From: Miaoqing Pan <[email protected]>
When rx stopped, AR_RX_FILTER should be cleared, but in
ath9k_hw_setrxfilter(), ATH9K_RX_FILTER_CONTROL_WRAPPER will always
be set for ar9462/ar9565.
Fix this by moving the code in ath9k_hw_setrxfilter() to
ath_calcrxfilter().
Signed-off-by: Miaoqing Pan <[email protected]>
---
drivers/net/wireless/ath/ath9k/hw.c | 3 ---
drivers/net/wireless/ath/ath9k/recv.c | 3 +++
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index a31a680..0e2b28c 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -2760,9 +2760,6 @@ void ath9k_hw_setrxfilter(struct ath_hw *ah, u32 bits)
ENABLE_REGWRITE_BUFFER(ah);
- if (AR_SREV_9462(ah) || AR_SREV_9565(ah))
- bits |= ATH9K_RX_FILTER_CONTROL_WRAPPER;
-
REG_WRITE(ah, AR_RX_FILTER, bits);
phybits = 0;
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index d3189da..0689f6b 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -424,6 +424,9 @@ u32 ath_calcrxfilter(struct ath_softc *sc)
AR_SREV_9561(sc->sc_ah))
rfilt |= ATH9K_RX_FILTER_4ADDRESS;
+ if (AR_SREV_9462(sc->sc_ah) || AR_SREV_9565(sc->sc_ah))
+ rfilt |= ATH9K_RX_FILTER_CONTROL_WRAPPER;
+
if (ath9k_is_chanctx_enabled() &&
test_bit(ATH_OP_SCANNING, &common->op_flags))
rfilt |= ATH9K_RX_FILTER_BEACON;
--
1.9.1