From: "Vittorio Gambaletta (VittGam)" <[email protected]>
This patch has been added to the 4.1 stable tree. If you have any
objections, please let us know.
===============
[ Upstream commit cd84042ce9040ad038e958bc67a46fcfc015c736 ]
The LED can be active high instead of active low on some hardware.
Add the led_active_high module parameter. It defaults to -1 to obey
platform data as before.
Setting the parameter to 1 or 0 will force the LED respectively
active high or active low.
Cc: <[email protected]>
Cc: <[email protected]>
Cc: <[email protected]>
Cc: <[email protected]>
Signed-off-by: Vittorio Gambaletta <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath9k/init.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 46a389c..b7b0254 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -49,6 +49,10 @@ int ath9k_led_blink;
module_param_named(blink, ath9k_led_blink, int, 0444);
MODULE_PARM_DESC(blink, "Enable LED blink on activity");
+static int ath9k_led_active_high = -1;
+module_param_named(led_active_high, ath9k_led_active_high, int, 0444);
+MODULE_PARM_DESC(led_active_high, "Invert LED polarity");
+
static int ath9k_btcoex_enable;
module_param_named(btcoex_enable, ath9k_btcoex_enable, int, 0444);
MODULE_PARM_DESC(btcoex_enable, "Enable wifi-BT coexistence");
@@ -600,6 +604,9 @@ static int ath9k_init_softc(u16 devid, struct ath_softc *sc,
if (ret)
return ret;
+ if (ath9k_led_active_high != -1)
+ ah->config.led_active_high = ath9k_led_active_high == 1;
+
/*
* Enable WLAN/BT RX Antenna diversity only when:
*
--
2.5.0