2019-02-20 10:12:51

by Stanislaw Gruszka

[permalink] [raw]
Subject: [PATCH 1/3] mt76usb: allow mt76u_bulk_msg be used for reads

Extend mt76u_bulk_msg() such it can be used for synchronous bulk reads.

Signed-off-by: Stanislaw Gruszka <[email protected]>
---
drivers/net/wireless/mediatek/mt76/mt76.h | 13 ++++++++++---
drivers/net/wireless/mediatek/mt76/mt76x02_usb_mcu.c | 4 ++--
2 files changed, 12 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h b/drivers/net/wireless/mediatek/mt76/mt76.h
index f55dc621e060..45e44bcaa523 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76.h
@@ -729,7 +729,8 @@ static inline u8 q2ep(u8 qid)
}

static inline int
-mt76u_bulk_msg(struct mt76_dev *dev, void *data, int len, int timeout)
+mt76u_bulk_msg(struct mt76_dev *dev, void *data, int len, int *actual_len,
+ int timeout)
{
struct usb_interface *intf = to_usb_interface(dev->dev);
struct usb_device *udev = interface_to_usbdev(intf);
@@ -737,8 +738,14 @@ mt76u_bulk_msg(struct mt76_dev *dev, void *data, int len, int timeout)
unsigned int pipe;
int sent;

- pipe = usb_sndbulkpipe(udev, usb->out_ep[MT_EP_OUT_INBAND_CMD]);
- return usb_bulk_msg(udev, pipe, data, len, &sent, timeout);
+ if (actual_len) {
+ pipe = usb_rcvbulkpipe(udev, usb->in_ep[MT_EP_IN_CMD_RESP]);
+ } else {
+ actual_len = &sent;
+ pipe = usb_sndbulkpipe(udev, usb->out_ep[MT_EP_OUT_INBAND_CMD]);
+ }
+
+ return usb_bulk_msg(udev, pipe, data, len, actual_len, timeout);
}

int mt76u_vendor_request(struct mt76_dev *dev, u8 req,
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_usb_mcu.c b/drivers/net/wireless/mediatek/mt76/mt76x02_usb_mcu.c
index e469e383cb88..f497c8e4332a 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x02_usb_mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x02_usb_mcu.c
@@ -126,7 +126,7 @@ __mt76x02u_mcu_send_msg(struct mt76_dev *dev, struct sk_buff *skb,
if (ret)
return ret;

- ret = mt76u_bulk_msg(dev, skb->data, skb->len, 500);
+ ret = mt76u_bulk_msg(dev, skb->data, skb->len, NULL, 500);
if (ret)
return ret;

@@ -271,7 +271,7 @@ __mt76x02u_mcu_fw_send_data(struct mt76x02_dev *dev, u8 *data,

data_len = MT_CMD_HDR_LEN + len + sizeof(info);

- err = mt76u_bulk_msg(&dev->mt76, data, data_len, 1000);
+ err = mt76u_bulk_msg(&dev->mt76, data, data_len, NULL, 1000);
if (err) {
dev_err(dev->mt76.dev, "firmware upload failed: %d\n", err);
return err;
--
2.7.5



2019-02-20 10:12:56

by Stanislaw Gruszka

[permalink] [raw]
Subject: [PATCH 2/3] mt76usb: use synchronous msg for mcu command responses

Use usb_bulk_msg for reading MCU command responses. This simplify code
a lot.

Together with 97a3005759c ("mt76usb: allow mt76u_bulk_msg be used
for reads") it also fix possible problems with rx data buffers
not being aligned and contained within single page. After doing
page_frag_alloc(1024) consecutive page_frag_alloc(PAGE_SIZE) will
alloc PAGE_SIZE buffer at PAGE_SIZE - 1024 offset.

Signed-off-by: Stanislaw Gruszka <[email protected]>
---
drivers/net/wireless/mediatek/mt76/mt76.h | 3 +-
drivers/net/wireless/mediatek/mt76/mt76x0/usb.c | 11 --------
.../net/wireless/mediatek/mt76/mt76x02_usb_mcu.c | 32 +++++++---------------
drivers/net/wireless/mediatek/mt76/mt76x2/usb.c | 11 --------
drivers/net/wireless/mediatek/mt76/usb.c | 1 -
drivers/net/wireless/mediatek/mt76/usb_mcu.c | 31 +++------------------
6 files changed, 15 insertions(+), 74 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h b/drivers/net/wireless/mediatek/mt76/mt76.h
index 45e44bcaa523..ce53069461ec 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76.h
@@ -384,8 +384,7 @@ struct mt76_usb {

struct mt76u_mcu {
struct mutex mutex;
- struct completion cmpl;
- struct mt76u_buf res;
+ u8 *data;
u32 msg_seq;

/* multiple reads */
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/usb.c b/drivers/net/wireless/mediatek/mt76/mt76x0/usb.c
index da9d05f6074d..f0c33890f1a5 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x0/usb.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/usb.c
@@ -311,13 +311,11 @@ static int __maybe_unused mt76x0_suspend(struct usb_interface *usb_intf,
pm_message_t state)
{
struct mt76x02_dev *dev = usb_get_intfdata(usb_intf);
- struct mt76_usb *usb = &dev->mt76.usb;

mt76u_stop_queues(&dev->mt76);
mt76x0u_mac_stop(dev);
clear_bit(MT76_STATE_MCU_RUNNING, &dev->mt76.state);
mt76x0_chip_onoff(dev, false, false);
- usb_kill_urb(usb->mcu.res.urb);

return 0;
}
@@ -328,15 +326,6 @@ static int __maybe_unused mt76x0_resume(struct usb_interface *usb_intf)
struct mt76_usb *usb = &dev->mt76.usb;
int ret;

- reinit_completion(&usb->mcu.cmpl);
- ret = mt76u_submit_buf(&dev->mt76, USB_DIR_IN,
- MT_EP_IN_CMD_RESP,
- &usb->mcu.res, GFP_KERNEL,
- mt76u_mcu_complete_urb,
- &usb->mcu.cmpl);
- if (ret < 0)
- goto err;
-
ret = mt76u_submit_rx_buffers(&dev->mt76);
if (ret < 0)
goto err;
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_usb_mcu.c b/drivers/net/wireless/mediatek/mt76/mt76x02_usb_mcu.c
index f497c8e4332a..0cb8751321a1 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x02_usb_mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x02_usb_mcu.c
@@ -61,33 +61,21 @@ mt76x02u_multiple_mcu_reads(struct mt76_dev *dev, u8 *data, int len)
static int mt76x02u_mcu_wait_resp(struct mt76_dev *dev, u8 seq)
{
struct mt76_usb *usb = &dev->usb;
- struct mt76u_buf *buf = &usb->mcu.res;
- struct urb *urb = buf->urb;
- u8 *data = buf->buf;
- int i, ret;
+ u8 *data = usb->mcu.data;
+ int i, len, ret;
u32 rxfce;

for (i = 0; i < 5; i++) {
- if (!wait_for_completion_timeout(&usb->mcu.cmpl,
- msecs_to_jiffies(300)))
+ ret = mt76u_bulk_msg(dev, data, MCU_RESP_URB_SIZE, &len, 300);
+ if (ret == -ETIMEDOUT)
continue;
-
- if (urb->status)
- return -EIO;
+ if (ret)
+ goto out;

if (usb->mcu.rp)
- mt76x02u_multiple_mcu_reads(dev, data + 4,
- urb->actual_length - 8);
+ mt76x02u_multiple_mcu_reads(dev, data + 4, len - 8);

rxfce = get_unaligned_le32(data);
- ret = mt76u_submit_buf(dev, USB_DIR_IN,
- MT_EP_IN_CMD_RESP,
- buf, GFP_KERNEL,
- mt76u_mcu_complete_urb,
- &usb->mcu.cmpl);
- if (ret)
- return ret;
-
if (seq == FIELD_GET(MT_RX_FCE_INFO_CMD_SEQ, rxfce) &&
FIELD_GET(MT_RX_FCE_INFO_EVT_TYPE, rxfce) == EVT_CMD_DONE)
return 0;
@@ -96,9 +84,9 @@ static int mt76x02u_mcu_wait_resp(struct mt76_dev *dev, u8 seq)
FIELD_GET(MT_RX_FCE_INFO_EVT_TYPE, rxfce),
seq, FIELD_GET(MT_RX_FCE_INFO_CMD_SEQ, rxfce));
}
-
- dev_err(dev->dev, "error: %s timed out\n", __func__);
- return -ETIMEDOUT;
+out:
+ dev_err(dev->dev, "error: %s failed with %d\n", __func__, ret);
+ return ret;
}

static int
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2/usb.c b/drivers/net/wireless/mediatek/mt76/mt76x2/usb.c
index f81a85e96922..ddb6b2c48e01 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x2/usb.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x2/usb.c
@@ -100,11 +100,9 @@ static int __maybe_unused mt76x2u_suspend(struct usb_interface *intf,
pm_message_t state)
{
struct mt76x02_dev *dev = usb_get_intfdata(intf);
- struct mt76_usb *usb = &dev->mt76.usb;

mt76u_stop_queues(&dev->mt76);
mt76x2u_stop_hw(dev);
- usb_kill_urb(usb->mcu.res.urb);

return 0;
}
@@ -115,15 +113,6 @@ static int __maybe_unused mt76x2u_resume(struct usb_interface *intf)
struct mt76_usb *usb = &dev->mt76.usb;
int err;

- reinit_completion(&usb->mcu.cmpl);
- err = mt76u_submit_buf(&dev->mt76, USB_DIR_IN,
- MT_EP_IN_CMD_RESP,
- &usb->mcu.res, GFP_KERNEL,
- mt76u_mcu_complete_urb,
- &usb->mcu.cmpl);
- if (err < 0)
- goto err;
-
err = mt76u_submit_rx_buffers(&dev->mt76);
if (err < 0)
goto err;
diff --git a/drivers/net/wireless/mediatek/mt76/usb.c b/drivers/net/wireless/mediatek/mt76/usb.c
index 78191968b4fa..5c3b7f735aae 100644
--- a/drivers/net/wireless/mediatek/mt76/usb.c
+++ b/drivers/net/wireless/mediatek/mt76/usb.c
@@ -933,7 +933,6 @@ int mt76u_init(struct mt76_dev *dev,
INIT_DELAYED_WORK(&usb->stat_work, mt76u_tx_status_data);
skb_queue_head_init(&dev->rx_skb[MT_RXQ_MAIN]);

- init_completion(&usb->mcu.cmpl);
mutex_init(&usb->mcu.mutex);

mutex_init(&usb->usb_ctrl_mtx);
diff --git a/drivers/net/wireless/mediatek/mt76/usb_mcu.c b/drivers/net/wireless/mediatek/mt76/usb_mcu.c
index 72c8607da4b4..747231edc57d 100644
--- a/drivers/net/wireless/mediatek/mt76/usb_mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/usb_mcu.c
@@ -16,42 +16,19 @@

#include "mt76.h"

-void mt76u_mcu_complete_urb(struct urb *urb)
-{
- struct completion *cmpl = urb->context;
-
- complete(cmpl);
-}
-EXPORT_SYMBOL_GPL(mt76u_mcu_complete_urb);
-
int mt76u_mcu_init_rx(struct mt76_dev *dev)
{
struct mt76_usb *usb = &dev->usb;
- int err;

- err = mt76u_buf_alloc(dev, &usb->mcu.res, MCU_RESP_URB_SIZE,
- MCU_RESP_URB_SIZE, GFP_KERNEL);
- if (err < 0)
- return err;
-
- err = mt76u_submit_buf(dev, USB_DIR_IN, MT_EP_IN_CMD_RESP,
- &usb->mcu.res, GFP_KERNEL,
- mt76u_mcu_complete_urb,
- &usb->mcu.cmpl);
- if (err < 0)
- mt76u_buf_free(&usb->mcu.res);
-
- return err;
+ usb->mcu.data = kmalloc(MCU_RESP_URB_SIZE, GFP_KERNEL);
+ return usb->mcu.data ? 0 : -ENOMEM;
}
EXPORT_SYMBOL_GPL(mt76u_mcu_init_rx);

void mt76u_mcu_deinit(struct mt76_dev *dev)
{
- struct mt76u_buf *buf = &dev->usb.mcu.res;
+ struct mt76_usb *usb = &dev->usb;

- if (buf->urb) {
- usb_kill_urb(buf->urb);
- mt76u_buf_free(buf);
- }
+ kfree(usb->mcu.data);
}
EXPORT_SYMBOL_GPL(mt76u_mcu_deinit);
--
2.7.5


2019-02-20 10:12:59

by Stanislaw Gruszka

[permalink] [raw]
Subject: [PATCH 3/3] mt76usb: remove usb_mcu.c

Don't need separate file just for kmalloc/kfree.

Signed-off-by: Stanislaw Gruszka <[email protected]>
---
drivers/net/wireless/mediatek/mt76/mt76.h | 2 --
drivers/net/wireless/mediatek/mt76/mt76x0/usb.c | 5 ----
.../net/wireless/mediatek/mt76/mt76x2/usb_init.c | 5 ----
drivers/net/wireless/mediatek/mt76/usb.c | 8 +++++
drivers/net/wireless/mediatek/mt76/usb_mcu.c | 34 ----------------------
5 files changed, 8 insertions(+), 46 deletions(-)
delete mode 100644 drivers/net/wireless/mediatek/mt76/usb_mcu.c

diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h b/drivers/net/wireless/mediatek/mt76/mt76.h
index ce53069461ec..972f0ca7c818 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76.h
@@ -774,7 +774,5 @@ struct sk_buff *mt76_mcu_get_response(struct mt76_dev *dev,
unsigned long expires);

void mt76u_mcu_complete_urb(struct urb *urb);
-int mt76u_mcu_init_rx(struct mt76_dev *dev);
-void mt76u_mcu_deinit(struct mt76_dev *dev);

#endif
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/usb.c b/drivers/net/wireless/mediatek/mt76/mt76x0/usb.c
index f0c33890f1a5..91718647da02 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x0/usb.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/usb.c
@@ -79,7 +79,6 @@ static void mt76x0u_cleanup(struct mt76x02_dev *dev)
clear_bit(MT76_STATE_INITIALIZED, &dev->mt76.state);
mt76x0_chip_onoff(dev, false, false);
mt76u_queues_deinit(&dev->mt76);
- mt76u_mcu_deinit(&dev->mt76);
}

static void mt76x0u_mac_stop(struct mt76x02_dev *dev)
@@ -193,10 +192,6 @@ static int mt76x0u_register_device(struct mt76x02_dev *dev)
if (err < 0)
goto out_err;

- err = mt76u_mcu_init_rx(&dev->mt76);
- if (err < 0)
- goto out_err;
-
err = mt76x0u_init_hardware(dev);
if (err < 0)
goto out_err;
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2/usb_init.c b/drivers/net/wireless/mediatek/mt76/mt76x2/usb_init.c
index 090aaf71b3ef..1da90e58d942 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x2/usb_init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x2/usb_init.c
@@ -214,10 +214,6 @@ int mt76x2u_register_device(struct mt76x02_dev *dev)
if (err < 0)
goto fail;

- err = mt76u_mcu_init_rx(&dev->mt76);
- if (err < 0)
- goto fail;
-
err = mt76x2u_init_hardware(dev);
if (err < 0)
goto fail;
@@ -259,5 +255,4 @@ void mt76x2u_cleanup(struct mt76x02_dev *dev)
mt76x02_mcu_set_radio_state(dev, false);
mt76x2u_stop_hw(dev);
mt76u_queues_deinit(&dev->mt76);
- mt76u_mcu_deinit(&dev->mt76);
}
diff --git a/drivers/net/wireless/mediatek/mt76/usb.c b/drivers/net/wireless/mediatek/mt76/usb.c
index 5c3b7f735aae..4fe025b92302 100644
--- a/drivers/net/wireless/mediatek/mt76/usb.c
+++ b/drivers/net/wireless/mediatek/mt76/usb.c
@@ -577,9 +577,14 @@ EXPORT_SYMBOL_GPL(mt76u_submit_rx_buffers);

static int mt76u_alloc_rx(struct mt76_dev *dev)
{
+ struct mt76_usb *usb = &dev->usb;
struct mt76_queue *q = &dev->q_rx[MT_RXQ_MAIN];
int i, err;

+ usb->mcu.data = kmalloc(MCU_RESP_URB_SIZE, GFP_KERNEL);
+ if (usb->mcu.data)
+ return -ENOMEM;
+
spin_lock_init(&q->rx_page_lock);
spin_lock_init(&q->lock);
q->entry = devm_kcalloc(dev->dev,
@@ -610,6 +615,7 @@ static int mt76u_alloc_rx(struct mt76_dev *dev)

static void mt76u_free_rx(struct mt76_dev *dev)
{
+ struct mt76_usb *usb = &dev->usb;
struct mt76_queue *q = &dev->q_rx[MT_RXQ_MAIN];
struct page *page;
int i;
@@ -626,6 +632,8 @@ static void mt76u_free_rx(struct mt76_dev *dev)
memset(&q->rx_page, 0, sizeof(q->rx_page));
out:
spin_unlock_bh(&q->rx_page_lock);
+
+ kfree(usb->mcu.data);
}

static void mt76u_stop_rx(struct mt76_dev *dev)
diff --git a/drivers/net/wireless/mediatek/mt76/usb_mcu.c b/drivers/net/wireless/mediatek/mt76/usb_mcu.c
deleted file mode 100644
index 747231edc57d..000000000000
--- a/drivers/net/wireless/mediatek/mt76/usb_mcu.c
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Copyright (C) 2018 Lorenzo Bianconi <[email protected]>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include "mt76.h"
-
-int mt76u_mcu_init_rx(struct mt76_dev *dev)
-{
- struct mt76_usb *usb = &dev->usb;
-
- usb->mcu.data = kmalloc(MCU_RESP_URB_SIZE, GFP_KERNEL);
- return usb->mcu.data ? 0 : -ENOMEM;
-}
-EXPORT_SYMBOL_GPL(mt76u_mcu_init_rx);
-
-void mt76u_mcu_deinit(struct mt76_dev *dev)
-{
- struct mt76_usb *usb = &dev->usb;
-
- kfree(usb->mcu.data);
-}
-EXPORT_SYMBOL_GPL(mt76u_mcu_deinit);
--
2.7.5


2019-02-20 10:31:43

by Lorenzo Bianconi

[permalink] [raw]
Subject: Re: [PATCH 1/3] mt76usb: allow mt76u_bulk_msg be used for reads

> Extend mt76u_bulk_msg() such it can be used for synchronous bulk reads.
>
> Signed-off-by: Stanislaw Gruszka <[email protected]>
> ---
> drivers/net/wireless/mediatek/mt76/mt76.h | 13 ++++++++++---
> drivers/net/wireless/mediatek/mt76/mt76x02_usb_mcu.c | 4 ++--
> 2 files changed, 12 insertions(+), 5 deletions(-)
>

[...]

> @@ -737,8 +738,14 @@ mt76u_bulk_msg(struct mt76_dev *dev, void *data, int len, int timeout)
> unsigned int pipe;
> int sent;
>
> - pipe = usb_sndbulkpipe(udev, usb->out_ep[MT_EP_OUT_INBAND_CMD]);
> - return usb_bulk_msg(udev, pipe, data, len, &sent, timeout);
> + if (actual_len) {
> + pipe = usb_rcvbulkpipe(udev, usb->in_ep[MT_EP_IN_CMD_RESP]);
> + } else {
> + actual_len = &sent;
> + pipe = usb_sndbulkpipe(udev, usb->out_ep[MT_EP_OUT_INBAND_CMD]);

Hi Stanislaw,

I guess you can drop sent here since even if actual_len is NULL it will be managed
by usb_start_wait_urb()

Regards,
Lorenzo

> + }
> +
> + return usb_bulk_msg(udev, pipe, data, len, actual_len, timeout);
> }
>
> int mt76u_vendor_request(struct mt76_dev *dev, u8 req,
> diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_usb_mcu.c b/drivers/net/wireless/mediatek/mt76/mt76x02_usb_mcu.c
> index e469e383cb88..f497c8e4332a 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt76x02_usb_mcu.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt76x02_usb_mcu.c
> @@ -126,7 +126,7 @@ __mt76x02u_mcu_send_msg(struct mt76_dev *dev, struct sk_buff *skb,
> if (ret)
> return ret;
>
> - ret = mt76u_bulk_msg(dev, skb->data, skb->len, 500);
> + ret = mt76u_bulk_msg(dev, skb->data, skb->len, NULL, 500);
> if (ret)
> return ret;
>
> @@ -271,7 +271,7 @@ __mt76x02u_mcu_fw_send_data(struct mt76x02_dev *dev, u8 *data,
>
> data_len = MT_CMD_HDR_LEN + len + sizeof(info);
>
> - err = mt76u_bulk_msg(&dev->mt76, data, data_len, 1000);
> + err = mt76u_bulk_msg(&dev->mt76, data, data_len, NULL, 1000);
> if (err) {
> dev_err(dev->mt76.dev, "firmware upload failed: %d\n", err);
> return err;
> --
> 2.7.5
>

2019-02-20 10:38:18

by Lorenzo Bianconi

[permalink] [raw]
Subject: Re: [PATCH 2/3] mt76usb: use synchronous msg for mcu command responses

> Use usb_bulk_msg for reading MCU command responses. This simplify code
> a lot.
>
> Together with 97a3005759c ("mt76usb: allow mt76u_bulk_msg be used
> for reads") it also fix possible problems with rx data buffers
> not being aligned and contained within single page. After doing
> page_frag_alloc(1024) consecutive page_frag_alloc(PAGE_SIZE) will
> alloc PAGE_SIZE buffer at PAGE_SIZE - 1024 offset.
>
> Signed-off-by: Stanislaw Gruszka <[email protected]>

Hi Stanislaw,

very nice simplification. I need to post a series and this patch will help
me a lot, thx :)
Just few comments inline

Regards,
Lorenzo

> ---
> drivers/net/wireless/mediatek/mt76/mt76.h | 3 +-
> drivers/net/wireless/mediatek/mt76/mt76x0/usb.c | 11 --------
> .../net/wireless/mediatek/mt76/mt76x02_usb_mcu.c | 32 +++++++---------------
> drivers/net/wireless/mediatek/mt76/mt76x2/usb.c | 11 --------
> drivers/net/wireless/mediatek/mt76/usb.c | 1 -
> drivers/net/wireless/mediatek/mt76/usb_mcu.c | 31 +++------------------
> 6 files changed, 15 insertions(+), 74 deletions(-)
>
> diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h b/drivers/net/wireless/mediatek/mt76/mt76.h
> index 45e44bcaa523..ce53069461ec 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt76.h
> +++ b/drivers/net/wireless/mediatek/mt76/mt76.h
> @@ -384,8 +384,7 @@ struct mt76_usb {
>
> struct mt76u_mcu {
> struct mutex mutex;
> - struct completion cmpl;
> - struct mt76u_buf res;
> + u8 *data;
> u32 msg_seq;
>
> /* multiple reads */
> diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/usb.c b/drivers/net/wireless/mediatek/mt76/mt76x0/usb.c
> index da9d05f6074d..f0c33890f1a5 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt76x0/usb.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt76x0/usb.c
> @@ -311,13 +311,11 @@ static int __maybe_unused mt76x0_suspend(struct usb_interface *usb_intf,
> pm_message_t state)
> {
> struct mt76x02_dev *dev = usb_get_intfdata(usb_intf);
> - struct mt76_usb *usb = &dev->mt76.usb;
>
> mt76u_stop_queues(&dev->mt76);
> mt76x0u_mac_stop(dev);
> clear_bit(MT76_STATE_MCU_RUNNING, &dev->mt76.state);
> mt76x0_chip_onoff(dev, false, false);
> - usb_kill_urb(usb->mcu.res.urb);
>
> return 0;
> }
> @@ -328,15 +326,6 @@ static int __maybe_unused mt76x0_resume(struct usb_interface *usb_intf)
> struct mt76_usb *usb = &dev->mt76.usb;
> int ret;
>
> - reinit_completion(&usb->mcu.cmpl);
> - ret = mt76u_submit_buf(&dev->mt76, USB_DIR_IN,
> - MT_EP_IN_CMD_RESP,
> - &usb->mcu.res, GFP_KERNEL,
> - mt76u_mcu_complete_urb,
> - &usb->mcu.cmpl);
> - if (ret < 0)
> - goto err;
> -
> ret = mt76u_submit_rx_buffers(&dev->mt76);
> if (ret < 0)
> goto err;
> diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_usb_mcu.c b/drivers/net/wireless/mediatek/mt76/mt76x02_usb_mcu.c
> index f497c8e4332a..0cb8751321a1 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt76x02_usb_mcu.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt76x02_usb_mcu.c
> @@ -61,33 +61,21 @@ mt76x02u_multiple_mcu_reads(struct mt76_dev *dev, u8 *data, int len)
> static int mt76x02u_mcu_wait_resp(struct mt76_dev *dev, u8 seq)
> {
> struct mt76_usb *usb = &dev->usb;
> - struct mt76u_buf *buf = &usb->mcu.res;
> - struct urb *urb = buf->urb;
> - u8 *data = buf->buf;
> - int i, ret;
> + u8 *data = usb->mcu.data;
> + int i, len, ret;
> u32 rxfce;
>
> for (i = 0; i < 5; i++) {
> - if (!wait_for_completion_timeout(&usb->mcu.cmpl,
> - msecs_to_jiffies(300)))
> + ret = mt76u_bulk_msg(dev, data, MCU_RESP_URB_SIZE, &len, 300);
> + if (ret == -ETIMEDOUT)
> continue;
> -
> - if (urb->status)
> - return -EIO;
> + if (ret)
> + goto out;
>
> if (usb->mcu.rp)
> - mt76x02u_multiple_mcu_reads(dev, data + 4,
> - urb->actual_length - 8);
> + mt76x02u_multiple_mcu_reads(dev, data + 4, len - 8);
>
> rxfce = get_unaligned_le32(data);
> - ret = mt76u_submit_buf(dev, USB_DIR_IN,
> - MT_EP_IN_CMD_RESP,
> - buf, GFP_KERNEL,
> - mt76u_mcu_complete_urb,
> - &usb->mcu.cmpl);
> - if (ret)
> - return ret;
> -
> if (seq == FIELD_GET(MT_RX_FCE_INFO_CMD_SEQ, rxfce) &&
> FIELD_GET(MT_RX_FCE_INFO_EVT_TYPE, rxfce) == EVT_CMD_DONE)
> return 0;
> @@ -96,9 +84,9 @@ static int mt76x02u_mcu_wait_resp(struct mt76_dev *dev, u8 seq)
> FIELD_GET(MT_RX_FCE_INFO_EVT_TYPE, rxfce),
> seq, FIELD_GET(MT_RX_FCE_INFO_CMD_SEQ, rxfce));
> }
> -
> - dev_err(dev->dev, "error: %s timed out\n", __func__);
> - return -ETIMEDOUT;
> +out:
> + dev_err(dev->dev, "error: %s failed with %d\n", __func__, ret);
> + return ret;
> }
>
> static int
> diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2/usb.c b/drivers/net/wireless/mediatek/mt76/mt76x2/usb.c
> index f81a85e96922..ddb6b2c48e01 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt76x2/usb.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt76x2/usb.c
> @@ -100,11 +100,9 @@ static int __maybe_unused mt76x2u_suspend(struct usb_interface *intf,
> pm_message_t state)
> {
> struct mt76x02_dev *dev = usb_get_intfdata(intf);
> - struct mt76_usb *usb = &dev->mt76.usb;
>
> mt76u_stop_queues(&dev->mt76);
> mt76x2u_stop_hw(dev);
> - usb_kill_urb(usb->mcu.res.urb);
>
> return 0;
> }
> @@ -115,15 +113,6 @@ static int __maybe_unused mt76x2u_resume(struct usb_interface *intf)
> struct mt76_usb *usb = &dev->mt76.usb;
> int err;
>
> - reinit_completion(&usb->mcu.cmpl);
> - err = mt76u_submit_buf(&dev->mt76, USB_DIR_IN,
> - MT_EP_IN_CMD_RESP,
> - &usb->mcu.res, GFP_KERNEL,
> - mt76u_mcu_complete_urb,
> - &usb->mcu.cmpl);
> - if (err < 0)
> - goto err;
> -
> err = mt76u_submit_rx_buffers(&dev->mt76);
> if (err < 0)
> goto err;
> diff --git a/drivers/net/wireless/mediatek/mt76/usb.c b/drivers/net/wireless/mediatek/mt76/usb.c
> index 78191968b4fa..5c3b7f735aae 100644
> --- a/drivers/net/wireless/mediatek/mt76/usb.c
> +++ b/drivers/net/wireless/mediatek/mt76/usb.c
> @@ -933,7 +933,6 @@ int mt76u_init(struct mt76_dev *dev,
> INIT_DELAYED_WORK(&usb->stat_work, mt76u_tx_status_data);
> skb_queue_head_init(&dev->rx_skb[MT_RXQ_MAIN]);
>
> - init_completion(&usb->mcu.cmpl);
> mutex_init(&usb->mcu.mutex);
>
> mutex_init(&usb->usb_ctrl_mtx);
> diff --git a/drivers/net/wireless/mediatek/mt76/usb_mcu.c b/drivers/net/wireless/mediatek/mt76/usb_mcu.c
> index 72c8607da4b4..747231edc57d 100644
> --- a/drivers/net/wireless/mediatek/mt76/usb_mcu.c
> +++ b/drivers/net/wireless/mediatek/mt76/usb_mcu.c
> @@ -16,42 +16,19 @@
>
> #include "mt76.h"
>
> -void mt76u_mcu_complete_urb(struct urb *urb)
> -{
> - struct completion *cmpl = urb->context;
> -
> - complete(cmpl);
> -}
> -EXPORT_SYMBOL_GPL(mt76u_mcu_complete_urb);
> -
> int mt76u_mcu_init_rx(struct mt76_dev *dev)
> {
> struct mt76_usb *usb = &dev->usb;
> - int err;
>
> - err = mt76u_buf_alloc(dev, &usb->mcu.res, MCU_RESP_URB_SIZE,
> - MCU_RESP_URB_SIZE, GFP_KERNEL);
> - if (err < 0)
> - return err;
> -
> - err = mt76u_submit_buf(dev, USB_DIR_IN, MT_EP_IN_CMD_RESP,
> - &usb->mcu.res, GFP_KERNEL,
> - mt76u_mcu_complete_urb,
> - &usb->mcu.cmpl);
> - if (err < 0)
> - mt76u_buf_free(&usb->mcu.res);
> -
> - return err;
> + usb->mcu.data = kmalloc(MCU_RESP_URB_SIZE, GFP_KERNEL);

if you use devm_kmalloc() you can drop mt76u_mcu_deinit

Regards,
Lorenzo

> + return usb->mcu.data ? 0 : -ENOMEM;
> }
> EXPORT_SYMBOL_GPL(mt76u_mcu_init_rx);
>
> void mt76u_mcu_deinit(struct mt76_dev *dev)
> {
> - struct mt76u_buf *buf = &dev->usb.mcu.res;
> + struct mt76_usb *usb = &dev->usb;
>
> - if (buf->urb) {
> - usb_kill_urb(buf->urb);
> - mt76u_buf_free(buf);
> - }
> + kfree(usb->mcu.data);
> }
> EXPORT_SYMBOL_GPL(mt76u_mcu_deinit);
> --
> 2.7.5
>

2019-02-20 10:41:58

by Lorenzo Bianconi

[permalink] [raw]
Subject: Re: [PATCH 3/3] mt76usb: remove usb_mcu.c

> Don't need separate file just for kmalloc/kfree.
>

same comments here kmalloc() --> devm_kmalloc().
Maybe this patch can be squashed with 2/3?

Regards,
Lorenzo

> Signed-off-by: Stanislaw Gruszka <[email protected]>
> ---
> drivers/net/wireless/mediatek/mt76/mt76.h | 2 --
> drivers/net/wireless/mediatek/mt76/mt76x0/usb.c | 5 ----
> .../net/wireless/mediatek/mt76/mt76x2/usb_init.c | 5 ----
> drivers/net/wireless/mediatek/mt76/usb.c | 8 +++++
> drivers/net/wireless/mediatek/mt76/usb_mcu.c | 34 ----------------------
> 5 files changed, 8 insertions(+), 46 deletions(-)
> delete mode 100644 drivers/net/wireless/mediatek/mt76/usb_mcu.c
>
> diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h b/drivers/net/wireless/mediatek/mt76/mt76.h
> index ce53069461ec..972f0ca7c818 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt76.h
> +++ b/drivers/net/wireless/mediatek/mt76/mt76.h
> @@ -774,7 +774,5 @@ struct sk_buff *mt76_mcu_get_response(struct mt76_dev *dev,
> unsigned long expires);
>
> void mt76u_mcu_complete_urb(struct urb *urb);
> -int mt76u_mcu_init_rx(struct mt76_dev *dev);
> -void mt76u_mcu_deinit(struct mt76_dev *dev);
>
> #endif
> diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/usb.c b/drivers/net/wireless/mediatek/mt76/mt76x0/usb.c
> index f0c33890f1a5..91718647da02 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt76x0/usb.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt76x0/usb.c
> @@ -79,7 +79,6 @@ static void mt76x0u_cleanup(struct mt76x02_dev *dev)
> clear_bit(MT76_STATE_INITIALIZED, &dev->mt76.state);
> mt76x0_chip_onoff(dev, false, false);
> mt76u_queues_deinit(&dev->mt76);
> - mt76u_mcu_deinit(&dev->mt76);
> }
>
> static void mt76x0u_mac_stop(struct mt76x02_dev *dev)
> @@ -193,10 +192,6 @@ static int mt76x0u_register_device(struct mt76x02_dev *dev)
> if (err < 0)
> goto out_err;
>
> - err = mt76u_mcu_init_rx(&dev->mt76);
> - if (err < 0)
> - goto out_err;
> -
> err = mt76x0u_init_hardware(dev);
> if (err < 0)
> goto out_err;
> diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2/usb_init.c b/drivers/net/wireless/mediatek/mt76/mt76x2/usb_init.c
> index 090aaf71b3ef..1da90e58d942 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt76x2/usb_init.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt76x2/usb_init.c
> @@ -214,10 +214,6 @@ int mt76x2u_register_device(struct mt76x02_dev *dev)
> if (err < 0)
> goto fail;
>
> - err = mt76u_mcu_init_rx(&dev->mt76);
> - if (err < 0)
> - goto fail;
> -
> err = mt76x2u_init_hardware(dev);
> if (err < 0)
> goto fail;
> @@ -259,5 +255,4 @@ void mt76x2u_cleanup(struct mt76x02_dev *dev)
> mt76x02_mcu_set_radio_state(dev, false);
> mt76x2u_stop_hw(dev);
> mt76u_queues_deinit(&dev->mt76);
> - mt76u_mcu_deinit(&dev->mt76);
> }
> diff --git a/drivers/net/wireless/mediatek/mt76/usb.c b/drivers/net/wireless/mediatek/mt76/usb.c
> index 5c3b7f735aae..4fe025b92302 100644
> --- a/drivers/net/wireless/mediatek/mt76/usb.c
> +++ b/drivers/net/wireless/mediatek/mt76/usb.c
> @@ -577,9 +577,14 @@ EXPORT_SYMBOL_GPL(mt76u_submit_rx_buffers);
>
> static int mt76u_alloc_rx(struct mt76_dev *dev)
> {
> + struct mt76_usb *usb = &dev->usb;
> struct mt76_queue *q = &dev->q_rx[MT_RXQ_MAIN];
> int i, err;
>
> + usb->mcu.data = kmalloc(MCU_RESP_URB_SIZE, GFP_KERNEL);
> + if (usb->mcu.data)
> + return -ENOMEM;
> +
> spin_lock_init(&q->rx_page_lock);
> spin_lock_init(&q->lock);
> q->entry = devm_kcalloc(dev->dev,
> @@ -610,6 +615,7 @@ static int mt76u_alloc_rx(struct mt76_dev *dev)
>
> static void mt76u_free_rx(struct mt76_dev *dev)
> {
> + struct mt76_usb *usb = &dev->usb;
> struct mt76_queue *q = &dev->q_rx[MT_RXQ_MAIN];
> struct page *page;
> int i;
> @@ -626,6 +632,8 @@ static void mt76u_free_rx(struct mt76_dev *dev)
> memset(&q->rx_page, 0, sizeof(q->rx_page));
> out:
> spin_unlock_bh(&q->rx_page_lock);
> +
> + kfree(usb->mcu.data);
> }
>
> static void mt76u_stop_rx(struct mt76_dev *dev)
> diff --git a/drivers/net/wireless/mediatek/mt76/usb_mcu.c b/drivers/net/wireless/mediatek/mt76/usb_mcu.c
> deleted file mode 100644
> index 747231edc57d..000000000000
> --- a/drivers/net/wireless/mediatek/mt76/usb_mcu.c
> +++ /dev/null
> @@ -1,34 +0,0 @@
> -/*
> - * Copyright (C) 2018 Lorenzo Bianconi <[email protected]>
> - *
> - * Permission to use, copy, modify, and/or distribute this software for any
> - * purpose with or without fee is hereby granted, provided that the above
> - * copyright notice and this permission notice appear in all copies.
> - *
> - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
> - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
> - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
> - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
> - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
> - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
> - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
> - */
> -
> -#include "mt76.h"
> -
> -int mt76u_mcu_init_rx(struct mt76_dev *dev)
> -{
> - struct mt76_usb *usb = &dev->usb;
> -
> - usb->mcu.data = kmalloc(MCU_RESP_URB_SIZE, GFP_KERNEL);
> - return usb->mcu.data ? 0 : -ENOMEM;
> -}
> -EXPORT_SYMBOL_GPL(mt76u_mcu_init_rx);
> -
> -void mt76u_mcu_deinit(struct mt76_dev *dev)
> -{
> - struct mt76_usb *usb = &dev->usb;
> -
> - kfree(usb->mcu.data);
> -}
> -EXPORT_SYMBOL_GPL(mt76u_mcu_deinit);
> --
> 2.7.5
>

2019-02-20 11:28:45

by Lorenzo Bianconi

[permalink] [raw]
Subject: Re: [PATCH 1/3] mt76usb: allow mt76u_bulk_msg be used for reads

> Extend mt76u_bulk_msg() such it can be used for synchronous bulk reads.
>
> Signed-off-by: Stanislaw Gruszka <[email protected]>
> ---

Hi Stanislaw,

testing this series I got the following error:

[ 3.448267] mt76x0u 1-1:1.0: ASIC revision: 76100002 MAC revision: 76502000
[ 3.451220] INFO: trying to register non-static key.
[ 3.452055] the code is fine but needs lockdep annotation.
[ 3.452945] turning off the locking correctness validator.
[ 3.453590] CPU: 0 PID: 18 Comm: kworker/0:1 Not tainted 5.0.0-rc4+ #2963
[ 3.454390] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
?-20180724_192412-buildhw-07.phx2.fedoraproject.org-1.fc29 04/01/2014
[ 3.455973] Workqueue: usb_hub_wq hub_event
[ 3.456642] Call Trace:
[ 3.456989] register_lock_class+0x4fd/0x510
[ 3.457619] ? mark_held_locks+0x4f/0x80
[ 3.458172] __lock_acquire+0x6c/0x1580
[ 3.458675] ? __mt76u_vendor_request+0xc0/0x110
[ 3.459302] ? find_held_lock+0x2d/0x90
[ 3.459802] lock_acquire+0x88/0x120
[ 3.460283] ? mt76u_queues_deinit+0x4e/0x120
[ 3.460875] _raw_spin_lock_bh+0x38/0x80
[ 3.461412] ? mt76u_queues_deinit+0x4e/0x120
[ 3.461999] mt76u_queues_deinit+0x4e/0x120
[ 3.462565] mt76x0u_probe+0x1e6/0x220
[ 3.463070] usb_probe_interface+0xa7/0x1d0
[ 3.463639] ? __driver_attach+0xd0/0xd0
[ 3.464167] really_probe+0xda/0x250
[ 3.464754] ? __driver_attach+0xd0/0xd0
[ 3.465285] bus_for_each_drv+0x66/0x90
[ 3.465801] __device_attach+0xa8/0xe0
[ 3.466309] bus_probe_device+0x9f/0xb0
[ 3.466880] device_add+0x3a2/0x5f0
[ 3.467338] usb_set_configuration+0x471/0x7d0
[ 3.467942] ? __driver_attach+0xd0/0xd0
[ 3.468454] generic_probe+0x48/0x70
[ 3.468929] really_probe+0xda/0x250
[ 3.469411] ? __driver_attach+0xd0/0xd0
[ 3.469931] bus_for_each_drv+0x66/0x90
[ 3.470433] __device_attach+0xa8/0xe0
[ 3.470920] bus_probe_device+0x9f/0xb0
[ 3.471420] device_add+0x3a2/0x5f0
[ 3.471875] usb_new_device+0x193/0x320
[ 3.472382] hub_event+0xbf7/0x1160
[ 3.472840] process_one_work+0x2a4/0x580
[ 3.473367] ? process_one_work+0x580/0x580
[ 3.473912] worker_thread+0x2d/0x3d0
[ 3.474390] ? process_one_work+0x580/0x580
[ 3.474940] kthread+0x115/0x130
[ 3.475392] ? kthread_create_on_node+0x40/0x40
[ 3.475968] ret_from_fork+0x3a/0x50
[ 3.476492] mt76x0u: probe of 1-1:1.0 failed with error -12

Regards,
Lorenzo

> drivers/net/wireless/mediatek/mt76/mt76.h | 13 ++++++++++---
> drivers/net/wireless/mediatek/mt76/mt76x02_usb_mcu.c | 4 ++--
> 2 files changed, 12 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h b/drivers/net/wireless/mediatek/mt76/mt76.h
> index f55dc621e060..45e44bcaa523 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt76.h
> +++ b/drivers/net/wireless/mediatek/mt76/mt76.h
> @@ -729,7 +729,8 @@ static inline u8 q2ep(u8 qid)
> }
>
> static inline int
> -mt76u_bulk_msg(struct mt76_dev *dev, void *data, int len, int timeout)
> +mt76u_bulk_msg(struct mt76_dev *dev, void *data, int len, int *actual_len,
> + int timeout)
> {
> struct usb_interface *intf = to_usb_interface(dev->dev);
> struct usb_device *udev = interface_to_usbdev(intf);
> @@ -737,8 +738,14 @@ mt76u_bulk_msg(struct mt76_dev *dev, void *data, int len, int timeout)
> unsigned int pipe;
> int sent;
>
> - pipe = usb_sndbulkpipe(udev, usb->out_ep[MT_EP_OUT_INBAND_CMD]);
> - return usb_bulk_msg(udev, pipe, data, len, &sent, timeout);
> + if (actual_len) {
> + pipe = usb_rcvbulkpipe(udev, usb->in_ep[MT_EP_IN_CMD_RESP]);
> + } else {
> + actual_len = &sent;
> + pipe = usb_sndbulkpipe(udev, usb->out_ep[MT_EP_OUT_INBAND_CMD]);
> + }
> +
> + return usb_bulk_msg(udev, pipe, data, len, actual_len, timeout);
> }
>
> int mt76u_vendor_request(struct mt76_dev *dev, u8 req,
> diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_usb_mcu.c b/drivers/net/wireless/mediatek/mt76/mt76x02_usb_mcu.c
> index e469e383cb88..f497c8e4332a 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt76x02_usb_mcu.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt76x02_usb_mcu.c
> @@ -126,7 +126,7 @@ __mt76x02u_mcu_send_msg(struct mt76_dev *dev, struct sk_buff *skb,
> if (ret)
> return ret;
>
> - ret = mt76u_bulk_msg(dev, skb->data, skb->len, 500);
> + ret = mt76u_bulk_msg(dev, skb->data, skb->len, NULL, 500);
> if (ret)
> return ret;
>
> @@ -271,7 +271,7 @@ __mt76x02u_mcu_fw_send_data(struct mt76x02_dev *dev, u8 *data,
>
> data_len = MT_CMD_HDR_LEN + len + sizeof(info);
>
> - err = mt76u_bulk_msg(&dev->mt76, data, data_len, 1000);
> + err = mt76u_bulk_msg(&dev->mt76, data, data_len, NULL, 1000);
> if (err) {
> dev_err(dev->mt76.dev, "firmware upload failed: %d\n", err);
> return err;
> --
> 2.7.5
>

2019-02-20 12:01:54

by Stanislaw Gruszka

[permalink] [raw]
Subject: Re: [PATCH 1/3] mt76usb: allow mt76u_bulk_msg be used for reads

On Wed, Feb 20, 2019 at 12:28:38PM +0100, Lorenzo Bianconi wrote:
> [ 3.476492] mt76x0u: probe of 1-1:1.0 failed with error -12

During rework of patch 3 I made silly mistake in

+ if (usb->mcu.data)
+ return -ENOMEM;

and seems I did not reload modules properly and only tested previous
revision of the set.

Stanislaw