2019-05-31 10:02:41

by Lorenzo Bianconi

[permalink] [raw]

Subject: Re: [PATCH 1/2] mt76: mt7615: enable support for mesh

---

> Enable NL80211_IFTYPE_MESH_POINT and add its path.
>
> Signed-off-by: Ryder Lee <[email protected]>
> ---
> drivers/net/wireless/mediatek/mt76/mt7615/init.c | 6 ++++++
> drivers/net/wireless/mediatek/mt76/mt7615/main.c | 1 +
> drivers/net/wireless/mediatek/mt76/mt7615/mcu.c | 5 ++++-
> 3 files changed, 11 insertions(+), 1 deletion(-)
>

[...]

> diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/main.c b/drivers/net/wireless/mediatek/mt76/mt7615/main.c
> index b0bb7cc12385..585e67fa2728 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7615/main.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt7615/main.c
> @@ -37,6 +37,7 @@ static int get_omac_idx(enum nl80211_iftype type, u32 mask)
>
> switch (type) {
> case NL80211_IFTYPE_AP:
> + case NL80211_IFTYPE_MESH_POINT:
> /* ap use hw bssid 0 and ext bssid */
> if (~mask & BIT(HW_BSSID_0))
> return HW_BSSID_0;
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
> index 43f70195244c..8b8db526cb16 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
> @@ -754,6 +754,7 @@ int mt7615_mcu_set_bss_info(struct mt7615_dev *dev,
>
> switch (vif->type) {
> case NL80211_IFTYPE_AP:
> + case NL80211_IFTYPE_MESH_POINT:
> tx_wlan_idx = mvif->sta.wcid.idx;
> conn_type = CONNECTION_INFRA_AP;

Just out of curiosity, why not using CONNECTION_MESH_{AP,STA} here?
why not NETWORK_MESH?

> break;
> @@ -968,7 +969,8 @@ int mt7615_mcu_add_wtbl(struct mt7615_dev *dev, struct ieee80211_vif *vif,
> .rx_wtbl = {
> .tag = cpu_to_le16(WTBL_RX),
> .len = cpu_to_le16(sizeof(struct wtbl_rx)),
> - .rca1 = vif->type != NL80211_IFTYPE_AP,
> + .rca1 = vif->type != (NL80211_IFTYPE_AP ||
> + NL80211_IFTYPE_MESH_POINT),
> .rca2 = 1,
> .rv = 1,
> },
> @@ -1042,6 +1044,7 @@ static void sta_rec_convert_vif_type(enum nl80211_iftype type, u32 *conn_type)
> {
> switch (type) {
> case NL80211_IFTYPE_AP:
> + case NL80211_IFTYPE_MESH_POINT:
> if (conn_type)
> *conn_type = CONNECTION_INFRA_STA;
> break;

same here.

Regards,
Lorenzo

> --
> 2.18.0
>

---

Attachments:

(No filename) (2.22 kB)
signature.asc (235.00 B)
Download all attachments

2019-05-31 10:33:49

by Ryder Lee

[permalink] [raw]

Subject: Re: [PATCH 1/2] mt76: mt7615: enable support for mesh

---

On Fri, 2019-05-31 at 12:02 +0200, Lorenzo Bianconi wrote:
> > Enable NL80211_IFTYPE_MESH_POINT and add its path.
> >
> > Signed-off-by: Ryder Lee <[email protected]>
> > ---
> > drivers/net/wireless/mediatek/mt76/mt7615/init.c | 6 ++++++
> > drivers/net/wireless/mediatek/mt76/mt7615/main.c | 1 +
> > drivers/net/wireless/mediatek/mt76/mt7615/mcu.c | 5 ++++-
> > 3 files changed, 11 insertions(+), 1 deletion(-)
> >
>
> [...]
>
> > diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/main.c b/drivers/net/wireless/mediatek/mt76/mt7615/main.c
> > index b0bb7cc12385..585e67fa2728 100644
> > --- a/drivers/net/wireless/mediatek/mt76/mt7615/main.c
> > +++ b/drivers/net/wireless/mediatek/mt76/mt7615/main.c
> > @@ -37,6 +37,7 @@ static int get_omac_idx(enum nl80211_iftype type, u32 mask)
> >
> > switch (type) {
> > case NL80211_IFTYPE_AP:
> > + case NL80211_IFTYPE_MESH_POINT:
> > /* ap use hw bssid 0 and ext bssid */
> > if (~mask & BIT(HW_BSSID_0))
> > return HW_BSSID_0;
> > diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
> > index 43f70195244c..8b8db526cb16 100644
> > --- a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
> > +++ b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
> > @@ -754,6 +754,7 @@ int mt7615_mcu_set_bss_info(struct mt7615_dev *dev,
> >
> > switch (vif->type) {
> > case NL80211_IFTYPE_AP:
> > + case NL80211_IFTYPE_MESH_POINT:
> > tx_wlan_idx = mvif->sta.wcid.idx;
> > conn_type = CONNECTION_INFRA_AP;
>
> Just out of curiosity, why not using CONNECTION_MESH_{AP,STA} here?
> why not NETWORK_MESH?

Actually the CONNECTION_MESH_{AP,STA} are useless and I will send v2 to
remove them.

> > break;
> > @@ -968,7 +969,8 @@ int mt7615_mcu_add_wtbl(struct mt7615_dev *dev, struct ieee80211_vif *vif,
> > .rx_wtbl = {
> > .tag = cpu_to_le16(WTBL_RX),
> > .len = cpu_to_le16(sizeof(struct wtbl_rx)),
> > - .rca1 = vif->type != NL80211_IFTYPE_AP,
> > + .rca1 = vif->type != (NL80211_IFTYPE_AP ||
> > + NL80211_IFTYPE_MESH_POINT),
> > .rca2 = 1,
> > .rv = 1,
> > },
> > @@ -1042,6 +1044,7 @@ static void sta_rec_convert_vif_type(enum nl80211_iftype type, u32 *conn_type)
> > {
> > switch (type) {
> > case NL80211_IFTYPE_AP:
> > + case NL80211_IFTYPE_MESH_POINT:
> > if (conn_type)
> > *conn_type = CONNECTION_INFRA_STA;
> > break;
>
> same here.
>
> Regards,
> Lorenzo
>
> > --
> > 2.18.0
> >