commit "a521ee983d312db7 ath10k: Add new reg_address/mask to hw register
table" commit has broken the QCA61x4 support, by providing wrong
fw_indicator_address, which shall be 0x0003a028 instead of 0x00009028.
User experience was a failing boot up sequence (crashing device during
initialization)
[ 181.663874] ath10k_pci 0000:02:00.0: enabling device (0000 -> 0002)
[ 181.664787] ath10k_pci 0000:02:00.0: pci irq msi-x interrupts 8 irq_mode 0 reset_mode 0
[ 181.688886] ath10k_pci 0000:02:00.0: device has crashed during init
[ 181.688897] ath10k_pci 0000:02:00.0: failed to wait for target after cold reset: -70
[ 181.688902] ath10k_pci 0000:02:00.0: failed to reset chip: -70
[ 181.689774] ath10k_pci: probe of 0000:02:00.0 failed with error -70
Fix it by updating the address with correct value.
Signed-off-by: Bartosz Markowski <[email protected]>
---
drivers/net/wireless/ath/ath10k/hw.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/hw.c b/drivers/net/wireless/ath/ath10k/hw.c
index 1414e1f3c7ac..fef7ccf6e185 100644
--- a/drivers/net/wireless/ath/ath10k/hw.c
+++ b/drivers/net/wireless/ath/ath10k/hw.c
@@ -63,7 +63,7 @@ const struct ath10k_hw_regs qca6174_regs = {
.soc_reset_control_ce_rst_mask = 0x00000001,
.soc_chip_id_address = 0x000000f0,
.scratch_3_address = 0x00000028,
- .fw_indicator_address = 0x00009028,
+ .fw_indicator_address = 0x0003a028,
.pcie_local_base_address = 0x00080000,
.ce_wrap_intr_sum_host_msi_lsb = 0x00000008,
.ce_wrap_intr_sum_host_msi_mask = 0x0000ff00,
--
2.1.2
Bartosz Markowski <[email protected]> writes:
> commit "a521ee983d312db7 ath10k: Add new reg_address/mask to hw register
> table" commit has broken the QCA61x4 support, by providing wrong
> fw_indicator_address, which shall be 0x0003a028 instead of 0x00009028.
>
> User experience was a failing boot up sequence (crashing device during
> initialization)
>
> [ 181.663874] ath10k_pci 0000:02:00.0: enabling device (0000 -> 0002)
> [ 181.664787] ath10k_pci 0000:02:00.0: pci irq msi-x interrupts 8 irq_mode 0 reset_mode 0
> [ 181.688886] ath10k_pci 0000:02:00.0: device has crashed during init
> [ 181.688897] ath10k_pci 0000:02:00.0: failed to wait for target after cold reset: -70
> [ 181.688902] ath10k_pci 0000:02:00.0: failed to reset chip: -70
> [ 181.689774] ath10k_pci: probe of 0000:02:00.0 failed with error -70
>
> Fix it by updating the address with correct value.
>
> Signed-off-by: Bartosz Markowski <[email protected]>
Thanks, applied.
--
Kalle Valo