2015-03-25 21:18:50

by Marek Vasut

Subject: [PATCH] rtlwifi: rtl8192cu: Add new device ID

Add new ID for ASUS N10 WiFi dongle.

Signed-off-by: Marek Vasut <[email protected]>
Cc: Larry Finger <[email protected]>
Cc: John W. Linville <[email protected]>
Cc: Chaoming Li <[email protected]>
---
drivers/net/wireless/rtlwifi/rtl8192cu/sw.c | 1 +
1 file changed, 1 insertion(+)

Bus 001 Device 004: ID 0b05:17ba ASUSTek Computer, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0b05 ASUSTek Computer, Inc.
idProduct 0x17ba
bcdDevice 2.00
iManufacturer 1 Realtek
iProduct 2 802.11n WLAN Adapter
iSerial 3 00e04c000001
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 46
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)

diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
index 90a714c..d451d2b 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
@@ -360,6 +360,7 @@ static struct usb_device_id rtl8192c_usb_ids[] = {
{RTL_USB_DEVICE(0x04f2, 0xaffb, rtl92cu_hal_cfg)}, /*Xavi*/
{RTL_USB_DEVICE(0x04f2, 0xaffc, rtl92cu_hal_cfg)}, /*Xavi*/
{RTL_USB_DEVICE(0x2019, 0x1201, rtl92cu_hal_cfg)}, /*Planex-Vencer*/
+ {RTL_USB_DEVICE(0x0b05, 0x17ba, rtl92cu_hal_cfg)}, /*ASUS-Edimax*/

/****** 8192CU ********/
{RTL_USB_DEVICE(0x050d, 0x1004, rtl92cu_hal_cfg)}, /*Belcom-SurfN300*/
--
2.1.4

2015-08-19 15:33:33

by Adrien Schildknecht

Subject: [PATCH v2] rtlwifi: rtl8192cu: Add new device ID

The v2 of NetGear WNA1000M uses a different idProduct: USB ID 0846:9043

Signed-off-by: Adrien Schildknecht <[email protected]>
Cc: Stable <[email protected]>
---
drivers/net/wireless/rtlwifi/rtl8192cu/sw.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
index 23806c2..fd4a535 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
@@ -321,6 +321,7 @@ static struct usb_device_id rtl8192c_usb_ids[] = {
{RTL_USB_DEVICE(0x07b8, 0x8188, rtl92cu_hal_cfg)}, /*Abocom - Abocom*/
{RTL_USB_DEVICE(0x07b8, 0x8189, rtl92cu_hal_cfg)}, /*Funai - Abocom*/
{RTL_USB_DEVICE(0x0846, 0x9041, rtl92cu_hal_cfg)}, /*NetGear WNA1000M*/
+ {RTL_USB_DEVICE(0x0846, 0x9043, rtl92cu_hal_cfg)}, /*NG WNA1000Mv2*/
{RTL_USB_DEVICE(0x0b05, 0x17ba, rtl92cu_hal_cfg)}, /*ASUS-Edimax*/
{RTL_USB_DEVICE(0x0bda, 0x5088, rtl92cu_hal_cfg)}, /*Thinkware-CC&C*/
{RTL_USB_DEVICE(0x0df6, 0x0052, rtl92cu_hal_cfg)}, /*Sitecom - Edimax*/
--
2.5.0

2015-08-19 15:59:06

by Larry Finger

Subject: Re: [PATCH v2] rtlwifi: rtl8192cu: Add new device ID

On 08/19/2015 10:33 AM, Adrien Schildknecht wrote:
> The v2 of NetGear WNA1000M uses a different idProduct: USB ID 0846:9043
>
> Signed-off-by: Adrien Schildknecht <[email protected]>
> Cc: Stable <[email protected]>
> ---
> drivers/net/wireless/rtlwifi/rtl8192cu/sw.c | 1 +
> 1 file changed, 1 insertion(+)

Acked-by: Larry Finger <[email protected]>

Thanks,

Larry

>
> diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
> index 23806c2..fd4a535 100644
> --- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
> +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
> @@ -321,6 +321,7 @@ static struct usb_device_id rtl8192c_usb_ids[] = {
> {RTL_USB_DEVICE(0x07b8, 0x8188, rtl92cu_hal_cfg)}, /*Abocom - Abocom*/
> {RTL_USB_DEVICE(0x07b8, 0x8189, rtl92cu_hal_cfg)}, /*Funai - Abocom*/
> {RTL_USB_DEVICE(0x0846, 0x9041, rtl92cu_hal_cfg)}, /*NetGear WNA1000M*/
> + {RTL_USB_DEVICE(0x0846, 0x9043, rtl92cu_hal_cfg)}, /*NG WNA1000Mv2*/
> {RTL_USB_DEVICE(0x0b05, 0x17ba, rtl92cu_hal_cfg)}, /*ASUS-Edimax*/
> {RTL_USB_DEVICE(0x0bda, 0x5088, rtl92cu_hal_cfg)}, /*Thinkware-CC&C*/
> {RTL_USB_DEVICE(0x0df6, 0x0052, rtl92cu_hal_cfg)}, /*Sitecom - Edimax*/
>

2015-08-25 12:25:49

by Kalle Valo

Subject: Re: [v2] rtlwifi: rtl8192cu: Add new device ID

> The v2 of NetGear WNA1000M uses a different idProduct: USB ID 0846:9043
>
> Signed-off-by: Adrien Schildknecht <[email protected]>
> Cc: Stable <[email protected]>
> Acked-by: Larry Finger <[email protected]>

Thanks, applied to wireless-drivers-next.git.

Kalle Valo

2015-08-19 14:42:25

by Larry Finger

Subject: Re: [PATCH] rtlwifi: rtl8192cu: Add new device ID

On 08/19/2015 08:51 AM, Adrien Schildknecht wrote:
> The v2 of NetGear WNA1000M uses a different idProduct: USB ID 0846:9043
>
> Signed-off-by: Adrien Schildknecht <[email protected]>

Add a "Cc: Stable <[email protected]>" line here. That way the new ID will
be available with older kernels.

The new line exceeds 80 characters. You might abbreviate Netgear as NG.

When you resubmit, do so as "[PATCH V2]".

Thanks,

Larry

> ---
> drivers/net/wireless/rtlwifi/rtl8192cu/sw.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
> index 23806c2..8b4238a 100644
> --- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
> +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
> @@ -321,6 +321,7 @@ static struct usb_device_id rtl8192c_usb_ids[] = {
> {RTL_USB_DEVICE(0x07b8, 0x8188, rtl92cu_hal_cfg)}, /*Abocom - Abocom*/
> {RTL_USB_DEVICE(0x07b8, 0x8189, rtl92cu_hal_cfg)}, /*Funai - Abocom*/
> {RTL_USB_DEVICE(0x0846, 0x9041, rtl92cu_hal_cfg)}, /*NetGear WNA1000M*/
> + {RTL_USB_DEVICE(0x0846, 0x9043, rtl92cu_hal_cfg)}, /*NetGear WNA1000Mv2*/
> {RTL_USB_DEVICE(0x0b05, 0x17ba, rtl92cu_hal_cfg)}, /*ASUS-Edimax*/
> {RTL_USB_DEVICE(0x0bda, 0x5088, rtl92cu_hal_cfg)}, /*Thinkware-CC&C*/
> {RTL_USB_DEVICE(0x0df6, 0x0052, rtl92cu_hal_cfg)}, /*Sitecom - Edimax*/
>

2015-08-19 14:27:24

by Adrien Schildknecht

Subject: Re: [PATCH] rtlwifi: rtl8192cu: Add new device ID

> Has this ID been tested with the Netgear device?
Yes, I have been using the device and the patch for 2 days.

--
Adrien Schildknecht