2017-08-22 21:30:56

by Ryan Hsu

[permalink] [raw]
Subject: [PATCH v2 1/2] ath10k: add the PCI PM core suspend/resume ops

From: Ryan Hsu <[email protected]>

The actual PCI suspend/resume in ath10k has been handled in wow.c,
but in the case of the device doesn't support remote wakeup,
the .hif_suspend() and .hif_resume() will never be handled.

ath10k_wow_op_suspend()
{
if (WARN_ON(!test_bit(ATH10K_FW_FEATURE_WOWLAN_SUPPORT,
ar->running_fw->fw_file.fw_features))) {
ret = 1;
goto exit;
}

....

ret = ath10k_hif_suspend(ar);
}

So register the PCI PM core to support the suspend/resume if the device
doesn't support remote wakeup.

Signed-off-by: Ryan Hsu <[email protected]>
---
drivers/net/wireless/ath/ath10k/pci.c | 42 +++++++++++++++++++++++++++++++++++
1 file changed, 42 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 0457e31..4aac0de 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -3358,11 +3358,53 @@ static void ath10k_pci_remove(struct pci_dev *pdev)

MODULE_DEVICE_TABLE(pci, ath10k_pci_id_table);

+#ifdef CONFIG_PM
+
+static int ath10k_pci_pm_suspend(struct device *dev)
+{
+ struct ath10k *ar = dev_get_drvdata(dev);
+ int ret;
+
+ if (test_bit(ATH10K_FW_FEATURE_WOWLAN_SUPPORT,
+ ar->running_fw->fw_file.fw_features))
+ return 0;
+
+ ret = ath10k_hif_suspend(ar);
+ if (ret)
+ ath10k_warn(ar, "failed to suspend hif: %d\n", ret);
+
+ return ret;
+}
+
+static int ath10k_pci_pm_resume(struct device *dev)
+{
+ struct ath10k *ar = dev_get_drvdata(dev);
+ int ret;
+
+ if (test_bit(ATH10K_FW_FEATURE_WOWLAN_SUPPORT,
+ ar->running_fw->fw_file.fw_features))
+ return 0;
+
+ ret = ath10k_hif_resume(ar);
+ if (ret)
+ ath10k_warn(ar, "failed to resume hif: %d\n", ret);
+
+ return ret;
+}
+
+SIMPLE_DEV_PM_OPS(ath10k_pci_pm_ops,
+ ath10k_pci_pm_suspend,
+ ath10k_pci_pm_resume);
+#endif
+
static struct pci_driver ath10k_pci_driver = {
.name = "ath10k_pci",
.id_table = ath10k_pci_id_table,
.probe = ath10k_pci_probe,
.remove = ath10k_pci_remove,
+#ifdef CONFIG_PM
+ .driver.pm = &ath10k_pci_pm_ops,
+#endif
};

static int __init ath10k_pci_init(void)
--
1.9.1


2017-08-22 21:29:57

by Ryan Hsu

[permalink] [raw]
Subject: [PATCH v2 2/2] ath10k: Configure and enable the wakeup capability

From: Ryan Hsu <[email protected]>

ACPI will rely on device driver to tell it if the device could support
wakeup function when system in D3 state.

This has caused some platform can't support remote wakeup correctly,
because the ACPI wakeup GPE is not enabled, hence registers the .set_wakeup
callback to handle it if device supports wakeup.

Signed-off-by: Ryan Hsu <[email protected]>
---
drivers/net/wireless/ath/ath10k/mac.c | 1 +
drivers/net/wireless/ath/ath10k/wow.c | 14 ++++++++++++++
drivers/net/wireless/ath/ath10k/wow.h | 1 +
3 files changed, 16 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 2e5d2ca..bbf7da1 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -7488,6 +7488,7 @@ static const struct ieee80211_ops ath10k_ops = {
#ifdef CONFIG_PM
.suspend = ath10k_wow_op_suspend,
.resume = ath10k_wow_op_resume,
+ .set_wakeup = ath10k_wow_op_set_wakeup,
#endif
#ifdef CONFIG_MAC80211_DEBUGFS
.sta_add_debugfs = ath10k_sta_add_debugfs,
diff --git a/drivers/net/wireless/ath/ath10k/wow.c b/drivers/net/wireless/ath/ath10k/wow.c
index 77100d4..0d46d6d 100644
--- a/drivers/net/wireless/ath/ath10k/wow.c
+++ b/drivers/net/wireless/ath/ath10k/wow.c
@@ -277,6 +277,18 @@ exit:
return ret ? 1 : 0;
}

+void ath10k_wow_op_set_wakeup(struct ieee80211_hw *hw, bool enabled)
+{
+ struct ath10k *ar = hw->priv;
+
+ mutex_lock(&ar->conf_mutex);
+ if (test_bit(ATH10K_FW_FEATURE_WOWLAN_SUPPORT,
+ ar->running_fw->fw_file.fw_features)) {
+ device_set_wakeup_enable(ar->dev, enabled);
+ }
+ mutex_unlock(&ar->conf_mutex);
+}
+
int ath10k_wow_op_resume(struct ieee80211_hw *hw)
{
struct ath10k *ar = hw->priv;
@@ -336,5 +348,7 @@ int ath10k_wow_init(struct ath10k *ar)
ar->wow.wowlan_support.n_patterns = ar->wow.max_num_patterns;
ar->hw->wiphy->wowlan = &ar->wow.wowlan_support;

+ device_set_wakeup_capable(ar->dev, true);
+
return 0;
}
diff --git a/drivers/net/wireless/ath/ath10k/wow.h b/drivers/net/wireless/ath/ath10k/wow.h
index abbb04b..9745b9d 100644
--- a/drivers/net/wireless/ath/ath10k/wow.h
+++ b/drivers/net/wireless/ath/ath10k/wow.h
@@ -28,6 +28,7 @@ int ath10k_wow_init(struct ath10k *ar);
int ath10k_wow_op_suspend(struct ieee80211_hw *hw,
struct cfg80211_wowlan *wowlan);
int ath10k_wow_op_resume(struct ieee80211_hw *hw);
+void ath10k_wow_op_set_wakeup(struct ieee80211_hw *hw, bool enabled);

#else

--
1.9.1