Firmware has started making use of reserved field.
Accordingly change curr_pkt_filter from u16 to u32.
Signed-off-by: Amitkumar Karwar <[email protected]>
---
drivers/net/wireless/marvell/mwifiex/fw.h | 18 ++++++++----------
drivers/net/wireless/marvell/mwifiex/main.h | 2 +-
drivers/net/wireless/marvell/mwifiex/sta_cmd.c | 4 ++--
3 files changed, 11 insertions(+), 13 deletions(-)
diff --git a/drivers/net/wireless/marvell/mwifiex/fw.h b/drivers/net/wireless/marvell/mwifiex/fw.h
index ea45594..f48247c 100644
--- a/drivers/net/wireless/marvell/mwifiex/fw.h
+++ b/drivers/net/wireless/marvell/mwifiex/fw.h
@@ -434,14 +434,13 @@ enum mwifiex_channel_flags {
#define HostCmd_ACT_BITWISE_SET 0x0002
#define HostCmd_ACT_BITWISE_CLR 0x0003
#define HostCmd_RESULT_OK 0x0000
-
-#define HostCmd_ACT_MAC_RX_ON 0x0001
-#define HostCmd_ACT_MAC_TX_ON 0x0002
-#define HostCmd_ACT_MAC_WEP_ENABLE 0x0008
-#define HostCmd_ACT_MAC_ETHERNETII_ENABLE 0x0010
-#define HostCmd_ACT_MAC_PROMISCUOUS_ENABLE 0x0080
-#define HostCmd_ACT_MAC_ALL_MULTICAST_ENABLE 0x0100
-#define HostCmd_ACT_MAC_ADHOC_G_PROTECTION_ON 0x2000
+#define HostCmd_ACT_MAC_RX_ON BIT(0)
+#define HostCmd_ACT_MAC_TX_ON BIT(1)
+#define HostCmd_ACT_MAC_WEP_ENABLE BIT(3)
+#define HostCmd_ACT_MAC_ETHERNETII_ENABLE BIT(4)
+#define HostCmd_ACT_MAC_PROMISCUOUS_ENABLE BIT(7)
+#define HostCmd_ACT_MAC_ALL_MULTICAST_ENABLE BIT(8)
+#define HostCmd_ACT_MAC_ADHOC_G_PROTECTION_ON BIT(13)
#define HostCmd_BSS_MODE_IBSS 0x0002
#define HostCmd_BSS_MODE_ANY 0x0003
@@ -1084,8 +1083,7 @@ struct host_cmd_ds_802_11_mac_address {
};
struct host_cmd_ds_mac_control {
- __le16 action;
- __le16 reserved;
+ __le32 action;
};
struct host_cmd_ds_mac_multicast_adr {
diff --git a/drivers/net/wireless/marvell/mwifiex/main.h b/drivers/net/wireless/marvell/mwifiex/main.h
index 5f7a010..5c82972 100644
--- a/drivers/net/wireless/marvell/mwifiex/main.h
+++ b/drivers/net/wireless/marvell/mwifiex/main.h
@@ -529,7 +529,7 @@ struct mwifiex_private {
u8 tx_timeout_cnt;
struct net_device *netdev;
struct net_device_stats stats;
- u16 curr_pkt_filter;
+ u32 curr_pkt_filter;
u32 bss_mode;
u32 pkt_tx_ctrl;
u16 tx_power_level;
diff --git a/drivers/net/wireless/marvell/mwifiex/sta_cmd.c b/drivers/net/wireless/marvell/mwifiex/sta_cmd.c
index ad2dfd8..2f1f4d1 100644
--- a/drivers/net/wireless/marvell/mwifiex/sta_cmd.c
+++ b/drivers/net/wireless/marvell/mwifiex/sta_cmd.c
@@ -76,7 +76,7 @@
*/
static int mwifiex_cmd_mac_control(struct mwifiex_private *priv,
struct host_cmd_ds_command *cmd,
- u16 cmd_action, u16 *action)
+ u16 cmd_action, u32 *action)
{
struct host_cmd_ds_mac_control *mac_ctrl = &cmd->params.mac_ctrl;
@@ -89,7 +89,7 @@ static int mwifiex_cmd_mac_control(struct mwifiex_private *priv,
cmd->command = cpu_to_le16(HostCmd_CMD_MAC_CONTROL);
cmd->size =
cpu_to_le16(sizeof(struct host_cmd_ds_mac_control) + S_DS_GEN);
- mac_ctrl->action = cpu_to_le16(*action);
+ mac_ctrl->action = cpu_to_le32(*action);
return 0;
}
--
1.9.1
Enable dynamic bandwidth signalling by setting the corresponding
bit in MAC control register.
Signed-off-by: Amitkumar Karwar <[email protected]>
---
drivers/net/wireless/marvell/mwifiex/fw.h | 1 +
drivers/net/wireless/marvell/mwifiex/init.c | 3 ++-
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/marvell/mwifiex/fw.h b/drivers/net/wireless/marvell/mwifiex/fw.h
index f48247c..55db158f 100644
--- a/drivers/net/wireless/marvell/mwifiex/fw.h
+++ b/drivers/net/wireless/marvell/mwifiex/fw.h
@@ -441,6 +441,7 @@ enum mwifiex_channel_flags {
#define HostCmd_ACT_MAC_PROMISCUOUS_ENABLE BIT(7)
#define HostCmd_ACT_MAC_ALL_MULTICAST_ENABLE BIT(8)
#define HostCmd_ACT_MAC_ADHOC_G_PROTECTION_ON BIT(13)
+#define HostCmd_ACT_MAC_DYNAMIC_BW_ENABLE BIT(16)
#define HostCmd_BSS_MODE_IBSS 0x0002
#define HostCmd_BSS_MODE_ANY 0x0003
diff --git a/drivers/net/wireless/marvell/mwifiex/init.c b/drivers/net/wireless/marvell/mwifiex/init.c
index 87cda4f..7569483 100644
--- a/drivers/net/wireless/marvell/mwifiex/init.c
+++ b/drivers/net/wireless/marvell/mwifiex/init.c
@@ -92,7 +92,8 @@ int mwifiex_init_priv(struct mwifiex_private *priv)
for (i = 0; i < ARRAY_SIZE(priv->wep_key); i++)
memset(&priv->wep_key[i], 0, sizeof(struct mwifiex_wep_key));
priv->wep_key_curr_index = 0;
- priv->curr_pkt_filter = HostCmd_ACT_MAC_RX_ON | HostCmd_ACT_MAC_TX_ON |
+ priv->curr_pkt_filter = HostCmd_ACT_MAC_DYNAMIC_BW_ENABLE |
+ HostCmd_ACT_MAC_RX_ON | HostCmd_ACT_MAC_TX_ON |
HostCmd_ACT_MAC_ETHERNETII_ENABLE;
priv->beacon_period = 100; /* beacon interval */
--
1.9.1
Amitkumar Karwar <[email protected]> wrote:
> Firmware has started making use of reserved field.
> Accordingly change curr_pkt_filter from u16 to u32.
>
> Signed-off-by: Amitkumar Karwar <[email protected]>
2 patches applied to wireless-drivers-next.git, thanks.
b82dd3bdf1a1 mwifiex: change width of MAC control variable
d7864cf21235 mwifiex: Enable dynamic bandwidth signalling
--
https://patchwork.kernel.org/patch/9477347/
Documentation about submitting wireless patches and checking status
from patchwork:
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches