* Clarifying the naming scheme for QCA9377 targets
* Adding the dev_id mathod (RFC) as a HW identification helper
* updating missing hw_params for 1.1 target
---
Notes:
v2:
* rebase
* fix the whitespace mess in patch 4/4 [Kalle]
Bartosz Markowski (4):
ath10k: fix the currently supported QCA9377 target version name
ath10k: update missing hw_params of QCA9377 hw1.1
ath10k: introduce dev_id to hw_params
ath10k: add QCA9377 hw1.0 support
drivers/net/wireless/ath/ath10k/core.c | 49 ++++++++++++++++++++++++++++++++--
drivers/net/wireless/ath/ath10k/core.h | 1 +
drivers/net/wireless/ath/ath10k/hw.h | 17 ++++++++++--
drivers/net/wireless/ath/ath10k/pci.c | 8 ++----
4 files changed, 65 insertions(+), 10 deletions(-)
--
2.1.2
Bartosz Markowski <[email protected]> writes:
> * Clarifying the naming scheme for QCA9377 targets
> * Adding the dev_id mathod (RFC) as a HW identification helper
> * updating missing hw_params for 1.1 target
>
> ---
>
> Notes:
> v2:
> * rebase
> * fix the whitespace mess in patch 4/4 [Kalle]
>
> Bartosz Markowski (4):
> ath10k: fix the currently supported QCA9377 target version name
> ath10k: update missing hw_params of QCA9377 hw1.1
> ath10k: introduce dev_id to hw_params
> ath10k: add QCA9377 hw1.0 support
Applied to ath-current, thanks.
--
Kalle Valo
The uart_pin was incorrectly configured for QCA9377
and the recently added hw_params were omitted.
Signed-off-by: Bartosz Markowski <[email protected]>
---
drivers/net/wireless/ath/ath10k/core.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 11e42720035b..345770f1625a 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -141,8 +141,10 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.id = QCA9377_HW_1_1_DEV_VERSION,
.name = "qca9377 hw1.1",
.patch_load_addr = QCA9377_HW_1_0_PATCH_LOAD_ADDR,
- .uart_pin = 7,
+ .uart_pin = 6,
.otp_exe_param = 0,
+ .channel_counters_freq_hz = 88000,
+ .max_probe_resp_desc_thres = 0,
.fw = {
.dir = QCA9377_HW_1_0_FW_DIR,
.fw = QCA9377_HW_1_0_FW_FILE,
--
2.1.2
When introducing the original QCA9377 support, the chip target
version was wrongly picked. The chip advertising itself with
bmi target value equal to 0x05020001 is in fact a 1.1 revision.
I realized this once I got a real 1.1 hw to play with.
Signed-off-by: Bartosz Markowski <[email protected]>
---
drivers/net/wireless/ath/ath10k/core.c | 4 ++--
drivers/net/wireless/ath/ath10k/hw.h | 8 ++++++--
drivers/net/wireless/ath/ath10k/pci.c | 2 +-
3 files changed, 9 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index dc4fc4e8d5ef..11e42720035b 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -138,8 +138,8 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
},
},
{
- .id = QCA9377_HW_1_0_DEV_VERSION,
- .name = "qca9377 hw1.0",
+ .id = QCA9377_HW_1_1_DEV_VERSION,
+ .name = "qca9377 hw1.1",
.patch_load_addr = QCA9377_HW_1_0_PATCH_LOAD_ADDR,
.uart_pin = 7,
.otp_exe_param = 0,
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 557d8d2d06aa..62d6dd569090 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -42,6 +42,8 @@
#define QCA6174_HW_3_0_VERSION 0x05020000
#define QCA6174_HW_3_2_VERSION 0x05030000
+#define QCA9377_HW_1_1_DEV_VERSION 0x05020001
+
enum qca6174_pci_rev {
QCA6174_PCI_REV_1_1 = 0x11,
QCA6174_PCI_REV_1_3 = 0x13,
@@ -60,6 +62,10 @@ enum qca6174_chip_id_rev {
QCA6174_HW_3_2_CHIP_ID_REV = 10,
};
+enum qca9377_chip_id_rev {
+ QCA9377_HW_1_1_CHIP_ID_REV = 0x1,
+};
+
#define QCA6174_HW_2_1_FW_DIR "ath10k/QCA6174/hw2.1"
#define QCA6174_HW_2_1_FW_FILE "firmware.bin"
#define QCA6174_HW_2_1_OTP_FILE "otp.bin"
@@ -85,8 +91,6 @@ enum qca6174_chip_id_rev {
#define QCA99X0_HW_2_0_PATCH_LOAD_ADDR 0x1234
/* QCA9377 1.0 definitions */
-#define QCA9377_HW_1_0_DEV_VERSION 0x05020001
-#define QCA9377_HW_1_0_CHIP_ID_REV 0x1
#define QCA9377_HW_1_0_FW_DIR ATH10K_FW_DIR "/QCA9377/hw1.0"
#define QCA9377_HW_1_0_FW_FILE "firmware.bin"
#define QCA9377_HW_1_0_OTP_FILE "otp.bin"
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 5c91a673cf80..b3ab44c6fd18 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -92,7 +92,7 @@ static const struct ath10k_pci_supp_chip ath10k_pci_supp_chips[] = {
{ QCA6174_2_1_DEVICE_ID, QCA6174_HW_3_2_CHIP_ID_REV },
{ QCA99X0_2_0_DEVICE_ID, QCA99X0_HW_2_0_CHIP_ID_REV },
- { QCA9377_1_0_DEVICE_ID, QCA9377_HW_1_0_CHIP_ID_REV },
+ { QCA9377_1_0_DEVICE_ID, QCA9377_HW_1_1_CHIP_ID_REV },
};
static void ath10k_pci_buffer_cleanup(struct ath10k *ar);
--
2.1.2
A follow up patch introducing a QCA9377 hw1.0 support will need
this device identification helper for an explicit distinction of
HWs, as apparently both QCA6174 hw3.0 and QCA9377 share the same BMI
target version (0x0502000x). For the QCA9377 hw1.1 previously
added we were just lucky we did not overlap with the same chip_id_rev.
Signed-off-by: Bartosz Markowski <[email protected]>
---
drivers/net/wireless/ath/ath10k/core.c | 27 ++++++++++++++++++++++++++-
drivers/net/wireless/ath/ath10k/core.h | 1 +
drivers/net/wireless/ath/ath10k/hw.h | 6 ++++++
drivers/net/wireless/ath/ath10k/pci.c | 6 ------
4 files changed, 33 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 345770f1625a..9b32cb38eb45 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -51,6 +51,7 @@ MODULE_PARM_DESC(rawmode, "Use raw 802.11 frame datapath");
static const struct ath10k_hw_params ath10k_hw_params_list[] = {
{
.id = QCA988X_HW_2_0_VERSION,
+ .dev_id = QCA988X_2_0_DEVICE_ID,
.name = "qca988x hw2.0",
.patch_load_addr = QCA988X_HW_2_0_PATCH_LOAD_ADDR,
.uart_pin = 7,
@@ -69,6 +70,25 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
},
{
.id = QCA6174_HW_2_1_VERSION,
+ .dev_id = QCA6164_2_1_DEVICE_ID,
+ .name = "qca6164 hw2.1",
+ .patch_load_addr = QCA6174_HW_2_1_PATCH_LOAD_ADDR,
+ .uart_pin = 6,
+ .otp_exe_param = 0,
+ .channel_counters_freq_hz = 88000,
+ .max_probe_resp_desc_thres = 0,
+ .fw = {
+ .dir = QCA6174_HW_2_1_FW_DIR,
+ .fw = QCA6174_HW_2_1_FW_FILE,
+ .otp = QCA6174_HW_2_1_OTP_FILE,
+ .board = QCA6174_HW_2_1_BOARD_DATA_FILE,
+ .board_size = QCA6174_BOARD_DATA_SZ,
+ .board_ext_size = QCA6174_BOARD_EXT_DATA_SZ,
+ },
+ },
+ {
+ .id = QCA6174_HW_2_1_VERSION,
+ .dev_id = QCA6174_2_1_DEVICE_ID,
.name = "qca6174 hw2.1",
.patch_load_addr = QCA6174_HW_2_1_PATCH_LOAD_ADDR,
.uart_pin = 6,
@@ -86,6 +106,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
},
{
.id = QCA6174_HW_3_0_VERSION,
+ .dev_id = QCA6174_2_1_DEVICE_ID,
.name = "qca6174 hw3.0",
.patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR,
.uart_pin = 6,
@@ -103,6 +124,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
},
{
.id = QCA6174_HW_3_2_VERSION,
+ .dev_id = QCA6174_2_1_DEVICE_ID,
.name = "qca6174 hw3.2",
.patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR,
.uart_pin = 6,
@@ -121,6 +143,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
},
{
.id = QCA99X0_HW_2_0_DEV_VERSION,
+ .dev_id = QCA99X0_2_0_DEVICE_ID,
.name = "qca99x0 hw2.0",
.patch_load_addr = QCA99X0_HW_2_0_PATCH_LOAD_ADDR,
.uart_pin = 7,
@@ -139,6 +162,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
},
{
.id = QCA9377_HW_1_1_DEV_VERSION,
+ .dev_id = QCA9377_1_0_DEVICE_ID,
.name = "qca9377 hw1.1",
.patch_load_addr = QCA9377_HW_1_0_PATCH_LOAD_ADDR,
.uart_pin = 6,
@@ -1266,7 +1290,8 @@ static int ath10k_init_hw_params(struct ath10k *ar)
for (i = 0; i < ARRAY_SIZE(ath10k_hw_params_list); i++) {
hw_params = &ath10k_hw_params_list[i];
- if (hw_params->id == ar->target_version)
+ if (hw_params->id == ar->target_version &&
+ hw_params->dev_id == ar->dev_id)
break;
}
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index c16f3484dc8a..938431ffed4d 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -643,6 +643,7 @@ struct ath10k {
struct ath10k_hw_params {
u32 id;
+ u16 dev_id;
const char *name;
u32 patch_load_addr;
int uart_pin;
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 62d6dd569090..3a5c68ac5d34 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -22,6 +22,12 @@
#define ATH10K_FW_DIR "ath10k"
+#define QCA988X_2_0_DEVICE_ID (0x003c)
+#define QCA6164_2_1_DEVICE_ID (0x0041)
+#define QCA6174_2_1_DEVICE_ID (0x003e)
+#define QCA99X0_2_0_DEVICE_ID (0x0040)
+#define QCA9377_1_0_DEVICE_ID (0x0042)
+
/* QCA988X 1.0 definitions (unsupported) */
#define QCA988X_HW_1_0_CHIP_ID_REV 0x0
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index b3ab44c6fd18..0be43b80a9a4 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -57,12 +57,6 @@ MODULE_PARM_DESC(reset_mode, "0: auto, 1: warm only (default: 0)");
#define ATH10K_PCI_TARGET_WAIT 3000
#define ATH10K_PCI_NUM_WARM_RESET_ATTEMPTS 3
-#define QCA988X_2_0_DEVICE_ID (0x003c)
-#define QCA6164_2_1_DEVICE_ID (0x0041)
-#define QCA6174_2_1_DEVICE_ID (0x003e)
-#define QCA99X0_2_0_DEVICE_ID (0x0040)
-#define QCA9377_1_0_DEVICE_ID (0x0042)
-
static const struct pci_device_id ath10k_pci_id_table[] = {
{ PCI_VDEVICE(ATHEROS, QCA988X_2_0_DEVICE_ID) }, /* PCI-E QCA988X V2 */
{ PCI_VDEVICE(ATHEROS, QCA6164_2_1_DEVICE_ID) }, /* PCI-E QCA6164 V2.1 */
--
2.1.2
Add new BMI target version and chip id revision. Register it
on supported chips list.
Signed-off-by: Bartosz Markowski <[email protected]>
---
drivers/net/wireless/ath/ath10k/core.c | 18 ++++++++++++++++++
drivers/net/wireless/ath/ath10k/hw.h | 3 +++
drivers/net/wireless/ath/ath10k/pci.c | 2 ++
3 files changed, 23 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 9b32cb38eb45..c02e7038a1e6 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -161,6 +161,24 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
},
},
{
+ .id = QCA9377_HW_1_0_DEV_VERSION,
+ .dev_id = QCA9377_1_0_DEVICE_ID,
+ .name = "qca9377 hw1.0",
+ .patch_load_addr = QCA9377_HW_1_0_PATCH_LOAD_ADDR,
+ .uart_pin = 6,
+ .otp_exe_param = 0,
+ .channel_counters_freq_hz = 88000,
+ .max_probe_resp_desc_thres = 0,
+ .fw = {
+ .dir = QCA9377_HW_1_0_FW_DIR,
+ .fw = QCA9377_HW_1_0_FW_FILE,
+ .otp = QCA9377_HW_1_0_OTP_FILE,
+ .board = QCA9377_HW_1_0_BOARD_DATA_FILE,
+ .board_size = QCA9377_BOARD_DATA_SZ,
+ .board_ext_size = QCA9377_BOARD_EXT_DATA_SZ,
+ },
+ },
+ {
.id = QCA9377_HW_1_1_DEV_VERSION,
.dev_id = QCA9377_1_0_DEVICE_ID,
.name = "qca9377 hw1.1",
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 3a5c68ac5d34..8ef3c0e487b8 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -48,6 +48,8 @@
#define QCA6174_HW_3_0_VERSION 0x05020000
#define QCA6174_HW_3_2_VERSION 0x05030000
+/* QCA9377 target BMI version signatures */
+#define QCA9377_HW_1_0_DEV_VERSION 0x05020000
#define QCA9377_HW_1_1_DEV_VERSION 0x05020001
enum qca6174_pci_rev {
@@ -69,6 +71,7 @@ enum qca6174_chip_id_rev {
};
enum qca9377_chip_id_rev {
+ QCA9377_HW_1_0_CHIP_ID_REV = 0x0,
QCA9377_HW_1_1_CHIP_ID_REV = 0x1,
};
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 0be43b80a9a4..6c46814012ef 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -86,6 +86,8 @@ static const struct ath10k_pci_supp_chip ath10k_pci_supp_chips[] = {
{ QCA6174_2_1_DEVICE_ID, QCA6174_HW_3_2_CHIP_ID_REV },
{ QCA99X0_2_0_DEVICE_ID, QCA99X0_HW_2_0_CHIP_ID_REV },
+
+ { QCA9377_1_0_DEVICE_ID, QCA9377_HW_1_0_CHIP_ID_REV },
{ QCA9377_1_0_DEVICE_ID, QCA9377_HW_1_1_CHIP_ID_REV },
};
--
2.1.2