false, &more_data);
+ offset = ar9003_mci_get_next_gpm_offset(ah, &more_data);
if (offset == MCI_GPM_INVALID)
break;
@@ -986,7 +986,8 @@ int ar9003_mci_reset(struct ath_hw *ah, bool en_int, bool is_2g,
regval &= ~SM(1, AR_MCI_COMMAND2_RESET_RX);
REG_WRITE(ah, AR_MCI_COMMAND2, regval);
- ar9003_mci_get_next_gpm_offset(ah, true, NULL);
+ /* Init GPM offset after MCI Reset Rx */
+ ar9003_mci_state(ah, MCI_STATE_INIT_GPM_OFFSET);
REG_WRITE(ah, AR_MCI_MSG_ATTRIBUTES_TABLE,
(SM(0xe801, AR_MCI_MSG_ATTRIBUTES_TABLE_INVALID_HDR) |
@@ -1280,6 +1281,14 @@ u32 ar9003_mci_state(struct ath_hw *ah, u32 state_type)
}
value &= AR_BTCOEX_CTRL_MCI_MODE_EN;
break;
+ case MCI_STATE_INIT_GPM_OFFSET:
+ value = MS(REG_READ(ah, AR_MCI_GPM_1), AR_MCI_GPM_WRITE_PTR);
+
+ if (value < mci->gpm_len)
+ mci->gpm_idx = value;
+ else
+ mci->gpm_idx = 0;
+ break;
case MCI_STATE_LAST_SCHD_MSG_OFFSET:
value = MS(REG_READ(ah, AR_MCI_RX_STATUS),
AR_MCI_RX_LAST_SCHD_MSG_INDEX);
@@ -1426,21 +1435,11 @@ void ar9003_mci_check_gpm_offset(struct ath_hw *ah)
mci->gpm_idx = 0;
}
-u32 ar9003_mci_get_next_gpm_offset(struct ath_hw *ah, bool first, u32 *more)
+u32 ar9003_mci_get_next_gpm_offset(struct ath_hw *ah, u32 *more)
{
struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
u32 offset, more_gpm = 0, gpm_ptr;
- if (first) {
- gpm_ptr = MS(REG_READ(ah, AR_MCI_GPM_1), AR_MCI_GPM_WRITE_PTR);
-
- if (gpm_ptr >= mci->gpm_len)
- gpm_ptr = 0;
-
- mci->gpm_idx = gpm_ptr;
- return gpm_ptr;
- }
-
/*
* This could be useful to avoid new GPM message interrupt which
* may lead to spurious interrupt after power sleep, or multiple
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mci.h b/drivers/net/wireless/ath/ath9k/ar9003_mci.h
index 174ebea..e288611 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_mci.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_mci.h
@@ -312,7 +312,7 @@ int ar9003_mci_setup(struct ath_hw *ah, u32 gpm_addr, void *gpm_buf,
void ar9003_mci_cleanup(struct ath_hw *ah);
void ar9003_mci_get_interrupt(struct ath_hw *ah, u32 *raw_intr,
u32 *rx_msg_intr);
-u32 ar9003_mci_get_next_gpm_offset(struct ath_hw *ah, bool first, u32 *more);
+u32 ar9003_mci_get_next_gpm_offset(struct ath_hw *ah, u32 *more);
void ar9003_mci_set_bt_version(struct ath_hw *ah, u8 major, u8 minor);
void ar9003_mci_send_wlan_channels(struct ath_hw *ah);
/*
diff --git a/drivers/net/wireless/ath/ath9k/mci.c b/drivers/net/wireless/ath/ath9k/mci.c
index 3f7a11e..66596b9 100644
--- a/drivers/net/wireless/ath/ath9k/mci.c
+++ b/drivers/net/wireless/ath/ath9k/mci.c
@@ -495,7 +495,7 @@ void ath_mci_intr(struct ath_softc *sc)
ar9003_mci_get_interrupt(sc->sc_ah, &mci_int, &mci_int_rxmsg);
if (ar9003_mci_state(ah, MCI_STATE_ENABLE) == 0) {
- ar9003_mci_get_next_gpm_offset(ah, true, NULL);
+ ar9003_mci_state(ah, MCI_STATE_INIT_GPM_OFFSET);
return;
}
@@ -559,8 +559,7 @@ void ath_mci_intr(struct ath_softc *sc)
return;
pgpm = mci->gpm_buf.bf_addr;
- offset = ar9003_mci_get_next_gpm_offset(ah, false,
- &more_data);
+ offset = ar9003_mci_get_next_gpm_offset(ah, &more_data);
if (offset == MCI_GPM_INVALID)
break;
--
2.3.0
From: Sujith Manoharan <[email protected]>
Set The BT/WLAN priority weights correctly and make sure
that MCI_LNA_TAKE is sent only for cards that share
PA/LNA.
Signed-off-by: Sujith Manoharan <[email protected]>
---
drivers/net/wireless/ath/ath9k/ar9003_mci.c | 13 ++++++++++---
drivers/net/wireless/ath/ath9k/reg_mci.h | 5 +++++
2 files changed, 15 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mci.c b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
index 133b867..bd169fa 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_mci.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
@@ -771,8 +771,14 @@ exit:
static void ar9003_mci_mute_bt(struct ath_hw *ah)
{
+ struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
+
/* disable all MCI messages */
REG_WRITE(ah, AR_MCI_MSG_ATTRIBUTES_TABLE, 0xffff0000);
+ REG_WRITE(ah, AR_BTCOEX_WL_WEIGHTS0, 0xffffffff);
+ REG_WRITE(ah, AR_BTCOEX_WL_WEIGHTS1, 0xffffffff);
+ REG_WRITE(ah, AR_BTCOEX_WL_WEIGHTS2, 0xffffffff);
+ REG_WRITE(ah, AR_BTCOEX_WL_WEIGHTS3, 0xffffffff);
REG_SET_BIT(ah, AR_MCI_TX_CTRL, AR_MCI_TX_CTRL_DISABLE_LNA_UPDATE);
/* wait pending HW messages to flush out */
@@ -783,9 +789,10 @@ static void ar9003_mci_mute_bt(struct ath_hw *ah)
* 1. reset not after resuming from full sleep
* 2. before reset MCI RX, to quiet BT and avoid MCI RX misalignment
*/
- ar9003_mci_send_lna_take(ah, true);
-
- udelay(5);
+ if (MCI_ANT_ARCH_PA_LNA_SHARED(mci)) {
+ ar9003_mci_send_lna_take(ah, true);
+ udelay(5);
+ }
ar9003_mci_send_sys_sleeping(ah, true);
}
diff --git a/drivers/net/wireless/ath/ath9k/reg_mci.h b/drivers/net/wireless/ath/ath9k/reg_mci.h
index 3bd7c21..6251310 100644
--- a/drivers/net/wireless/ath/ath9k/reg_mci.h
+++ b/drivers/net/wireless/ath/ath9k/reg_mci.h
@@ -212,6 +212,11 @@
#define AR_BTCOEX_CTRL_SPDT_POLARITY 0x80000000
#define AR_BTCOEX_CTRL_SPDT_POLARITY_S 31
+#define AR_BTCOEX_WL_WEIGHTS0 0x18b0
+#define AR_BTCOEX_WL_WEIGHTS1 0x18b4
+#define AR_BTCOEX_WL_WEIGHTS2 0x18b8
+#define AR_BTCOEX_WL_WEIGHTS3 0x18bc
+
#define AR_BTCOEX_MAX_TXPWR(_x) (0x18c0 + ((_x) << 2))
#define AR_BTCOEX_WL_LNA 0x1940
#define AR_BTCOEX_RFGAIN_CTRL 0x1944
--
2.3.0
From: Sujith Manoharan <[email protected]>
The LNA_TRANS message needs to be sent only for
chips which have shared PA/LNA.
Signed-off-by: Sujith Manoharan <[email protected]>
---
drivers/net/wireless/ath/ath9k/ar9003_mci.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mci.c b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
index de65ce1..505dfe3 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_mci.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
@@ -284,12 +284,12 @@ static void ar9003_mci_prep_interface(struct ath_hw *ah)
AR_MCI_INTERRUPT_RX_MSG_CONT_RST);
REG_WRITE(ah, AR_MCI_INTERRUPT_RAW, AR_MCI_INTERRUPT_BT_PRI);
- if (mci->is_2g) {
+ if (mci->is_2g && MCI_ANT_ARCH_PA_LNA_SHARED(mci)) {
ar9003_mci_send_lna_transfer(ah, true);
udelay(5);
}
- if ((mci->is_2g && !mci->update_2g5g)) {
+ if (mci->is_2g && !mci->update_2g5g && MCI_ANT_ARCH_PA_LNA_SHARED(mci)) {
if (ar9003_mci_wait_for_interrupt(ah,
AR_MCI_INTERRUPT_RX_MSG_RAW,
AR_MCI_INTERRUPT_RX_MSG_LNA_INFO,
--
2.3.0
From: Sujith Manoharan <[email protected]>
This patch makes sure that the antenna configuration
is used properly when setting AR_MCI_TX_CTRL.
Signed-off-by: Sujith Manoharan <[email protected]>
---
drivers/net/wireless/ath/ath9k/ar9003_mci.c | 8 ++++++--
drivers/net/wireless/ath/ath9k/ar9003_mci.h | 4 ++++
2 files changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mci.c b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
index 1a48528..aca9015 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_mci.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
@@ -973,8 +973,12 @@ int ar9003_mci_reset(struct ath_hw *ah, bool en_int, bool is_2g,
(SM(0xe801, AR_MCI_MSG_ATTRIBUTES_TABLE_INVALID_HDR) |
SM(0x0000, AR_MCI_MSG_ATTRIBUTES_TABLE_CHECKSUM)));
- REG_CLR_BIT(ah, AR_MCI_TX_CTRL,
- AR_MCI_TX_CTRL_DISABLE_LNA_UPDATE);
+ if (MCI_ANT_ARCH_PA_LNA_SHARED(mci))
+ REG_CLR_BIT(ah, AR_MCI_TX_CTRL,
+ AR_MCI_TX_CTRL_DISABLE_LNA_UPDATE);
+ else
+ REG_SET_BIT(ah, AR_MCI_TX_CTRL,
+ AR_MCI_TX_CTRL_DISABLE_LNA_UPDATE);
ar9003_mci_observation_set_up(ah);
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mci.h b/drivers/net/wireless/ath/ath9k/ar9003_mci.h
index 6f305ab..174ebea 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_mci.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_mci.h
@@ -118,6 +118,10 @@ enum mci_gpm_coex_bt_update_flags_op {
#define ATH_MCI_ANT_ARCH_2_ANT_PA_LNA_SHARED 0x03
#define ATH_MCI_ANT_ARCH_3_ANT 0x04
+#define MCI_ANT_ARCH_PA_LNA_SHARED(mci) \
+ ((MS(mci->config, ATH_MCI_CONFIG_ANT_ARCH) == ATH_MCI_ANT_ARCH_1_ANT_PA_LNA_SHARED) || \
+ (MS(mci->config, ATH_MCI_CONFIG_ANT_ARCH) == ATH_MCI_ANT_ARCH_2_ANT_PA_LNA_SHARED))
+
enum mci_message_header { /* length of payload */
MCI_LNA_CTRL = 0x10, /* len = 0 */
MCI_CONT_NACK = 0x20, /* len = 0 */
--
2.3.0
From: Sujith Manoharan <[email protected]>
The value programmed in the BTCOEX control register
is different for each chip. This patch adds support
for 2-ANT, 1-ANT solutions based on AR9565.
Signed-off-by: Sujith Manoharan <[email protected]>
---
drivers/net/wireless/ath/ath9k/ar9003_mci.c | 78 +++++++++++++++++++++++------
drivers/net/wireless/ath/ath9k/ar9003_mci.h | 7 +++
2 files changed, 69 insertions(+), 16 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mci.c b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
index 4aed985..1a48528 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_mci.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
@@ -821,6 +821,61 @@ static void ar9003_mci_osla_setup(struct ath_hw *ah, bool enable)
AR_BTCOEX_CTRL_ONE_STEP_LOOK_AHEAD_EN, 1);
}
+static void ar9003_mci_set_btcoex_ctrl_9565_1ANT(struct ath_hw *ah)
+{
+ u32 regval;
+
+ regval = SM(1, AR_BTCOEX_CTRL_AR9462_MODE) |
+ SM(1, AR_BTCOEX_CTRL_WBTIMER_EN) |
+ SM(1, AR_BTCOEX_CTRL_PA_SHARED) |
+ SM(1, AR_BTCOEX_CTRL_LNA_SHARED) |
+ SM(1, AR_BTCOEX_CTRL_NUM_ANTENNAS) |
+ SM(1, AR_BTCOEX_CTRL_RX_CHAIN_MASK) |
+ SM(0, AR_BTCOEX_CTRL_1_CHAIN_ACK) |
+ SM(0, AR_BTCOEX_CTRL_1_CHAIN_BCN) |
+ SM(0, AR_BTCOEX_CTRL_ONE_STEP_LOOK_AHEAD_EN);
+
+ REG_RMW_FIELD(ah, AR_BTCOEX_CTRL2,
+ AR_BTCOEX_CTRL2_TX_CHAIN_MASK, 0x1);
+ REG_WRITE(ah, AR_BTCOEX_CTRL, regval);
+}
+
+static void ar9003_mci_set_btcoex_ctrl_9565_2ANT(struct ath_hw *ah)
+{
+ u32 regval;
+
+ regval = SM(1, AR_BTCOEX_CTRL_AR9462_MODE) |
+ SM(1, AR_BTCOEX_CTRL_WBTIMER_EN) |
+ SM(0, AR_BTCOEX_CTRL_PA_SHARED) |
+ SM(0, AR_BTCOEX_CTRL_LNA_SHARED) |
+ SM(2, AR_BTCOEX_CTRL_NUM_ANTENNAS) |
+ SM(1, AR_BTCOEX_CTRL_RX_CHAIN_MASK) |
+ SM(0, AR_BTCOEX_CTRL_1_CHAIN_ACK) |
+ SM(0, AR_BTCOEX_CTRL_1_CHAIN_BCN) |
+ SM(0, AR_BTCOEX_CTRL_ONE_STEP_LOOK_AHEAD_EN);
+
+ REG_RMW_FIELD(ah, AR_BTCOEX_CTRL2,
+ AR_BTCOEX_CTRL2_TX_CHAIN_MASK, 0x0);
+ REG_WRITE(ah, AR_BTCOEX_CTRL, regval);
+}
+
+static void ar9003_mci_set_btcoex_ctrl_9462(struct ath_hw *ah)
+{
+ u32 regval;
+
+ regval = SM(1, AR_BTCOEX_CTRL_AR9462_MODE) |
+ SM(1, AR_BTCOEX_CTRL_WBTIMER_EN) |
+ SM(1, AR_BTCOEX_CTRL_PA_SHARED) |
+ SM(1, AR_BTCOEX_CTRL_LNA_SHARED) |
+ SM(2, AR_BTCOEX_CTRL_NUM_ANTENNAS) |
+ SM(3, AR_BTCOEX_CTRL_RX_CHAIN_MASK) |
+ SM(0, AR_BTCOEX_CTRL_1_CHAIN_ACK) |
+ SM(0, AR_BTCOEX_CTRL_1_CHAIN_BCN) |
+ SM(0, AR_BTCOEX_CTRL_ONE_STEP_LOOK_AHEAD_EN);
+
+ REG_WRITE(ah, AR_BTCOEX_CTRL, regval);
+}
+
int ar9003_mci_reset(struct ath_hw *ah, bool en_int, bool is_2g,
bool is_full_sleep)
{
@@ -845,26 +900,17 @@ int ar9003_mci_reset(struct ath_hw *ah, bool en_int, bool is_2g,
* To avoid MCI state machine be affected by incoming remote MCI msgs,
* MCI mode will be enabled later, right before reset the MCI TX and RX.
*/
-
- regval = SM(1, AR_BTCOEX_CTRL_AR9462_MODE) |
- SM(1, AR_BTCOEX_CTRL_WBTIMER_EN) |
- SM(1, AR_BTCOEX_CTRL_PA_SHARED) |
- SM(1, AR_BTCOEX_CTRL_LNA_SHARED) |
- SM(0, AR_BTCOEX_CTRL_1_CHAIN_ACK) |
- SM(0, AR_BTCOEX_CTRL_1_CHAIN_BCN) |
- SM(0, AR_BTCOEX_CTRL_ONE_STEP_LOOK_AHEAD_EN);
if (AR_SREV_9565(ah)) {
- regval |= SM(1, AR_BTCOEX_CTRL_NUM_ANTENNAS) |
- SM(1, AR_BTCOEX_CTRL_RX_CHAIN_MASK);
- REG_RMW_FIELD(ah, AR_BTCOEX_CTRL2,
- AR_BTCOEX_CTRL2_TX_CHAIN_MASK, 0x1);
+ u8 ant = MS(mci->config, ATH_MCI_CONFIG_ANT_ARCH);
+
+ if (ant == ATH_MCI_ANT_ARCH_1_ANT_PA_LNA_SHARED)
+ ar9003_mci_set_btcoex_ctrl_9565_1ANT(ah);
+ else
+ ar9003_mci_set_btcoex_ctrl_9565_2ANT(ah);
} else {
- regval |= SM(2, AR_BTCOEX_CTRL_NUM_ANTENNAS) |
- SM(3, AR_BTCOEX_CTRL_RX_CHAIN_MASK);
+ ar9003_mci_set_btcoex_ctrl_9462(ah);
}
- REG_WRITE(ah, AR_BTCOEX_CTRL, regval);
-
if (is_2g && !(mci->config & ATH_MCI_CONFIG_DISABLE_OSLA))
ar9003_mci_osla_setup(ah, true);
else
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mci.h b/drivers/net/wireless/ath/ath9k/ar9003_mci.h
index e8b1914..6f305ab 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_mci.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_mci.h
@@ -109,8 +109,15 @@ enum mci_gpm_coex_bt_update_flags_op {
#define ATH_MCI_CONFIG_MCI_OBS_MASK (ATH_MCI_CONFIG_MCI_OBS_MCI | \
ATH_MCI_CONFIG_MCI_OBS_TXRX | \
ATH_MCI_CONFIG_MCI_OBS_BT)
+
#define ATH_MCI_CONFIG_MCI_OBS_GPIO 0x0000002F
+#define ATH_MCI_ANT_ARCH_1_ANT_PA_LNA_NON_SHARED 0x00
+#define ATH_MCI_ANT_ARCH_1_ANT_PA_LNA_SHARED 0x01
+#define ATH_MCI_ANT_ARCH_2_ANT_PA_LNA_NON_SHARED 0x02
+#define ATH_MCI_ANT_ARCH_2_ANT_PA_LNA_SHARED 0x03
+#define ATH_MCI_ANT_ARCH_3_ANT 0x04
+
enum mci_message_header { /* length of payload */
MCI_LNA_CTRL = 0x10, /* len = 0 */
MCI_CONT_NACK = 0x20, /* len = 0 */
--
2.3.0
From: Sujith Manoharan <[email protected]>
Signed-off-by: Sujith Manoharan <[email protected]>
---
drivers/net/wireless/ath/ath9k/hw.h | 1 +
drivers/net/wireless/ath/ath9k/reg.h | 275 ----------------------------
drivers/net/wireless/ath/ath9k/reg_mci.h | 300 +++++++++++++++++++++++++++++++
3 files changed, 301 insertions(+), 275 deletions(-)
create mode 100644 drivers/net/wireless/ath/ath9k/reg_mci.h
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index e82e570..29a25d9 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -27,6 +27,7 @@
#include "eeprom.h"
#include "calib.h"
#include "reg.h"
+#include "reg_mci.h"
#include "phy.h"
#include "btcoex.h"
#include "dynack.h"
diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h
index 9587ec6..1234399 100644
--- a/drivers/net/wireless/ath/ath9k/reg.h
+++ b/drivers/net/wireless/ath/ath9k/reg.h
@@ -2044,279 +2044,4 @@ enum {
#define AR_PHY_AGC_CONTROL_YCOK_MAX 0x000003c0
#define AR_PHY_AGC_CONTROL_YCOK_MAX_S 6
-/* MCI Registers */
-
-#define AR_MCI_COMMAND0 0x1800
-#define AR_MCI_COMMAND0_HEADER 0xFF
-#define AR_MCI_COMMAND0_HEADER_S 0
-#define AR_MCI_COMMAND0_LEN 0x1f00
-#define AR_MCI_COMMAND0_LEN_S 8
-#define AR_MCI_COMMAND0_DISABLE_TIMESTAMP 0x2000
-#define AR_MCI_COMMAND0_DISABLE_TIMESTAMP_S 13
-
-#define AR_MCI_COMMAND1 0x1804
-
-#define AR_MCI_COMMAND2 0x1808
-#define AR_MCI_COMMAND2_RESET_TX 0x01
-#define AR_MCI_COMMAND2_RESET_TX_S 0
-#define AR_MCI_COMMAND2_RESET_RX 0x02
-#define AR_MCI_COMMAND2_RESET_RX_S 1
-#define AR_MCI_COMMAND2_RESET_RX_NUM_CYCLES 0x3FC
-#define AR_MCI_COMMAND2_RESET_RX_NUM_CYCLES_S 2
-#define AR_MCI_COMMAND2_RESET_REQ_WAKEUP 0x400
-#define AR_MCI_COMMAND2_RESET_REQ_WAKEUP_S 10
-
-#define AR_MCI_RX_CTRL 0x180c
-
-#define AR_MCI_TX_CTRL 0x1810
-/* 0 = no division, 1 = divide by 2, 2 = divide by 4, 3 = divide by 8 */
-#define AR_MCI_TX_CTRL_CLK_DIV 0x03
-#define AR_MCI_TX_CTRL_CLK_DIV_S 0
-#define AR_MCI_TX_CTRL_DISABLE_LNA_UPDATE 0x04
-#define AR_MCI_TX_CTRL_DISABLE_LNA_UPDATE_S 2
-#define AR_MCI_TX_CTRL_GAIN_UPDATE_FREQ 0xFFFFF8
-#define AR_MCI_TX_CTRL_GAIN_UPDATE_FREQ_S 3
-#define AR_MCI_TX_CTRL_GAIN_UPDATE_NUM 0xF000000
-#define AR_MCI_TX_CTRL_GAIN_UPDATE_NUM_S 24
-
-#define AR_MCI_MSG_ATTRIBUTES_TABLE 0x1814
-#define AR_MCI_MSG_ATTRIBUTES_TABLE_CHECKSUM 0xFFFF
-#define AR_MCI_MSG_ATTRIBUTES_TABLE_CHECKSUM_S 0
-#define AR_MCI_MSG_ATTRIBUTES_TABLE_INVALID_HDR 0xFFFF0000
-#define AR_MCI_MSG_ATTRIBUTES_TABLE_INVALID_HDR_S 16
-
-#define AR_MCI_SCHD_TABLE_0 0x1818
-#define AR_MCI_SCHD_TABLE_1 0x181c
-#define AR_MCI_GPM_0 0x1820
-#define AR_MCI_GPM_1 0x1824
-#define AR_MCI_GPM_WRITE_PTR 0xFFFF0000
-#define AR_MCI_GPM_WRITE_PTR_S 16
-#define AR_MCI_GPM_BUF_LEN 0x0000FFFF
-#define AR_MCI_GPM_BUF_LEN_S 0
-
-#define AR_MCI_INTERRUPT_RAW 0x1828
-#define AR_MCI_INTERRUPT_EN 0x182c
-#define AR_MCI_INTERRUPT_SW_MSG_DONE 0x00000001
-#define AR_MCI_INTERRUPT_SW_MSG_DONE_S 0
-#define AR_MCI_INTERRUPT_CPU_INT_MSG 0x00000002
-#define AR_MCI_INTERRUPT_CPU_INT_MSG_S 1
-#define AR_MCI_INTERRUPT_RX_CKSUM_FAIL 0x00000004
-#define AR_MCI_INTERRUPT_RX_CKSUM_FAIL_S 2
-#define AR_MCI_INTERRUPT_RX_INVALID_HDR 0x00000008
-#define AR_MCI_INTERRUPT_RX_INVALID_HDR_S 3
-#define AR_MCI_INTERRUPT_RX_HW_MSG_FAIL 0x00000010
-#define AR_MCI_INTERRUPT_RX_HW_MSG_FAIL_S 4
-#define AR_MCI_INTERRUPT_RX_SW_MSG_FAIL 0x00000020
-#define AR_MCI_INTERRUPT_RX_SW_MSG_FAIL_S 5
-#define AR_MCI_INTERRUPT_TX_HW_MSG_FAIL 0x00000080
-#define AR_MCI_INTERRUPT_TX_HW_MSG_FAIL_S 7
-#define AR_MCI_INTERRUPT_TX_SW_MSG_FAIL 0x00000100
-#define AR_MCI_INTERRUPT_TX_SW_MSG_FAIL_S 8
-#define AR_MCI_INTERRUPT_RX_MSG 0x00000200
-#define AR_MCI_INTERRUPT_RX_MSG_S 9
-#define AR_MCI_INTERRUPT_REMOTE_SLEEP_UPDATE 0x00000400
-#define AR_MCI_INTERRUPT_REMOTE_SLEEP_UPDATE_S 10
-#define AR_MCI_INTERRUPT_BT_PRI 0x07fff800
-#define AR_MCI_INTERRUPT_BT_PRI_S 11
-#define AR_MCI_INTERRUPT_BT_PRI_THRESH 0x08000000
-#define AR_MCI_INTERRUPT_BT_PRI_THRESH_S 27
-#define AR_MCI_INTERRUPT_BT_FREQ 0x10000000
-#define AR_MCI_INTERRUPT_BT_FREQ_S 28
-#define AR_MCI_INTERRUPT_BT_STOMP 0x20000000
-#define AR_MCI_INTERRUPT_BT_STOMP_S 29
-#define AR_MCI_INTERRUPT_BB_AIC_IRQ 0x40000000
-#define AR_MCI_INTERRUPT_BB_AIC_IRQ_S 30
-#define AR_MCI_INTERRUPT_CONT_INFO_TIMEOUT 0x80000000
-#define AR_MCI_INTERRUPT_CONT_INFO_TIMEOUT_S 31
-
-#define AR_MCI_INTERRUPT_DEFAULT (AR_MCI_INTERRUPT_SW_MSG_DONE | \
- AR_MCI_INTERRUPT_RX_INVALID_HDR | \
- AR_MCI_INTERRUPT_RX_HW_MSG_FAIL | \
- AR_MCI_INTERRUPT_RX_SW_MSG_FAIL | \
- AR_MCI_INTERRUPT_TX_HW_MSG_FAIL | \
- AR_MCI_INTERRUPT_TX_SW_MSG_FAIL | \
- AR_MCI_INTERRUPT_RX_MSG | \
- AR_MCI_INTERRUPT_REMOTE_SLEEP_UPDATE | \
- AR_MCI_INTERRUPT_CONT_INFO_TIMEOUT)
-
-#define AR_MCI_INTERRUPT_MSG_FAIL_MASK (AR_MCI_INTERRUPT_RX_HW_MSG_FAIL | \
- AR_MCI_INTERRUPT_RX_SW_MSG_FAIL | \
- AR_MCI_INTERRUPT_TX_HW_MSG_FAIL | \
- AR_MCI_INTERRUPT_TX_SW_MSG_FAIL)
-
-#define AR_MCI_REMOTE_CPU_INT 0x1830
-#define AR_MCI_REMOTE_CPU_INT_EN 0x1834
-#define AR_MCI_INTERRUPT_RX_MSG_RAW 0x1838
-#define AR_MCI_INTERRUPT_RX_MSG_EN 0x183c
-#define AR_MCI_INTERRUPT_RX_MSG_REMOTE_RESET 0x00000001
-#define AR_MCI_INTERRUPT_RX_MSG_REMOTE_RESET_S 0
-#define AR_MCI_INTERRUPT_RX_MSG_LNA_CONTROL 0x00000002
-#define AR_MCI_INTERRUPT_RX_MSG_LNA_CONTROL_S 1
-#define AR_MCI_INTERRUPT_RX_MSG_CONT_NACK 0x00000004
-#define AR_MCI_INTERRUPT_RX_MSG_CONT_NACK_S 2
-#define AR_MCI_INTERRUPT_RX_MSG_CONT_INFO 0x00000008
-#define AR_MCI_INTERRUPT_RX_MSG_CONT_INFO_S 3
-#define AR_MCI_INTERRUPT_RX_MSG_CONT_RST 0x00000010
-#define AR_MCI_INTERRUPT_RX_MSG_CONT_RST_S 4
-#define AR_MCI_INTERRUPT_RX_MSG_SCHD_INFO 0x00000020
-#define AR_MCI_INTERRUPT_RX_MSG_SCHD_INFO_S 5
-#define AR_MCI_INTERRUPT_RX_MSG_CPU_INT 0x00000040
-#define AR_MCI_INTERRUPT_RX_MSG_CPU_INT_S 6
-#define AR_MCI_INTERRUPT_RX_MSG_GPM 0x00000100
-#define AR_MCI_INTERRUPT_RX_MSG_GPM_S 8
-#define AR_MCI_INTERRUPT_RX_MSG_LNA_INFO 0x00000200
-#define AR_MCI_INTERRUPT_RX_MSG_LNA_INFO_S 9
-#define AR_MCI_INTERRUPT_RX_MSG_SYS_SLEEPING 0x00000400
-#define AR_MCI_INTERRUPT_RX_MSG_SYS_SLEEPING_S 10
-#define AR_MCI_INTERRUPT_RX_MSG_SYS_WAKING 0x00000800
-#define AR_MCI_INTERRUPT_RX_MSG_SYS_WAKING_S 11
-#define AR_MCI_INTERRUPT_RX_MSG_REQ_WAKE 0x00001000
-#define AR_MCI_INTERRUPT_RX_MSG_REQ_WAKE_S 12
-#define AR_MCI_INTERRUPT_RX_HW_MSG_MASK (AR_MCI_INTERRUPT_RX_MSG_SCHD_INFO | \
- AR_MCI_INTERRUPT_RX_MSG_LNA_CONTROL| \
- AR_MCI_INTERRUPT_RX_MSG_LNA_INFO | \
- AR_MCI_INTERRUPT_RX_MSG_CONT_NACK | \
- AR_MCI_INTERRUPT_RX_MSG_CONT_INFO | \
- AR_MCI_INTERRUPT_RX_MSG_CONT_RST)
-
-#define AR_MCI_INTERRUPT_RX_MSG_DEFAULT (AR_MCI_INTERRUPT_RX_MSG_GPM | \
- AR_MCI_INTERRUPT_RX_MSG_REMOTE_RESET| \
- AR_MCI_INTERRUPT_RX_MSG_SYS_WAKING | \
- AR_MCI_INTERRUPT_RX_MSG_SYS_SLEEPING| \
- AR_MCI_INTERRUPT_RX_MSG_REQ_WAKE)
-
-#define AR_MCI_CPU_INT 0x1840
-
-#define AR_MCI_RX_STATUS 0x1844
-#define AR_MCI_RX_LAST_SCHD_MSG_INDEX 0x00000F00
-#define AR_MCI_RX_LAST_SCHD_MSG_INDEX_S 8
-#define AR_MCI_RX_REMOTE_SLEEP 0x00001000
-#define AR_MCI_RX_REMOTE_SLEEP_S 12
-#define AR_MCI_RX_MCI_CLK_REQ 0x00002000
-#define AR_MCI_RX_MCI_CLK_REQ_S 13
-
-#define AR_MCI_CONT_STATUS 0x1848
-#define AR_MCI_CONT_RSSI_POWER 0x000000FF
-#define AR_MCI_CONT_RSSI_POWER_S 0
-#define AR_MCI_CONT_PRIORITY 0x0000FF00
-#define AR_MCI_CONT_PRIORITY_S 8
-#define AR_MCI_CONT_TXRX 0x00010000
-#define AR_MCI_CONT_TXRX_S 16
-
-#define AR_MCI_BT_PRI0 0x184c
-#define AR_MCI_BT_PRI1 0x1850
-#define AR_MCI_BT_PRI2 0x1854
-#define AR_MCI_BT_PRI3 0x1858
-#define AR_MCI_BT_PRI 0x185c
-#define AR_MCI_WL_FREQ0 0x1860
-#define AR_MCI_WL_FREQ1 0x1864
-#define AR_MCI_WL_FREQ2 0x1868
-#define AR_MCI_GAIN 0x186c
-#define AR_MCI_WBTIMER1 0x1870
-#define AR_MCI_WBTIMER2 0x1874
-#define AR_MCI_WBTIMER3 0x1878
-#define AR_MCI_WBTIMER4 0x187c
-#define AR_MCI_MAXGAIN 0x1880
-#define AR_MCI_HW_SCHD_TBL_CTL 0x1884
-#define AR_MCI_HW_SCHD_TBL_D0 0x1888
-#define AR_MCI_HW_SCHD_TBL_D1 0x188c
-#define AR_MCI_HW_SCHD_TBL_D2 0x1890
-#define AR_MCI_HW_SCHD_TBL_D3 0x1894
-#define AR_MCI_TX_PAYLOAD0 0x1898
-#define AR_MCI_TX_PAYLOAD1 0x189c
-#define AR_MCI_TX_PAYLOAD2 0x18a0
-#define AR_MCI_TX_PAYLOAD3 0x18a4
-#define AR_BTCOEX_WBTIMER 0x18a8
-
-#define AR_BTCOEX_CTRL 0x18ac
-#define AR_BTCOEX_CTRL_AR9462_MODE 0x00000001
-#define AR_BTCOEX_CTRL_AR9462_MODE_S 0
-#define AR_BTCOEX_CTRL_WBTIMER_EN 0x00000002
-#define AR_BTCOEX_CTRL_WBTIMER_EN_S 1
-#define AR_BTCOEX_CTRL_MCI_MODE_EN 0x00000004
-#define AR_BTCOEX_CTRL_MCI_MODE_EN_S 2
-#define AR_BTCOEX_CTRL_LNA_SHARED 0x00000008
-#define AR_BTCOEX_CTRL_LNA_SHARED_S 3
-#define AR_BTCOEX_CTRL_PA_SHARED 0x00000010
-#define AR_BTCOEX_CTRL_PA_SHARED_S 4
-#define AR_BTCOEX_CTRL_ONE_STEP_LOOK_AHEAD_EN 0x00000020
-#define AR_BTCOEX_CTRL_ONE_STEP_LOOK_AHEAD_EN_S 5
-#define AR_BTCOEX_CTRL_TIME_TO_NEXT_BT_THRESH_EN 0x00000040
-#define AR_BTCOEX_CTRL_TIME_TO_NEXT_BT_THRESH_EN_S 6
-#define AR_BTCOEX_CTRL_NUM_ANTENNAS 0x00000180
-#define AR_BTCOEX_CTRL_NUM_ANTENNAS_S 7
-#define AR_BTCOEX_CTRL_RX_CHAIN_MASK 0x00000E00
-#define AR_BTCOEX_CTRL_RX_CHAIN_MASK_S 9
-#define AR_BTCOEX_CTRL_AGGR_THRESH 0x00007000
-#define AR_BTCOEX_CTRL_AGGR_THRESH_S 12
-#define AR_BTCOEX_CTRL_1_CHAIN_BCN 0x00080000
-#define AR_BTCOEX_CTRL_1_CHAIN_BCN_S 19
-#define AR_BTCOEX_CTRL_1_CHAIN_ACK 0x00100000
-#define AR_BTCOEX_CTRL_1_CHAIN_ACK_S 20
-#define AR_BTCOEX_CTRL_WAIT_BA_MARGIN 0x1FE00000
-#define AR_BTCOEX_CTRL_WAIT_BA_MARGIN_S 28
-#define AR_BTCOEX_CTRL_REDUCE_TXPWR 0x20000000
-#define AR_BTCOEX_CTRL_REDUCE_TXPWR_S 29
-#define AR_BTCOEX_CTRL_SPDT_ENABLE_10 0x40000000
-#define AR_BTCOEX_CTRL_SPDT_ENABLE_10_S 30
-#define AR_BTCOEX_CTRL_SPDT_POLARITY 0x80000000
-#define AR_BTCOEX_CTRL_SPDT_POLARITY_S 31
-
-#define AR_BTCOEX_MAX_TXPWR(_x) (0x18c0 + ((_x) << 2))
-#define AR_BTCOEX_WL_LNA 0x1940
-#define AR_BTCOEX_RFGAIN_CTRL 0x1944
-#define AR_BTCOEX_WL_LNA_TIMEOUT 0x003FFFFF
-#define AR_BTCOEX_WL_LNA_TIMEOUT_S 0
-
-#define AR_BTCOEX_CTRL2 0x1948
-#define AR_BTCOEX_CTRL2_TXPWR_THRESH 0x0007F800
-#define AR_BTCOEX_CTRL2_TXPWR_THRESH_S 11
-#define AR_BTCOEX_CTRL2_TX_CHAIN_MASK 0x00380000
-#define AR_BTCOEX_CTRL2_TX_CHAIN_MASK_S 19
-#define AR_BTCOEX_CTRL2_RX_DEWEIGHT 0x00400000
-#define AR_BTCOEX_CTRL2_RX_DEWEIGHT_S 22
-#define AR_BTCOEX_CTRL2_GPIO_OBS_SEL 0x00800000
-#define AR_BTCOEX_CTRL2_GPIO_OBS_SEL_S 23
-#define AR_BTCOEX_CTRL2_MAC_BB_OBS_SEL 0x01000000
-#define AR_BTCOEX_CTRL2_MAC_BB_OBS_SEL_S 24
-#define AR_BTCOEX_CTRL2_DESC_BASED_TXPWR_ENABLE 0x02000000
-#define AR_BTCOEX_CTRL2_DESC_BASED_TXPWR_ENABLE_S 25
-
-#define AR_BTCOEX_CTRL_SPDT_ENABLE 0x00000001
-#define AR_BTCOEX_CTRL_SPDT_ENABLE_S 0
-#define AR_BTCOEX_CTRL_BT_OWN_SPDT_CTRL 0x00000002
-#define AR_BTCOEX_CTRL_BT_OWN_SPDT_CTRL_S 1
-#define AR_BTCOEX_CTRL_USE_LATCHED_BT_ANT 0x00000004
-#define AR_BTCOEX_CTRL_USE_LATCHED_BT_ANT_S 2
-#define AR_GLB_WLAN_UART_INTF_EN 0x00020000
-#define AR_GLB_WLAN_UART_INTF_EN_S 17
-#define AR_GLB_DS_JTAG_DISABLE 0x00040000
-#define AR_GLB_DS_JTAG_DISABLE_S 18
-
-#define AR_BTCOEX_RC 0x194c
-#define AR_BTCOEX_MAX_RFGAIN(_x) (0x1950 + ((_x) << 2))
-#define AR_BTCOEX_DBG 0x1a50
-#define AR_MCI_LAST_HW_MSG_HDR 0x1a54
-#define AR_MCI_LAST_HW_MSG_BDY 0x1a58
-
-#define AR_MCI_SCHD_TABLE_2 0x1a5c
-#define AR_MCI_SCHD_TABLE_2_MEM_BASED 0x00000001
-#define AR_MCI_SCHD_TABLE_2_MEM_BASED_S 0
-#define AR_MCI_SCHD_TABLE_2_HW_BASED 0x00000002
-#define AR_MCI_SCHD_TABLE_2_HW_BASED_S 1
-
-#define AR_BTCOEX_CTRL3 0x1a60
-#define AR_BTCOEX_CTRL3_CONT_INFO_TIMEOUT 0x00000fff
-#define AR_BTCOEX_CTRL3_CONT_INFO_TIMEOUT_S 0
-
-#define AR_GLB_SWREG_DISCONT_MODE 0x2002c
-#define AR_GLB_SWREG_DISCONT_EN_BT_WLAN 0x3
-
-#define AR_MCI_MISC 0x1a74
-#define AR_MCI_MISC_HW_FIX_EN 0x00000001
-#define AR_MCI_MISC_HW_FIX_EN_S 0
-#define AR_MCI_DBG_CNT_CTRL 0x1a78
-#define AR_MCI_DBG_CNT_CTRL_ENABLE 0x00000001
-#define AR_MCI_DBG_CNT_CTRL_ENABLE_S 0
-
#endif
diff --git a/drivers/net/wireless/ath/ath9k/reg_mci.h b/drivers/net/wireless/ath/ath9k/reg_mci.h
new file mode 100644
index 0000000..8d1572d
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/reg_mci.h
@@ -0,0 +1,300 @@
+/*
+ * Copyright (c) 2015 Qualcomm Atheros Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef REG_MCI_H
+#define REG_MCI_H
+
+#define AR_MCI_COMMAND0 0x1800
+#define AR_MCI_COMMAND0_HEADER 0xFF
+#define AR_MCI_COMMAND0_HEADER_S 0
+#define AR_MCI_COMMAND0_LEN 0x1f00
+#define AR_MCI_COMMAND0_LEN_S 8
+#define AR_MCI_COMMAND0_DISABLE_TIMESTAMP 0x2000
+#define AR_MCI_COMMAND0_DISABLE_TIMESTAMP_S 13
+
+#define AR_MCI_COMMAND1 0x1804
+
+#define AR_MCI_COMMAND2 0x1808
+#define AR_MCI_COMMAND2_RESET_TX 0x01
+#define AR_MCI_COMMAND2_RESET_TX_S 0
+#define AR_MCI_COMMAND2_RESET_RX 0x02
+#define AR_MCI_COMMAND2_RESET_RX_S 1
+#define AR_MCI_COMMAND2_RESET_RX_NUM_CYCLES 0x3FC
+#define AR_MCI_COMMAND2_RESET_RX_NUM_CYCLES_S 2
+#define AR_MCI_COMMAND2_RESET_REQ_WAKEUP 0x400
+#define AR_MCI_COMMAND2_RESET_REQ_WAKEUP_S 10
+
+#define AR_MCI_RX_CTRL 0x180c
+
+#define AR_MCI_TX_CTRL 0x1810
+/*
+ * 0 = no division,
+ * 1 = divide by 2,
+ * 2 = divide by 4,
+ * 3 = divide by 8
+ */
+#define AR_MCI_TX_CTRL_CLK_DIV 0x03
+#define AR_MCI_TX_CTRL_CLK_DIV_S 0
+#define AR_MCI_TX_CTRL_DISABLE_LNA_UPDATE 0x04
+#define AR_MCI_TX_CTRL_DISABLE_LNA_UPDATE_S 2
+#define AR_MCI_TX_CTRL_GAIN_UPDATE_FREQ 0xFFFFF8
+#define AR_MCI_TX_CTRL_GAIN_UPDATE_FREQ_S 3
+#define AR_MCI_TX_CTRL_GAIN_UPDATE_NUM 0xF000000
+#define AR_MCI_TX_CTRL_GAIN_UPDATE_NUM_S 24
+
+#define AR_MCI_MSG_ATTRIBUTES_TABLE 0x1814
+#define AR_MCI_MSG_ATTRIBUTES_TABLE_CHECKSUM 0xFFFF
+#define AR_MCI_MSG_ATTRIBUTES_TABLE_CHECKSUM_S 0
+#define AR_MCI_MSG_ATTRIBUTES_TABLE_INVALID_HDR 0xFFFF0000
+#define AR_MCI_MSG_ATTRIBUTES_TABLE_INVALID_HDR_S 16
+
+#define AR_MCI_SCHD_TABLE_0 0x1818
+#define AR_MCI_SCHD_TABLE_1 0x181c
+#define AR_MCI_GPM_0 0x1820
+#define AR_MCI_GPM_1 0x1824
+#define AR_MCI_GPM_WRITE_PTR 0xFFFF0000
+#define AR_MCI_GPM_WRITE_PTR_S 16
+#define AR_MCI_GPM_BUF_LEN 0x0000FFFF
+#define AR_MCI_GPM_BUF_LEN_S 0
+
+#define AR_MCI_INTERRUPT_RAW 0x1828
+
+#define AR_MCI_INTERRUPT_EN 0x182c
+#define AR_MCI_INTERRUPT_SW_MSG_DONE 0x00000001
+#define AR_MCI_INTERRUPT_SW_MSG_DONE_S 0
+#define AR_MCI_INTERRUPT_CPU_INT_MSG 0x00000002
+#define AR_MCI_INTERRUPT_CPU_INT_MSG_S 1
+#define AR_MCI_INTERRUPT_RX_CKSUM_FAIL 0x00000004
+#define AR_MCI_INTERRUPT_RX_CKSUM_FAIL_S 2
+#define AR_MCI_INTERRUPT_RX_INVALID_HDR 0x00000008
+#define AR_MCI_INTERRUPT_RX_INVALID_HDR_S 3
+#define AR_MCI_INTERRUPT_RX_HW_MSG_FAIL 0x00000010
+#define AR_MCI_INTERRUPT_RX_HW_MSG_FAIL_S 4
+#define AR_MCI_INTERRUPT_RX_SW_MSG_FAIL 0x00000020
+#define AR_MCI_INTERRUPT_RX_SW_MSG_FAIL_S 5
+#define AR_MCI_INTERRUPT_TX_HW_MSG_FAIL 0x00000080
+#define AR_MCI_INTERRUPT_TX_HW_MSG_FAIL_S 7
+#define AR_MCI_INTERRUPT_TX_SW_MSG_FAIL 0x00000100
+#define AR_MCI_INTERRUPT_TX_SW_MSG_FAIL_S 8
+#define AR_MCI_INTERRUPT_RX_MSG 0x00000200
+#define AR_MCI_INTERRUPT_RX_MSG_S 9
+#define AR_MCI_INTERRUPT_REMOTE_SLEEP_UPDATE 0x00000400
+#define AR_MCI_INTERRUPT_REMOTE_SLEEP_UPDATE_S 10
+#define AR_MCI_INTERRUPT_BT_PRI 0x07fff800
+#define AR_MCI_INTERRUPT_BT_PRI_S 11
+#define AR_MCI_INTERRUPT_BT_PRI_THRESH 0x08000000
+#define AR_MCI_INTERRUPT_BT_PRI_THRESH_S 27
+#define AR_MCI_INTERRUPT_BT_FREQ 0x10000000
+#define AR_MCI_INTERRUPT_BT_FREQ_S 28
+#define AR_MCI_INTERRUPT_BT_STOMP 0x20000000
+#define AR_MCI_INTERRUPT_BT_STOMP_S 29
+#define AR_MCI_INTERRUPT_BB_AIC_IRQ 0x40000000
+#define AR_MCI_INTERRUPT_BB_AIC_IRQ_S 30
+#define AR_MCI_INTERRUPT_CONT_INFO_TIMEOUT 0x80000000
+#define AR_MCI_INTERRUPT_CONT_INFO_TIMEOUT_S 31
+
+#define AR_MCI_REMOTE_CPU_INT 0x1830
+#define AR_MCI_REMOTE_CPU_INT_EN 0x1834
+#define AR_MCI_INTERRUPT_RX_MSG_RAW 0x1838
+#define AR_MCI_INTERRUPT_RX_MSG_EN 0x183c
+#define AR_MCI_INTERRUPT_RX_MSG_REMOTE_RESET 0x00000001
+#define AR_MCI_INTERRUPT_RX_MSG_REMOTE_RESET_S 0
+#define AR_MCI_INTERRUPT_RX_MSG_LNA_CONTROL 0x00000002
+#define AR_MCI_INTERRUPT_RX_MSG_LNA_CONTROL_S 1
+#define AR_MCI_INTERRUPT_RX_MSG_CONT_NACK 0x00000004
+#define AR_MCI_INTERRUPT_RX_MSG_CONT_NACK_S 2
+#define AR_MCI_INTERRUPT_RX_MSG_CONT_INFO 0x00000008
+#define AR_MCI_INTERRUPT_RX_MSG_CONT_INFO_S 3
+#define AR_MCI_INTERRUPT_RX_MSG_CONT_RST 0x00000010
+#define AR_MCI_INTERRUPT_RX_MSG_CONT_RST_S 4
+#define AR_MCI_INTERRUPT_RX_MSG_SCHD_INFO 0x00000020
+#define AR_MCI_INTERRUPT_RX_MSG_SCHD_INFO_S 5
+#define AR_MCI_INTERRUPT_RX_MSG_CPU_INT 0x00000040
+#define AR_MCI_INTERRUPT_RX_MSG_CPU_INT_S 6
+#define AR_MCI_INTERRUPT_RX_MSG_GPM 0x00000100
+#define AR_MCI_INTERRUPT_RX_MSG_GPM_S 8
+#define AR_MCI_INTERRUPT_RX_MSG_LNA_INFO 0x00000200
+#define AR_MCI_INTERRUPT_RX_MSG_LNA_INFO_S 9
+#define AR_MCI_INTERRUPT_RX_MSG_SYS_SLEEPING 0x00000400
+#define AR_MCI_INTERRUPT_RX_MSG_SYS_SLEEPING_S 10
+#define AR_MCI_INTERRUPT_RX_MSG_SYS_WAKING 0x00000800
+#define AR_MCI_INTERRUPT_RX_MSG_SYS_WAKING_S 11
+#define AR_MCI_INTERRUPT_RX_MSG_REQ_WAKE 0x00001000
+#define AR_MCI_INTERRUPT_RX_MSG_REQ_WAKE_S 12
+
+#define AR_MCI_CPU_INT 0x1840
+
+#define AR_MCI_RX_STATUS 0x1844
+#define AR_MCI_RX_LAST_SCHD_MSG_INDEX 0x00000F00
+#define AR_MCI_RX_LAST_SCHD_MSG_INDEX_S 8
+#define AR_MCI_RX_REMOTE_SLEEP 0x00001000
+#define AR_MCI_RX_REMOTE_SLEEP_S 12
+#define AR_MCI_RX_MCI_CLK_REQ 0x00002000
+#define AR_MCI_RX_MCI_CLK_REQ_S 13
+
+#define AR_MCI_CONT_STATUS 0x1848
+#define AR_MCI_CONT_RSSI_POWER 0x000000FF
+#define AR_MCI_CONT_RSSI_POWER_S 0
+#define AR_MCI_CONT_PRIORITY 0x0000FF00
+#define AR_MCI_CONT_PRIORITY_S 8
+#define AR_MCI_CONT_TXRX 0x00010000
+#define AR_MCI_CONT_TXRX_S 16
+
+#define AR_MCI_BT_PRI0 0x184c
+#define AR_MCI_BT_PRI1 0x1850
+#define AR_MCI_BT_PRI2 0x1854
+#define AR_MCI_BT_PRI3 0x1858
+#define AR_MCI_BT_PRI 0x185c
+#define AR_MCI_WL_FREQ0 0x1860
+#define AR_MCI_WL_FREQ1 0x1864
+#define AR_MCI_WL_FREQ2 0x1868
+#define AR_MCI_GAIN 0x186c
+#define AR_MCI_WBTIMER1 0x1870
+#define AR_MCI_WBTIMER2 0x1874
+#define AR_MCI_WBTIMER3 0x1878
+#define AR_MCI_WBTIMER4 0x187c
+#define AR_MCI_MAXGAIN 0x1880
+#define AR_MCI_HW_SCHD_TBL_CTL 0x1884
+#define AR_MCI_HW_SCHD_TBL_D0 0x1888
+#define AR_MCI_HW_SCHD_TBL_D1 0x188c
+#define AR_MCI_HW_SCHD_TBL_D2 0x1890
+#define AR_MCI_HW_SCHD_TBL_D3 0x1894
+#define AR_MCI_TX_PAYLOAD0 0x1898
+#define AR_MCI_TX_PAYLOAD1 0x189c
+#define AR_MCI_TX_PAYLOAD2 0x18a0
+#define AR_MCI_TX_PAYLOAD3 0x18a4
+#define AR_BTCOEX_WBTIMER 0x18a8
+
+#define AR_BTCOEX_CTRL 0x18ac
+#define AR_BTCOEX_CTRL_AR9462_MODE 0x00000001
+#define AR_BTCOEX_CTRL_AR9462_MODE_S 0
+#define AR_BTCOEX_CTRL_WBTIMER_EN 0x00000002
+#define AR_BTCOEX_CTRL_WBTIMER_EN_S 1
+#define AR_BTCOEX_CTRL_MCI_MODE_EN 0x00000004
+#define AR_BTCOEX_CTRL_MCI_MODE_EN_S 2
+#define AR_BTCOEX_CTRL_LNA_SHARED 0x00000008
+#define AR_BTCOEX_CTRL_LNA_SHARED_S 3
+#define AR_BTCOEX_CTRL_PA_SHARED 0x00000010
+#define AR_BTCOEX_CTRL_PA_SHARED_S 4
+#define AR_BTCOEX_CTRL_ONE_STEP_LOOK_AHEAD_EN 0x00000020
+#define AR_BTCOEX_CTRL_ONE_STEP_LOOK_AHEAD_EN_S 5
+#define AR_BTCOEX_CTRL_TIME_TO_NEXT_BT_THRESH_EN 0x00000040
+#define AR_BTCOEX_CTRL_TIME_TO_NEXT_BT_THRESH_EN_S 6
+#define AR_BTCOEX_CTRL_NUM_ANTENNAS 0x00000180
+#define AR_BTCOEX_CTRL_NUM_ANTENNAS_S 7
+#define AR_BTCOEX_CTRL_RX_CHAIN_MASK 0x00000E00
+#define AR_BTCOEX_CTRL_RX_CHAIN_MASK_S 9
+#define AR_BTCOEX_CTRL_AGGR_THRESH 0x00007000
+#define AR_BTCOEX_CTRL_AGGR_THRESH_S 12
+#define AR_BTCOEX_CTRL_1_CHAIN_BCN 0x00080000
+#define AR_BTCOEX_CTRL_1_CHAIN_BCN_S 19
+#define AR_BTCOEX_CTRL_1_CHAIN_ACK 0x00100000
+#define AR_BTCOEX_CTRL_1_CHAIN_ACK_S 20
+#define AR_BTCOEX_CTRL_WAIT_BA_MARGIN 0x1FE00000
+#define AR_BTCOEX_CTRL_WAIT_BA_MARGIN_S 28
+#define AR_BTCOEX_CTRL_REDUCE_TXPWR 0x20000000
+#define AR_BTCOEX_CTRL_REDUCE_TXPWR_S 29
+#define AR_BTCOEX_CTRL_SPDT_ENABLE_10 0x40000000
+#define AR_BTCOEX_CTRL_SPDT_ENABLE_10_S 30
+#define AR_BTCOEX_CTRL_SPDT_POLARITY 0x80000000
+#define AR_BTCOEX_CTRL_SPDT_POLARITY_S 31
+
+#define AR_BTCOEX_MAX_TXPWR(_x) (0x18c0 + ((_x) << 2))
+#define AR_BTCOEX_WL_LNA 0x1940
+#define AR_BTCOEX_RFGAIN_CTRL 0x1944
+#define AR_BTCOEX_WL_LNA_TIMEOUT 0x003FFFFF
+#define AR_BTCOEX_WL_LNA_TIMEOUT_S 0
+
+#define AR_BTCOEX_CTRL2 0x1948
+#define AR_BTCOEX_CTRL2_TXPWR_THRESH 0x0007F800
+#define AR_BTCOEX_CTRL2_TXPWR_THRESH_S 11
+#define AR_BTCOEX_CTRL2_TX_CHAIN_MASK 0x00380000
+#define AR_BTCOEX_CTRL2_TX_CHAIN_MASK_S 19
+#define AR_BTCOEX_CTRL2_RX_DEWEIGHT 0x00400000
+#define AR_BTCOEX_CTRL2_RX_DEWEIGHT_S 22
+#define AR_BTCOEX_CTRL2_GPIO_OBS_SEL 0x00800000
+#define AR_BTCOEX_CTRL2_GPIO_OBS_SEL_S 23
+#define AR_BTCOEX_CTRL2_MAC_BB_OBS_SEL 0x01000000
+#define AR_BTCOEX_CTRL2_MAC_BB_OBS_SEL_S 24
+#define AR_BTCOEX_CTRL2_DESC_BASED_TXPWR_ENABLE 0x02000000
+#define AR_BTCOEX_CTRL2_DESC_BASED_TXPWR_ENABLE_S 25
+
+#define AR_BTCOEX_CTRL_SPDT_ENABLE 0x00000001
+#define AR_BTCOEX_CTRL_SPDT_ENABLE_S 0
+#define AR_BTCOEX_CTRL_BT_OWN_SPDT_CTRL 0x00000002
+#define AR_BTCOEX_CTRL_BT_OWN_SPDT_CTRL_S 1
+#define AR_BTCOEX_CTRL_USE_LATCHED_BT_ANT 0x00000004
+#define AR_BTCOEX_CTRL_USE_LATCHED_BT_ANT_S 2
+#define AR_GLB_WLAN_UART_INTF_EN 0x00020000
+#define AR_GLB_WLAN_UART_INTF_EN_S 17
+#define AR_GLB_DS_JTAG_DISABLE 0x00040000
+#define AR_GLB_DS_JTAG_DISABLE_S 18
+
+#define AR_BTCOEX_RC 0x194c
+#define AR_BTCOEX_MAX_RFGAIN(_x) (0x1950 + ((_x) << 2))
+#define AR_BTCOEX_DBG 0x1a50
+#define AR_MCI_LAST_HW_MSG_HDR 0x1a54
+#define AR_MCI_LAST_HW_MSG_BDY 0x1a58
+
+#define AR_MCI_SCHD_TABLE_2 0x1a5c
+#define AR_MCI_SCHD_TABLE_2_MEM_BASED 0x00000001
+#define AR_MCI_SCHD_TABLE_2_MEM_BASED_S 0
+#define AR_MCI_SCHD_TABLE_2_HW_BASED 0x00000002
+#define AR_MCI_SCHD_TABLE_2_HW_BASED_S 1
+
+#define AR_BTCOEX_CTRL3 0x1a60
+#define AR_BTCOEX_CTRL3_CONT_INFO_TIMEOUT 0x00000fff
+#define AR_BTCOEX_CTRL3_CONT_INFO_TIMEOUT_S 0
+
+#define AR_GLB_SWREG_DISCONT_MODE 0x2002c
+#define AR_GLB_SWREG_DISCONT_EN_BT_WLAN 0x3
+
+#define AR_MCI_MISC 0x1a74
+#define AR_MCI_MISC_HW_FIX_EN 0x00000001
+#define AR_MCI_MISC_HW_FIX_EN_S 0
+#define AR_MCI_DBG_CNT_CTRL 0x1a78
+#define AR_MCI_DBG_CNT_CTRL_ENABLE 0x00000001
+#define AR_MCI_DBG_CNT_CTRL_ENABLE_S 0
+
+#define AR_MCI_INTERRUPT_DEFAULT (AR_MCI_INTERRUPT_SW_MSG_DONE | \
+ AR_MCI_INTERRUPT_RX_INVALID_HDR | \
+ AR_MCI_INTERRUPT_RX_HW_MSG_FAIL | \
+ AR_MCI_INTERRUPT_RX_SW_MSG_FAIL | \
+ AR_MCI_INTERRUPT_TX_HW_MSG_FAIL | \
+ AR_MCI_INTERRUPT_TX_SW_MSG_FAIL | \
+ AR_MCI_INTERRUPT_RX_MSG | \
+ AR_MCI_INTERRUPT_REMOTE_SLEEP_UPDATE | \
+ AR_MCI_INTERRUPT_CONT_INFO_TIMEOUT)
+
+#define AR_MCI_INTERRUPT_MSG_FAIL_MASK (AR_MCI_INTERRUPT_RX_HW_MSG_FAIL | \
+ AR_MCI_INTERRUPT_RX_SW_MSG_FAIL | \
+ AR_MCI_INTERRUPT_TX_HW_MSG_FAIL | \
+ AR_MCI_INTERRUPT_TX_SW_MSG_FAIL)
+
+#define AR_MCI_INTERRUPT_RX_HW_MSG_MASK (AR_MCI_INTERRUPT_RX_MSG_SCHD_INFO | \
+ AR_MCI_INTERRUPT_RX_MSG_LNA_CONTROL | \
+ AR_MCI_INTERRUPT_RX_MSG_LNA_INFO | \
+ AR_MCI_INTERRUPT_RX_MSG_CONT_NACK | \
+ AR_MCI_INTERRUPT_RX_MSG_CONT_INFO | \
+ AR_MCI_INTERRUPT_RX_MSG_CONT_RST)
+
+#define AR_MCI_INTERRUPT_RX_MSG_DEFAULT (AR_MCI_INTERRUPT_RX_MSG_GPM | \
+ AR_MCI_INTERRUPT_RX_MSG_REMOTE_RESET | \
+ AR_MCI_INTERRUPT_RX_MSG_SYS_WAKING | \
+ AR_MCI_INTERRUPT_RX_MSG_SYS_SLEEPING | \
+ AR_MCI_INTERRUPT_RX_MSG_REQ_WAKE)
+
+#endif /* REG_MCI_H */
--
2.3.0
From: Sujith Manoharan <[email protected]>
Use a subroutine to enable MCI debug statistics
if it is present in the global configuration.
Signed-off-by: Sujith Manoharan <[email protected]>
---
drivers/net/wireless/ath/ath9k/ar9003_mci.c | 23 ++++++++++++++++++++---
drivers/net/wireless/ath/ath9k/reg_mci.h | 5 +++++
2 files changed, 25 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mci.c b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
index aca9015..de65ce1 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_mci.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
@@ -821,6 +821,25 @@ static void ar9003_mci_osla_setup(struct ath_hw *ah, bool enable)
AR_BTCOEX_CTRL_ONE_STEP_LOOK_AHEAD_EN, 1);
}
+static void ar9003_mci_stat_setup(struct ath_hw *ah)
+{
+ struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
+
+ if (!AR_SREV_9565(ah))
+ return;
+
+ if (mci->config & ATH_MCI_CONFIG_MCI_STAT_DBG) {
+ REG_RMW_FIELD(ah, AR_MCI_DBG_CNT_CTRL,
+ AR_MCI_DBG_CNT_CTRL_ENABLE, 1);
+ REG_RMW_FIELD(ah, AR_MCI_DBG_CNT_CTRL,
+ AR_MCI_DBG_CNT_CTRL_BT_LINKID,
+ MCI_STAT_ALL_BT_LINKID);
+ } else {
+ REG_RMW_FIELD(ah, AR_MCI_DBG_CNT_CTRL,
+ AR_MCI_DBG_CNT_CTRL_ENABLE, 0);
+ }
+}
+
static void ar9003_mci_set_btcoex_ctrl_9565_1ANT(struct ath_hw *ah)
{
u32 regval;
@@ -984,10 +1003,8 @@ int ar9003_mci_reset(struct ath_hw *ah, bool en_int, bool is_2g,
mci->ready = true;
ar9003_mci_prep_interface(ah);
+ ar9003_mci_stat_setup(ah);
- if (AR_SREV_9565(ah))
- REG_RMW_FIELD(ah, AR_MCI_DBG_CNT_CTRL,
- AR_MCI_DBG_CNT_CTRL_ENABLE, 0);
if (en_int)
ar9003_mci_enable_interrupt(ah);
diff --git a/drivers/net/wireless/ath/ath9k/reg_mci.h b/drivers/net/wireless/ath/ath9k/reg_mci.h
index 8d1572d..3bd7c21 100644
--- a/drivers/net/wireless/ath/ath9k/reg_mci.h
+++ b/drivers/net/wireless/ath/ath9k/reg_mci.h
@@ -265,9 +265,14 @@
#define AR_MCI_MISC 0x1a74
#define AR_MCI_MISC_HW_FIX_EN 0x00000001
#define AR_MCI_MISC_HW_FIX_EN_S 0
+
#define AR_MCI_DBG_CNT_CTRL 0x1a78
#define AR_MCI_DBG_CNT_CTRL_ENABLE 0x00000001
#define AR_MCI_DBG_CNT_CTRL_ENABLE_S 0
+#define AR_MCI_DBG_CNT_CTRL_BT_LINKID 0x000007f8
+#define AR_MCI_DBG_CNT_CTRL_BT_LINKID_S 3
+
+#define MCI_STAT_ALL_BT_LINKID 0xffff
#define AR_MCI_INTERRUPT_DEFAULT (AR_MCI_INTERRUPT_SW_MSG_DONE | \
AR_MCI_INTERRUPT_RX_INVALID_HDR | \
--
2.3.0
From: Sujith Manoharan <[email protected]>
Several new MCI parameters need to be handled for
new chips, add them.
Signed-off-by: Sujith Manoharan <[email protected]>
---
drivers/net/wireless/ath/ath9k/ar9003_mci.h | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mci.h b/drivers/net/wireless/ath/ath9k/ar9003_mci.h
index cef2010..e8b1914 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_mci.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_mci.h
@@ -92,6 +92,17 @@ enum mci_gpm_coex_bt_update_flags_op {
#define ATH_MCI_CONFIG_CLK_DIV 0x00003000
#define ATH_MCI_CONFIG_CLK_DIV_S 12
#define ATH_MCI_CONFIG_DISABLE_TUNING 0x00004000
+#define ATH_MCI_CONFIG_DISABLE_AIC 0x00008000
+#define ATH_MCI_CONFIG_AIC_CAL_NUM_CHAN 0x007f0000
+#define ATH_MCI_CONFIG_AIC_CAL_NUM_CHAN_S 16
+#define ATH_MCI_CONFIG_NO_QUIET_ACK 0x00800000
+#define ATH_MCI_CONFIG_NO_QUIET_ACK_S 23
+#define ATH_MCI_CONFIG_ANT_ARCH 0x07000000
+#define ATH_MCI_CONFIG_ANT_ARCH_S 24
+#define ATH_MCI_CONFIG_FORCE_QUIET_ACK 0x08000000
+#define ATH_MCI_CONFIG_FORCE_QUIET_ACK_S 27
+#define ATH_MCI_CONFIG_FORCE_2CHAIN_ACK 0x10000000
+#define ATH_MCI_CONFIG_MCI_STAT_DBG 0x20000000
#define ATH_MCI_CONFIG_MCI_WEIGHT_DBG 0x40000000
#define ATH_MCI_CONFIG_DISABLE_MCI 0x80000000
--
2.3.0
From: Sujith Manoharan <[email protected]>
If we fail to allocate the sched/gpm buffers when
initializing MCI, we bail out properly. Checking
them in ar9003_mci_reset() is unnecessary, so remove it.
Signed-off-by: Sujith Manoharan <[email protected]>
---
drivers/net/wireless/ath/ath9k/ar9003_mci.c | 5 -----
1 file changed, 5 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mci.c b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
index 7b94a6c..4aed985 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_mci.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
@@ -831,11 +831,6 @@ int ar9003_mci_reset(struct ath_hw *ah, bool en_int, bool is_2g,
ath_dbg(common, MCI, "MCI Reset (full_sleep = %d, is_2g = %d)\n",
is_full_sleep, is_2g);
- if (!mci->gpm_addr && !mci->sched_addr) {
- ath_err(common, "MCI GPM and schedule buffers are not allocated\n");
- return -ENOMEM;
- }
-
if (REG_READ(ah, AR_BTCOEX_CTRL) == 0xdeadbeef) {
ath_err(common, "BTCOEX control register is dead\n");
return -EINVAL;
--
2.3.0
> From: Sujith Manoharan <[email protected]>
>
> Signed-off-by: Sujith Manoharan <[email protected]>
Thanks, 9 patches applied to wireless-drivers-next.git:
ae55099f5b6f ath9k: Move MCI registers to reg_mci.h
7d1805e194dc ath9k: Remove useless check in MCI reset
d1d07813bb3e ath9k: Add new MCI configuration parameters
e18e164e9af5 ath9k: Handle 2-ANT AR9565 in MCI reset
d808ecd8743c ath9k: Fix MCI TX control
4d9f7c68b78d ath9k: Setup MCI statistics properly
bc80d526d302 ath9k: Prepare MCI interface correctly
ad1dc638725d ath9k: Fix GPM initialization
2f890caba6dd ath9k: Mute BT properly
Kalle Valo