2017-05-15 11:46:04

by Maya Erez

[permalink] [raw]
Subject: [PATCH v2 0/5] wil6210 patches

This set of patches include the following:
- Fix for "low level RF sector API" patch
- Addtotional wil6210 fixes

Hamad Kadmany (2):
wil6210: add option to load FTM FW
wil6210: Improve AP stop handling

Lior David (1):
wil6210: low level RF sector API

Maya Erez (2):
wil6210: add option to ignore OTA regulatory hints
wil6210: support devices with different PCIe bar size

drivers/net/wireless/ath/wil6210/cfg80211.c | 585 ++++++++++++++++++++++++++++
drivers/net/wireless/ath/wil6210/ioctl.c | 4 +-
drivers/net/wireless/ath/wil6210/pcie_bus.c | 35 +-
drivers/net/wireless/ath/wil6210/wil6210.h | 13 +-
drivers/net/wireless/ath/wil6210/wmi.c | 4 +-
5 files changed, 622 insertions(+), 19 deletions(-)

--
1.9.1


2017-05-15 11:46:06

by Maya Erez

[permalink] [raw]
Subject: [PATCH v2 1/5] wil6210: low level RF sector API

From: Lior David <[email protected]>

Added vendor commands for low level control over
RF sectors. It allows user space a fine-grained control
over RF characteristics for TX and RX, such as direction
and gain of TX/RX. Main usages are debugging and diagnostics,
but also operational use cases.
API includes getting/setting a specific RF sector
configuration, as well as getting/setting the selected
sector which is used to communicate with a station.

Signed-off-by: Lior David <[email protected]>
Signed-off-by: Maya Erez <[email protected]>
---
drivers/net/wireless/ath/wil6210/cfg80211.c | 573 ++++++++++++++++++++++++++++
1 file changed, 573 insertions(+)

diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index fdaa99c..aa9ce30 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -16,6 +16,7 @@

#include <linux/etherdevice.h>
#include <linux/moduleparam.h>
+#include <net/netlink.h>
#include "wil6210.h"
#include "wmi.h"

@@ -41,6 +42,126 @@
/* channel 4 not supported yet */
};

+/* Vendor id to be used in vendor specific command and events
+ * to user space.
+ * NOTE: The authoritative place for definition of QCA_NL80211_VENDOR_ID,
+ * vendor subcmd definitions prefixed with QCA_NL80211_VENDOR_SUBCMD, and
+ * qca_wlan_vendor_attr is open source file src/common/qca-vendor.h in
+ * git://w1.fi/srv/git/hostap.git; the values here are just a copy of that
+ */
+
+#define QCA_NL80211_VENDOR_ID 0x001374
+
+#define WIL_MAX_RF_SECTORS (128)
+#define WIL_CID_ALL (0xff)
+
+enum qca_wlan_vendor_attr_rf_sector {
+ QCA_ATTR_MAC_ADDR = 6,
+ QCA_ATTR_PAD = 13,
+ QCA_ATTR_TSF = 29,
+ QCA_ATTR_DMG_RF_SECTOR_INDEX = 30,
+ QCA_ATTR_DMG_RF_SECTOR_TYPE = 31,
+ QCA_ATTR_DMG_RF_MODULE_MASK = 32,
+ QCA_ATTR_DMG_RF_SECTOR_CFG = 33,
+ QCA_ATTR_DMG_RF_SECTOR_MAX,
+};
+
+enum qca_wlan_vendor_attr_dmg_rf_sector_type {
+ QCA_ATTR_DMG_RF_SECTOR_TYPE_RX,
+ QCA_ATTR_DMG_RF_SECTOR_TYPE_TX,
+ QCA_ATTR_DMG_RF_SECTOR_TYPE_MAX
+};
+
+enum qca_wlan_vendor_attr_dmg_rf_sector_cfg {
+ QCA_ATTR_DMG_RF_SECTOR_CFG_INVALID = 0,
+ QCA_ATTR_DMG_RF_SECTOR_CFG_MODULE_INDEX,
+ QCA_ATTR_DMG_RF_SECTOR_CFG_ETYPE0,
+ QCA_ATTR_DMG_RF_SECTOR_CFG_ETYPE1,
+ QCA_ATTR_DMG_RF_SECTOR_CFG_ETYPE2,
+ QCA_ATTR_DMG_RF_SECTOR_CFG_PSH_HI,
+ QCA_ATTR_DMG_RF_SECTOR_CFG_PSH_LO,
+ QCA_ATTR_DMG_RF_SECTOR_CFG_DTYPE_X16,
+
+ /* keep last */
+ QCA_ATTR_DMG_RF_SECTOR_CFG_AFTER_LAST,
+ QCA_ATTR_DMG_RF_SECTOR_CFG_MAX =
+ QCA_ATTR_DMG_RF_SECTOR_CFG_AFTER_LAST - 1
+};
+
+static const struct
+nla_policy wil_rf_sector_policy[QCA_ATTR_DMG_RF_SECTOR_MAX + 1] = {
+ [QCA_ATTR_MAC_ADDR] = { .len = ETH_ALEN },
+ [QCA_ATTR_DMG_RF_SECTOR_INDEX] = { .type = NLA_U16 },
+ [QCA_ATTR_DMG_RF_SECTOR_TYPE] = { .type = NLA_U8 },
+ [QCA_ATTR_DMG_RF_MODULE_MASK] = { .type = NLA_U32 },
+ [QCA_ATTR_DMG_RF_SECTOR_CFG] = { .type = NLA_NESTED },
+};
+
+static const struct
+nla_policy wil_rf_sector_cfg_policy[QCA_ATTR_DMG_RF_SECTOR_CFG_MAX + 1] = {
+ [QCA_ATTR_DMG_RF_SECTOR_CFG_MODULE_INDEX] = { .type = NLA_U8 },
+ [QCA_ATTR_DMG_RF_SECTOR_CFG_ETYPE0] = { .type = NLA_U32 },
+ [QCA_ATTR_DMG_RF_SECTOR_CFG_ETYPE1] = { .type = NLA_U32 },
+ [QCA_ATTR_DMG_RF_SECTOR_CFG_ETYPE2] = { .type = NLA_U32 },
+ [QCA_ATTR_DMG_RF_SECTOR_CFG_PSH_HI] = { .type = NLA_U32 },
+ [QCA_ATTR_DMG_RF_SECTOR_CFG_PSH_LO] = { .type = NLA_U32 },
+ [QCA_ATTR_DMG_RF_SECTOR_CFG_DTYPE_X16] = { .type = NLA_U32 },
+};
+
+enum qca_nl80211_vendor_subcmds {
+ QCA_NL80211_VENDOR_SUBCMD_DMG_RF_GET_SECTOR_CFG = 139,
+ QCA_NL80211_VENDOR_SUBCMD_DMG_RF_SET_SECTOR_CFG = 140,
+ QCA_NL80211_VENDOR_SUBCMD_DMG_RF_GET_SELECTED_SECTOR = 141,
+ QCA_NL80211_VENDOR_SUBCMD_DMG_RF_SET_SELECTED_SECTOR = 142,
+};
+
+static int wil_rf_sector_get_cfg(struct wiphy *wiphy,
+ struct wireless_dev *wdev,
+ const void *data, int data_len);
+static int wil_rf_sector_set_cfg(struct wiphy *wiphy,
+ struct wireless_dev *wdev,
+ const void *data, int data_len);
+static int wil_rf_sector_get_selected(struct wiphy *wiphy,
+ struct wireless_dev *wdev,
+ const void *data, int data_len);
+static int wil_rf_sector_set_selected(struct wiphy *wiphy,
+ struct wireless_dev *wdev,
+ const void *data, int data_len);
+
+/* vendor specific commands */
+static const struct wiphy_vendor_command wil_nl80211_vendor_commands[] = {
+ {
+ .info.vendor_id = QCA_NL80211_VENDOR_ID,
+ .info.subcmd = QCA_NL80211_VENDOR_SUBCMD_DMG_RF_GET_SECTOR_CFG,
+ .flags = WIPHY_VENDOR_CMD_NEED_WDEV |
+ WIPHY_VENDOR_CMD_NEED_RUNNING,
+ .doit = wil_rf_sector_get_cfg
+ },
+ {
+ .info.vendor_id = QCA_NL80211_VENDOR_ID,
+ .info.subcmd = QCA_NL80211_VENDOR_SUBCMD_DMG_RF_SET_SECTOR_CFG,
+ .flags = WIPHY_VENDOR_CMD_NEED_WDEV |
+ WIPHY_VENDOR_CMD_NEED_RUNNING,
+ .doit = wil_rf_sector_set_cfg
+ },
+ {
+ .info.vendor_id = QCA_NL80211_VENDOR_ID,
+ .info.subcmd =
+ QCA_NL80211_VENDOR_SUBCMD_DMG_RF_GET_SELECTED_SECTOR,
+ .flags = WIPHY_VENDOR_CMD_NEED_WDEV |
+ WIPHY_VENDOR_CMD_NEED_RUNNING,
+ .doit = wil_rf_sector_get_selected
+ },
+ {
+ .info.vendor_id = QCA_NL80211_VENDOR_ID,
+ .info.subcmd =
+ QCA_NL80211_VENDOR_SUBCMD_DMG_RF_SET_SELECTED_SECTOR,
+ .flags = WIPHY_VENDOR_CMD_NEED_WDEV |
+ WIPHY_VENDOR_CMD_NEED_RUNNING,
+ .doit = wil_rf_sector_set_selected
+ },
+};
+
static struct ieee80211_supported_band wil_band_60ghz = {
.channels = wil_60ghz_channels,
.n_channels = ARRAY_SIZE(wil_60ghz_channels),
@@ -1637,6 +1758,9 @@ static void wil_wiphy_init(struct wiphy *wiphy)
wiphy->n_cipher_suites = ARRAY_SIZE(wil_cipher_suites);
wiphy->mgmt_stypes = wil_mgmt_stypes;
wiphy->features |= NL80211_FEATURE_SK_TX_STATUS;
+
+ wiphy->n_vendor_commands = ARRAY_SIZE(wil_nl80211_vendor_commands);
+ wiphy->vendor_commands = wil_nl80211_vendor_commands;
}

struct wireless_dev *wil_cfg80211_init(struct device *dev)
@@ -1695,3 +1819,452 @@ void wil_p2p_wdev_free(struct wil6210_priv *wil)
kfree(p2p_wdev);
}
}
+
+static int wil_rf_sector_status_to_rc(u8 status)
+{
+ switch (status) {
+ case WMI_RF_SECTOR_STATUS_SUCCESS:
+ return 0;
+ case WMI_RF_SECTOR_STATUS_BAD_PARAMETERS_ERROR:
+ return -EINVAL;
+ case WMI_RF_SECTOR_STATUS_BUSY_ERROR:
+ return -EAGAIN;
+ case WMI_RF_SECTOR_STATUS_NOT_SUPPORTED_ERROR:
+ return -EOPNOTSUPP;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int wil_rf_sector_get_cfg(struct wiphy *wiphy,
+ struct wireless_dev *wdev,
+ const void *data, int data_len)
+{
+ struct wil6210_priv *wil = wdev_to_wil(wdev);
+ int rc;
+ struct nlattr *tb[QCA_ATTR_DMG_RF_SECTOR_MAX + 1];
+ u16 sector_index;
+ u8 sector_type;
+ u32 rf_modules_vec;
+ struct wmi_get_rf_sector_params_cmd cmd;
+ struct {
+ struct wmi_cmd_hdr wmi;
+ struct wmi_get_rf_sector_params_done_event evt;
+ } __packed reply;
+ struct sk_buff *msg;
+ struct nlattr *nl_cfgs, *nl_cfg;
+ u32 i;
+ struct wmi_rf_sector_info *si;
+
+ if (!test_bit(WMI_FW_CAPABILITY_RF_SECTORS, wil->fw_capabilities))
+ return -EOPNOTSUPP;
+
+ rc = nla_parse(tb, QCA_ATTR_DMG_RF_SECTOR_MAX, data, data_len,
+ wil_rf_sector_policy, NULL);
+ if (rc) {
+ wil_err(wil, "Invalid rf sector ATTR\n");
+ return rc;
+ }
+
+ if (!tb[QCA_ATTR_DMG_RF_SECTOR_INDEX] ||
+ !tb[QCA_ATTR_DMG_RF_SECTOR_TYPE] ||
+ !tb[QCA_ATTR_DMG_RF_MODULE_MASK]) {
+ wil_err(wil, "Invalid rf sector spec\n");
+ return -EINVAL;
+ }
+
+ sector_index = nla_get_u16(
+ tb[QCA_ATTR_DMG_RF_SECTOR_INDEX]);
+ if (sector_index >= WIL_MAX_RF_SECTORS) {
+ wil_err(wil, "Invalid sector index %d\n", sector_index);
+ return -EINVAL;
+ }
+
+ sector_type = nla_get_u8(tb[QCA_ATTR_DMG_RF_SECTOR_TYPE]);
+ if (sector_type >= QCA_ATTR_DMG_RF_SECTOR_TYPE_MAX) {
+ wil_err(wil, "Invalid sector type %d\n", sector_type);
+ return -EINVAL;
+ }
+
+ rf_modules_vec = nla_get_u32(
+ tb[QCA_ATTR_DMG_RF_MODULE_MASK]);
+ if (rf_modules_vec >= BIT(WMI_MAX_RF_MODULES_NUM)) {
+ wil_err(wil, "Invalid rf module mask 0x%x\n", rf_modules_vec);
+ return -EINVAL;
+ }
+
+ cmd.sector_idx = cpu_to_le16(sector_index);
+ cmd.sector_type = sector_type;
+ cmd.rf_modules_vec = rf_modules_vec & 0xFF;
+ memset(&reply, 0, sizeof(reply));
+ rc = wmi_call(wil, WMI_GET_RF_SECTOR_PARAMS_CMDID, &cmd, sizeof(cmd),
+ WMI_GET_RF_SECTOR_PARAMS_DONE_EVENTID,
+ &reply, sizeof(reply),
+ 500);
+ if (rc)
+ return rc;
+ if (reply.evt.status) {
+ wil_err(wil, "get rf sector cfg failed with status %d\n",
+ reply.evt.status);
+ return wil_rf_sector_status_to_rc(reply.evt.status);
+ }
+
+ msg = cfg80211_vendor_cmd_alloc_reply_skb(
+ wiphy, 64 * WMI_MAX_RF_MODULES_NUM);
+ if (!msg)
+ return -ENOMEM;
+
+ if (nla_put_u64_64bit(msg, QCA_ATTR_TSF,
+ le64_to_cpu(reply.evt.tsf),
+ QCA_ATTR_PAD))
+ goto nla_put_failure;
+
+ nl_cfgs = nla_nest_start(msg, QCA_ATTR_DMG_RF_SECTOR_CFG);
+ if (!nl_cfgs)
+ goto nla_put_failure;
+ for (i = 0; i < WMI_MAX_RF_MODULES_NUM; i++) {
+ if (!(rf_modules_vec & BIT(i)))
+ continue;
+ nl_cfg = nla_nest_start(msg, i);
+ if (!nl_cfg)
+ goto nla_put_failure;
+ si = &reply.evt.sectors_info[i];
+ if (nla_put_u8(msg, QCA_ATTR_DMG_RF_SECTOR_CFG_MODULE_INDEX,
+ i) ||
+ nla_put_u32(msg, QCA_ATTR_DMG_RF_SECTOR_CFG_ETYPE0,
+ le32_to_cpu(si->etype0)) ||
+ nla_put_u32(msg, QCA_ATTR_DMG_RF_SECTOR_CFG_ETYPE1,
+ le32_to_cpu(si->etype1)) ||
+ nla_put_u32(msg, QCA_ATTR_DMG_RF_SECTOR_CFG_ETYPE2,
+ le32_to_cpu(si->etype2)) ||
+ nla_put_u32(msg, QCA_ATTR_DMG_RF_SECTOR_CFG_PSH_HI,
+ le32_to_cpu(si->psh_hi)) ||
+ nla_put_u32(msg, QCA_ATTR_DMG_RF_SECTOR_CFG_PSH_LO,
+ le32_to_cpu(si->psh_lo)) ||
+ nla_put_u32(msg, QCA_ATTR_DMG_RF_SECTOR_CFG_DTYPE_X16,
+ le32_to_cpu(si->dtype_swch_off)))
+ goto nla_put_failure;
+ nla_nest_end(msg, nl_cfg);
+ }
+
+ nla_nest_end(msg, nl_cfgs);
+ rc = cfg80211_vendor_cmd_reply(msg);
+ return rc;
+nla_put_failure:
+ kfree_skb(msg);
+ return -ENOBUFS;
+}
+
+static int wil_rf_sector_set_cfg(struct wiphy *wiphy,
+ struct wireless_dev *wdev,
+ const void *data, int data_len)
+{
+ struct wil6210_priv *wil = wdev_to_wil(wdev);
+ int rc, tmp;
+ struct nlattr *tb[QCA_ATTR_DMG_RF_SECTOR_MAX + 1];
+ struct nlattr *tb2[QCA_ATTR_DMG_RF_SECTOR_CFG_MAX + 1];
+ u16 sector_index, rf_module_index;
+ u8 sector_type;
+ u32 rf_modules_vec = 0;
+ struct wmi_set_rf_sector_params_cmd cmd;
+ struct {
+ struct wmi_cmd_hdr wmi;
+ struct wmi_set_rf_sector_params_done_event evt;
+ } __packed reply;
+ struct nlattr *nl_cfg;
+ struct wmi_rf_sector_info *si;
+
+ if (!test_bit(WMI_FW_CAPABILITY_RF_SECTORS, wil->fw_capabilities))
+ return -EOPNOTSUPP;
+
+ rc = nla_parse(tb, QCA_ATTR_DMG_RF_SECTOR_MAX, data, data_len,
+ wil_rf_sector_policy, NULL);
+ if (rc) {
+ wil_err(wil, "Invalid rf sector ATTR\n");
+ return rc;
+ }
+
+ if (!tb[QCA_ATTR_DMG_RF_SECTOR_INDEX] ||
+ !tb[QCA_ATTR_DMG_RF_SECTOR_TYPE] ||
+ !tb[QCA_ATTR_DMG_RF_SECTOR_CFG]) {
+ wil_err(wil, "Invalid rf sector spec\n");
+ return -EINVAL;
+ }
+
+ sector_index = nla_get_u16(
+ tb[QCA_ATTR_DMG_RF_SECTOR_INDEX]);
+ if (sector_index >= WIL_MAX_RF_SECTORS) {
+ wil_err(wil, "Invalid sector index %d\n", sector_index);
+ return -EINVAL;
+ }
+
+ sector_type = nla_get_u8(tb[QCA_ATTR_DMG_RF_SECTOR_TYPE]);
+ if (sector_type >= QCA_ATTR_DMG_RF_SECTOR_TYPE_MAX) {
+ wil_err(wil, "Invalid sector type %d\n", sector_type);
+ return -EINVAL;
+ }
+
+ memset(&cmd, 0, sizeof(cmd));
+
+ cmd.sector_idx = cpu_to_le16(sector_index);
+ cmd.sector_type = sector_type;
+ nla_for_each_nested(nl_cfg, tb[QCA_ATTR_DMG_RF_SECTOR_CFG],
+ tmp) {
+ rc = nla_parse_nested(tb2, QCA_ATTR_DMG_RF_SECTOR_CFG_MAX,
+ nl_cfg, wil_rf_sector_cfg_policy,
+ NULL);
+ if (rc) {
+ wil_err(wil, "invalid sector cfg\n");
+ return -EINVAL;
+ }
+
+ if (!tb2[QCA_ATTR_DMG_RF_SECTOR_CFG_MODULE_INDEX] ||
+ !tb2[QCA_ATTR_DMG_RF_SECTOR_CFG_ETYPE0] ||
+ !tb2[QCA_ATTR_DMG_RF_SECTOR_CFG_ETYPE1] ||
+ !tb2[QCA_ATTR_DMG_RF_SECTOR_CFG_ETYPE2] ||
+ !tb2[QCA_ATTR_DMG_RF_SECTOR_CFG_PSH_HI] ||
+ !tb2[QCA_ATTR_DMG_RF_SECTOR_CFG_PSH_LO] ||
+ !tb2[QCA_ATTR_DMG_RF_SECTOR_CFG_DTYPE_X16]) {
+ wil_err(wil, "missing cfg params\n");
+ return -EINVAL;
+ }
+
+ rf_module_index = nla_get_u8(
+ tb2[QCA_ATTR_DMG_RF_SECTOR_CFG_MODULE_INDEX]);
+ if (rf_module_index >= WMI_MAX_RF_MODULES_NUM) {
+ wil_err(wil, "invalid RF module index %d\n",
+ rf_module_index);
+ return -EINVAL;
+ }
+ rf_modules_vec |= BIT(rf_module_index);
+ si = &cmd.sectors_info[rf_module_index];
+ si->etype0 = cpu_to_le32(nla_get_u32(
+ tb2[QCA_ATTR_DMG_RF_SECTOR_CFG_ETYPE0]));
+ si->etype1 = cpu_to_le32(nla_get_u32(
+ tb2[QCA_ATTR_DMG_RF_SECTOR_CFG_ETYPE1]));
+ si->etype2 = cpu_to_le32(nla_get_u32(
+ tb2[QCA_ATTR_DMG_RF_SECTOR_CFG_ETYPE2]));
+ si->psh_hi = cpu_to_le32(nla_get_u32(
+ tb2[QCA_ATTR_DMG_RF_SECTOR_CFG_PSH_HI]));
+ si->psh_lo = cpu_to_le32(nla_get_u32(
+ tb2[QCA_ATTR_DMG_RF_SECTOR_CFG_PSH_LO]));
+ si->dtype_swch_off = cpu_to_le32(nla_get_u32(
+ tb2[QCA_ATTR_DMG_RF_SECTOR_CFG_DTYPE_X16]));
+ }
+
+ cmd.rf_modules_vec = rf_modules_vec & 0xFF;
+ memset(&reply, 0, sizeof(reply));
+ rc = wmi_call(wil, WMI_SET_RF_SECTOR_PARAMS_CMDID, &cmd, sizeof(cmd),
+ WMI_SET_RF_SECTOR_PARAMS_DONE_EVENTID,
+ &reply, sizeof(reply),
+ 500);
+ if (rc)
+ return rc;
+ return wil_rf_sector_status_to_rc(reply.evt.status);
+}
+
+static int wil_rf_sector_get_selected(struct wiphy *wiphy,
+ struct wireless_dev *wdev,
+ const void *data, int data_len)
+{
+ struct wil6210_priv *wil = wdev_to_wil(wdev);
+ int rc;
+ struct nlattr *tb[QCA_ATTR_DMG_RF_SECTOR_MAX + 1];
+ u8 sector_type, mac_addr[ETH_ALEN];
+ int cid = 0;
+ struct wmi_get_selected_rf_sector_index_cmd cmd;
+ struct {
+ struct wmi_cmd_hdr wmi;
+ struct wmi_get_selected_rf_sector_index_done_event evt;
+ } __packed reply;
+ struct sk_buff *msg;
+
+ if (!test_bit(WMI_FW_CAPABILITY_RF_SECTORS, wil->fw_capabilities))
+ return -EOPNOTSUPP;
+
+ rc = nla_parse(tb, QCA_ATTR_DMG_RF_SECTOR_MAX, data, data_len,
+ wil_rf_sector_policy, NULL);
+ if (rc) {
+ wil_err(wil, "Invalid rf sector ATTR\n");
+ return rc;
+ }
+
+ if (!tb[QCA_ATTR_DMG_RF_SECTOR_TYPE]) {
+ wil_err(wil, "Invalid rf sector spec\n");
+ return -EINVAL;
+ }
+ sector_type = nla_get_u8(tb[QCA_ATTR_DMG_RF_SECTOR_TYPE]);
+ if (sector_type >= QCA_ATTR_DMG_RF_SECTOR_TYPE_MAX) {
+ wil_err(wil, "Invalid sector type %d\n", sector_type);
+ return -EINVAL;
+ }
+
+ if (tb[QCA_ATTR_MAC_ADDR]) {
+ ether_addr_copy(mac_addr, nla_data(tb[QCA_ATTR_MAC_ADDR]));
+ cid = wil_find_cid(wil, mac_addr);
+ if (cid < 0) {
+ wil_err(wil, "invalid MAC address %pM\n", mac_addr);
+ return -ENOENT;
+ }
+ } else {
+ if (test_bit(wil_status_fwconnected, wil->status)) {
+ wil_err(wil, "must specify MAC address when connected\n");
+ return -EINVAL;
+ }
+ }
+
+ memset(&cmd, 0, sizeof(cmd));
+ cmd.cid = (u8)cid;
+ cmd.sector_type = sector_type;
+ memset(&reply, 0, sizeof(reply));
+ rc = wmi_call(wil, WMI_GET_SELECTED_RF_SECTOR_INDEX_CMDID,
+ &cmd, sizeof(cmd),
+ WMI_GET_SELECTED_RF_SECTOR_INDEX_DONE_EVENTID,
+ &reply, sizeof(reply),
+ 500);
+ if (rc)
+ return rc;
+ if (reply.evt.status) {
+ wil_err(wil, "get rf selected sector cfg failed with status %d\n",
+ reply.evt.status);
+ return wil_rf_sector_status_to_rc(reply.evt.status);
+ }
+
+ msg = cfg80211_vendor_cmd_alloc_reply_skb(
+ wiphy, 64 * WMI_MAX_RF_MODULES_NUM);
+ if (!msg)
+ return -ENOMEM;
+
+ if (nla_put_u64_64bit(msg, QCA_ATTR_TSF,
+ le64_to_cpu(reply.evt.tsf),
+ QCA_ATTR_PAD) ||
+ nla_put_u16(msg, QCA_ATTR_DMG_RF_SECTOR_INDEX,
+ le16_to_cpu(reply.evt.sector_idx)))
+ goto nla_put_failure;
+
+ rc = cfg80211_vendor_cmd_reply(msg);
+ return rc;
+nla_put_failure:
+ kfree_skb(msg);
+ return -ENOBUFS;
+}
+
+static int wil_rf_sector_wmi_set_selected(struct wil6210_priv *wil,
+ u16 sector_index,
+ u8 sector_type, u8 cid)
+{
+ struct wmi_set_selected_rf_sector_index_cmd cmd;
+ struct {
+ struct wmi_cmd_hdr wmi;
+ struct wmi_set_selected_rf_sector_index_done_event evt;
+ } __packed reply;
+ int rc;
+
+ memset(&cmd, 0, sizeof(cmd));
+ cmd.sector_idx = cpu_to_le16(sector_index);
+ cmd.sector_type = sector_type;
+ cmd.cid = (u8)cid;
+ memset(&reply, 0, sizeof(reply));
+ rc = wmi_call(wil, WMI_SET_SELECTED_RF_SECTOR_INDEX_CMDID,
+ &cmd, sizeof(cmd),
+ WMI_SET_SELECTED_RF_SECTOR_INDEX_DONE_EVENTID,
+ &reply, sizeof(reply),
+ 500);
+ if (rc)
+ return rc;
+ return wil_rf_sector_status_to_rc(reply.evt.status);
+}
+
+static int wil_rf_sector_set_selected(struct wiphy *wiphy,
+ struct wireless_dev *wdev,
+ const void *data, int data_len)
+{
+ struct wil6210_priv *wil = wdev_to_wil(wdev);
+ int rc;
+ struct nlattr *tb[QCA_ATTR_DMG_RF_SECTOR_MAX + 1];
+ u16 sector_index;
+ u8 sector_type, mac_addr[ETH_ALEN], i;
+ int cid = 0;
+
+ if (!test_bit(WMI_FW_CAPABILITY_RF_SECTORS, wil->fw_capabilities))
+ return -EOPNOTSUPP;
+
+ rc = nla_parse(tb, QCA_ATTR_DMG_RF_SECTOR_MAX, data, data_len,
+ wil_rf_sector_policy, NULL);
+ if (rc) {
+ wil_err(wil, "Invalid rf sector ATTR\n");
+ return rc;
+ }
+
+ if (!tb[QCA_ATTR_DMG_RF_SECTOR_INDEX] ||
+ !tb[QCA_ATTR_DMG_RF_SECTOR_TYPE]) {
+ wil_err(wil, "Invalid rf sector spec\n");
+ return -EINVAL;
+ }
+
+ sector_index = nla_get_u16(
+ tb[QCA_ATTR_DMG_RF_SECTOR_INDEX]);
+ if (sector_index >= WIL_MAX_RF_SECTORS &&
+ sector_index != WMI_INVALID_RF_SECTOR_INDEX) {
+ wil_err(wil, "Invalid sector index %d\n", sector_index);
+ return -EINVAL;
+ }
+
+ sector_type = nla_get_u8(tb[QCA_ATTR_DMG_RF_SECTOR_TYPE]);
+ if (sector_type >= QCA_ATTR_DMG_RF_SECTOR_TYPE_MAX) {
+ wil_err(wil, "Invalid sector type %d\n", sector_type);
+ return -EINVAL;
+ }
+
+ if (tb[QCA_ATTR_MAC_ADDR]) {
+ ether_addr_copy(mac_addr, nla_data(tb[QCA_ATTR_MAC_ADDR]));
+ if (!is_broadcast_ether_addr(mac_addr)) {
+ cid = wil_find_cid(wil, mac_addr);
+ if (cid < 0) {
+ wil_err(wil, "invalid MAC address %pM\n",
+ mac_addr);
+ return -ENOENT;
+ }
+ } else {
+ if (sector_index != WMI_INVALID_RF_SECTOR_INDEX) {
+ wil_err(wil, "broadcast MAC valid only with unlocking\n");
+ return -EINVAL;
+ }
+ cid = -1;
+ }
+ } else {
+ if (test_bit(wil_status_fwconnected, wil->status)) {
+ wil_err(wil, "must specify MAC address when connected\n");
+ return -EINVAL;
+ }
+ /* otherwise, using cid=0 for unassociated station */
+ }
+
+ if (cid >= 0) {
+ rc = wil_rf_sector_wmi_set_selected(wil, sector_index,
+ sector_type, cid);
+ } else {
+ /* unlock all cids */
+ rc = wil_rf_sector_wmi_set_selected(
+ wil, WMI_INVALID_RF_SECTOR_INDEX, sector_type,
+ WIL_CID_ALL);
+ if (rc == -EINVAL) {
+ for (i = 0; i < WIL6210_MAX_CID; i++) {
+ rc = wil_rf_sector_wmi_set_selected(
+ wil, WMI_INVALID_RF_SECTOR_INDEX,
+ sector_type, i);
+ /* the FW will silently ignore and return
+ * success for unused cid, so abort the loop
+ * on any other error
+ */
+ if (rc) {
+ wil_err(wil, "unlock cid %d failed with status %d\n",
+ i, rc);
+ break;
+ }
+ }
+ }
+ }
+
+ return rc;
+}
--
1.9.1

2017-05-15 11:46:07

by Maya Erez

[permalink] [raw]
Subject: [PATCH v2 2/5] wil6210: add option to load FTM FW

From: Hamad Kadmany <[email protected]>

Module parameter allows to load specific FW used
for FTM testing.

Signed-off-by: Hamad Kadmany <[email protected]>
Signed-off-by: Maya Erez <[email protected]>
---
drivers/net/wireless/ath/wil6210/pcie_bus.c | 18 +++++++++++++-----
drivers/net/wireless/ath/wil6210/wil6210.h | 9 +++++++--
2 files changed, 20 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/ath/wil6210/pcie_bus.c b/drivers/net/wireless/ath/wil6210/pcie_bus.c
index b38515f..33bd85c 100644
--- a/drivers/net/wireless/ath/wil6210/pcie_bus.c
+++ b/drivers/net/wireless/ath/wil6210/pcie_bus.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2012-2016 Qualcomm Atheros, Inc.
+ * Copyright (c) 2012-2017 Qualcomm Atheros, Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
@@ -26,6 +26,10 @@
module_param(use_msi, bool, 0444);
MODULE_PARM_DESC(use_msi, " Use MSI interrupt, default - true");

+static bool ftm_mode;
+module_param(ftm_mode, bool, 0444);
+MODULE_PARM_DESC(ftm_mode, " Set factory test mode, default - false");
+
#ifdef CONFIG_PM
#ifdef CONFIG_PM_SLEEP
static int wil6210_pm_notify(struct notifier_block *notify_block,
@@ -36,13 +40,15 @@ static int wil6210_pm_notify(struct notifier_block *notify_block,
static
void wil_set_capabilities(struct wil6210_priv *wil)
{
+ const char *wil_fw_name;
u32 jtag_id = wil_r(wil, RGF_USER_JTAG_DEV_ID);
u8 chip_revision = (wil_r(wil, RGF_USER_REVISION_ID) &
RGF_USER_REVISION_ID_MASK);

bitmap_zero(wil->hw_capabilities, hw_capability_last);
bitmap_zero(wil->fw_capabilities, WMI_FW_CAPABILITY_MAX);
- wil->wil_fw_name = WIL_FW_NAME_DEFAULT;
+ wil->wil_fw_name = ftm_mode ? WIL_FW_NAME_FTM_DEFAULT :
+ WIL_FW_NAME_DEFAULT;
wil->chip_revision = chip_revision;

switch (jtag_id) {
@@ -51,9 +57,11 @@ void wil_set_capabilities(struct wil6210_priv *wil)
case REVISION_ID_SPARROW_D0:
wil->hw_name = "Sparrow D0";
wil->hw_version = HW_VER_SPARROW_D0;
- if (wil_fw_verify_file_exists(wil,
- WIL_FW_NAME_SPARROW_PLUS))
- wil->wil_fw_name = WIL_FW_NAME_SPARROW_PLUS;
+ wil_fw_name = ftm_mode ? WIL_FW_NAME_FTM_SPARROW_PLUS :
+ WIL_FW_NAME_SPARROW_PLUS;
+
+ if (wil_fw_verify_file_exists(wil, wil_fw_name))
+ wil->wil_fw_name = wil_fw_name;
break;
case REVISION_ID_SPARROW_B0:
wil->hw_name = "Sparrow B0";
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index b00c803..fe942ba 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -37,8 +37,13 @@
extern bool disable_ap_sme;

#define WIL_NAME "wil6210"
-#define WIL_FW_NAME_DEFAULT "wil6210.fw" /* code Sparrow B0 */
-#define WIL_FW_NAME_SPARROW_PLUS "wil6210_sparrow_plus.fw" /* code Sparrow D0 */
+
+#define WIL_FW_NAME_DEFAULT "wil6210.fw"
+#define WIL_FW_NAME_FTM_DEFAULT "wil6210_ftm.fw"
+
+#define WIL_FW_NAME_SPARROW_PLUS "wil6210_sparrow_plus.fw"
+#define WIL_FW_NAME_FTM_SPARROW_PLUS "wil6210_sparrow_plus_ftm.fw"
+
#define WIL_BOARD_FILE_NAME "wil6210.brd" /* board & radio parameters */

#define WIL_DEFAULT_BUS_REQUEST_KBPS 128000 /* ~1Gbps */
--
1.9.1

2017-05-15 11:46:09

by Maya Erez

[permalink] [raw]
Subject: [PATCH v2 3/5] wil6210: Improve AP stop handling

From: Hamad Kadmany <[email protected]>

Set resetting flag early when stopping AP to avoid
disconnect events as a result of disconnect command
sent during AP stop procedure.

Signed-off-by: Hamad Kadmany <[email protected]>
Signed-off-by: Maya Erez <[email protected]>
---
drivers/net/wireless/ath/wil6210/cfg80211.c | 2 ++
1 file changed, 2 insertions(+)

diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index aa9ce30..567fe43 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -1446,6 +1446,8 @@ static int wil_cfg80211_stop_ap(struct wiphy *wiphy,
wil6210_bus_request(wil, WIL_DEFAULT_BUS_REQUEST_KBPS);
wil_set_recovery_state(wil, fw_recovery_idle);

+ set_bit(wil_status_resetting, wil->status);
+
mutex_lock(&wil->mutex);

wmi_pcp_stop(wil);
--
1.9.1

2017-05-15 11:46:14

by Maya Erez

[permalink] [raw]
Subject: [PATCH v2 5/5] wil6210: support devices with different PCIe bar size

wil6210 devices can have different PCIe bar size, hence get the
bar size from PCIe device instead of using a constant bar size.

Signed-off-by: Maya Erez <[email protected]>
---
drivers/net/wireless/ath/wil6210/ioctl.c | 4 ++--
drivers/net/wireless/ath/wil6210/pcie_bus.c | 17 ++++++++++-------
drivers/net/wireless/ath/wil6210/wil6210.h | 4 +++-
drivers/net/wireless/ath/wil6210/wmi.c | 4 ++--
4 files changed, 17 insertions(+), 12 deletions(-)

diff --git a/drivers/net/wireless/ath/wil6210/ioctl.c b/drivers/net/wireless/ath/wil6210/ioctl.c
index 6303800..1c49ad8 100644
--- a/drivers/net/wireless/ath/wil6210/ioctl.c
+++ b/drivers/net/wireless/ath/wil6210/ioctl.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2014 Qualcomm Atheros, Inc.
+ * Copyright (c) 2014,2017 Qualcomm Atheros, Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
@@ -46,7 +46,7 @@ static void __iomem *wil_ioc_addr(struct wil6210_priv *wil, uint32_t addr,
}

off = a - wil->csr;
- if (size >= WIL6210_MEM_SIZE - off) {
+ if (size >= wil->bar_size - off) {
wil_err(wil, "Requested block does not fit into memory: "
"off = 0x%08x size = 0x%08x\n", off, size);
return NULL;
diff --git a/drivers/net/wireless/ath/wil6210/pcie_bus.c b/drivers/net/wireless/ath/wil6210/pcie_bus.c
index 33bd85c..bf9f265 100644
--- a/drivers/net/wireless/ath/wil6210/pcie_bus.c
+++ b/drivers/net/wireless/ath/wil6210/pcie_bus.c
@@ -200,16 +200,18 @@ static int wil_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id)
.ramdump = wil_platform_rop_ramdump,
.fw_recovery = wil_platform_rop_fw_recovery,
};
+ u32 bar_size = pci_resource_len(pdev, 0);

/* check HW */
dev_info(&pdev->dev, WIL_NAME
- " device found [%04x:%04x] (rev %x)\n",
- (int)pdev->vendor, (int)pdev->device, (int)pdev->revision);
-
- if (pci_resource_len(pdev, 0) != WIL6210_MEM_SIZE) {
- dev_err(&pdev->dev, "Not " WIL_NAME "? "
- "BAR0 size is %lu while expecting %lu\n",
- (ulong)pci_resource_len(pdev, 0), WIL6210_MEM_SIZE);
+ " device found [%04x:%04x] (rev %x) bar size 0x%x\n",
+ (int)pdev->vendor, (int)pdev->device, (int)pdev->revision,
+ bar_size);
+
+ if ((bar_size < WIL6210_MIN_MEM_SIZE) ||
+ (bar_size > WIL6210_MAX_MEM_SIZE)) {
+ dev_err(&pdev->dev, "Unexpected BAR0 size 0x%x\n",
+ bar_size);
return -ENODEV;
}

@@ -222,6 +224,7 @@ static int wil_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id)

wil->pdev = pdev;
pci_set_drvdata(pdev, wil);
+ wil->bar_size = bar_size;
/* rollback to if_free */

wil->platform_handle =
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index fe942ba..ca532c7 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -58,7 +58,8 @@ static inline u32 WIL_GET_BITS(u32 x, int b0, int b1)
return (x >> b0) & ((1 << (b1 - b0 + 1)) - 1);
}

-#define WIL6210_MEM_SIZE (2*1024*1024UL)
+#define WIL6210_MIN_MEM_SIZE (2 * 1024 * 1024UL)
+#define WIL6210_MAX_MEM_SIZE (4 * 1024 * 1024UL)

#define WIL_TX_Q_LEN_DEFAULT (4000)
#define WIL_RX_RING_SIZE_ORDER_DEFAULT (10)
@@ -599,6 +600,7 @@ struct blink_on_off_time {

struct wil6210_priv {
struct pci_dev *pdev;
+ u32 bar_size;
struct wireless_dev *wdev;
void __iomem *csr;
DECLARE_BITMAP(status, wil_status_last);
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index 814c356..93902cb 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -157,7 +157,7 @@ void __iomem *wmi_buffer(struct wil6210_priv *wil, __le32 ptr_)
return NULL;

off = HOSTADDR(ptr);
- if (off > WIL6210_MEM_SIZE - 4)
+ if (off > wil->bar_size - 4)
return NULL;

return wil->csr + off;
@@ -177,7 +177,7 @@ void __iomem *wmi_addr(struct wil6210_priv *wil, u32 ptr)
return NULL;

off = HOSTADDR(ptr);
- if (off > WIL6210_MEM_SIZE - 4)
+ if (off > wil->bar_size - 4)
return NULL;

return wil->csr + off;
--
1.9.1

2017-05-23 15:31:11

by Kalle Valo

[permalink] [raw]
Subject: Re: [v2,1/5] wil6210: low level RF sector API

Maya Erez <[email protected]> wrote:
> From: Lior David <[email protected]>
>
> Added vendor commands for low level control over
> RF sectors. It allows user space a fine-grained control
> over RF characteristics for TX and RX, such as direction
> and gain of TX/RX. Main usages are debugging and diagnostics,
> but also operational use cases.
> API includes getting/setting a specific RF sector
> configuration, as well as getting/setting the selected
> sector which is used to communicate with a station.
>
> Signed-off-by: Lior David <[email protected]>
> Signed-off-by: Maya Erez <[email protected]>

4 patches applied to ath-next branch of ath.git, thanks.

0216a895946f wil6210: low level RF sector API
1c3964540425 wil6210: add option to load FTM FW
646d402d9f8f wil6210: Improve AP stop handling
d86d47164b22 wil6210: support devices with different PCIe bar size

--
https://patchwork.kernel.org/patch/9726747/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

2017-05-15 11:46:13

by Maya Erez

[permalink] [raw]
Subject: [PATCH v2 4/5] wil6210: add option to ignore OTA regulatory hints

On some platforms, the regulatory domain (country) is set
using mechanisms external to WIFI, such as cellular modem
and GPS. In these scenarios the regulatory hints that
are received over the air (in beacons and similar) can
conflict and even cause an incorrect country to be set.
Add an option to ignore the OTA regulatory hints to better
support such scenarios.

Signed-off-by: Lior David <[email protected]>
Signed-off-by: Maya Erez <[email protected]>
---
drivers/net/wireless/ath/wil6210/cfg80211.c | 10 ++++++++++
1 file changed, 10 insertions(+)

diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index 567fe43..0f297c0 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -26,6 +26,11 @@
module_param(disable_ap_sme, bool, 0444);
MODULE_PARM_DESC(disable_ap_sme, " let user space handle AP mode SME");

+static bool ignore_reg_hints;
+module_param(ignore_reg_hints, bool, 0444);
+MODULE_PARM_DESC(ignore_reg_hints,
+ " Ignore OTA regulatory hints (Default: false)");
+
#define CHAN60G(_channel, _flags) { \
.band = NL80211_BAND_60GHZ, \
.center_freq = 56160 + (2160 * (_channel)), \
@@ -1763,6 +1768,11 @@ static void wil_wiphy_init(struct wiphy *wiphy)

wiphy->n_vendor_commands = ARRAY_SIZE(wil_nl80211_vendor_commands);
wiphy->vendor_commands = wil_nl80211_vendor_commands;
+
+ if (ignore_reg_hints) {
+ wiphy->regulatory_flags |= REGULATORY_DISABLE_BEACON_HINTS;
+ wiphy->regulatory_flags |= REGULATORY_COUNTRY_IE_IGNORE;
+ }
}

struct wireless_dev *wil_cfg80211_init(struct device *dev)
--
1.9.1