2015-12-03 17:53:24

by Peter Oh

Subject: [PATCH] ath10k: allow Mesh Point to install peer security key

Mesh Point requires peer security key install when running
in secured mode since it's a type of peer links, otherwise peer
link will be removed due to key install failure.

MFP feature set is required to run Mesh in secured mode and
QCA988X firmware, 10.2.4.70.14-2 and above, is the only one
supporting secured Mesh at this moment.

Signed-off-by: Peter Oh <[email protected]>
---
drivers/net/wireless/ath/ath10k/mac.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index bcb364d..b4bdeb0 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -250,7 +250,8 @@ static int ath10k_install_peer_wep_keys(struct ath10k_vif *arvif,
lockdep_assert_held(&ar->conf_mutex);

if (WARN_ON(arvif->vif->type != NL80211_IFTYPE_AP &&
- arvif->vif->type != NL80211_IFTYPE_ADHOC))
+ arvif->vif->type != NL80211_IFTYPE_ADHOC &&
+ arvif->vif->type != NL80211_IFTYPE_MESH_POINT))
return -EINVAL;

spin_lock_bh(&ar->data_lock);
--
1.9.1

2015-12-14 11:20:28

by Kalle Valo

Subject: Re: [PATCH] ath10k: allow Mesh Point to install peer security key

Peter Oh <[email protected]> writes:

> Mesh Point requires peer security key install when running
> in secured mode since it's a type of peer links, otherwise peer
> link will be removed due to key install failure.
>
> MFP feature set is required to run Mesh in secured mode and
> QCA988X firmware, 10.2.4.70.14-2 and above, is the only one
> supporting secured Mesh at this moment.
>
> Signed-off-by: Peter Oh <[email protected]>

Applied, thanks.

--
Kalle Valo