QCA9377 firmware shall alloc 4 IRAM banks
Signed-off-by: Bartosz Markowski <[email protected]>
---
drivers/net/wireless/ath/ath10k/pci.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 0457e315d336..983f65bbb7fb 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -1973,7 +1973,7 @@ static int ath10k_pci_get_num_banks(struct ath10k *ar)
}
break;
case QCA9377_1_0_DEVICE_ID:
- return 2;
+ return 4;
}
ath10k_warn(ar, "unknown number of banks, assuming 1\n");
--
2.1.2
Align it with the cts protection call.
Signed-off-by: Bartosz Markowski <[email protected]>
---
drivers/net/wireless/ath/ath10k/mac.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 6f1825964177..508366f139f1 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -1275,6 +1275,9 @@ static int ath10k_recalc_rtscts_prot(struct ath10k_vif *arvif)
rts_cts |= SM(WMI_RTSCTS_FOR_SECOND_RATESERIES,
WMI_RTSCTS_PROFILE);
+ ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %d recalc rts/cts prot %d\n",
+ arvif->vdev_id, rts_cts);
+
return ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
rts_cts);
}
--
2.1.2
Bartosz Markowski <[email protected]> wrote:
> QCA9377 firmware shall alloc 4 IRAM banks
>
> Signed-off-by: Bartosz Markowski <[email protected]>
5 patches applied to ath-next branch of ath.git, thanks.
77cf13ad5731 ath10k: fix IRAM banks number for QCA9377
b08b5b53a1ed ath10k: override CE5 config for QCA9377
35bac90abf5e ath10k: decrease num of peers support
7cfe0455ee12 ath10k: set CTS protection VDEV param only if VDEV is up
861769017404 ath10k: add debug trace to rts/cts set function
--
https://patchwork.kernel.org/patch/9464915/
Documentation about submitting wireless patches and checking status
from patchwork:
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
The cts protection vdev parameter, in new QCA9377 TF2.0 firmware,
requires bss peer to be created for the STATION vdev type.
bss peer is being allocated by the firmware after vdev_start/_up commands.
mac80211 may call the cts protection setup at any time, so the
we needs to track the situation and defer the cts configuration
to prevent firmware asserts, like below:
[00]: 0x05020001 0x000015B3 0x0099ACE2 0x00955B31
[04]: 0x0099ACE2 0x00060730 0x00000004 0x00000000
[08]: 0x0044C754 0x00412C10 0x00000000 0x00409C54
[12]: 0x00000009 0x00000000 0x00952F6C 0x00952F77
[16]: 0x00952CC4 0x00910712 0x00000000 0x00000000
[20]: 0x4099ACE2 0x0040E858 0x00421254 0x004127F4
[24]: 0x8099B9B2 0x0040E8B8 0x00000000 0xC099ACE2
[28]: 0x800B75CB 0x0040E8F8 0x00000007 0x00005008
[32]: 0x809B048A 0x0040E958 0x00000010 0x00433B10
[36]: 0x809AFBBC 0x0040E9A8 0x0042BB74 0x0042BBBC
[40]: 0x8091D252 0x0040E9C8 0x0042BBBC 0x00000001
[44]: 0x809FFA45 0x0040EA78 0x0043D3E4 0x0042C2C8
[48]: 0x809FCEF4 0x0040EA98 0x0043D3E4 0x00000001
[52]: 0x80911210 0x0040EAE8 0x00000010 0x004041D0
[56]: 0x80911154 0x0040EB28 0x00400000 0x00000000
Signed-off-by: Bartosz Markowski <[email protected]>
---
drivers/net/wireless/ath/ath10k/mac.c | 51 +++++++++++++++++++++++++++++------
1 file changed, 43 insertions(+), 8 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index d06a12d548fd..6f1825964177 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -1227,6 +1227,36 @@ static int ath10k_monitor_recalc(struct ath10k *ar)
return ath10k_monitor_stop(ar);
}
+static bool ath10k_mac_can_set_cts_prot(struct ath10k_vif *arvif)
+{
+ struct ath10k *ar = arvif->ar;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ if (!arvif->is_started) {
+ ath10k_dbg(ar, ATH10K_DBG_MAC, "defer cts setup, vdev is not ready yet\n");
+ return false;
+ }
+
+ return true;
+}
+
+static int ath10k_mac_set_cts_prot(struct ath10k_vif *arvif)
+{
+ struct ath10k *ar = arvif->ar;
+ u32 vdev_param;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ vdev_param = ar->wmi.vdev_param->protection_mode;
+
+ ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %d cts_protection %d\n",
+ arvif->vdev_id, arvif->use_cts_prot);
+
+ return ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
+ arvif->use_cts_prot ? 1 : 0);
+}
+
static int ath10k_recalc_rtscts_prot(struct ath10k_vif *arvif)
{
struct ath10k *ar = arvif->ar;
@@ -5329,20 +5359,18 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
if (changed & BSS_CHANGED_ERP_CTS_PROT) {
arvif->use_cts_prot = info->use_cts_prot;
- ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %d cts_prot %d\n",
- arvif->vdev_id, info->use_cts_prot);
ret = ath10k_recalc_rtscts_prot(arvif);
if (ret)
ath10k_warn(ar, "failed to recalculate rts/cts prot for vdev %d: %d\n",
arvif->vdev_id, ret);
- vdev_param = ar->wmi.vdev_param->protection_mode;
- ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
- info->use_cts_prot ? 1 : 0);
- if (ret)
- ath10k_warn(ar, "failed to set protection mode %d on vdev %i: %d\n",
- info->use_cts_prot, arvif->vdev_id, ret);
+ if (ath10k_mac_can_set_cts_prot(arvif)) {
+ ret = ath10k_mac_set_cts_prot(arvif);
+ if (ret)
+ ath10k_warn(ar, "failed to set cts protection for vdev %d: %d\n",
+ arvif->vdev_id, ret);
+ }
}
if (changed & BSS_CHANGED_ERP_SLOT) {
@@ -7365,6 +7393,13 @@ ath10k_mac_op_assign_vif_chanctx(struct ieee80211_hw *hw,
arvif->is_up = true;
}
+ if (ath10k_mac_can_set_cts_prot(arvif)) {
+ ret = ath10k_mac_set_cts_prot(arvif);
+ if (ret)
+ ath10k_warn(ar, "failed to set cts protection for vdev %d: %d\n",
+ arvif->vdev_id, ret);
+ }
+
mutex_unlock(&ar->conf_mutex);
return 0;
--
2.1.2
The correct number for QCA9377 chip is 33 VDEVs.
This impacts also QCA6174 chip and it's max VDEV number.
Signed-off-by: Bartosz Markowski <[email protected]>
---
drivers/net/wireless/ath/ath10k/hw.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 883547f3347c..7feffec531cc 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -512,7 +512,7 @@ ath10k_rx_desc_get_l3_pad_bytes(struct ath10k_hw_params *hw,
/* Target specific defines for WMI-TLV firmware */
#define TARGET_TLV_NUM_VDEVS 4
#define TARGET_TLV_NUM_STATIONS 32
-#define TARGET_TLV_NUM_PEERS 35
+#define TARGET_TLV_NUM_PEERS 33
#define TARGET_TLV_NUM_TDLS_VDEVS 1
#define TARGET_TLV_NUM_TIDS ((TARGET_TLV_NUM_PEERS) * 2)
#define TARGET_TLV_NUM_MSDU_DESC (1024 + 32)
--
2.1.2
Similarly to QCA6174, QCA9377 requires the CE5 configuration to be
available for other feature. Use the ath10k_pci_override_ce_config()
for it as well.
This is required for TF2.0 firmware. Previous FW revisions were
working fine without this patch.
Fixes: a70587b3389a ("ath10k: configure copy engine 5 for HTT messages")
Signed-off-by: Bartosz Markowski <[email protected]>
---
drivers/net/wireless/ath/ath10k/pci.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 983f65bbb7fb..85367006a80a 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -3132,7 +3132,7 @@ int ath10k_pci_setup_resource(struct ath10k *ar)
setup_timer(&ar_pci->rx_post_retry, ath10k_pci_rx_replenish_retry,
(unsigned long)ar);
- if (QCA_REV_6174(ar))
+ if (QCA_REV_6174(ar) || QCA_REV_9377(ar))
ath10k_pci_override_ce_config(ar);
ret = ath10k_pci_alloc_pipes(ar);
--
2.1.2