Directly update the indoor setting without wrapping it as
a regulatory request, to simplify the processing.
Signed-off-by: Ilan Peer <[email protected]>
---
net/wireless/reg.c | 34 +++-------------------------------
1 file changed, 3 insertions(+), 31 deletions(-)
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index b586d0d..c24c8bf 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -82,17 +82,12 @@
* be intersected with the current one.
* @REG_REQ_ALREADY_SET: the regulatory request will not change the current
* regulatory settings, and no further processing is required.
- * @REG_REQ_USER_HINT_HANDLED: a non alpha2 user hint was handled and no
- * further processing is required, i.e., not need to update last_request
- * etc. This should be used for user hints that do not provide an alpha2
- * but some other type of regulatory hint, i.e., indoor operation.
*/
enum reg_request_treatment {
REG_REQ_OK,
REG_REQ_IGNORE,
REG_REQ_INTERSECT,
REG_REQ_ALREADY_SET,
- REG_REQ_USER_HINT_HANDLED,
};
static struct regulatory_request core_request_world = {
@@ -1248,13 +1243,6 @@ static bool reg_request_cell_base(struct regulatory_request *request)
return request->user_reg_hint_type == NL80211_USER_REG_HINT_CELL_BASE;
}
-static bool reg_request_indoor(struct regulatory_request *request)
-{
- if (request->initiator != NL80211_REGDOM_SET_BY_USER)
- return false;
- return request->user_reg_hint_type == NL80211_USER_REG_HINT_INDOOR;
-}
-
bool reg_last_request_cell_base(void)
{
return reg_request_cell_base(get_last_request());
@@ -1833,11 +1821,6 @@ __reg_process_hint_user(struct regulatory_request *user_request)
{
struct regulatory_request *lr = get_last_request();
- if (reg_request_indoor(user_request)) {
- reg_is_indoor = true;
- return REG_REQ_USER_HINT_HANDLED;
- }
-
if (reg_request_cell_base(user_request))
return reg_ignore_cell_hint(user_request);
@@ -1885,8 +1868,7 @@ reg_process_hint_user(struct regulatory_request *user_request)
treatment = __reg_process_hint_user(user_request);
if (treatment == REG_REQ_IGNORE ||
- treatment == REG_REQ_ALREADY_SET ||
- treatment == REG_REQ_USER_HINT_HANDLED) {
+ treatment == REG_REQ_ALREADY_SET) {
reg_free_request(user_request);
return treatment;
}
@@ -1947,7 +1929,6 @@ reg_process_hint_driver(struct wiphy *wiphy,
case REG_REQ_OK:
break;
case REG_REQ_IGNORE:
- case REG_REQ_USER_HINT_HANDLED:
reg_free_request(driver_request);
return treatment;
case REG_REQ_INTERSECT:
@@ -2047,7 +2028,6 @@ reg_process_hint_country_ie(struct wiphy *wiphy,
case REG_REQ_OK:
break;
case REG_REQ_IGNORE:
- case REG_REQ_USER_HINT_HANDLED:
/* fall through */
case REG_REQ_ALREADY_SET:
reg_free_request(country_ie_request);
@@ -2086,8 +2066,7 @@ static void reg_process_hint(struct regulatory_request *reg_request)
case NL80211_REGDOM_SET_BY_USER:
treatment = reg_process_hint_user(reg_request);
if (treatment == REG_REQ_IGNORE ||
- treatment == REG_REQ_ALREADY_SET ||
- treatment == REG_REQ_USER_HINT_HANDLED)
+ treatment == REG_REQ_ALREADY_SET)
return;
queue_delayed_work(system_power_efficient_wq,
®_timeout, msecs_to_jiffies(3142));
@@ -2311,16 +2290,9 @@ int regulatory_hint_user(const char *alpha2,
int regulatory_hint_indoor_user(void)
{
- struct regulatory_request *request;
- request = kzalloc(sizeof(struct regulatory_request), GFP_KERNEL);
- if (!request)
- return -ENOMEM;
- request->wiphy_idx = WIPHY_IDX_INVALID;
- request->initiator = NL80211_REGDOM_SET_BY_USER;
- request->user_reg_hint_type = NL80211_USER_REG_HINT_INDOOR;
- queue_regulatory_request(request);
+ reg_is_indoor = true;
return 0;
}
--
1.8.3.2
On Thu, 2015-03-05 at 23:55 +0100, Luis R. Rodriguez wrote:
> On Wed, Mar 04, 2015 at 12:32:07AM -0500, Ilan Peer wrote:
> > Timeout was scheduled only in case CRDA was called due to user hints,
> > but was not scheduled for other cases. This can result in regulatory
> > hint processing getting stuck in case that there is no CRDA configured.
> >
> > Change this by scheduling a timeout every time CRDA is called. In
> > addition, in restore_regulatory_settings() all pending requests are
> > restored (and not only the user ones).
> >
> > Signed-off-by: Ilan Peer <[email protected]>
>
> Acked-by: Luis R. Rodriguez <[email protected]>
>
> For all of these.
Great, all three applied, thanks guys.
johannes
Previously, the indoor setting configuration assumed that as
long as a station interface is connected, the indoor environment
setting does not change. However, this assumption is problematic
as:
- It is possible that a station interface is connected to a mobile
AP, e.g., softAP or a P2P GO, where it is possible that both the
station and the mobile AP move out of the indoor environment making
the indoor setting invalid. In such a case, user space has no way to
invalidate the setting.
- A station interface disconnection does not necessarily imply that
the device is no longer operating in an indoor environment, e.g.,
it is possible that the station interface is roaming but is still
stays indoor.
To handle the above, extend the indoor configuration API to allow
user space to indicate a change of indoor settings, and allow it to
indicate weather it controls the indoor setting, such that:
1. If the user space process explicitly indicates that it is going
to control the indoor setting, do not clear the indoor setting
internally, unless the socket is released. The user space process
should use the NL80211_ATTR_SOCKET_OWNER attribute in the command
to state that it is going to control the indoor setting.
2. Reset the indoor setting when restoring the regulatory settings in
case it is not owned by a user space process.
Based on the above, a user space tool that continuously monitors the
indoor settings, i.e., tracking power setting, location etc., can
indicate environment changes to the regulatory core.
It should be noted that currently user space is the only provided mechanism
used to hint to the regulatory core over the indoor/outdoor environment --
while the country IEs do have an environment setting this has been completely
ignored by the regulatory core by design for a while now since country IEs
typically can contain bogus data.
Signed-off-by: Ilan Peer <[email protected]>
Signed-off-by: ArikX Nemtsov <[email protected]>
---
include/uapi/linux/nl80211.h | 9 +++++++
net/wireless/nl80211.c | 19 ++++++++++++++-
net/wireless/reg.c | 57 ++++++++++++++++++++++++++++++++++++++++----
net/wireless/reg.h | 15 +++++++++++-
4 files changed, 94 insertions(+), 6 deletions(-)
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 37e7f39..ae16ba9 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -1697,6 +1697,10 @@ enum nl80211_commands {
* If set during scheduled scan start then the new scan req will be
* owned by the netlink socket that created it and the scheduled scan will
* be stopped when the socket is closed.
+ * If set during configuration of regulatory indoor operation then the
+ * regulatory indoor configuration would be owned by the netlink socket
+ * that configured the indoor setting, and the indoor operation would be
+ * cleared when the socket is closed.
*
* @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is
* the TDLS link initiator.
@@ -1752,6 +1756,9 @@ enum nl80211_commands {
*
* @NL80211_ATTR_SCHED_SCAN_DELAY: delay before a scheduled scan (or a
* WoWLAN net-detect scan) is started, u32 in seconds.
+
+ * @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device
+ * is operating in an indoor environment.
*
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
@@ -2120,6 +2127,8 @@ enum nl80211_attrs {
NL80211_ATTR_SCHED_SCAN_DELAY,
+ NL80211_ATTR_REG_INDOOR,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 07cef3d..b020853 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -399,6 +399,7 @@ static const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
[NL80211_ATTR_WIPHY_SELF_MANAGED_REG] = { .type = NLA_FLAG },
[NL80211_ATTR_NETNS_FD] = { .type = NLA_U32 },
[NL80211_ATTR_SCHED_SCAN_DELAY] = { .type = NLA_U32 },
+ [NL80211_ATTR_REG_INDOOR] = { .type = NLA_FLAG },
};
/* policy for the key attributes */
@@ -4958,7 +4959,10 @@ static int parse_reg_rule(struct nlattr *tb[],
static int nl80211_req_set_reg(struct sk_buff *skb, struct genl_info *info)
{
char *data = NULL;
+ bool is_indoor;
enum nl80211_user_reg_hint_type user_reg_hint_type;
+ u32 owner_nlportid;
+
/*
* You should only get this when cfg80211 hasn't yet initialized
@@ -4984,7 +4988,15 @@ static int nl80211_req_set_reg(struct sk_buff *skb, struct genl_info *info)
data = nla_data(info->attrs[NL80211_ATTR_REG_ALPHA2]);
return regulatory_hint_user(data, user_reg_hint_type);
case NL80211_USER_REG_HINT_INDOOR:
- return regulatory_hint_indoor_user();
+ if (info->attrs[NL80211_ATTR_SOCKET_OWNER]) {
+ owner_nlportid = info->snd_portid;
+ is_indoor = !!info->attrs[NL80211_ATTR_REG_INDOOR];
+ } else {
+ owner_nlportid = 0;
+ is_indoor = true;
+ }
+
+ return regulatory_hint_indoor(is_indoor, owner_nlportid);
default:
return -EINVAL;
}
@@ -12810,6 +12822,11 @@ static int nl80211_netlink_notify(struct notifier_block * nb,
rcu_read_unlock();
+ /*
+ * It is possible that the user space process that is controlling the
+ * indoor setting disappeared, so notify the regulatory core.
+ */
+ regulatory_netlink_notify(notify->portid);
return NOTIFY_OK;
}
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index c24c8bf..4239dd4 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -128,9 +128,12 @@ static int reg_num_devs_support_basehint;
* State variable indicating if the platform on which the devices
* are attached is operating in an indoor environment. The state variable
* is relevant for all registered devices.
- * (protected by RTNL)
*/
static bool reg_is_indoor;
+static spinlock_t reg_indoor_lock;
+
+/* Used to track the userspace process controlling the indoor setting */
+static u32 reg_is_indoor_portid;
static const struct ieee80211_regdomain *get_cfg80211_regdom(void)
{
@@ -2288,15 +2291,50 @@ int regulatory_hint_user(const char *alpha2,
return 0;
}
-int regulatory_hint_indoor_user(void)
+int regulatory_hint_indoor(bool is_indoor, u32 portid)
{
+ spin_lock(®_indoor_lock);
+
+ /* It is possible that more than one user space process is trying to
+ * configure the indoor setting. To handle such cases, clear the indoor
+ * setting in case that some process does not think that the device
+ * is operating in an indoor environment. In addition, if a user space
+ * process indicates that it is controlling the indoor setting, save its
+ * portid, i.e., make it the owner.
+ */
+ reg_is_indoor = is_indoor;
+ if (reg_is_indoor) {
+ if (!reg_is_indoor_portid)
+ reg_is_indoor_portid = portid;
+ } else {
+ reg_is_indoor_portid = 0;
+ }
+ spin_unlock(®_indoor_lock);
- reg_is_indoor = true;
+ if (!is_indoor)
+ reg_check_channels();
return 0;
}
+void regulatory_netlink_notify(u32 portid)
+{
+ spin_lock(®_indoor_lock);
+
+ if (reg_is_indoor_portid != portid) {
+ spin_unlock(®_indoor_lock);
+ return;
+ }
+
+ reg_is_indoor = false;
+ reg_is_indoor_portid = 0;
+
+ spin_unlock(®_indoor_lock);
+
+ reg_check_channels();
+}
+
/* Driver hints */
int regulatory_hint(struct wiphy *wiphy, const char *alpha2)
{
@@ -2464,7 +2502,17 @@ static void restore_regulatory_settings(bool reset_user)
ASSERT_RTNL();
- reg_is_indoor = false;
+ /*
+ * Clear the indoor setting in case that it is not controlled by user
+ * space, as otherwise there is no guarantee that the device is still
+ * operating in an indoor environment.
+ */
+ spin_lock(®_indoor_lock);
+ if (reg_is_indoor && !reg_is_indoor_portid) {
+ reg_is_indoor = false;
+ reg_check_channels();
+ }
+ spin_unlock(®_indoor_lock);
reset_regdomains(true, &world_regdom);
restore_alpha2(alpha2, reset_user);
@@ -3061,6 +3109,7 @@ int __init regulatory_init(void)
spin_lock_init(®_requests_lock);
spin_lock_init(®_pending_beacons_lock);
+ spin_lock_init(®_indoor_lock);
reg_regdb_size_check();
diff --git a/net/wireless/reg.h b/net/wireless/reg.h
index 4b45d6e..a2c4e16 100644
--- a/net/wireless/reg.h
+++ b/net/wireless/reg.h
@@ -25,7 +25,20 @@ enum nl80211_dfs_regions reg_get_dfs_region(struct wiphy *wiphy);
int regulatory_hint_user(const char *alpha2,
enum nl80211_user_reg_hint_type user_reg_hint_type);
-int regulatory_hint_indoor_user(void);
+
+/**
+ * regulatory_hint_indoor - hint operation in indoor env. or not
+ * @is_indoor: if true indicates that user space thinks that the
+ * device is operating in an indoor environment.
+ * @portid: the netlink port ID on which the hint was given.
+ */
+int regulatory_hint_indoor(bool is_indoor, u32 portid);
+
+/**
+ * regulatory_netlink_notify - notify on released netlink socket
+ * @portid: the netlink socket port ID
+ */
+void regulatory_netlink_notify(u32 portid);
void wiphy_regulatory_register(struct wiphy *wiphy);
void wiphy_regulatory_deregister(struct wiphy *wiphy);
--
1.8.3.2
Timeout was scheduled only in case CRDA was called due to user hints,
but was not scheduled for other cases. This can result in regulatory
hint processing getting stuck in case that there is no CRDA configured.
Change this by scheduling a timeout every time CRDA is called. In
addition, in restore_regulatory_settings() all pending requests are
restored (and not only the user ones).
Signed-off-by: Ilan Peer <[email protected]>
---
net/wireless/reg.c | 15 +++++----------
1 file changed, 5 insertions(+), 10 deletions(-)
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 4239dd4..d867103 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -552,6 +552,9 @@ reg_call_crda(struct regulatory_request *request)
{
if (call_crda(request->alpha2))
return REG_REQ_IGNORE;
+
+ queue_delayed_work(system_power_efficient_wq,
+ ®_timeout, msecs_to_jiffies(3142));
return REG_REQ_OK;
}
@@ -1791,8 +1794,7 @@ static void reg_set_request_processed(void)
need_more_processing = true;
spin_unlock(®_requests_lock);
- if (lr->initiator == NL80211_REGDOM_SET_BY_USER)
- cancel_delayed_work(®_timeout);
+ cancel_delayed_work(®_timeout);
if (need_more_processing)
schedule_work(®_work);
@@ -2071,8 +2073,6 @@ static void reg_process_hint(struct regulatory_request *reg_request)
if (treatment == REG_REQ_IGNORE ||
treatment == REG_REQ_ALREADY_SET)
return;
- queue_delayed_work(system_power_efficient_wq,
- ®_timeout, msecs_to_jiffies(3142));
return;
case NL80211_REGDOM_SET_BY_DRIVER:
if (!wiphy)
@@ -2496,7 +2496,6 @@ static void restore_regulatory_settings(bool reset_user)
char alpha2[2];
char world_alpha2[2];
struct reg_beacon *reg_beacon, *btmp;
- struct regulatory_request *reg_request, *tmp;
LIST_HEAD(tmp_reg_req_list);
struct cfg80211_registered_device *rdev;
@@ -2524,11 +2523,7 @@ static void restore_regulatory_settings(bool reset_user)
* settings.
*/
spin_lock(®_requests_lock);
- list_for_each_entry_safe(reg_request, tmp, ®_requests_list, list) {
- if (reg_request->initiator != NL80211_REGDOM_SET_BY_USER)
- continue;
- list_move_tail(®_request->list, &tmp_reg_req_list);
- }
+ list_splice_tail_init(®_requests_list, &tmp_reg_req_list);
spin_unlock(®_requests_lock);
/* Clear beacon hints */
--
1.8.3.2
On Wed, Mar 04, 2015 at 12:32:07AM -0500, Ilan Peer wrote:
> Timeout was scheduled only in case CRDA was called due to user hints,
> but was not scheduled for other cases. This can result in regulatory
> hint processing getting stuck in case that there is no CRDA configured.
>
> Change this by scheduling a timeout every time CRDA is called. In
> addition, in restore_regulatory_settings() all pending requests are
> restored (and not only the user ones).
>
> Signed-off-by: Ilan Peer <[email protected]>
Acked-by: Luis R. Rodriguez <[email protected]>
For all of these.
Luis
On Wed, Mar 04, 2015 at 12:32:06AM -0500, Ilan Peer wrote:
> -int regulatory_hint_indoor_user(void)
> +int regulatory_hint_indoor(bool is_indoor, u32 portid)
> {
> + spin_lock(®_indoor_lock);
> +
> + /* It is possible that more than one user space process is trying to
> + * configure the indoor setting. To handle such cases, clear the indoor
> + * setting in case that some process does not think that the device
> + * is operating in an indoor environment. In addition, if a user space
> + * process indicates that it is controlling the indoor setting, save its
> + * portid, i.e., make it the owner.
> + */
> + reg_is_indoor = is_indoor;
> + if (reg_is_indoor) {
> + if (!reg_is_indoor_portid)
> + reg_is_indoor_portid = portid;
> + } else {
> + reg_is_indoor_portid = 0;
> + }
>
> + spin_unlock(®_indoor_lock);
>
> - reg_is_indoor = true;
> + if (!is_indoor)
> + reg_check_channels();
>
> return 0;
> }
OK lets start with this...
Luis
Thanks :)
Ilan.
> -----Original Message-----
> From: Luis R. Rodriguez [mailto:[email protected]]
> Sent: Friday, March 06, 2015 00:55
> To: Peer, Ilan
> Cc: [email protected]
> Subject: Re: [PATCH v10 3/3] cfg80211: Schedule timeout for all CRDA calls
>
> On Wed, Mar 04, 2015 at 12:32:07AM -0500, Ilan Peer wrote:
> > Timeout was scheduled only in case CRDA was called due to user hints,
> > but was not scheduled for other cases. This can result in regulatory
> > hint processing getting stuck in case that there is no CRDA configured.
> >
> > Change this by scheduling a timeout every time CRDA is called. In
> > addition, in restore_regulatory_settings() all pending requests are
> > restored (and not only the user ones).
> >
> > Signed-off-by: Ilan Peer <[email protected]>
>
> Acked-by: Luis R. Rodriguez <[email protected]>
>
> For all of these.
>
> Luis