2019-05-30 01:53:55

by Miaoqing Pan

[permalink] [raw]
Subject: [PATCH] ath10k: fix PCIE device wake up failed

Observed PCIE device wake up failed after ~120 iterations of
soft-reboot test. The error message is
"ath10k_pci 0000:01:00.0: failed to wake up device : -110"

The call trace as below:
ath10k_pci_probe -> ath10k_pci_force_wake -> ath10k_pci_wake_wait ->
ath10k_pci_is_awake

Once trigger the device to wake up, we will continuously check the RTC
state until it returns RTC_STATE_V_ON or timeout.

But for QCA99x0 chips, we use wrong value for RTC_STATE_V_ON.
Occasionally, we get 0x7 on the fist read, we thought as a failure
case, but actually is the right value, also verified with the spec.
So fix the issue by changing RTC_STATE_V_ON from 0x5 to 0x7, passed
~2000 iterations.

Tested HW: QCA9984

Signed-off-by: Miaoqing Pan <[email protected]>
---
drivers/net/wireless/ath/ath10k/hw.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/hw.c b/drivers/net/wireless/ath/ath10k/hw.c
index ad082b7..b242085 100644
--- a/drivers/net/wireless/ath/ath10k/hw.c
+++ b/drivers/net/wireless/ath/ath10k/hw.c
@@ -158,7 +158,7 @@
};

const struct ath10k_hw_values qca99x0_values = {
- .rtc_state_val_on = 5,
+ .rtc_state_val_on = 7,
.ce_count = 12,
.msi_assign_ce_max = 12,
.num_target_ce_config_wlan = 10,
--
1.9.1


2019-06-25 13:39:50

by Kalle Valo

[permalink] [raw]
Subject: Re: [PATCH] ath10k: fix PCIE device wake up failed

Miaoqing Pan <[email protected]> wrote:

> Observed PCIE device wake up failed after ~120 iterations of
> soft-reboot test. The error message is
> "ath10k_pci 0000:01:00.0: failed to wake up device : -110"
>
> The call trace as below:
> ath10k_pci_probe -> ath10k_pci_force_wake -> ath10k_pci_wake_wait ->
> ath10k_pci_is_awake
>
> Once trigger the device to wake up, we will continuously check the RTC
> state until it returns RTC_STATE_V_ON or timeout.
>
> But for QCA99x0 chips, we use wrong value for RTC_STATE_V_ON.
> Occasionally, we get 0x7 on the fist read, we thought as a failure
> case, but actually is the right value, also verified with the spec.
> So fix the issue by changing RTC_STATE_V_ON from 0x5 to 0x7, passed
> ~2000 iterations.
>
> Tested HW: QCA9984
>
> Signed-off-by: Miaoqing Pan <[email protected]>
> Signed-off-by: Kalle Valo <[email protected]>

Patch applied to ath-next branch of ath.git, thanks.

011d4111c8c6 ath10k: fix PCIE device wake up failed

--
https://patchwork.kernel.org/patch/10968039/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches