Hi.
I have a little problem. I replaced the old BCM4312 card on my Dell mini 1011 (10v) with:
03:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01)
But it won't work.
First it crashed Linux:
http://pastebin.com/YmEGcPK8
Then I installed a system update:
http://funkyimg.com/u2/879/849/2.png
http://pastebin.com/hWG6u7VJ
And now it is:
[ ??30.589243] ath9k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ ??30.589269] ath9k 0000:03:00.0: setting latency timer to 64
[ ??30.594884] ath: address test failed addr: 0x00008000 - wr:0xaaaaaaaa != rd:0xaaaa2aaa
[ ??30.594898] ath: Unable to initialize hardware; initialization status: -19
[ ??30.594913] ath9k 0000:03:00.0: Failed to initialize device
[ ??30.594991] ath9k 0000:03:00.0: PCI INT A disabled
lsusb:
http://pastebin.com/JHYZiDhr
Installing the latest stable compat-wireless from source didn't help (bleeding edge won't build).
I would appreciate if you help me.
--
Best regards,
Misha Shnurapet, Fedora Project Contributor
Email: shnurapet AT fedoraproject.org, IRC: misha on freenode
https://fedoraproject.org/wiki/shnurapet, GPG: 00217306
2011/6/25 Felix Fietkau <[email protected]>:
> On 2011-06-25 4:08 PM, Misha Shnurapet wrote:
>>
>> Hi.
>>
>> I have a little problem. I replaced the old BCM4312 card on my Dell mini
>> 1011 (10v) with:
>> 03:00.0 Network controller: Atheros Communications Inc. AR928X Wireless
>> Network Adapter (PCI-Express) (rev 01)
>>
>> But it won't work.
>>
>> First it crashed Linux:
>> http://pastebin.com/YmEGcPK8
>>
>> Then I installed a system update:
>> http://funkyimg.com/u2/879/849/2.png
>> http://pastebin.com/hWG6u7VJ
>>
>> And now it is:
>>
>> [ ? 30.589243] ath9k 0000:03:00.0: PCI INT A -> ?GSI 17 (level, low) ->
>> ?IRQ 17
>> [ ? 30.589269] ath9k 0000:03:00.0: setting latency timer to 64
>> [ ? 30.594884] ath: address test failed addr: 0x00008000 - wr:0xaaaaaaaa
>> != rd:0xaaaa2aaa
this looks really wrong if the memory test itself fails, then all
those REG_READ, REG_WRITES are unreliable and this may be the reason
that your gettsf64 looks weird and hits a warning. also did you try
what Felix had suggested?
>> [ ? 30.594898] ath: Unable to initialize hardware; initialization status:
>> -19
>> [ ? 30.594913] ath9k 0000:03:00.0: Failed to initialize device
>> [ ? 30.594991] ath9k 0000:03:00.0: PCI INT A disabled
>>
>> lsusb:
>> http://pastebin.com/JHYZiDhr
>>
>> Installing the latest stable compat-wireless from source didn't help
>> (bleeding edge won't build).
>>
>> I would appreciate if you help me.
>
> Looks like a hardware issue to me. Try removing the card and plugging it
> back in.
>
> - Felix
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to [email protected]
> More majordomo info at ?http://vger.kernel.org/majordomo-info.html
>
--
shafi
On 2011-06-25 4:08 PM, Misha Shnurapet wrote:
> Hi.
>
> I have a little problem. I replaced the old BCM4312 card on my Dell mini 1011 (10v) with:
> 03:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01)
>
> But it won't work.
>
> First it crashed Linux:
> http://pastebin.com/YmEGcPK8
>
> Then I installed a system update:
> http://funkyimg.com/u2/879/849/2.png
> http://pastebin.com/hWG6u7VJ
>
> And now it is:
>
> [ 30.589243] ath9k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> [ 30.589269] ath9k 0000:03:00.0: setting latency timer to 64
> [ 30.594884] ath: address test failed addr: 0x00008000 - wr:0xaaaaaaaa != rd:0xaaaa2aaa
> [ 30.594898] ath: Unable to initialize hardware; initialization status: -19
> [ 30.594913] ath9k 0000:03:00.0: Failed to initialize device
> [ 30.594991] ath9k 0000:03:00.0: PCI INT A disabled
>
> lsusb:
> http://pastebin.com/JHYZiDhr
>
> Installing the latest stable compat-wireless from source didn't help (bleeding edge won't build).
>
> I would appreciate if you help me.
Looks like a hardware issue to me. Try removing the card and plugging it
back in.
- Felix
