From: Miaoqing Pan <[email protected]>
ar9550 or later chips, the AR_GPIO_IN_OUT register only can
control GPIO[0:3]. For the extra GPIO, use standard GPIO calls
instead of WMAC internal registers.
Signed-off-by: Miaoqing Pan <[email protected]>
---
drivers/net/wireless/ath/ath9k/gpio.c | 8 +++++++-
drivers/net/wireless/ath/ath9k/hw.c | 17 +++++++++++++++--
drivers/net/wireless/ath/ath9k/hw.h | 1 +
drivers/net/wireless/ath/ath9k/reg.h | 4 ++++
4 files changed, 27 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/gpio.c b/drivers/net/wireless/ath/ath9k/gpio.c
index 86d46c1..2847067 100644
--- a/drivers/net/wireless/ath/ath9k/gpio.c
+++ b/drivers/net/wireless/ath/ath9k/gpio.c
@@ -69,9 +69,15 @@ void ath_fill_led_pin(struct ath_softc *sc)
{
struct ath_hw *ah = sc->sc_ah;
- if (AR_SREV_9100(ah) || (ah->led_pin >= 0))
+ if (AR_SREV_9100(ah))
return;
+ if (ah->led_pin >= 0) {
+ if (!((1 << ah->led_pin) & AR_GPIO_OE_OUT_MASK))
+ ath9k_hw_request_gpio(ah, ah->led_pin, "ath9k-led");
+ return;
+ }
+
if (AR_SREV_9287(ah))
ah->led_pin = ATH_LED_PIN_9287;
else if (AR_SREV_9485(sc->sc_ah))
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index a8c87df..fd9ca2b 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -20,6 +20,7 @@
#include <linux/time.h>
#include <linux/bitops.h>
#include <linux/etherdevice.h>
+#include <linux/gpio.h>
#include <asm/unaligned.h>
#include "hw.h"
@@ -2677,11 +2678,23 @@ void ath9k_hw_set_gpio(struct ath_hw *ah, u32 gpio, u32 val)
if (AR_SREV_9271(ah))
val = ~val;
- REG_RMW(ah, AR_GPIO_IN_OUT, ((val & 1) << gpio),
- AR_GPIO_BIT(gpio));
+ if ((1 << gpio) & AR_GPIO_OE_OUT_MASK)
+ REG_RMW(ah, AR_GPIO_IN_OUT, ((val & 1) << gpio),
+ AR_GPIO_BIT(gpio));
+ else
+ gpio_set_value(gpio, val & 1);
}
EXPORT_SYMBOL(ath9k_hw_set_gpio);
+void ath9k_hw_request_gpio(struct ath_hw *ah, u32 gpio, const char *label)
+{
+ if (gpio >= ah->caps.num_gpio_pins)
+ return;
+
+ gpio_request_one(gpio, GPIOF_DIR_OUT | GPIOF_INIT_LOW, label);
+}
+EXPORT_SYMBOL(ath9k_hw_request_gpio);
+
void ath9k_hw_setantenna(struct ath_hw *ah, u32 antenna)
{
REG_WRITE(ah, AR_DEF_ANTENNA, (antenna & 0x7));
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index aaec945..bcbf117 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -1010,6 +1010,7 @@ u32 ath9k_hw_gpio_get(struct ath_hw *ah, u32 gpio);
void ath9k_hw_cfg_output(struct ath_hw *ah, u32 gpio,
u32 ah_signal_type);
void ath9k_hw_set_gpio(struct ath_hw *ah, u32 gpio, u32 val);
+void ath9k_hw_request_gpio(struct ath_hw *ah, u32 gpio, const char *label);
void ath9k_hw_setantenna(struct ath_hw *ah, u32 antenna);
/* General Operation */
diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h
index 1234399..caba54d 100644
--- a/drivers/net/wireless/ath/ath9k/reg.h
+++ b/drivers/net/wireless/ath/ath9k/reg.h
@@ -958,6 +958,8 @@
#define AR_SREV_9550(_ah) \
(((_ah)->hw_version.macVersion == AR_SREV_VERSION_9550))
+#define AR_SREV_9550_OR_LATER(_ah) \
+ (((_ah)->hw_version.macVersion >= AR_SREV_VERSION_9550))
#define AR_SREV_9580(_ah) \
(((_ah)->hw_version.macVersion == AR_SREV_VERSION_9580) && \
@@ -1128,6 +1130,8 @@ enum {
#define AR_GPIO_OE_OUT (AR_SREV_9340(ah) ? 0x4030 : \
(AR_SREV_9300_20_OR_LATER(ah) ? 0x4050 : 0x404c))
+#define AR_GPIO_OE_OUT_MASK (AR_SREV_9550_OR_LATER(ah) ? \
+ 0x0000000F : 0xFFFFFFFF)
#define AR_GPIO_OE_OUT_DRV 0x3
#define AR_GPIO_OE_OUT_DRV_NO 0x0
#define AR_GPIO_OE_OUT_DRV_LOW 0x1
--
1.9.1
> From: Miaoqing Pan <[email protected]>
>
> ar9550 or later chips, the AR_GPIO_IN_OUT register only can
> control GPIO[0:3]. For the extra GPIO, use standard GPIO calls
> instead of WMAC internal registers.
>
> Signed-off-by: Miaoqing Pan <[email protected]>
Thanks, applied to wireless-drivers-next.git.
Kalle Valo