2016-11-14 13:24:51

by Michal Kazior

Subject: [PATCH] ath10k: add spectral scan support to wmi-tlv

Command structure and event flow doesn't seem to
be any different compared to existing
implementation for other firmware branches.

This patch effectively adds in-driver support for
spectral scanning on QCA61x4 and QCA9377.

Tested QCA9377 w/ WLAN.TF.1.0-00267-1.

Signed-off-by: Michal Kazior <[email protected]>
---
drivers/net/wireless/ath/ath10k/wmi-tlv.c | 72 +++++++++++++++++++++++++++++++
1 file changed, 72 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index e64f59300a7c..7f9b1185b549 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -3136,6 +3136,76 @@ ath10k_wmi_tlv_op_gen_echo(struct ath10k *ar, u32 value)
return skb;
}

+static struct sk_buff *
+ath10k_wmi_tlv_op_gen_vdev_spectral_conf(struct ath10k *ar,
+ const struct wmi_vdev_spectral_conf_arg *arg)
+{
+ struct wmi_vdev_spectral_conf_cmd *cmd;
+ struct sk_buff *skb;
+ struct wmi_tlv *tlv;
+ void *ptr;
+ size_t len;
+
+ len = sizeof(*tlv) + sizeof(*cmd);
+ skb = ath10k_wmi_alloc_skb(ar, len);
+ if (!skb)
+ return ERR_PTR(-ENOMEM);
+
+ ptr = (void *)skb->data;
+ tlv = ptr;
+ tlv->tag = __cpu_to_le16(WMI_TLV_TAG_STRUCT_VDEV_SPECTRAL_CONFIGURE_CMD);
+ tlv->len = __cpu_to_le16(sizeof(*cmd));
+ cmd = (void *)tlv->value;
+ cmd->vdev_id = __cpu_to_le32(arg->vdev_id);
+ cmd->scan_count = __cpu_to_le32(arg->scan_count);
+ cmd->scan_period = __cpu_to_le32(arg->scan_period);
+ cmd->scan_priority = __cpu_to_le32(arg->scan_priority);
+ cmd->scan_fft_size = __cpu_to_le32(arg->scan_fft_size);
+ cmd->scan_gc_ena = __cpu_to_le32(arg->scan_gc_ena);
+ cmd->scan_restart_ena = __cpu_to_le32(arg->scan_restart_ena);
+ cmd->scan_noise_floor_ref = __cpu_to_le32(arg->scan_noise_floor_ref);
+ cmd->scan_init_delay = __cpu_to_le32(arg->scan_init_delay);
+ cmd->scan_nb_tone_thr = __cpu_to_le32(arg->scan_nb_tone_thr);
+ cmd->scan_str_bin_thr = __cpu_to_le32(arg->scan_str_bin_thr);
+ cmd->scan_wb_rpt_mode = __cpu_to_le32(arg->scan_wb_rpt_mode);
+ cmd->scan_rssi_rpt_mode = __cpu_to_le32(arg->scan_rssi_rpt_mode);
+ cmd->scan_rssi_thr = __cpu_to_le32(arg->scan_rssi_thr);
+ cmd->scan_pwr_format = __cpu_to_le32(arg->scan_pwr_format);
+ cmd->scan_rpt_mode = __cpu_to_le32(arg->scan_rpt_mode);
+ cmd->scan_bin_scale = __cpu_to_le32(arg->scan_bin_scale);
+ cmd->scan_dbm_adj = __cpu_to_le32(arg->scan_dbm_adj);
+ cmd->scan_chn_mask = __cpu_to_le32(arg->scan_chn_mask);
+
+ return skb;
+}
+
+static struct sk_buff *
+ath10k_wmi_tlv_op_gen_vdev_spectral_enable(struct ath10k *ar, u32 vdev_id,
+ u32 trigger, u32 enable)
+{
+ struct wmi_vdev_spectral_enable_cmd *cmd;
+ struct sk_buff *skb;
+ struct wmi_tlv *tlv;
+ void *ptr;
+ size_t len;
+
+ len = sizeof(*tlv) + sizeof(*cmd);
+ skb = ath10k_wmi_alloc_skb(ar, len);
+ if (!skb)
+ return ERR_PTR(-ENOMEM);
+
+ ptr = (void *)skb->data;
+ tlv = ptr;
+ tlv->tag = __cpu_to_le16(WMI_TLV_TAG_STRUCT_VDEV_SPECTRAL_ENABLE_CMD);
+ tlv->len = __cpu_to_le16(sizeof(*cmd));
+ cmd = (void *)tlv->value;
+ cmd->vdev_id = __cpu_to_le32(vdev_id);
+ cmd->trigger_cmd = __cpu_to_le32(trigger);
+ cmd->enable_cmd = __cpu_to_le32(enable);
+
+ return skb;
+}
+
/****************/
/* TLV mappings */
/****************/
@@ -3542,6 +3612,8 @@ static const struct wmi_ops wmi_tlv_ops = {
.fw_stats_fill = ath10k_wmi_main_op_fw_stats_fill,
.get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype,
.gen_echo = ath10k_wmi_tlv_op_gen_echo,
+ .gen_vdev_spectral_conf = ath10k_wmi_tlv_op_gen_vdev_spectral_conf,
+ .gen_vdev_spectral_enable = ath10k_wmi_tlv_op_gen_vdev_spectral_enable,
};

static const struct wmi_peer_flags_map wmi_tlv_peer_flags_map = {
--
2.1.4

2016-11-23 13:57:17

by Kalle Valo

Subject: Re: ath10k: add spectral scan support to wmi-tlv

Michal Kazior <[email protected]> wrote:
> Command structure and event flow doesn't seem to
> be any different compared to existing
> implementation for other firmware branches.
>
> This patch effectively adds in-driver support for
> spectral scanning on QCA61x4 and QCA9377.
>
> Tested QCA9377 w/ WLAN.TF.1.0-00267-1.
>
> Signed-off-by: Michal Kazior <[email protected]>

Patch applied to ath-next branch of ath.git, thanks.

5a401f36ba30 ath10k: add spectral scan support to wmi-tlv

--
https://patchwork.kernel.org/patch/9427503/

Documentation about submitting wireless patches and checking status
from patchwork:

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches