After user_rmmod global flag removal, *_init_module() and
*_cleanup_module() have become just a wrapper functions.
We will get rid of them with the help of module_*_driver() macros.
For pcie, existing ".init_if" handler has same name as what
module_pcie_driver() macro will create. Let's rename it to
avoid conflict.
Signed-off-by: Amitkumar Karwar <[email protected]>
---
drivers/net/wireless/marvell/mwifiex/pcie.c | 47 ++++-------------------------
drivers/net/wireless/marvell/mwifiex/sdio.c | 29 +-----------------
drivers/net/wireless/marvell/mwifiex/usb.c | 35 +--------------------
3 files changed, 8 insertions(+), 103 deletions(-)
diff --git a/drivers/net/wireless/marvell/mwifiex/pcie.c b/drivers/net/wireless/marvell/mwifiex/pcie.c
index 079bb09..462f014 100644
--- a/drivers/net/wireless/marvell/mwifiex/pcie.c
+++ b/drivers/net/wireless/marvell/mwifiex/pcie.c
@@ -2754,7 +2754,7 @@ static void mwifiex_pcie_device_dump(struct mwifiex_adapter *adapter)
* - Allocate command response ring buffer
* - Allocate sleep cookie buffer
*/
-static int mwifiex_pcie_init(struct mwifiex_adapter *adapter)
+static int mwifiex_init_pcie(struct mwifiex_adapter *adapter)
{
struct pcie_service_card *card = adapter->card;
int ret;
@@ -2863,7 +2863,7 @@ static int mwifiex_pcie_init(struct mwifiex_adapter *adapter)
* - Command response ring buffer
* - Sleep cookie buffer
*/
-static void mwifiex_pcie_cleanup(struct mwifiex_adapter *adapter)
+static void mwifiex_cleanup_pcie(struct mwifiex_adapter *adapter)
{
struct pcie_service_card *card = adapter->card;
struct pci_dev *pdev = card->dev;
@@ -3063,7 +3063,7 @@ static void mwifiex_unregister_dev(struct mwifiex_adapter *adapter)
* - Allocate event BD ring buffers
* - Allocate command response ring buffer
* - Allocate sleep cookie buffer
- * Part of mwifiex_pcie_init(), not reset the PCIE registers
+ * Part of mwifiex_init_pcie(), not reset the PCIE registers
*/
static void mwifiex_pcie_up_dev(struct mwifiex_adapter *adapter)
{
@@ -3146,8 +3146,8 @@ static void mwifiex_pcie_down_dev(struct mwifiex_adapter *adapter)
}
static struct mwifiex_if_ops pcie_ops = {
- .init_if = mwifiex_pcie_init,
- .cleanup_if = mwifiex_pcie_cleanup,
+ .init_if = mwifiex_init_pcie,
+ .cleanup_if = mwifiex_cleanup_pcie,
.check_fw_status = mwifiex_check_fw_status,
.check_winner_status = mwifiex_check_winner_status,
.prog_fw = mwifiex_prog_fw_w_helper,
@@ -3173,42 +3173,7 @@ static void mwifiex_pcie_down_dev(struct mwifiex_adapter *adapter)
.up_dev = mwifiex_pcie_up_dev,
};
-/*
- * This function initializes the PCIE driver module.
- *
- * This registers the device with PCIE bus.
- */
-static int mwifiex_pcie_init_module(void)
-{
- int ret;
-
- pr_debug("Marvell PCIe Driver\n");
-
- ret = pci_register_driver(&mwifiex_pcie);
- if (ret)
- pr_err("Driver register failed!\n");
- else
- pr_debug("info: Driver registered successfully!\n");
-
- return ret;
-}
-
-/*
- * This function cleans up the PCIE driver.
- *
- * The following major steps are followed for cleanup -
- * - Resume the device if its suspended
- * - Disconnect the device if connected
- * - Shutdown the firmware
- * - Unregister the device from PCIE bus.
- */
-static void mwifiex_pcie_cleanup_module(void)
-{
- pci_unregister_driver(&mwifiex_pcie);
-}
-
-module_init(mwifiex_pcie_init_module);
-module_exit(mwifiex_pcie_cleanup_module);
+module_pci_driver(mwifiex_pcie);
MODULE_AUTHOR("Marvell International Ltd.");
MODULE_DESCRIPTION("Marvell WiFi-Ex PCI-Express Driver version " PCIE_VERSION);
diff --git a/drivers/net/wireless/marvell/mwifiex/sdio.c b/drivers/net/wireless/marvell/mwifiex/sdio.c
index 9a16e61..db01794 100644
--- a/drivers/net/wireless/marvell/mwifiex/sdio.c
+++ b/drivers/net/wireless/marvell/mwifiex/sdio.c
@@ -2698,34 +2698,7 @@ static void mwifiex_sdio_device_dump(struct mwifiex_adapter *adapter)
.deaggr_pkt = mwifiex_deaggr_sdio_pkt,
};
-/*
- * This function initializes the SDIO driver.
- *
- * This registers the device with SDIO bus.
- */
-static int
-mwifiex_sdio_init_module(void)
-{
- return sdio_register_driver(&mwifiex_sdio);
-}
-
-/*
- * This function cleans up the SDIO driver.
- *
- * The following major steps are followed for cleanup -
- * - Resume the device if its suspended
- * - Disconnect the device if connected
- * - Shutdown the firmware
- * - Unregister the device from SDIO bus.
- */
-static void
-mwifiex_sdio_cleanup_module(void)
-{
- sdio_unregister_driver(&mwifiex_sdio);
-}
-
-module_init(mwifiex_sdio_init_module);
-module_exit(mwifiex_sdio_cleanup_module);
+module_driver(mwifiex_sdio, sdio_register_driver, sdio_unregister_driver);
MODULE_AUTHOR("Marvell International Ltd.");
MODULE_DESCRIPTION("Marvell WiFi-Ex SDIO Driver version " SDIO_VERSION);
diff --git a/drivers/net/wireless/marvell/mwifiex/usb.c b/drivers/net/wireless/marvell/mwifiex/usb.c
index 53881c4..9cf3334 100644
--- a/drivers/net/wireless/marvell/mwifiex/usb.c
+++ b/drivers/net/wireless/marvell/mwifiex/usb.c
@@ -1200,40 +1200,7 @@ static void mwifiex_usb_submit_rem_rx_urbs(struct mwifiex_adapter *adapter)
.is_port_ready = mwifiex_usb_is_port_ready,
};
-/* This function initializes the USB driver module.
- *
- * This registers the device with USB bus.
- */
-static int mwifiex_usb_init_module(void)
-{
- int ret;
-
- pr_debug("Marvell USB8797 Driver\n");
-
- ret = usb_register(&mwifiex_usb_driver);
- if (ret)
- pr_err("Driver register failed!\n");
- else
- pr_debug("info: Driver registered successfully!\n");
-
- return ret;
-}
-
-/* This function cleans up the USB driver.
- *
- * The following major steps are followed in .disconnect for cleanup:
- * - Resume the device if its suspended
- * - Disconnect the device if connected
- * - Shutdown the firmware
- * - Unregister the device from USB bus.
- */
-static void mwifiex_usb_cleanup_module(void)
-{
- usb_deregister(&mwifiex_usb_driver);
-}
-
-module_init(mwifiex_usb_init_module);
-module_exit(mwifiex_usb_cleanup_module);
+module_usb_driver(mwifiex_usb_driver);
MODULE_AUTHOR("Marvell International Ltd.");
MODULE_DESCRIPTION("Marvell WiFi-Ex USB Driver version" USB_VERSION);
--
1.9.1
Amitkumar Karwar <[email protected]> wrote:
> After user_rmmod global flag removal, *_init_module() and
> *_cleanup_module() have become just a wrapper functions.
> We will get rid of them with the help of module_*_driver() macros.
>
> For pcie, existing ".init_if" handler has same name as what
> module_pcie_driver() macro will create. Let's rename it to
> avoid conflict.
>
> Signed-off-by: Amitkumar Karwar <[email protected]>
Doesn't apply.
fatal: sha1 information is lacking or useless (drivers/net/wireless/marvell/mwifiex/pcie.c).
Applying: mwifiex: use module_*_driver helper macros
Repository lacks necessary blobs to fall back on 3-way merge.
Cannot fall back to three-way merge.
Patch failed at 0001 mwifiex: use module_*_driver helper macros
Patch set to Changes Requested.
--
https://patchwork.kernel.org/patch/9456135/
Documentation about submitting wireless patches and checking status
from patchwork:
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
Amitkumar Karwar <[email protected]> wrote:
> After user_rmmod global flag removal, *_init_module() and
> *_cleanup_module() have become just a wrapper functions.
> We will get rid of them with the help of module_*_driver() macros.
>
> For pcie, existing ".init_if" handler has same name as what
> module_pcie_driver() macro will create. Let's rename it to
> avoid conflict.
>
> Signed-off-by: Amitkumar Karwar <[email protected]>
Patch applied to wireless-drivers-next.git, thanks.
c0e6aa426823 mwifiex: use module_*_driver helper macros
--
https://patchwork.kernel.org/patch/9456135/
Documentation about submitting wireless patches and checking status
from patchwork:
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches